Task Manager questions

Similar Questions

• 29 Firefox fails to come out properly and continues to run in the Task Manager.

  It is a continuation of a thread found here:
  https://support.mozilla.org/en-US/questions/997448 by Compumind.

  I pointed out that I had the same experience, especially at the opening of the email links in Thunderbird. I reported also that forced me to go back to 28 FF.

  Moses responded by top wire and suggested:
  (1) download a fresh installer of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) the release of Firefox.

  (3) rename the folder

  C:\Program Files (x 86) \Mozilla Firefox

  TO

  C:\Program Files (x 86) \OldFirefox

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  I followed these instructions carefully but no joy. When installing 29 FF, not only refused to leave (using "exit") and continue to run in the Task Manager up until I killed him after the opening of links in Thunderbird, but I find that he refused to come out after a simple navigation and links.

  Moses had asked that I didn't answer in the original thread, so I re-post here.

  In my view, that there is a serious bug. With Firefox 28... no problem don't except a minor that I have indicated here:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=1002089

  Yet once I am obliged to 28 FF, although I miss the nice interface and security patches, I need to have a browser that works properly. My wife never even saw the Manager of the tasks before so that's the problem.

  In addition, "guesses" made with this post, the only other thing usual outside that I do, is to have a security policy about cookies (accept by default... I make exceptions for cookies I want to keep and have several that are "allow only for the session.") I also FF the value delete history of navigation at the exit, but that takes a fraction of a second.

  I look forward to when this matter can be addressed successfully and I am able to use 29 FF (and out properly... I can't wait for my wife to follow all of these instructions and it often close manually in the Manager of tasks... or what I want to do this.)

  Good luck for all Mozilla projects. Having installed 29 FF twice and then back return 28 twice, I'll wait and see how this plays out. Please don't send me the standard "start in safe mode", 'restart with disabled modules', 'reset Firefox' stuff (the last time that completely destroyed my browser). I don't think that is what is happening.

  Moses added that there is a problem with the e-mail notifications passing by, so take your time, friends.

  I think now (temporarily) this bug or problem has its roots in "history leaving Compensation."

  I made the leap after a few game with 29 PortableFirefox and reading the blog post linked here:

  [https://support.mozilla.org/en-US/que.../997918#answer-566755]

  .. .and installed 29 FF on my previous FF28 on my box. I unchecked the "clear history on exit" which was only to delete my history, not cookies or anything else, cor - el. My setting should not accept cookies unless I make an exception. Until the FF developers find a way to do this is functional, I'll just have to manually delete the history.

  Furthermore, John99, you want to maybe privacy.sanitize.sanitizeOnShutdown set to 'False', not 'true' If you want to stop the automatic deletion of the history at the exit (attempt).

  I've been running for about 6 hours. without experiencing the bug 'suspended '. So, I can live with that for now until this bug is fixed. It should be fixed... browsers are supposed to be able to do things like that.

  On the other hand, I could find things go wrong... but so far I'm not having a problem.

  I for several hours and will let you know later if things change.

  Kind regards

  Axis

• When firefox crashes of a memory leak, why you can not display the offending tab? Improvement: a task manager as Manager of the display use by tab tab / extension.

  I generally keep windows with multiple tabs open. It is possible that this causes more accidents because the number of pages multiplies any effect that the majority of users with less pages/tabs would suffer. I had problems with Firefox blocks Manager Windows that I looked into this question a lot of variables to track tasks to help. Bottom line, the accident is caused by increasing the memory usage may be caused by the flash add on which fact much IO reads at least a page/tab incriminated could some sites use flash to read my disc without permission, and there is a leak memory in a flash of code uses the sites? I searched the Web for a task manager as add-on for Firefox tabs that would determine the offending page/tab/add-on/extension. This seems an excellent idea which has not been implemented. Since I am a developer, I would be happy to implement, but would like some advice because my knowledge of your product is only at the level of the user.

  There are currently: page of memory that is actively developed. A "task manager" of all kinds is also in the works as far as I KNOW. If you want to help, your best bet is to find the bug there is Bugzilla. If you have the skills coding I can help you in touch with a mentor - let me know.

• Portege M700-106: unable to start the task manager & programs after Vista sleep

  Hello

  In fact I am facing problem like below...
  Configuration: Portege M700-106 with upgrades (Hynix Kingston 4 GB, WD Scorpio 320 GB with jumper default config doesn't = no jumper)
  Reinstalled system from Toshiba DVD recovery, all updates possible on web too.

  However, when I wake Vista from the suspense Task Manager I think I can't start (continuous report) some programs (e.g. ThunderbirdPortable of SDHC), all other programs works well enough.

