Taken username error

Similar Questions

• Password and username error message undefined VIX

  Hi, I installed VIX on orchestrator. For some reason, when I try to run the workflow as - create a temporary file in the comments OR check the comments file

  I get the following error message

  Process validation of reports 2 errors in the workflow. Disable the control validation in the preferences or correct errors.

  Looking further, I see the follwing erro message "configuration of 'defaultvCenterUSername' attribute not set and Aiiribute ' defaultvCEnterPAssword not defined configuration."  I think it has to do with the username and password of vix, but don't know where to put this in place.
  Thanks for your help!

  It's Configurations, not the flow of work in a tab.

  Christophe.

• username error

  I just bought a Centro and try syncing GroupWise via GW PDA Connect 7.0.  I am able to run the two HoySync & PDA Connect but when I hit the sync button it asks me to create a user profile.  After I entered the correct username for my phone and my password, the software "thinks" and expires.  The username does not record.  I tried several times.  Our IT team support is having the same problem with another new Centro.

  Any help would be appreciated.

  Thank you.

  I ended up installing SmartSync 2007 and it works very well.  This seems to be the only solution to make GroupWise 7.0 and Palm HotSync for collaborating with the Centro.

  Message relates to: Centro (Verizon)

• Playgrounds are learning to code 1 download error

  I recently bought an iPad Mini 2 specifically so that I could use the app to playgrounds to learn about Swift.  Whenever I try to download the playing field 'Learn to Code 1 - basics of the swift' I get an error that says: "not taken download error supported URL.  I uninstalled and reinstalled the soft playgrounds several times.  Other playgrounds (as 'learning to Code 2 - beyond the basics') download very well.  How can I bypass or fix this error and get the first playground of lesson?

  

  Finally, the playing field is downloaded successfully!

• Windows mail asking for user id and password but get error they are incorrect. When I go directly to the e-mail provider web site I can connect fine.

  Windows mail password username error

  all of a sudden windows mail asking userid and password but get error they are incorrect.  When I go directly to the web site of the email provider, I can log in fine so I know that the username and password are correct.  I also checked the in 'tools', 'options' 'connections '.

  Try to remove the account completely. Restart, and then add it again.

• ACS 5.1 13030 GANYMEDE + authentication error Question

  Hi all

  I am trying to set up a new server GANYMEDE + and am trying to update all configurations of our network to point to the new server devices.  Everything is fine looking up now, but on the ACS monitoring tool, two of our switches are constantly spamming '13030 request authentication GANYMEDE + lack a username' error.  The network admin group have no problem is authenticating with these two switches and they confirm that it is not trying to connect.  Does anyone know if ACS monitor will show any sauce to the IP addresses of these applications?

  If you click on the detail in your authentication error message, you should be able to find the 'Remote-address' field, which should tell you the remote IP address.

  If you haven't seen an IP in the address 'remote' field, you may need to check the console port / switch to see if something is connected to, what could cause the problem.

• "ERROR: the user name you have chosen already exists."

  When someone registers on my registration form (http://puremediccom.worldsecuresystems.com/puremedic-guru-register) with a user name that already exists, the form is sent, but in the notification of workwlow I see behing username "ERROR: the user name you have chosen already exists." When you try to connect to the site it does not indeed.

  Is the best way around this to request an address of email as a username? Or is it possible to run the validation on the existing user name?

  See you soon

  Jerun

  Hi Jerun,

  I think that the workaround in this case, so need email address to match the username is to use some JS.

  Please note the custom scripts is off of BC, but here is an example that may help.

  http://KB.worldsecuresystems.com/598/bc_598.html#main_Set_the_value_of_the_username_field _ equal_to_the_email_address_field

  Kind regards

  -Sidney

• An error occurred in the subscription at the following events: event subscription

  Dear all,
  
  I received an email from mail WF which is less to:
  
  + From: XXXX WAX [mailto:wfmailer@XXX WAX.com.xx] +.
  Sent: Monday, March 28, 2011 15:24
  To: XXxxHrmsSupport
  Subject: Measures to be taken: the ERROR Local event: oracle.apps.ar.hz.Location.update / oracle.apps.ar.hz.Location.update32336
  
  
  
  IN SYSADMIN
  
  Sent March 28, 11 15:23:08
  
  ID 265172
  
  
  
