Tapping touchpad will not be disabled

Similar Questions

• HP ENVY notebook - 14 t-j100 CT: touchpad will not be disabled

  This is a new computer with a backgrade operating system.

  Touchpad is Synaptics SMBus.

  Driver is 19.0.12.98

  Driver date is 7/28/2915

  The Windows Device Manager reports that it is the latest version

  Under setttins of properties/touchpad mouse, I tried to turn off click pad and have it off when USB pointing devie is attached. To restart the touchpad is back.

  In the same place I tried to disable the actions one by one. It won't let me not disable all of them.  It is said that the primary click must be assigned.

  I tried not to remove the Chuck. Someone told me that Windows will just reinstall it.

  I have an an old computer of different brand with the same OS. I can't disable the touchpad and it stays off.  It also uses an older driver.

  No idea how I can get it to stay out of. I searched the Internet and found no ideas that I have not mentioned.

  Hi @Andrew111,

  Thank you for your inquiry.

  I understand that you have recently purchased your laptop and you have decided to downgrade the operating system Windows 7. You tried to disable the touchpad and put off when a pointing device USB is attached. However, when you restart the touchpad is enabled again.

  Also, you said that you have the Synaptics TouchPad driver version 19.0.12.98 installed. Device Manager reported that the driver is up-to-date. When I checked the page software and drivers for your laptop and Windows 7, I noticed that a different version is recommended by HP.  Here is a link to the drivers for your laptop and software page. HP ENVY laptop - 14 t - j100 CTO (ENERGY STAR). Please click on "driver - keyboard, mouse and input devices to display a list.  Try to download this version of the Synaptics TouchPad driver and then remove and delete the existing driver, install it. Some models allow you to disable the touchpad by double clicking on the top left corner of the touch pad. Also, you should be able to disable the touchpad in device without uninstall or remove Manager. It must then remain disabled until you return and re - activate. You can also run the HP Support Assistant to help with the acquisition of the recommended software and drivers for your system.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this post as 'Accept as Solution'. If you need help, let me know and I will gladly make all that I can to help. If you want to say 'Thank you' for my efforts, click on ' Thumbs Up ' to give me a Kudos.

• My synaptics touchpad will not work

  My synaptics touchpad does not work I uninstalled and did everything in the control panel but I don't know what to do.

  Please help me.

  How to operate?

  Hello

  First, it would really help to know something more on the model of the laptop, installed windows OS, etc.

  Have you tried to activate the touchpad through Fn + F9?

• voice by tapping screen will not go away

  What happened twice today. I use the phone and the voice typing display will not disappear. I can use the phone.... i can go to the home screen, open apps, review the settings, etc, but I can't close the voice prompt, and I can't use it.

  It essentially makes the phone useless until I restart.

  I don't know why it does this. Not rooted and unlocked or anything... just stock.

  I've included a link to a short video that illustrates the problem.

  https://DL.dropboxusercontent.com/u/11731783/20150929_123443.MP4

  Any help would be appreciated.

  
  

• Laptop HP dv6 1355dx Pavilion: Synaptics Touchpad Will not scroll in applications Windows 10 - using HP dv6 1355dx Pavallion laptop

  I was wondering if anyone has found a solution to this problem.  I downloaded all the drivers, registry added/changed, ensure that scrolling is checked and researched point nausium.  Hair is gone!

  Any help is appreciated.

  HOW TO TROUBLESHOOT THE TOUCHPAD SETTING RESET

  1. Download version 18 of the Synaptics TouchPad Driver and software.
  • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'driver-keyboard, mouse and input devices.  If a Synaptics driver with a version from 18 number figure, download.
  • If a Synaptics driver with a version from 18 number is NOT listed, download the driver directly from HP (http://ftp.hp.com/pub/softpaq/sp68001-68500/sp68198.exe).
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  4. Uninstall the version 19 of the Synaptics TouchPad driver.
  • In Control Panel, select Device Manager.
  • Click on the "+' beside 'mouse and other pointing devices" to expand this category.
  • Double-click the Synaptics TouchPad of SMBus to view its properties.
  • Go to the driver tab and click on uninstall.
  • Check the box to delete the driver for this device, and then click OK to uninstall.
  5. Uninstall the version 19 of the software Synaptics TouchPad (HP control area).
  • In Control Panel, select programs and features.
  • Scroll down to the area of control of HP (published by Synaptics Incorporated) and uninstall it.
  6. Restart your computer.
  7. Install version 18 of the Synaptics TouchPad Driver and software.
  8. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates for the Synaptics TouchPad driver.  (This will block your system automatically reinstall or display of updates for the version 19 of the pilot).
  9. Change back the setting of Windows Update Services to manual automatic (delayed start).
  10. Restart your computer.
  11. Rejoice!  Your TouchPad settings will save eventually in the sessions again.

