Take a quiz

Similar Questions

• How to allow the user return to give lectures when they take a quiz?

  Hello world
  
  I'm new to Captivate and now I'm kinda in a dilemma. Thank you for your
  time to look at my post!
  
  I created a CBL in Captivate 3, the first 10 slides is a conference and he
  is followed by a quiz of 10 slides, defined as standard SCORM.
  
  I want that the learner must be able to refer to the Conference when they
  Take the quiz, I tried 2 approaches and they both
  issues in different ways.
  
  Approach 1: "allow moving backwards" and "infinite attempts. The
  problem with this approach is when the learner clicks on "review the.
  quiz"and when they click"back"on the first slide of questionnaire, all
  Quiz will start everywhere, the score is reset to zero.
  Because the quiz is seeing this as a new attempt and that the learner is
  permit to make "infinite attempts" such that it has been configured.
  
  Approach 2: "Allow moving backwards" and leave only "1 attempt.
  The problem with this approach is, when the learner is in the Middle
  Quiz and refers to the Conference, the quiz will be
  automatically shown as completed. And the learner will not get a
  chance to answer these questions unanswered.
  
  It seems that every time that I leave the learner refer to the Conference
  in the middle of a quiz, the quiz will be seen as completed. Who am
  I did wrong? Is there a better approach I can "allow backward
  movement' and always allow resumes user their quiz where they have left
  in the distance?
  
  Sorry for the long post, I was not able to express it in a more
  concisely.
  
  Any help is really appreciated!
  
  -David

  What you see is the behavior designed as in Captivate for the quiz.

  Each Captivate movie has a range of "quiz", which starts with the first measurable purpose and ends at the Quiz results slide.  If you enter the scope of quiz by starting a slide of questionnaire, then jump back away from quiz, to return to the basics, default behavior of Captivate is to freeze the quiz at this time here.  Then when Captivate refers to allow movement to the rear, it is talking only a move backward in the quiz.

  For example, if you get to question 1, but no answer and proceed to question 2 answer that we can go back to question 1, you will still be able to answer question 1.  The test will not be frozen.  However, if you had jumped to any slide before question 1, your quiz would have been frozen with everything that you mark had accumulated at this time here.

  There may be a workaround that you can use to get closer to what you want.  As any object that is classified as part of the quiz, you can add a button on one of the first slides that the user must click to move forward.  Set the properties of this button (or click on the box) to report a score for the quiz.  What makes a part of the scope of quiz.  Now, any content slides falling after this slide button are also within easy reach of quiz and return to them will not have the same effect of freezing the quiz.

  Please keep in mind another aspect of the quiz questions: If you answer a quiz question, and then move off the slide (forward or back) quiz question answer is frozen and cannot be modified unless resume you the Quiz or raise all of the module.

  Hope this helps to clear up how things work.

• Take the Quiz

  I have a project that has a quiz 5 question classified at the end with all the multiple choice questions. If a user does not pass the test, they are transmitted at the beginning of the quiz for a recovery until they pass. In CP4, if the user has failed and was sent at the beginning of the quiz, the quiz seems to be already taken and filled with answers. This was not the case with CP3... it has been reset and ready to be recovered. Is there a way to 'reset' a quiz for a resumption without having to refresh the entire browser to reload the project? Maybe there's another way to go about this?
  
  TIA,

  I have seen this issue before. You MUST go forward after a quiz is done. You can not jump back in case of failure. The solution to go forward to a temporary slide AFTER the quiz. Then add a message and continue a button that jumps at the beginning. If they pass, use GOTO, then a jump to the slide AFTER slide Quiz fail.

  Here's the order:
  Slide 1
  Slide 2
  Quiz series - failure Slide, pass go to END
  Slide fail
  End

  Parameters
  Allow 50 attempts
  The user MUST take quiz to continue

  SCORM requires a movement forward to score. I had a conversation pleasant email on this subject with the developers.