  
  An error occurred in the subscription at the following events: event subscription
  
  Name of the error event:
  Event Error Message:
  Battery error event:
  
  Event data: event data URL
  
  Other details of the event:
  
  
  
  
  Event field value
  
  Event name oracle.apps.ar.hz.Location.update
  
  Key oracle.apps.ar.hz.Location.update32336 event
  
  Agent WF_DEFERRED
  
  The system of PROD. OWSC.COM
  
  The agent
  
  
  To the system
  
  
  Priority 50
  
  Shipping date March 28, 2011 15:20:18
  
  Receive Date March 28, 2011 15:21:35
  
  Correlation ID
  
  Parameter: USER_ID 2085
  
  Parameter: RESP_ID 50348
  
  Parameter: RESP_APPL_ID 660
  
  Parameter: SECURITY_GROUP_ID 0
  
  Parameter: ORG_ID 81
  
  Parameter: Location_id 924
  
  Parameter: #CURRENT_PHASE 101
  
  Parameter: ERROR ERROR_TYPE
  
  Parameter: GUID_sous A242DC2FF79D70A7E030
  
  
  History of action
  
  NUM
  Action date
  Action
  Of
  TO
  Details 1
  
  + 15:23:08 + 28 MARCH 11
  Send
  SYSADMIN
  SYSADMIN
  
  
  
  
  
  Please click on one of the following choices to automatically generate an email response. Before you send the e-mail to close this notification, ensure response a response all guests include a response desired quoted value.
  
  New attempt at revival event
  
  Retry recovery event: interrupt Raise Event with Raise key event with key Event and event data recovery with the event key, event data and settings information request
  
  
  
  The client waits for a mail detailed the OED... well to want to help me find this mail WF response,
  
  This letter, which is the reason, what action I need to take to do this?
  
  Concerning
  Hameed

  Hamza says:
  Dear all,

  Kindly help me, I'm waiting for your response and advice earlier.

  Concerning
  Hameed

  Dear hamza,

  We are just volunteers, so don't expect does not have to be available in the forum 24 x 7

  And, due to production please always connect a SR.

  Thank you
  Hussein

• Validator do not return is not the results.

  Hi all

  I extended the StringValidator class in order to create a user name validator. When a new user is registered, the user name is validated on the server to check if it exists.

  The code is not thrown error and I know the remoteobject calls to work. The push sets the message, but the problem is that the result is not returned.

  The flow is correct?

  public class PosUsernameValidator extends StringValidator {
            
            private var userServiceRO:RemoteObject = new RemoteObject();
            private var validatorResults:Array = new Array();
            
            public function PosUsernameValidator(){
                 super();
                 userServiceRO.destination = "UserService";
                 userServiceRO.getUserByUserName.addEventListener("result", getUserByUserNameRH);
                 userServiceRO.getUserByUserName.addEventListener("fault", getUserByUserNameFH)
            }
            
            override protected function doValidation(value:Object):Array {
                 validatorResults = super.doValidation(value); 
                 return doForUserName(value);
            }
            
            private function doForUserName(value:Object):Array{
                 userServiceRO.getUserByUserName(String(value));
                 return validatorResults;
            }
            
            private function getUserByUserNameRH(r:ResultEvent, t:Object = null):void{
                 var user:User = r.result as User;
                 if(user!=null){
                      validatorResults.push(new ValidationResult(true, null, "Username error","Username already taken!"));
                 }
            }
            
            private function getUserByUserNameFH(f:FaultEvent, t:Object = null):void{
                 Alert.show(ObjectUtil.toString(f));
            }
            
       }
  

  Once the error message string from the server side, link it to property 'errorString' of any component of entry, you want to display the error on. This will give you the red border and a ScreenTip as if you used a validator. Don't forget to set the error return string to "" to clear the message once validation passes.

• Atheros Driver: Important update failed

  Satellite A205-S5843

  Windows 7 Home Premium, 32-bit operating system

  My network connection works. Update of Windows listed and marked the Atheros AR5007EG Wireless Network Adapter as an important update. The update fails during installation.