• HP Envy L8Y93AV: paved touch will not be disabled

  I disabled the touchpad Synapics in the settings, but it is not permanent and must be repeated after you log in again

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Windows Security Center will not respond, disabled Malwear cant turn it on?

  as mentioned above the screen of my computer kept going as well until I did a scan now that's fine. but the Security Center does not always react and my computer keeps freezing. I have avg that works very well.

  Hi Dar311,

  1. don't you make changes before the show?

  Step 1: Virus scanner online
  a. visit http://onecare.live.com/site/en-us/center/whatsnew.htm
  b. click "full service scan.
  c. scan the computer and remove the infected files.

  Step 2: Run SFC (System File Checker) scan to find and repair missing or corrupt system files and check the result. To do this, try the following steps:
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  Step 3: Check if a non-Microsoft program is at the origin of the problem
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. check to see if the problem persists.
  d. If the problem does not persist in the boot, it means that another non-Microsoft program is causing the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A500-1GL - Touchpad can not be disabled

  Hello

  I'm new here and I have a * problem *:
  Unfortunately, I can't turn off my touchpad. With the FN + F9 and not even with this little button above the key.

  I hope someone can help me quickly. Before, thank you in advance!

  Sorry for my bad English, I hope you understand what I mean :)
  best regards from Germany,

  Jonny ;)

  PS: my laptop: Satellite A500-1GL

  Hello

  Have you tried to reinstall a driver for the touchpad?

  Post edited by: Jeka-HE

• HP ENVY notebook - m7-k211dx: Synaptics ClickPad will not be disabled. Reactive after reboot.

  Whenever I have disable Synaptics ClickPad using the option 'disable the internal pointing device when external USB pointing device is attached', it works fine until I restart. When I return in the options, it is still once unchecked. I tried to turn off the drivers, but they are grey, but wan't to avoid this meathod ultimately because it is not ideal for me.

  Action taken:

  • Update to the latest drivers.
  • Disable the cache and history cleaning software.
  • Try different USB ports.

  (That's fine, but when I restart it unchecks itself)

  

  Thanks, Mike

  Mike,

  Sorry it took me awhile. I have all the "Nitty Gritty" details if you want, but the "net-net" is the update of this option writes in "HKCU" and there is a "HKLM" in the register which is default location and never changes.

  I managed to do that work by changing the corresponding section of HKLM in the registry. It not be "rejected" at each logon as the HKCU section seems to be. The ICON remained "hidden" which is what I wanted to happen with the change below.

  Try this and see if it works for you!

  1. open Regedit.exe

  2. go to the location next to the register:

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTPEnh

  3. Note the REG_DWORD value named - TrayIcon

  4. the numbers of data match this way:

  0 x 0000001 (1) DEFAULT = which is the active ICON

  0 x 0000011 (17) = animated ICON

  0 x 00000021 (33) = disabled ICON

  5. change it to what you have been wishing, in my case it was 21 Hex or Dec 33 for DISABLED ICON.

  6. exit Registry Editor

  7. restart to test or log-off/log-on to test.

  NOTE: If REG_DWORD is not here, it is probably safe to add it, but in my case it was already there it was just the value 1 and never changed when I changed the settings. Only the section HKCU did who has always retired at the end of my session when I disconnected or restarted.

  Let me know the results! I hope it suits it for you!

  Edward

• System sounds will not be disabled

  Specific irritation, I got right now is the fact that I did not open Outlook (2010) on my laptop to... Well, a lot of time. So now, I have a ton of new notifications by e-mail, pay, and they do not close to the top.

  First of all, I tried to set the Notification Mail new Windows 'no sound': no effect. I restarted Outlook without effect; I restarted my PC without effect. Then I tried to turn off all the system sounds: no effect. Yet once I restarted Outlook and the PC without effect. Then, I remembered to check Outlook localized parameters and not selected "beep": no effect. Yet once I restarted Outlook and the PC without effect. (In addition, this problem is not isolated to Outlook because after each)
  the system restarts, other system alert sounds made noise).

  I am at a total loss. I simply cut the sound, but I'm watching DVDs. It is, in fact, an old problem that I couldn't be bothered solve before, but now I want it fixed.

