Target device Panel

Similar Questions

• The icon "Open Panel target Device" always appears in the upper right of games. How to get rid of him? Thank you

  How can I get rid of the 'Open Target device Panel that always appears in the upper right corner of all games.  Thought it would go away after awhile, but

  Nothing helps.  It's still there and a real nuisance.  Your help would be greatly appreciated.

  Thank you

  If you run a computer Toshiba do the following:
  Access the Internet Exploer.
  In the right corner, go to tools, select Manage Add-ons.
  Disable the Toshiba Media Controller Plug.
  Restart Internet Explorer.

  The next time you start the game, the icon should be gone.

  If you don't have a Toshiba computer, check in the management of Add-ons for any add-ons, you're not familiar with that.

  I hope this helps.

• count the number of targets, devices and paths by hba for each host with powercli 5.5

  Hi all

  I'm writing this Question again in the community, was not able to found the answer I was looking for in the nets:

  https://communities.VMware.com/thread/516226?start=0 & tstart = 0

  https://communities.VMware.com/thread/293531

  I went through the scripts provided in the community, but seems that t not work on powercli 5.5.

  ///

  # The target account, devices and paths for each host

  Get-Cluster $cluster | Get-VMHost | Sort-Object-property name. {ForEach-Object

  $VMHost = $_

  $VMHost | Get-VMHostHba-type FibreChannel | Sort-Object-property device | {ForEach-Object

  $VMHostHba = $_

  $ScsiLun = $VMHostHba | Get-ScsiLun

  If {($ScsiLun)

  $ScsiLunPath = $ScsiLun | Get-ScsiLunPath | `

  Where-Object {$_.} Name - like "$($VMHostHba.Device) *"} ".

  $Targets = ($ScsiLunPath |) »

  Group-object - property SanID | Measure - Object). County

  $Devices = ($ScsiLun |) Measure - Object). County

  $Paths = ($ScsiLunPath |) Measure - Object). County

  }

  Else {}

  $Targets = 0

  $Devices = 0

  $Paths = 0

  }

  $Report = "" | Select-Object - property VMHost, HBA, target devices, paths

  $Report.VMHost = $VMHost.Name

  $Report.HBA = $VMHostHba.Device

  $Report.Targets = $Targets

  $Report.Devices = $Devices

  $Report.Paths = $Paths

  $Report

  }

  }

  ///

  I went through the script LucD posted below: but it's not exactly what I'm looking for.

  LucD : can you please change the same for me please.   to count the number of paths per hba for each host with powercli 5.5, devices and targets.

  //

  $esx = get-VMHost < host name >

  foreach ($hba to (VMHostHba Get - VMHost $esx - type "FibreChannel")) {}

  $target = ((get - see $hba. VMhost). Config.StorageDevice.ScsiTopology.Adapter | where {$_.} Adapter - eq $hba. Key}). Goal

  $luns = get-ScsiLun - Hba $hba - LunType 'disk '.

  $nrPaths = ($target | % {$_.}) Lun.Count} | Measure - Object - sum). Sum

  Write-Host $hba. Device ' target: ' $target. County "devices:" $luns. County ' path: ' $nrPaths

  }

  //

  I'll be grateful for any help.

  Tarun Gupta

  Try something like this

  {foreach ($esx in Get-VMHost)

  foreach ($hba to (VMHostHba Get - VMHost $esx - type "FibreChannel")) {}

  $target = ((get - see $hba. VMhost). Config.StorageDevice.ScsiTopology.Adapter | where {$_.} Adapter - eq $hba. Key}). Goal

  $luns = get-ScsiLun - Hba $hba - LunType "disk" - ErrorAction SilentlyContinue

  $nrPaths = ($target | % {$_.}) Lun.Count} | Measure - Object - sum). Sum

  $props [ordered] = @ {}

  VMHost = $esx.name

  HBA = $hba. Name

  Target = $target. County

  Device = $luns. County

  Path = $nrPaths

  }

  New-object PSObject-property $props

  }

  }

• Error when burning DVDs in pre 8.0 "target error device - the device is not suitable for use.

  I'm trying to burn a dvd in first elements 8.0 but after 96% iam getting this error:

  "device target error - the device is not suitable for use.

  I tried all these steps according to this link: http://kb2.Adobe.com/CPS/515/cpsid_51553.html .

  System configration:

  Win vista 32 bit.

  Processor: Amd athlon 64 dual core 2.60 GHz.

  RAM: 3 GB

  Graphics card: nvidia geforce 6150 is.

  Model number of camcorder: JVC gz-hm320.

  Format: .mts

  Image size: 1920/1080

  Frame rate: 29.97.

  

  Please look at this problem.

  Concerning

  Manoj Khati

  Here are the search results for your error: http://forums.adobe.com/search.jspa?q=device+error+target+device+isn%27t+suitable+for+use& resultTypes = MESSAGE & dateRange = all & communityID = 3271 & username = & numResults = 15 & rankBy = 10001

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• XNET Signal list control deployed to target RT OR-cDAQ-9133

  I develop a VI to read and record the signals from the engine CAN. One of the requirements is that it will be a stand-alone application which runs on the target device, a device of real-time OR-cDAQ-9133 with a module NI9861. It also has a module analog thermocouple which is read and recorded alongside the CAN signals.

  in any case, I did the front panel so that the user can choose the CAN signals of a drop-down list of all signals in the XNET database and then run the VI to display and record the signals. On the development of PC, it works as expected, I can change the signals before you run the VI.

