Take ages to defragment?

Similar Questions

• My iPhone 4 takes ages to load the battery is swelling and burst on the back of the phone

  My iPhone 4 takes ages to load the battery is swelling and burst on the back of the phone

  First of all, stop plugging him. Then, make an appointment at the Genius Bar at your local Apple Retail Store or contact Apple to arrange for your sent phone service.

• I was downloading a file of 15 GB creative cloud, it takes ages, so I decided to send it by mail. How can I stop the sincere now?

  I was downloading a file of 15 GB creative cloud, it takes ages, so I decided to send it by mail.

  The FAQ is at http://helpx.adobe.com/creative-cloud/kb/creative-cloud-connection-faq.html#id_74925

  Is there a file size limit?

  With preview Creative Cloud connection, you can upload files up to 5 GB. If you try to download anything more, you can see some unexpected errors.

  With creative cloud site, you can upload files up to 1 GB. If you try to download anything more, you can see a few unexpected download failures.

  ^ Ani

• How long does take to install the creative Cloud Desktop application? It seems to take ages?

  How long does take to install the creative Cloud Desktop application? It seems to take ages?

  Make sure that you have enabled cookies and clear your cache.  If he continues to not try to use a different browser.

• it take ages to download and install flash player

  I realize that for some time, it will take ages to download and install adobe flash player! is there a problem with the server, I just can't install it I use windows 7 and windows 8 in both I have download it but wen trying to install, it starts to install and it is said that it takes time to download and stop instalation what I can do to install flash player? Thank you very much

  Try the offline installation program of http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player-Windows.html #main - pars_header

• My mouse keeps freezing on me and it can take ages before it starts working again

  I tried defraging, compressing files, to change mouse (makes no difference), I have a lot of memorary. I am at a loss as to what is the cause.

  Hi JeanetteAldridge,

  ·         What is the brand and model of the mouse?

  ·         Did you do changes on the computer before the show?

  ·         The problem occurs with all applications?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Update the latest drivers/software for the keyboard.

  Method 3: Try the keyboard in another computer and check if the problem persists.

  For reference:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

• After the update to Firefox 6 (and 7 now), I find that some Web sites take ages to load. This problem does not occur with IE. Any suggestions?

  Since the update to Firefox 6 I found that some Web sites a change upward to 5 minutes to load. The same websites load quickly on IE. I had hoped that Firefox 7 should solve this problem, but it happened. If there is no solution, I'll probably have to stop using Firefox.

  Why this link does not go to the IANA, rather than this site?

  Many people have found that setting the maximum number of connections to: config for a lower number has solved the problem of slow Firefox.

  Network.http.Max - connections - default value is now trying to 256 - 48

• When you open an attachment in windows mail it seems to take ages to open sometimes up to 5 minutes.

  can you help me

  Hello

  
  1. What is the format of the attachment?
  2. which browser is installed on the computer?
  3. what anti-virus is installed on the computer?
  
  Method 1: Temporarily disable anti-virus and see if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
   
  Method 2: Perform the clean boot and see if the problem resolves.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

  http://support.Microsoft.com/kb/929135

  
  Hope this information helps.

• Windows 7 takes ages to startup

  My complete PC configurtion is as follows:

  • Processor: Intel dual core 2.7 GHz
  • RAM: 1 GB
  • HARD DRIVE: 320 GB

  My PC, Windows 7 put in place since then taken 10 minutes to start, but in my friends PC it tkes only 5 seconds. His computer is a much older Intel Pentium 4 processor. Could someone let me know what the problem with my PC?

  OMG it was a problem with my DVD player. When I used my friends DVD drive it worked.

  Thks for the solution anyway.

• InDesign takes ages to open, no start page

  For a few weeks (approx. February 10, 2016) InDesign CC 2015 opened very slowly, say ten minutes and I don't see any page starting at all, I have reinstalled several times also the re-installed the installer of the cloud as well.

  Are you sure this isn't a question of memory because my Mac machine is quite up-to-date, Illustrator is also slower to open, but not so bad. Anyone had the same problems? any ideas?

  see you soon

  Pete

  Thanks Steve

  It worked

• TDMS Defrag progress switch Question

  Starting in 2015 from LabVIEW (I think), there is a bundled with LabVIEW example that shows how to defragment a PDM file and get the status of the defragmentation process.  This example uses two screws again, one to enable and disable the indicator telling the defragmentation to provide status and other VI to actually get the progress.

