With LR 3.4.1 my keywords are not saved to the file

Similar Questions

• Emails sent via Thunderbird are not saved on the e-mail server.

  I have a critical problem with the backup of the emails I sent to Thunderbird.

  The application works very well, that everyone sent mail is correctly saved in the folder "sent" located in the e-mail account of TB.
  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com), so whenever I have to reinstall the software, I lose all my outgoing emails. If I access my email on yahoo.com account and email from there, it is regularly saved in the sent folder there.

  I would be grateful if someone could
  (i) say me if it is a known problem, and if there is a way to remedy through Thunberdird server or Composition settings.
  (ii) if there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive. Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder? And I want to save the "Sent.msf" file as well?

  Thank you much for the help.
  L

  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com),.

  With a POP account, this is the expected behavior. Only the Inbox folder is visible on the server, all the other files are the.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_pop

  To access the other folders on the server, for example your sent folder, you need to configure your account as an IMAP account.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_imap

  so whenever I have to reinstall the software, I lose all my outgoing emails.

  You should not need to reinstall the software in the first place. And even if you do you will not lose any position, unless you deliberately remove your Thunderbird profile.
  With pop, all mail is local to your computer, including the "sent" folder.
  http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  If there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive.

  In fact, you must back up the entire profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring

  Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder?

  As said before, nothing is lost when reinstalling the application. If you want to move to a new computer by simply moving the profile.
  http://KB.mozillazine.org/Move_to_a_new_PC

  do I have to save the "Sent.msf" file as well?

  If you want to backup files individual mail, you don't need to save the *.msf files. They are just the index files and contain no mail. They are rebuild automatically when you start Thunderbird.
  In any case, to save the entire profile is the recommended method.

• Deleted emails are not going in the file 'delete '.

  I have Windows 98 and you use Outlook Express for e-mail.  In the last days, I find that when 'remove' email, thinking it will in the file 'delete' - he's not here.  Only those e-mails I delete without opening (spam or readings) go to the file to delete.  Where are the others, and how can we fix this problem?

  First: discover | Current view. Make sure Show all Messages is enabled.

   

  Remembering that Win98 has not been supported over the years, you may just have a little corruption of dbx file.

   

  Move the messages you want to record off deleted items and sent items. Locate the OE message store and then close OE.

   

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

   

  With OE closed, find the Deleted Items.dbx and Sent Items.dbx files and delete them. New files will be created automatically when you open OE.

   

  Compact all folders as described below.

   

   

   

  After you're done, followed by compacting your folders manually while working * off * and do it often.

   

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

   

   

• How to uninstall programs that are not listed in the file of control panels?

  I want to uninstall windows defender and norton, so I can install another security system and they are not in the control panels uninstall file.

  You cannot uninstall Defender; It is a part of the Vista operating system.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Enable or disable the Windows Defender

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  For Norton, download and run the above Norton removal tool.

  See you soon. Mick Murphy - Microsoft partner

• Some Menu settings are not saved in the library

  I need help with some aspects of the recording menu in Encore CS5. At this point, I can create menus using still and Photo Shop. I set the Routing button (unchecked the selection automatically Route buttons on the properties > Standard tab). I set the Menu color scheme (by selecting the Menu by default in the drop-down color menu). As, in library, I created a new Menu Set, and I saved these new menus (as a template file and as a content auto model) it. I intend to use these menus in family films 38

  "Here's my problem: when I import these menus from the library again to the project, they appear with"Automatically of the road buttons"and with parameters ' set color:" automatic ". I have to set the button routing from scratch, and even if I change the automatic default Menu color settings, default Menu setting the value of the color is not what I put for these menus until I exported to the library.

  So far, my only solution is to create a "skeleton" with a main Menu and a submenu project and use it as a starting point to build each of the 38 films. The menus in this skeleton project - of course - keep their settings. (My problem with this method is that I already have 22 almost finished films where I just love to replace with these new menus and menus the way is not by the color of the Menu setting and re-routing every time, or begin to build the project again from scratch.)

  It could be something very simple to solve this problem - or not! . If there is, I would be very happy to hear.

  Thank you very much

  LACI

  :

  Post edited by: LaciG Sorry! I found an answer to one of my questions: I can save the color of the Menu setting to a file. However, I still don't know how to save the routing. Thanks for any help, as always...

  cannot do. look at the routing options in preferences to improve the auto routing.ve

• Tabs are not saved to the output

  I upgraded to Firefox 4, and now he wants me to save tabs on exit. According to the Firefox help I renamed formhistory.sqlite formhistory.sqlite.bak and sessionstore.js to sessionstore.js.bak, but that did not help.

  Firefox stores now always the old session, and you can access it by going to the history menu and selecting "restore previous Session."

  If you want Firefox to display the message to save the session, it can be turned on again by changing some preferences.

  1. Type of topic: config in the address bar and press on enter
  2. Accept the warning message that appears, you will be taken to a list of preferences
  3. Find browser.tabs.warnOnClosepreference, if its value is set to false, double-click on it to change its value to true
  4. Repeat this for 3 preferences browser.warnOnQuit, the browser.warnOnRestart and the browser.showQuitWarning

  If you always open the last set of tabs, another approach is the following:

  1. Click on the orange button Firefox, then select options to open the options window
  2. Go to the general Panel
  3. Change the setting "When Firefox starts" to "show my windows and tabs from last time '.