  Anyone can know the reason, solution for this?

  Thanks for help

  Staszek

  Hello

  As far as I understand, you are not able to use some 3rd party applications after the awakening of Eve Vista but other applications running ok only software Thunderbird Portable to the SDHC card.

  Well, I have come to the conclusion that the card reader can hangs after the awakening of the stand by mode or the ThunderbirdPortable should be repeated. Probably it s not a problem of Vista, but question ThunderbirdPortable.
  Have you tried to search if this is a known issue with this software?

  I would recommend this review!

• Server 2008R2 Task Manager will not run the task

  Hi all

  I have problems with automating a task on the server 2008R2, I have a limited user on my server which account is used to run a media server (Twonkymedia) and a home automation program called "Domoticz".

  Because I don't want the user to have access to the normal system resources, it always takes administrator privileges to run the program and access to the database, because I don't want to manually enter credentials of Directors whenever this user logs that I taught on the automation of this with Task Scheduler.

  I managed to create a task that toured to launch applications with admin credentialsb (simply by using the command runas in the path did not work) but once I connect and the still as the "limited" user task that has a shortcut placed in the startup folder does not start specific applications When I open the Task Manager to diagnose errors, she appears as running.

  Both users are given exclusive rights to start as a processing batch.

  22/08/2016 information information on the process created task 129 21:59:40
  Information 22/08/2016 21:59:40 200 Action started in f33c3a46-e705-408c-a675-08aabbecf4bb (1)
  22/08/2016 information 21:59:40 100 f33c3a46-e705-408c-a675-08aabbecf4bb launched task (1)
  22/08/2016 information 21:59:40 319 message task engine received to start the task (1)
  22/08/2016 information 21:59:40 110 task triggered by the user of information f33c3a46-e705-408c-a675-08aabbecf4bb

  The config is as follows;

  In general: it is set to run if the user is logged in or not, and it must run with the highest privileges.

  Its triggered when no user is logged on

  Actions are the following; Start a program

  Program 1: "C:\Program Files (x86)\Domoticz\domoticz.exe ' Arguments www - 1202 - 8000 sslwww

  Start in: "C:\Program Files (x 86) \Domoticz.

  Program 2: "C:\Program Files (x86)\Twonky\TwonkyServer\twonkytray.exe.

  Any idea what's going on here?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012R2 Task Manager

  We have a question about the Task Manager in Windows Server 2012R2.

  We have a client running on a Terminal Server, they want to use the Task Manager to kill a task that is not responding.

  By default, only the user can see all taks running, also other users.

  Is there a way to partially block it? Perhaps in a GPO?

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Please do not hesitate to contact us if you have other questions related to Windows.

• Why my poster Task Manager my CPU 100% busy so no or few applications is running?

  Why my poster Task Manager my CPU 100% busy so no or few applications is running? In particular the process explorer.exe (the OS) occupies CPU resourses.

  Thank you very much

  Angelo

  Hello

  Thank you for your kind reply.

  My answers to your questions:

  1 processor: Intel Core 2 CPU 4300 1.80 GHz

  2. RAM: 2.00 GB

  3 OS architecture: 32-bit

  4. OS version: Windows 7 Ultimate SP1 (V6.1.7601)

  As I said before, CPU usage was 100% even if no demand had started. The operating system (explorer.exe) used about 60% of the CPU.

  Microsoft Security Essentials has not helped.

  In the meantime, I found a solution. After using restore system several times (not only one!), I managed to get my normal working conditions in return.

  Problem solved, thanks again!

  Best regards

  Angelo

  (Genoa, Italy)

• Microsoft Money - when closing down, it saves ok but there is a message saying that the operation cannot be completed. I then use the Task Manager to complete.

  I use Money version 1105, 2004 updated.  I have 2 qusstions-

  1. in closing down, it saves ok but there is a message saying that the operation cannot be completed.  I then use the Task Manager to complete.

  2. is there a version of Money that runs this file?  I tried Sunset but does not recognize my file.

  Any help would be great, thanks in advance

  Eric

  For any question on any version of Microsoft Money, ask http://social.microsoft.com/Forums/en/money/threads.

  Make sure your data and Money backup files are in Documents or another non-protected area, not the default money Program Files or changes and updates will not be saved.

  Unless you are in the USA, the version of Money 2005 (released in 2004) 14.0.120.1105 is the latest available. Sunset silver bed only U.S. data files.