  There is a documented bug I have just covered (today) with the developers where the software will only take two jumps. Imagine a quiz, slides, a quiz, slides, slides, a quiz, END. In the Middle, it will not reset. they have my comp this for CP4.

  I hope this helps a little.

  Joe C.

• take the quiz to return only quiz questions

  Hello

  My routes has quiz between teaching slides. There is a pass mark in order to pass the minimum course. When the user fails, they go to the slide of result with recovery test button. But they must examine all the slides after the first slide instead of question slides and quiz. How can I solve this problem? I use captivate 7.

  Thank you.

  You will need some advanced actions (or shared). There is a variable system cpQuizInfoAttempts that is incremented when the recovery is click on the button, with the first slide in the question. The first time, it is set to 1. When it is greater than 1, the user is in recovery mode. At this time there the content slides should be ignored. Create a conditional action like this:

  IF cpQuizInfoAttempts is greater than 1

  Jump to slide X

  ON THE OTHER

  Continue

  If turn you this into a shared action, "slip X" will become a parameter.

  You need to trigger this action shared with the event on enter the slide content, immediately after a slide of questionnaire (or a series of quiz slide). The parameter 'slide X' must be the slide with the question and should be modified based on which slide you have to jump from.

• How can I allow the user to take a quiz in the middle of it in Captivate 7?

  Hello Captivaters,

  I want to the learner of a test until he could continue on the training of the force.  If it does not pass the test, he will have to go back and resume. "Recovery" button allows him to do this, but I really want to have 4-5 of these checkpoints 'quiz' in e-Learning - separated with presentation material - so the user proves that he understands the material before moving forward.

  This is why I would create my own button "recovery" at the end of every "checkpoint quiz" that leads the learner to the first issue of this checkpoint (not to the first issue of training).  So far, I was able to create a button that appears after it receives a correct quantity to allow him to continue, and I want to create a button that appears and brings it to the first control point question if is nott get the correct amount and return to these questions.  The first part is easy, but I also need to add the function or reassign a variable to allow the user to resume the quiz. I hope I'm making sense... Any help would be appreciated!

  -Ryan

  Your recovery button (s) will have an advanced standard action at least these two statements and in the following order:

  • Go to slide to score
  • Go to the question slide

  Jumping to the slide of score and so that there are attempts to Quiz on the left, the next attempt will be launched (you can check if you put the system variable I was talking in a text container timed for the rest of the project). Then you jump to the slide where you want the user to return to the questions.

  You may have to make it a conditional action advanced, if you want to first test the result?

  Lieve

• Send e-mail when someone takes the quiz

  I have my quiz put in place so that the results are displayed in my internal server so I can use quiz monitor to access the results. Is there any way I can receive an e-mail when someone passes the test so I can't check the Analyzer quiz to see who did the test?

  Captivate allows you to trigger an email via advanced Actions.  However, this best open a new email in the email client of the user with some default of the text of the object and your e-mail address.  You are still reliant on the user manually send this e-mail.  This makes it unreliable itself.

  To get an automated e-mail, you must have access to the web programming skills to create a page server who sent an e-mail when it is called.  The Captivate course participant would then no conscience of enamel.

• Captivate 8: how to display the button of re - take Quiz?

  In older versions of Captivate, there was an option to make the Quiz to resume the button appears. But I can not find in Captivate 8. Where is he?

  Hi Capybara55,

  You can find the functionality of quiz recovery in Quiz preferences > Pass or fail tab > Section "is a rank failure:

  

  In the case where if you allow the user to more then 2 attempts then box re - take a quiz button will turn on and then you can check the box for the features of re quiz - take in your presentation.

  Thanks and greetings

  Amir

• Captivate 7 - Quiz questions take a long time to advance to the next

  So I have completed my course. All along (each slides or so) I quiz questions that are classified but undeclared. They are simply there to prepare the student for the final exam. They have the opportunity to submit the response followed legends correct and incorrect. At the end of the course, the trainee meeting these same issues (55 in total), but now they are back to back and they are both classified and reported. Here, they have only the option to submit.