• Toshiba 32L4363DG - videos are not played to the end

  Hello
  I have several problems with my TV

  1. long movies are not played to the end. For example 2 h 10 min film only 1 h 50 min appears when played from USB. Ultimately TV comes out just the movie to the file manager. This happens with all feature films and is extremely annoying.

  2. some videos to youtube since the Youtube app are not played to the end as well. The courts also - 30 min video gets reduced to 25 minutes. I think that it is discussed here: https://forum.toshiba.eu/showthread.php?78985.
  Still no solution!

  3. after the latest software updated is a very irritating problem. I set up the channels with antenna scanning. All the strings appear and get stored - turn on/off tv and remain the channels. BUT after I enter the menu (press the Home button) of the Smart TV all channels disappear! I have to rescan them again! Never happened before the last update!

  Thank you

  Hello

  1. long movies are not played to the end. For example 2 h 10 min film only 1 h 50 min appears when played from USB. Ultimately TV comes out just the movie to the file manager. This happens with all feature films and is extremely annoying.

  This seems to happen reading long memory flash USB mp4 files
  This topic has already been discussed in this thread:
  https://Forum.Toshiba.EU/showthread.php?70162

  3. after the latest software updated is a very irritating problem. I set up the channels with antenna scanning. All the strings appear and get stored - turn on/off tv and remain the channels. BUT after I enter the menu (press the Home button) of the Smart TV all channels disappear! I have to rescan them again! Never happened before the last update!

  Not sure if this might help but try resetting the default TV (load defaults) after the firmware has been flashed.
  Then rescan the channels again.

• My Recycle Bin does not work. Deleted files are not stored in the Recycle Bin.

  My Recycle Bin does not work. Deleted files are not stored in the Recycle Bin.
  When I delete a file, none of these files are saved in the Recycle Bin.

  tried to restore desktop icons. no use.

  Tried to change the icons as method 2. Yet, my deleted files are not saved in the trash.

  My last bag of stuff.
  I assume that your allotted basket size is too small or you were not "empty" the collector for a LONG time.

  Right click on the Recycle Bin > properties > size under Custom, how many MBs are awarded?
  Mine is 1023 MB. I saw someone almost 5000 MB.

  Increase size, play with the numbers until the darn bac actually works the way it should be.
  Please post back. I'm curious to know the result.

  t-4-2

• I get emails with pictures and when I send them to others. they open them but the images are not displayed. The photos are there when I send them. Thank you

  I get emails with pictures and when I send them to others. they open
  their place but the images are not displayed. The photos are there when I send a
  them. Thank you

  Make sure that your security software (antivirus) is not blocking attachments.

• IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  Sorry, but if your device is disabled and you have no backup, then you won't be able to save the data on the device:

  https://support.Apple.com/en-us/HT204306

  You should back up your device regularly to iCloud or import your photos to an application on your computer. Otherwise, you will be risking losing those photos. If your device has been lost, stolen, or crushed by your car, you'd be in the same situation. Really sorry for your photos.

  Good luck

  GB

• You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable.

  Unplugged network cable?

  Recently I get this message then on the line. You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable. It is very aggravating. Can someone tell me how to solve this problem? It might have something to do with my firewall? I recently downloaded mozzilla firefox if I could play words with friends, because IE would not work on the game.

  Hi LouisteanGriffin,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• Error: "Setup cannot continue because you are not connected to the internet or the server is unavailable" with install LifeCam

  Original title: Microsoft LifeCam VX-3000 installation problems

  On the insertion of the CD, I get an error message that says:

  "Setup cannot continue because you are not connected to the internet or the server is unavailable.  Connect you to the internet and run the SETUP again.  During the installation process, accept all safety messages or a firewall. »

  I am connected to the internet and have tried the setup.exe and allowing the CD auto load with the same error several times running.    (Windows xp / laptop Toshiba - all system bus met...)     Thanks for any help!

  Hi kb11a,

  The Knowledge Base article has many resolutions for this issue. Follow the steps. I hope that one of them will fix the problem of the installation.

  Resolve the error "Setup cannot continue" when you install the LifeCam software
  http://support.Microsoft.com/kb/973297

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two in

  Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two inaccurate statements. I GET NOTHING BUT NOTHING ADOBE 'SUPPORT '.  How can I get just the program open and running?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

  I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

  Hi Bobsirkus,

  The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

  Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

  You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

  Kind regards

  Tanuj

• Hello, I downloaded a new Web site, but all the svg files are not displayed on the browsers. When I opened it in Muse with the "Preview in browser", its fine! can someone tell me please where is my problem? (Sorry for my English!)

  Hello, I downloaded a new Web site, but all the svg files are not displayed on the browsers. When I opened it in Muse with the "Preview in browser", its fine! can someone tell me please where is my problem? (Sorry for my English!)

  Hello

  Could you please check this thread, it might be useful

  Muse exporting is not svg, can only see Preview