  Measures taken and error messages:

  1. Windows Update list Atherod a driver update important. The installation failed. "Code 800F0203 Windows Update has encountered an error unknown."
  2. Do you have a reboot. Same mistake.
  3. Execution of the Fix - It http://support/microsoft.com/kb/971058 that resets the Windows Components Wizard.
  4. Delete the Temp folder. Ran scannow.
  5. Turn it back on. Same mistake.
  6. I was able to complete the 2 Optional updates.
  7. Open the Device Manager. Right clicked and selected update driver software. Error message: 'Atheros AR5007EG Wireless Network Adapter Found. Error during installation. There is no driver selected for the item or a set of device information. »

  It can be useful if I could erase the driver update from the list of Windows Update and let it do a clean search.

  Any technical assistance or shared experience will be greatly appreciated.

  Brummyfan2, I apologize if my previous answer sounded rude. When I type, sometimes, short words carry not correctly my thoughts. You do not give the solution to part of the problem, and I appreciated your advice.

  For others who may have the same problem, see https://uk.answers.yahoo.com/question/index?qid=20100428074233AAz3rhl

  Mark the update as masked Atheros. -Open Windows Update, click right on the Atheros updates and select hide.

  Part 2 of the above referenced instructions says to delete the files downloaded for updates. I did it; I don't think, however, that it was necessary.

• HP dc7900: printer

  I installed a CH377A MODEL HP (HP 3050 ALL IN ONE PRINTER, the installation J61A said it was a success, and print a test page.)  When I send a document from your computer to the printer, it shows the document printing q but does not print the shows where the document came from - username - error pr - time - 1pg - 1, 12 mb - lpt1.  Need help on why the document is provided that error and does not print.

  The suggestion has not solved the problem, but thank you for your efforts.  When I would check for what is printing now, I noticed three different printers listed and all hp3050 showing with slight differences, I deleted both of which do not have only hp3050 J610a in the identity and I went back and plugged the usb cord that goes from the printer to the computer and I went back and the wireless connection to hard wired and that fixes the problem.

• SNMP, generic SQL data loader, and built-in Port adapters

  Anyone have any success with using the SNMP (default MIB) and/or adapters third generic data SQL Loader?

  I'm under vCenter operations v5.7 VAPP and test the custom UI. I have installed the SNMP card, but when adding my own MIB they do not appear in the drop-down list when you try to add a new resource. I followed the docs to update the card with your own MIB files and everything is a - ok until I actually try to add a resource.

  I saw this KB:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2034241

  But I loadded a few different mibs, poking around them in a mib browser, and each of them meet the requirements of that article.

  Regarding the SQL adapter. I add my instance of the adapter and the credentials and it tests fine, but when you add the resource to the environment overview screen, the 'Resource Type' dropdown is empty/non-editable. When I click ok, it of course gives me an error:

  The field 'type of Resrouce' is a required field. Please enter a value.

  Anyone who cross?

  Finally, there is documentation for the built-in Port Adapter? There is a very small excerpt in the card Guide:

  Reads a text that you set to determine the hosts and ports to monitor.

  But... where did you put this text?

  Two problems solved.

  First of all, the SNMP MIB has not picked up due to permissions on the file that I was transferred to the analytical VM. Duh. Evolution of the property of admin: admin corrects this problem. VMWare has taken this error.

  Also found a solution to the question SQL by clicking... the random button it appears that does not refresh the kind of resources until you run an auto-discovery. After crossing the Autodiscover queries, the drop-down list the type of resource is now available from the manual discovery. However, to make changes to the query/discovery files requires another automatic discovery for the changes to be picked up.

• ADF Mobile unable to change the boot screen

  I'm changing the splash screen for the ipad retina display. For this, I tried to replace the existing default - Portrait.png by one I need to use.

  When trying to deploy, I get this error:

  During playback /Users/vivekkumar/jdeveloper/mywork/AAR/deploy/AAR_ipad/temporary_xcode_project/Default-Portrait.png pngcrush taken libpng error: not a PNG filCould not found file: /Users/vivekkumar/jdeveloper/mywork/AAR/deploy/AAR_ipad/Destination_Root/Applications/AAR.app/Default-Portrait.pngCommand issued /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/copypng of errors, but has not returned a nonzero exit code to indicate failure

  Anyone know what could be the cause?  One thing, I have to mention is that the image size is 640 * 960 instead of 1280 * 768

  Vik

  try to replace Default-Portrait@2x~ipad.png

• How to generate the password encoded using agent in ODI?

