Tabs are not saved to the output

Similar Questions

• Emails sent via Thunderbird are not saved on the e-mail server.

  I have a critical problem with the backup of the emails I sent to Thunderbird.

  The application works very well, that everyone sent mail is correctly saved in the folder "sent" located in the e-mail account of TB.
  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com), so whenever I have to reinstall the software, I lose all my outgoing emails. If I access my email on yahoo.com account and email from there, it is regularly saved in the sent folder there.

  I would be grateful if someone could
  (i) say me if it is a known problem, and if there is a way to remedy through Thunberdird server or Composition settings.
  (ii) if there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive. Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder? And I want to save the "Sent.msf" file as well?

  Thank you much for the help.
  L

  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com),.

  With a POP account, this is the expected behavior. Only the Inbox folder is visible on the server, all the other files are the.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_pop

  To access the other folders on the server, for example your sent folder, you need to configure your account as an IMAP account.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_imap

  so whenever I have to reinstall the software, I lose all my outgoing emails.

  You should not need to reinstall the software in the first place. And even if you do you will not lose any position, unless you deliberately remove your Thunderbird profile.
  With pop, all mail is local to your computer, including the "sent" folder.
  http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  If there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive.

  In fact, you must back up the entire profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring

  Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder?

  As said before, nothing is lost when reinstalling the application. If you want to move to a new computer by simply moving the profile.
  http://KB.mozillazine.org/Move_to_a_new_PC

  do I have to save the "Sent.msf" file as well?

  If you want to backup files individual mail, you don't need to save the *.msf files. They are just the index files and contain no mail. They are rebuild automatically when you start Thunderbird.
  In any case, to save the entire profile is the recommended method.

• Why the titles are not saved with the project? Where are they?

  CS5 PC.

  Why the titles are not saved with the project? Where are they? I can save them with the project?

  You can also configure a project basis including all titles.  When it's time to start a new project, open the template and change the name before starting to work.  In this way all the foundations are in place without having to implement the project with these basics every time.

• RoboHelp 2015 adapted HTML5: child projects are not displayed in the output of the main project

  Hello

  I have a main and right project currently linking to two projects of the child. I published the projects of the child to the correct file to location SSL of the master project. When the output of the master file, the table of contents of the master project are fine, but no information of the child projects. I searched the forums and other Web site for answers and have not been able to fix my problem.

  Thank you

  MDawn

  Chris

  I'm sorry, it took me so long to look at more in detail, but the good news is that the project you sent me now works correctly in Firefox and IE.

  The problem has been setup. You must build the parent to a folder that will then create the ready files for the child projects. Next, you generate each child in the child's file in the mergedProjects folder in the parent folder. You generated to the! SSL! each project folder.

  I would like to know if you want to send me the version of working with you.

  See www.grainge.org for RoboHelp and Authoring information

  

  @petergrainge

• With LR 3.4.1 my keywords are not saved to the file

  Since upgrading to LR 3.4.1 my keywords are more saved in files, so I can't see them in an external application. If I go back to LR 3.3 it works OK. Any ideas?

  I have the put option to automatically save changes to XMP.

  I tried to write metadata in the files manually, and that does not work either.

  The files are .jpg

  I use a PC under Windows 7 32 bit.

  Thank you...

  External drives often have special ACL on them which can cause problems for some applications to access. All it takes is for Lr change how it accesses files and file metadata (even a change that make it more "correct" - that is, a bug for another problem fix) and he can discover the problems of ACL.

  I don't know what you would have to do on Windows, but on a Mac, I would make sure that the drive is set up to be "shared" so there additional special ACLs on this subject that allow to take ownership.

  But, you want to start at the root of the drive, and reset the ACL (NOT only "permissions" which are older, simulated and incomplete parameters and making sure that recursion through the entire folder structures) as owner/creator and administrators have full control. There may be some other required special ACL if you want to share this album with different users on different computers. This part, I'm not familiar with, but it is often on Windows support sites. Quick eye or people with similar problems with remote disc for Windows services.