  When they take undeclared quiz questions, click on submit and it quickly goes to the next slide, because it is set up to do. BUT on issues that are noticed and reported, when they click on submit, it really takes a lot of time to move to the next slide (and a lot of time, I mean 10 more seconds). At the end of the review, when they answered the final question, and click to go on, the two final slides take more time (sometimes up to a minute) to move forward.

  I understand it is going to be some delay while the system reports the score for each slide, but this seems abnormally long. This shift occurs in preview mode, scormcloud and during a test on a LMS (Gyrus) client.

  Any idea on why this is and how to prevent it. It's really hard to ask my customers to be patient and stay there for 10 seconds every single issue. I need them to take the final exam at their own pace - fast or slow.

  Thanks in advance,

  Arthur

  I know, it is barely visible, because the line between the inactive and the Active part is black on a blue background (already invited for 6 or 5.5 to change that color...) You will need to go over it all in the middle of the timeline until you see the line double cursor appearing and you can put:

  

  Go to the next slide makes them faster. I had no problem with our LMS, but read on this forum (you know that I am often here) that some have done so. No rule of the world, by dragging the break more towards the end has almost the same effect, but you can leave a little bit more time (less than the 1.5secs).

  As I know there is no way to change the sleep time by default for Question slides, as the timing is never available on Quiz Master slides.

• Random Quiz questions repeating on the occasions of Captivate

  Captivate 9 using a Mac

  I have a 10 question quiz

  5 questions are mandatory

  5 questions are random 10

  Created 10 question pools. 5 with one mandatory question and 5 with two random questions

  Users must take the quiz at the end, there was $$username$ $ you reached $$cpQuizInfoPointsscored$ $

  AND advanced Action Pass = see shut up and leave (hide another) and does not = button resume show and hide on the other.

  The problem is when taking the quiz (NOT restart) the quiz presents the same issues. I guess it's because the random questions are selected during the loading of the project (is html)

  Questions ARE random during closure and relaunch the project

  How can we get the random recovery?

  I can only think to create another set of grouped questions and apply IF recovery quiz SHOW 2nd pool...

  but it is an assumption and prefer not too many break points

  thoughts...

  I'm sorry but that's how the random questions are indeed fixed, once they are selected from the pool. Recovery would never use new random questions.

• Quiz the button continue, not to jump to the slide properly

  Hi again,

  I have another problem.

  I work in

  On a Mac

  

  I have done this in other projects and not had a problem like what I find now. I also cross referenced to make sure all my settings are the same.

  I have a quiz in my project and after the slides, I have two slides more. One with a message for the passage and the other for the failure. After the student take the quiz and passes or fails them, they then click on the "Continue" button and proceed to their respective slides.

  The problem I have is that after clicking on the "Continue" button with a score of default, slide play a bit and then stops. It will not advance to the next slide, and it will not go back. I guess it could be described as the freezing point. If I close and then again with a pass mark, the "Continue" button will change to the correct slide with no break. If I spend two autour slides in the film the button display 'Continue' does not to either.

  Is anyway to fix this? Here is a screenshot of my pass/fail options in Quiz preferences

  

  I read somewhere that it might be the result of a corruption on this slide. Anyway is to remove the automatic slide in the Quiz results and make a new one?

  Thank you 1 million,

  Kellie

  You can change the desired option back to optional? There are other ways to force the user to take questions, but you ask Pass! This may be the reason for the questions.

  D & D will not cause as far as I KNOW.

• Problem with Multiple Choice Quiz

  I tried several times to insert a multiple choice quiz success in my slides. The problem is that when I try to take the quiz (for a preview), I have to click several times and wait several boxes pop up coming (correct, click anywhere; incorrect, etc.). All these boxes pop up show before he let me go to the next slide. Anyone know what I need to change?