  Hello
  
  I've created a scenario and I plan to them. Now, I want to create an autonomous agent to run this scenario. To do this, I update odiparams.bat file where I am mentioning the details of the repository. I want to generate the encoded password repository connection using batch processing utility officer. After you type following command at the command prompt in windows xp:
  

  agent to encode the password

  Failure of the sound connection password invalid username error display.
  
  What should do? How to generate the password encoded using batch agent utility?
  
  Thank you
  Shrinivas
  
  Published by: Shrinivas Dayma on 13 Aug 2011 02:03

  Hi Shrinivas,

  This command is for ODI 10 g.

  For 11g,.

  Encode

  Thank you
  Guru

• Can't access v$ session

  Hello
  
  I've migrated database from oracle 9i to oracle 11g (depending on the method of import/export). The Pb is that 25 GB.
  Now, few users are unable to access the v$ session. When we try to access the v$ session through some users, we get the error below
  

  SQL> SELECT SID,SERIAL#,USERNAME,OSUSER,TO_CHAR(LOGON_TIME,'MM/DD/YYYY HH:MI AM') FROM V$SESSION WHERE CLIENT_INFO='MIS0883001MEMOIP' AND STATUS!='KILLED' ORDER BY USERNAME;
  SELECT SID,SERIAL#,USERNAME,OSUSER,TO_CHAR(LOGON_TIME,'MM/DD/YYYY HH:MI AM') FROM V$SESSION WHERE CLIENT_INFO='MIS0883001MEMOIP' AND STATUS!='KILLED' ORDER BY USERNAME
                                                                     *
  ERROR at line 1:
  ORA-00942: table or view does not exist

  However, the query works fine in Oracle 9i database.
  I checked all the privileges, and it seems to be the same, as was the case in Oracle 9i.
  
  Are there limitations in Oracle 11 g that normal users cannot access table v$ session?
  
  Thank you!

  SELECT GRANTEE, 'ROL' TYPE, GRANTED_ROLE PV
    FROM DBA_ROLE_PRIVS
   WHERE GRANTEE = '&usercheck'
  UNION
  SELECT GRANTEE, 'PRV' TYPE, PRIVILEGE PV
    FROM DBA_SYS_PRIVS
   WHERE GRANTEE = '&usercheck'
  UNION
  SELECT GRANTEE,
         'OBJ' TYPE,
         MAX(DECODE(PRIVILEGE, 'WRITE', 'WRITE,')) ||
         MAX(DECODE(PRIVILEGE, 'READ', 'READ')) ||
         MAX(DECODE(PRIVILEGE, 'EXECUTE', 'EXECUTE')) ||
         MAX(DECODE(PRIVILEGE, 'SELECT', 'SELECT')) ||
         MAX(DECODE(PRIVILEGE, 'DELETE', ',DELETE')) ||
         MAX(DECODE(PRIVILEGE, 'UPDATE', ',UPDATE')) ||
         MAX(DECODE(PRIVILEGE, 'INSERT', ',INSERT')) || ' ON ' || OBJECT_TYPE || ' "' ||
         A.OWNER || '.' || TABLE_NAME || '"' PV
    FROM DBA_TAB_PRIVS A, DBA_OBJECTS B
   WHERE A.OWNER = B.OWNER
     AND A.TABLE_NAME = B.OBJECT_NAME
     AND A.GRANTEE = '&usercheck'
   GROUP BY A.OWNER, TABLE_NAME, OBJECT_TYPE, GRANTEE
  UNION
  SELECT USERNAME GRANTEE, '---' TYPE, 'empty user ---' PV
    FROM DBA_USERS
   WHERE NOT USERNAME IN (SELECT DISTINCT GRANTEE FROM DBA_ROLE_PRIVS)
     AND NOT USERNAME IN (SELECT DISTINCT GRANTEE FROM DBA_SYS_PRIVS)
     AND NOT USERNAME IN (SELECT DISTINCT GRANTEE FROM DBA_TAB_PRIVS)
     AND USERNAME LIKE '%&usercheck%'
   GROUP BY USERNAME
   ORDER BY GRANTEE, TYPE, PV;