  When I build and deploy the project I am no longer able to do. The drop-down boxes are grayed out and do not respond to clicks. How to allow the user to choose signals to read and log?

  I've attached a picture to better explain the control of front panel, I have for the user to choose the signals. Nothing complicated just to select the node and right click to create the control. The image is what it looks like on the development of PC, I have not a screen capture of the target device.

  I was able to find a work around. I used an array of enum on the front panel controls that are then wired in a case surrounded by a loop structure for. This generates the signals XNET list based on the table of the enum. Probably not a more elegant solution, but it works and allows the CAN signals to choose in the front panel on the target of RT.

• Problem with Simulink model dll running on target RT

  Hello!

  At the beginning I specify software and hardware that I use:

  LabVIEW 8.5

  Simulation Interface Toolkit 4.0.0

  Microsoft Visual C++ 6.0

  MATLAB 7.4.0 (R2007a)

  NEITHER cRIO-9014

  At first, I did a simple Simulink model (Sine generator, gain and an outdoor sink), then I started with vi empty and abandoned command digital for the gain and the waveform for the sine table. I grabbed SIT Connection Manager and that you have chosen Simulation Environment case. Then I loaded a template file, the mapped controls and indicators. Everything worked like a charm. Problems started when I tried to turn on an RT target. Maybe I'll explain step by step what I did and after the error at the end.

  1. I created a dll from a MATLAB simulink model file. I selected in time real workshop one C language and target to "nidll.tlc". The I compiled without error.

  2. I entered LabVIEW SIT Connection Manager and changed the host execution target in real time. File browser has popped up and I selected the dll already made my template file.

  3. in Add target devices on window, I chose 'existing or peripheral target' and I chose in the other menu in time real CompactRIO. There was my compactrio system, I chose it and LabVIEW began to search for devices.

  4. after that, I clicked the "Ok" button in the SIT connection manager.

  5. I clicked the run button before my vi file panel and LabVIEW began deployment.

  And here the deployment failed with the following error message:

  Deployment of 192.168.1.2 (parameters target successfully deployed)
  Deployment compatOpenFileOperation.vi (5.35 K)
  Deployment of SIT copies values from Replay on Inports.vi (10,96 K)
  Deployment of SIT expand newspapers Signal Names.vi (4.99 K)
  Deployment of SIT PostOutputs.vi
  Could not download SIT PostOutputs.vi
  LabVIEW: Unable to load the shared library SITs.outostOutputs:E on the target RT device.

  I tried to do everything once again and got a little different error message:

  Deployment of 192.168.1.2 (parameters target successfully deployed)
  Deployment of common access to specific Path.vi (22.25 K) path
  Deployment of SIT runtime DLL query.vi
  Could not download SIT runtime DLL query.vi
  LabVIEW: Unable to load the shared library SITs.out:TaskRunTimeInfo:E on the device target RT.

  What I am doing wrong? Any ideas? I will be extremely grateful for the ideas!

  Best regards

  Pawel

  SIT 4.0 does not support VxWorks targets as your cRIO. SIT 5.0 was the first version to have any level of support for this.

  I would recommend contacting support to discuss a possible workaround solution. If they have questions, you can reference this post on the forum and they can contact me. I hope this helps.

• How to fill out the list devices shared in the sidebar of finder

  The Finder sidebar shows no sharing and peripherals.  2 mac under v10.11.4, each set to share files and screens between them and set for the remote access connection.  Both on the same account iCloud.

  Try to make a remote access connection and cannot start without shared target device in the my sidebar of the Finder.

  Pls help.

  You have your preferences set Finder at? Finder > Preferences > sidebar > shared - all options are checked?

• Re: load "TSL633A_TO03.exe" device tergiet. What and how do I do?

  I want to update my Satellite!
  To don't know what it means to "Read me":

  III. load 'TSL633A_TO03.exe' or 'TSL633P_TO03.exe' device tergiet.

  What is "tergiet unit?

  I assume that you are writing about update firmware for the optical disc drive. I don't know what model of laptop you have exactly and which read me file that you mean exactly, but if the optical disk drive works well, and if you do not have a firmware update problems should not be made.

  The target device must be your laptop, but what else?

• There is no volume after restarting the device. Need urgent help

  Hello.

  Our ReadyNAS RN31600 iSCSI target device. We have (had) two LUNS of 8 terabytes each built on X - RAID 5, which are presented on a Windows Server.

  This device is less than a year, and he began to have problems today. First two LUNS disappeared from the iSCSI (WS 2008 R2) client. When we tried to restart the NAS server, he's hanging on "restart now, see you soon."