  My current design is through an actor architecture where each test site will be a reentrant VI manages journaling of the criterion on this location.  And I wanted to get this actor of logging check to see if the file is fragmented and defragment it periodically.  I join defragment at the end of the trial.  I thought I had a this defragmentation progress would be a great feature, but with these two screws being undocumented, I don't know how they will work when there are parallel processes potentially also defrags on other files.

  My question is in what regards progress switch turning off.  For progress should be submitted, you must turn on the switch, then you can read the current status and in the example, it shows the turning off of the switch.  But if I'm defragmentation with a progress bar in a parallel process, turn off the switch it disables all files and this isn't what I want.  What impact could I see so if I leave the switch of defragmentation on throughout the life of the application?  A small example of what I'm hearing is attached.  It generates two files, one who takes one longer defrag than the other, but they both start at the same time.  If I turn off the switch when the first stops, then progress will be not indicated for the second file.  I'm okay leaving activated forever?  Or do I need to track which files are to be defragmented and turn off the switch when they are all done?

  Either way, the lack of documentation on these features exist in 2016.

  As you have found that if you turn off the switch of progress, may not be all the defrags for different files. Leaving eanbled forever is good, but can do a little slower for the case of not having to view the progress of the defragmentation.

  Jie

  OR R & D

• Why youtube videos do not take a lot of time to load

  YOU TUBE QUESTION

  Please explain why some clips (on You Tube) that run a few minutes long can take ages (10-15 minutes) to load while others as long are ready for display in a minute or two.  My laptop speed is up to 54 Mbps and the intensity of the signal very good to excellent.

  Thank you very much.
  Joe

  Three possibilities, I see...

  (1) your internet connection speed can be much slower
  as you thought. Have you checked the connection speed
  at the dax1792 site posted online?

  (2) you can be located a long way from the server.

  (3) there may be a very high on the site or the net traffic
  congestion at the peak hours of the day.

  As for the different load from one clip to another time...
  I can only guess what would be the difference in the way in which the
  video has been encoded. Some are of much better quality than
  others.

  FWIW... my connection speed average somewhere around
  20 Mbps and YouTube video clips play instantly for me.

  Download the clips to your hard disk and viewing
  There may be a solution.

  See you soon.

• Age of dell1525 taken in charge and most programs are either crashing or can not connect

  Windows vista on my dell1525 always seem to take ages to load up and internet searches are more frequently either crashing or does not connect after the initial connection - also tape the letters seem to jump out of place. It's now my computer is too slow?

  Hello

  You did changes to the computer before the show?

  Method 1

  Step 1: I suggest to start in safe mode with network and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Note: select Safe mode with network.

  Step 2: If the question does not persist in SafeMode with network, then put the computer to boot and check what third-party application's driver is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Disk defrag works not, taskmanager no opening, very slow downing load anything

  I've had problems with my computer for a while now and I don't know what else to do now, I'm trying this.  I sent this computer in Bridge 2 times now and this looks at what could be the third if I can't get all the answers.  The problems I have been having always start when I first try to defrag my computer.  It takes forever to defragment. I started it at 09:00 and it was not yet done at 20:00. I finally stopped him at 21:00 and it just sitting there like it was stuck.  now my task manager does not open and I can't get this thing to download something, including the microsoft fixit tools.  I am very frustrated.  I downloaded all execept serivce Pack 2 updates and this thing is everything to date.  any help would be great.

  Installation of the Service Pack 2 - that is where I would start. You say that you have downloaded all the updatesexcept this one, so with that one being later, it should correct a little (apart from a virus, etc.). An application that will help you realize what lack us isBelarc Advisor . I love it, because it produces a file html (on your own computer), and once it loads in your browser, you can print it out and have a list of all installed on your computer - and it includes what Microsoft Updates are installed and missing, with the version numbers for all of this. And it's free. :-)

  I'll make sure that Windows Defender runs, as a bare minimum (I thought Windows Security Essentials, being in agreement, but I uninstalled it because it made my Vista boot slowly and returned to the Defender). Vista is quite safe, however. If you buy a commercial product, I recommend Kaspersky (I don't use it myself, because I download a lot and I'm careful, but my mother has it on his computer and she's in all Big Fish Games and so on and got a nasty on her own a bit... virus) Until Kasperky was installed and took care of that - now it catches everything (so far)).