  Remember, if you have a login on two different machines to Windows (assuming you don't have some sort of connection to the network) it is technically two different users (even if they have the same name).

• "_Files" files are not copied to the output image

  It is a project RH10 WebHelp.

  I moved most of the HTM files in a new subfolder under "Project files" by dragging them into RoboHelp. Records of xxx_files containing the images have not been transferred, and instead, all HTM files were modified with ... / added to the src = entry. I then manually moved the files of the xxx_files in this place and updated each HTM to point to the location correct src .

  The end result is a partial success, the images show well in the editor of RoboHelp, but when compiling is generated, that xxx_files files are not copied. In fact we copied and I have no idea what's different on this one

  Does anyone know of a simple resolution for this that I have about 48 topics that don't work?

  Thank you very much.

  Solution:

  This information is cached in the .cpd file which is an access database file. The file can be changed manually or it can be removed and RoboHelp will recreate it with correct entries.

• Page tabs are not displayed on the page

  Hi all
  
  I created a page of tabs that have a link to a page. However, when I go to this page, the tab is not displayed. I notice that the shared-> component tabs of the page has nothing.
  
  Any idea? Thank you!
  
  Concerning
  Aaron

  Hello

  Will modify the properties of the page and find the display attributes
  http://download.Oracle.com/docs/CD/E17556_01/doc/user.40/e15517/bldr_pgs.htm#sthref614

  BR, Jari

• New Firefox Sync does not work correctly. Bookmark cannot be deleted. Tabs are not displayed on the desktop.

  I have two problems with the synchronization again. The first problem is that none of my bookmarks or tabs of my office are appearing on my Android phone or work phone reverse on the desktop.
  The second problem is I'm trying to synchronize my favorites of the beta version of Android FF for the non - Beta Android FF that worked well until I corrected to remove several bookmarks I have anymore. I want to remove them, but I can remove them only on the beta version and then when I go to the regular version none of the changes have been synchronized. If I try to remove them from the normal version nothing happens at all.

  One thing to check is the android device and new update of office are on the same synchronization. To check on Android is this (not recommended) Firefox Sync account

  The other thing to check is if the tabs and bookmarks synchronization options are on for both devices in the page manage account.

  Is this the case?

• Some Menu settings are not saved in the library

  I need help with some aspects of the recording menu in Encore CS5. At this point, I can create menus using still and Photo Shop. I set the Routing button (unchecked the selection automatically Route buttons on the properties > Standard tab). I set the Menu color scheme (by selecting the Menu by default in the drop-down color menu). As, in library, I created a new Menu Set, and I saved these new menus (as a template file and as a content auto model) it. I intend to use these menus in family films 38

  "Here's my problem: when I import these menus from the library again to the project, they appear with"Automatically of the road buttons"and with parameters ' set color:" automatic ". I have to set the button routing from scratch, and even if I change the automatic default Menu color settings, default Menu setting the value of the color is not what I put for these menus until I exported to the library.

  So far, my only solution is to create a "skeleton" with a main Menu and a submenu project and use it as a starting point to build each of the 38 films. The menus in this skeleton project - of course - keep their settings. (My problem with this method is that I already have 22 almost finished films where I just love to replace with these new menus and menus the way is not by the color of the Menu setting and re-routing every time, or begin to build the project again from scratch.)

  It could be something very simple to solve this problem - or not! . If there is, I would be very happy to hear.

  Thank you very much

  LACI

  :

  Post edited by: LaciG Sorry! I found an answer to one of my questions: I can save the color of the Menu setting to a file. However, I still don't know how to save the routing. Thanks for any help, as always...

  cannot do. look at the routing options in preferences to improve the auto routing.ve

• Could not open the film downloaded, Chrome tabs are not open and the computer does not turn off

  I downloaded a movie from torrent and tried to open it, but it did not open, and now I'm still not able to close the downloads tab in chrome page.google does not open also. more my pc isn't even close. Please resolve these issues. It's very urgent!