  Are you found using the preview feature in presenter or switch to slide show view (F5) in PPT? Looks like you're watching just PPT presentation, who must play through all the animations on the slide.

  You see the same questions if you publish the presentation on site and view the published version?

• How can I me button recovery to be displayed even if the user passes the quiz

  Hello

  My quiz in the end will be just practical.  I want the user to be able to take the quiz as many times as he wants, even if he spends with 100%.  Is this possible?

  Thanks for any help.

  Ryan

  Unfortunately, Captivate considers a successful attempt of the quiz at the end of the questionnaire and once State success is reached then the possibility to RESUME the QUIZ ceases to be available.  Your username should relaunch the lesson to try the quiz again.

• Audio can be spread through quiz?

  I would like to play background music, even if a person takes a quiz.  I want background music to play seamlessly, while the person goes through the three questions.  Is this possible?

  Thank you

  Marty

  An audio file can not be put in presenter to play regardless of the slides (which means having a single audio file to use on a group of slides until the movements of the user beyond these slides). This can be done in Captivate, as I said earlier.

  You can either assign a portion of the audio to each slide (there may be markers of click animation you have to move as well for the slide of the questionnaire) or you can assign audio to multiple slides if the tool import or by using the copy and paste function, according to Rajeev.

• Help! Lesson with 2 branches of locking on the Quiz results screen when the learner (branch or another) fails.

  I have a lesson CP6, which is essentially two parallel branches, with only the following slides in common:

  • A slide 'welcome. '
  • A slide where the learner chooses its branch
  • A "Congratulations!"  "Slide you completed the test.
  • A slide "you not answered the questions correctly.

  Once the learner chooses its branch, it is given a 5 question test.   If he fails the exam, he is taken to a short lesson, specific to the content tested in this branch.   When he finished the lesson, he is returned to the test to try again.  If it fails, come back to the lesson, then back to the review, etc.  until it passes.  (I put max '10' under 'Préférences Quiz' tent)   When he passes, he is taken to the "Congratulations" slide and the end of the lesson.

  I put the last question in each branch to go to slide Quiz results (success or failure), and I put the Quiz preferences to access the slide of "Congratulations" so passing and for the "you not answered the questions correctly" drag if the learner does not.

  That's how it is supposed to work anyway.  And that's how it worked until I made a change somewhere and he mucked things.

  What happens is instead:

  • Testing (both branches) learner outcomes Quiz and 'Congratulations' slide takes very well.
  • Lack of test (or another branch) brings the learner to Quiz results and then gets stuck there.    (In fact, if I click on the "Continue" button a second time on the QR slide, the lesson does not always advance but disappear all the graphics, that I put on this slide, which is weird and not at all useful.)

  Branching seems ok for me.   What Miss me?

  

  I know I have to improve and we will be soon, but not before this lesson must be published - which is, of course, yesterday.

  Help?  Anyone?

  Figured it out.  A "required" on the page "Quiz: settings" value "necessary Pass - the user must pass the quiz to continue."  Who kept the learner continued beyond the "results of the Quiz" slide and a loop to the didactic content and taking the quiz.

  I changed "Required" "Required – the user must take the quiz to continue."   The learner is able to loop back/reading/retest as many times as necessary in order to pass the test.  All right.

• Users can bypass quiz necessary if it's drag-and - drop

  Captivate 8.01 on a Mac.

  I have the quiz in the updated project "necessary - the user must take the quiz to continue." It works on all other quizzes except issues drag / move.  As the quiz properties are different for d & d, I wonder if I am missing a setting or if it is a bug.

  & Sliding is not a question by default slide, although it has some of its features like interactive objects and interactions of interactive training. This isn't a bug, there are more differences with the normal question slides: when coming back to a D & D it is automatically reset. It is not included in a recovery or a revision. The score can be included in the bill total to a file, as well as the score of buttons, click boxes, form buttons, text entry areas and interactive interactions can be included in this partition. But this isn't a normal question slide.

  Drag & Drop - Captivate blog tips