  We power off of the switch and after restarting, two LUNS seem to have disappeared, and the unit is empty somehow? How to solve this problem? Or is it quite normal on the Netgear devices to suddenly lose 16 terabytes of data?

  The GUI shows "there is no volume" and also "delete inactive volumes using disk. Disc # 1,2,3,4,5,6 ". This means that all the disks.

  Firmware is 6.4.0.

  And no, we don't have backups, because this device is used to a backup unit.

  I suggest you to contact support (support.netgear.com), because I think it will be faster than from here.

• This device cannot start. (Code 10) DVD

  I have a HP Pavilion a1240n runnning Windows 8.1 nor the ATA DVD HP 740 b device or appliance IDE\CdRomLITE-ON_DVDRW_SOHW-work. I get the following message appears in the Device Manager box

  This device cannot start. (Code 10)

  The specified request is not a valid operation for the target device.

  Tried to deactivate, activate, uninstall and reinstall. The drivers are all to date. Are these DVD and CD with Windown 8.1 comaptibe?

  I also have problems with the computer recognizing my drive external USB and iPod.

  Impossible to update a such there need of files on the disk and hard drives do not work.

  Help please I know it's an old computer, but really like it to be fully functional. Thank you.

  Hello:

  Try each resolution 2, 3 and 5 from the link below to solve the problem you are having.

  https://support.Microsoft.com/en-us/KB/314060

• What is the right method to access the functions in a DLL compiled with a target of THIS (Arm)?

  I tried without success to access functions in a DLL that is meant for Windows CE.  My Labview application objective is a touchscreen the arm-based device.

  All, thank you very much for all your help.  I was still unable to find a method that did not produce an error when compiling... calls for a vi or a C file to be included.  (ex: [feature] is a missing file vi or C).  I also tried including the import library for the DLL, as shown above in the email from Paul, but I still received the same error.  This has been a problem for me, while testing with Win32 non-targets... in this case a device of THIS 5.0 touch screen based on the arm.

  However, I found a solution feasible and quite simple:

  Instead of trying to register the import library DLL as a file depending on the vi, I changed to build a DLL (and associated import lib) to build a static library (.lib) and included while .lib file as a dependent in the build specification.  This had the effect of linking statically, object code rather than wait for the vi compiler to compile the C source code or link a DLL import for a non-Win32 target library.  It is also not necessary to include an additional step in the installation of the DLL on the target device.  The library, I created is just a simple interface to another DLL already on the target device, which had struggled to interface directly to Labview.  Given that it is only a role of simple interface, this solution of library static woked well because it was not essential to have its available as a separately scalable DLL functions.

• Multi serial port on target RT installation

  Hello

  I use a pc dekstop as a real-time target.

  I use the realtime module 2015 on host and pharlab 13.1 in time real OS on the device target.

  I use a 1 × DB44 serial port for 4 × RS232 (PCI Serial Card made by the MOXSA company) in the RT target.

  But the mentioned card PCI serial ports are not recognized in the Software NI MAX (it is not visible in the tree of device and Interface).

  How can I install the driver for the PCI card on the target device?

  Is - what the PCI card must necessarily come from National instrument?

  Best regards

  NEITHER VISA you installed on the computer?

  It is possible that specific device requires drivers that do not work in LV RT. You should ask the supplier of the device if this is the case.

  Norbert

• Target visible FPGA in MAX but not in LabVIEW

  Hey!

  I recently installed a RIO device. Before installing the equipment, I installed the module FPGA & RIO 3.0 as directed. Now, I can see the device in a position & automation explorer, but its not in list "Add target & devices. It says "No device found" in the existing devices tab. I don't understand the problem. :/

  Add the target under 'my computer '.

  Christian

• OptiPlex GX620 with Analog Devices ADI 198 x integrated Audio and Windows 7

  Hello...

  I have an Optiplex GX620 with built-in Bios version A11 and 198 X Audio.  I installed Windows 7 on the system and it works fine, except for the Audio.  In recording the sound device Panel, it does not show the adaptors to THE Stereo Mix as active or.  DELL provides on issueing an updated driver after October 22, 2009?  Is there somewhere else I can look for these drivers up to date?

  Thank you.

  Analog Devices ADI 198 x integrated Audio
   
  Release date: 24/01/2007
  Version: A255.12.01.7010
  Important: recommended
  Download Type: driver
  File format: hard drive
  File size: 3MB

  R145551. EXE 32 BIT

  R145149. EXE 64-BIT

  Compatibility

  Systems OptiPlex GX280 OptiPlex GX520 OptiPlex GX620 OptiPlex SX280 Precision 370 Precision 470 Precision 670

• Cannot get new devices to show the CPU, memory and Ping results

  Hello

  I'm a new Foglight administrator at my company and I'm having trouble to add devices successfully to monitor. My steps were the following:

  (1) add devices through SNMP discovery (verified SNMP was running on the target device!)

  (2) enter the IP address, updated Intel SNMP community

  The software adds the device, but says it does not.

  What needs to be active for Foflight monitor the devices successfully?

  Thank you

  In fact, I solved the problem.

  Displacement monitoring for SCOM.

  Appreciate the follow-up