  Original title: pc problem. URGENT

  Malware can stop security to run programs.

  Have you tried to use these programs in Mode safe mode with networking that I advised you of? :

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  Also, follow this step:

  Once in Safe Mode with network, download and run RKill before the scan with these programs.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  See you soon.

• My Recycle Bin does not work. Deleted files are not stored in the Recycle Bin.

  My Recycle Bin does not work. Deleted files are not stored in the Recycle Bin.
  When I delete a file, none of these files are saved in the Recycle Bin.

  tried to restore desktop icons. no use.

  Tried to change the icons as method 2. Yet, my deleted files are not saved in the trash.

  My last bag of stuff.
  I assume that your allotted basket size is too small or you were not "empty" the collector for a LONG time.

  Right click on the Recycle Bin > properties > size under Custom, how many MBs are awarded?
  Mine is 1023 MB. I saw someone almost 5000 MB.

  Increase size, play with the numbers until the darn bac actually works the way it should be.
  Please post back. I'm curious to know the result.

  t-4-2

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.

• The changes are not saved - RV110W

  Greetings,

  I use RV110W with Firmware Version 1.2.7.1

  Under Firewall > basic settings >

  Block WAN request:

  Enable

  then try to change the selection, then > save changes (at the bottom of the page) are not saved.

  I also verify that different browsers (IE, Firefox, Chrome...), but without success

  any ideas?

  TNX

  Hello

  Thank you for your kind reply. Based on your post above, I can life your 1.1.0.9 for 1.2.1.7 update firmware.

  Please try to take backup of router and try to downgrade the firmware to 1.1.0.9 and check the status of configuration in this version. If it works fine please try to update the firmware version of the 1.1.0.9 > 1.2.0.10 > 1.2.1.4 > 1.2.1.7 and verify the configuration changed and made me know the status to go further.

  Thank you

  Ambareezh

• Note: The settings for this page are automatically saved in the Web browser cookies.

  I have a printer of C311a e-all-in-one HP Photosmart 7510.  When you look at the section of customizing built-in browser page printers, at the bottom of the installation of the list can be found this message:

  Note: The settings for this page are automatically saved in the Web browser cookies. If the Web browser cookies are deleted, these settings are lost.

  I would like to the file name for this cookie and can then ensure that this cookie is excluded from cleaning in the various tools that I could use for basic maintenance.  Thank you.

  I suspect that you gave me perfectly fine information.  However, given that this cookie file is not on my machine, determine why would come next.

  In fact, given the costs associated with this effort, profit generated over the lost time and possible third party website access to this particular cookie. all dictate that I have overcome this effort - for now.  I don't respect the time you have invested in answering my question, placing me in your debt in at least a couple of beers.  I want to thank you for the information provided.

  Mark

• When I edit a .wav file (noise reduction to remove the background hiss) and save them, the changes are not saved.

  I just installed hearing and have edited a few audio voiceover to remove the background hiss.  When I save the changes and reopen the file, the hiss is back.  The changes are not saved.  Why is this happening?  How to record the sound of the effects of reduction in my .wav file?

  [Ask in the correct forum allows... Left generic Cloud/Setup forum for forum specific program... MOD]

  shionak wrote:

  I capture the background hissing noise footprint > click apply > click on select, then click on apply again.

  These steps are not quite correct. You have two choices; either highlight a part of the background noise and use SHIFT + P, which captures your selection as a basis for NR or, open the Panel NR and use "Capture noise Print" from there, after making a selection first. After doing this, click on "select an entire file. What you definitely have to do is to use 'apply' at this point, and when use you it, just use it once.

  When you capture using printed, the Preview 'play' button inside the plugin to check the settings and then stop it. When you are satisfied of what he done, then click on 'Apply' - but once. This will apply for all of your noise reduction. As long as you do not use "undo" at any time, the version Number will be be recorded on the original, or if you use "save under", then the original will be left alone, and a new noise-reduced version will be saved.