  I solved this problem by opening the volume mixer (a left click on the volume in the system tray icon, then clicking on 'mixer'); I was then able to mute the system sounds and sounds of individual (including Outlook) application in now the volume of the speaker to DVD, etc..

• HP Touchpad calendar tablet will not synchronize entered Google Calendar online

  Entries posted to Google calendar on my laptop perfectly sync for the WebOS calendar on the shelf but enties on my HP Touchpad will not sync to Google Calendar.

  A question, I can't find an answer: in preferences & accounts the default calendar is displayed as the HPWebOS account.  It should be one or Google Calendar.  If the latter, when I type that account it will not appear as a default.  Maybe it is not supposed to be the default calendar?

  Any help from an experienced user will be appreciated.

  When you pull the top of the page for Google Calendar, tap the icon just to the right of the web address box.  It looks like a square with an arrow pointing to the right.

  Now you will see the options to 'Add bookmark' or 'add to Launcher '.  The first will create a bookmark for you in the browser, the second will the page as an icon in the Launcher.

  If you want, you could drag the icon created on your home page.

  WyreNut

• Touchpad does not scroll and the lower bar disappears on Satellite Pro L

  Hi, as I said just on the laptop as usual, but for some reason now the Touchpad will not Parade (but work the touch to click). And the lower bar disappears only when I'm on the internet chrome (chrome on his party, but still there on internet explore, but who wants to use the Explorer! lol).

  It makes it so difficult to click between the research and writing! It is still there as it should be on doc word, excel etc.

  Little things, but super boring and I don't understand why change, or how they're connected. Hold fixed, its so stupid he would change just on me.

  Any help is very appreciated!
  Thank you, Jenna

  Hello

  The touchpad settings can be changed in Control Panel-> mouse
  Here, you will have to go to the last tab advanced and click on the Advanced button.

  You should now get a menu with all the options available for touchpad.
  It should be an option called use scroll function. This should be checked/enabled.

  Check it!

• Equium A300D will not be market or start - stuck on the eve

  Hello

  Toshiba support staff,

  I have a Toshiba Equium A300D who suddenly decided to not turn on - I have pressed the power button down, alt del, shot control button
  it exceeds to find a reset button and found no button at the back - don't know if there is any other command key that I can use so he can start.

  Can someone out there suggest what I can do?
  It is as if he is trapped in mode 'sleep'.

  Satellite light isn't on one or things of the touchpad will not turn on...

  Thank you

  Barbara

  > Toshiba support staff.
  First of all, it is a forum from user to user, I doubt that you will find here a people of Toshiba

  > I have a Toshiba Equium A300D who suddenly decided to not turn on - I have pressed the power button, maintained alt del, shot control
  it exceeds to find a reset button and found no button at the back - don't know if there is any other command key that I can use so he can start.

  Try this:
  Remove the battery, disconnect the adapter
  Wait several minutes (30 minutes), then reconnect the two parts.

  Then try to turn on the machine.
  Check it out and post the results.

  Good luck

• CD/DVD does not recognize the disks and will not be closed

  original title: problem with tray D

  I use a unit of reconditiioned Dell 8300 with XP Professional system.  The unit was slow and gel a bit so, in one of the slow itls break cycles I insereted in the toolbar an old XP disc I had to front to see if that would help and after I closed the tray I noise loud crash and the tray came out showing broked pieces of the disc. I flipped the unit and hit the bottom and more pieces of the disc came out.  Now the set is not closed.  If I insert a workable disc and maintain status bar tap it will not do anything and a window tells me to insert a disc. Shou ld I try to disassemble the unti to see if there's still some piece or pieces preventing reset the tray? Or is it to say that I'm going to my repairman authorized Microsoft for the rerpair?  E-mail address is removed from the privacy *.

  I'm really sorry to laugh, but this is a funniest post I've ever seen. Apparently you've damaged the device rom (cd/dvd drive) replace it with a new one. They measure less $ $30 .00usd. Furthermore, placing the old drive in the drive xp will not improve the performance of the computer. Looks like you have some malware. I recommend that you post in the section virus/malware of the forum on the link below for a complete analysis. The forum is free. While I could recommend some scanners, I think you need a full inspection.

  Free Forum: repair-Bots Online

• HP Notebook G60 237 - NR touchpad does not turn off

  My touchpad will not shut, even if I press the button above the touchpad. How to solve this? It affects documents when I type.

  Hello

  Reinstall the drivers for the touchpad and check the results.

  The most recent driver is available here.