  Virus and others can make Windows run slowly. I've seen all kinds - some file after file replication, increasing the number and size of the files, the names of some really stealth and switching. But if it is not a virus that slows down your computer, it is really likely to be fragmented files. In this case, I would recommend Auslogics Disk Defrag . It's free and FAST.  You can defragment with a new and also OPTIMIZE files so that things run faster. Any defragger will take more time with the bigger hard drives. Windows Defrag takes too long. So doesn't the defragmenter in Advanced SystemCare 3(so uncheck the Defragmenter option if you run this, BUT I recommend highly this program because it will clean a lot of things for the better - remember do not check the boxes in the window popup resulting for the module of security... unless you know what you're doing , because not all these (Browser Helper Objects, etc.) are a problem. This program also includes a fixer shortcut, an application that allows you to see what programs are running at startup and much more. One of the best I've seen, and I used it for a few years now without a problem.

  These last two linked above will go a long way toward acceleration and optimization of your system. I run these two first and then restart. SystemCare has three main sections of things that can be run - she is really well organized. It "takes the trash", in other words. :-) It will get rid of unwanted files and increase the speed and solve common registry problems (something I was initially uncertain about when I got it, but after a few years, it was no concern - it cleans things upwards, and unlike other programs of registry).

  Another possibility: according to how you have set aside for virtual memory, if you get close to maxing out your hard disk space, you might find yourself in a situation where the computer is both need to write a lot on the drive and need more space, or space dedicated to virtual memory (I call it "the garbage area" where she must write and write about things older in this area) (as things are processed - this is temporary memory). Bottom line: If you are short on space and don't know what to do about virtual memory (and people use virtual memory to compensate for the fact that they do not have a lot of RAM |) Memory to play with), then let the system choose automatically the drive. To set it, you go to computer (aka My), right click and select Properties, and then when the system properties, click Advanced, then settings of Performance, then advanced once, then, virtual memory, select change. You can select automatic for ALL your drives, OR that the management system of the size for the selected drive. All readers do not have to have it, but whatever you select whether by car, it will create this sandbox of virtual memory paging on the same drive. Editing plan that will be used by the system to write things. Check the recommended size it compared to what is currently assigned. To play it safe, go with the recommended or let the system handle. Virtual memory can increase the speed and performance.

  I hope that these things help with some of your speed issues.

  (Note: the not not opening Task Manager, tells me that it might be a virus on your system, in which case you could look in these free programs:EMCO Maleware Destroyer andEmsisoft Anti-Malware (formerly A2 Squared) (full analysis is thorough and takes some time, but there is a quick analysis).) Lavasoft Adware, SpwareBlaster, Spybot Search & Destroy are also good.

• Why Vista takes up to 2 minutes and / or several attempts to close?

  In the last 2 months Vista seems to take ages to close - sleep is OK but other functions of slowly closing up to 2mn or / and after several attmepts.

  Have Vista Home Basic

  Appreciate your help.

  Shutdown problems are usually caused by a program or process that won't come out gracefully. The program or process may be against malware, or may be legitimate (for example a pervasive like Norton or McAfee antivirus). If you use Norton or McAfee product, uninstall it and replace it with a better program like NOD32, Kasperksy or Avast (free). The Windows Firewall is enough for most people. Shutdown problems can also be caused by old/badly written drivers so make sure that all drivers are updated, especially on Windows Vista and Windows 7.

  A.the first step should always ensure that your computer is free of viruses/malware.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  B. If the computer is free of viruses/malware, the drivers are current, and no program Norton or McAfee is installed, then do boot minimum troubleshooting to see what program/process is the culprit:

  How to perform a clean boot in Vista and XP - http://support.microsoft.com/kb/331796
  How to perform a clean boot in Windows Vista or Windows 7 - http://support.microsoft.com/kb/929135

  C. Si you need more information, here's a troubleshooting utility excellent stop - http://www.aumha.org/win5/a/shtdwnxp.htm

  Standard caveat: If the problem is too difficult - and there is absolutely no shame in admitting it isn't your cup of tea - take the machine to a computer repair shop. This will not be your type of BigComputerStore/GeekSquad space of the place. Get recommendations from family, friends and colleagues.
  MS - MVP - Elephant Boy computers - don't panic!