  Installation file to Money 2005 International English QFE2 (not for USA, Canada, UK) from Microsoft, including stand-alone updates 1105, is available at http://www.microsoft.com/download/en/details.aspx?id=26922

  Money 2005 UK - QFE2 (the fixed standalone UK Money 2005 file) can be downloaded from the link to http://www.microsoft.com/download/en/details.aspx?id=26915

• The Task Manager does not appear, nothing happens when you select it

  It is very difficult to get help. Now, I'm not sure if this is the right forum and place to be. I need help to get the Task Manager which has disappeared from my computer. I click right on the taskbar, and then click on task manager and nothing appeared. Please advise on how to find him.

  Hi disillusionedvery,

  If you're not, try to login as an administrator and see if that makes a difference.  If so, we still have a problem, but at least we know the Task Manager is here.  If you have any other user accounts on the computer, try connecting them and see if they all have the same problem or if it is limited to one account.  Your profile may be damaged and if this is the case, post back and I will provide procedures about how to fix it.

  Try pressing CTRL-ALT-DEL all at the same time and click Task Manager on the screen that appear and see if it works to access the Task Manager.

  If this does not work, let's try the following:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  , Type sfc/scannow go and let it run.  It will scan and try to the difficulty of some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If it does not, then thanks for posting error messages in the event viewer on the Task Manager (Start / Control Panel / administrative tools / Event Viewer).  Look in the system section.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  Do you know when this problem started?  If it has been reasonably recent, try a restore of the system to a point in time BEFORE the problem started. If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If this does not work, you may be infected with malware.  Update and run a scan complete with any security software you use.  Then, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx.  If you find something, especially something you can't delete, then after return.

  That's enough for now.  One of these procedures will be hopefully resolved or at least identify the problem.  If this isn't the case, please post back with the answers to the above questions, results of the tests and procedures that you did (including copies of errors if any found), your version of Windows (for example, 32-bit Vista Business SP2) and anything else that you think may be useful.  We will then decide where to go was from there, armed with more information and know what and did not work.

  I hope this helps.

  Good luck!

• When I try to get the Task Manager, I get a window saying disabled by administrator I am the Admin so what is going on and how to cure it

  When itry Task Manager box said that the Task Manager is disabled by the administrator. I'm the only user / administrator. What is the problem and the remedy?

  Hi lancemusgrove,.

  It seems to be a problem of infection.

  What security software is installed on the machine?

  When the question began?

  I recommend you to run online Virus Scan to remove any infections, as appropriate.

  Follow the link below to start the free online scan:

  http://OneCare.live.com/site/en-us/default.htm

  Also follow this mentioned below

  link:http://www.microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

• Why are there no end process in the Task Manager tab.

  Why are there no end tab process in the Task Manager because it usta be a on windows xp, that makes it eaiser to end a game if you do not want it to start. In addition, some games when you exit out of them sometimes play on words to say (on steam) is currently unavailable. That when I try to log out of steam to get the game to work again, he says "game works must end game before disconnection which is the process you need to put end to which you can't because there is no process tab.

  Hi dontknopass,
  
  a. what game you try to play?
  b. did you a software or hardware changes recently?
  c. normally, you should get a process in the Task Manager tab, end process tab is located at the bottom of the Task Manager window.
  
  Method 1.
  If you think that any activity of virus that I highly recommend to run the Virus Scan.
  I recommend you to run online Virus Scan to remove any infections, as appropriate.
  Follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
  The following thread discusses the removal of viruses and malware online:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42
   
  Method 2.
  Let us see if we can get into safe mode, we can perform a clean boot for troubleshooting.
  Please check if you are facing the same question when working in safe mode.
  Step 1 Mode safe
  1. reboot your computer.
  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  3. using the arrow keys, select the desired option of Mode safe.
  4. press the Enter key on your keyboard to start in safe mode of Windows 7.
  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  6 do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step 2 clean boot
  If you have the tab process end in safe mode you will need to perform a clean boot to find the program that is causing and then disable or remove.
  Here are the steps to do:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 upgrade from vista boots without icons or bar spots and can't access the Task Manager.

  New computer was installed with Vista and came with the Windows 7 upgrade when it was released. The dealer did the upgrade. Now, when I boot, I have no icons or taskbar and doesn't get to the Task Manager to start explorer.exe.
  After killing the power I can restart which can sometimes. Once the computer is in place, it works OK.
  I don't know if I can do a repair of win7 or not?

  Thanks in advance for your suggestions. CIE

  Did you take the computer back to the retailer under your warranty?

  Windows Update has nothing to do with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• change suddenly in the Task Manager

  All of a sudden (nothing has been installed), changed the Task Manager window.  It can now be minimized and right-click on its process in the bar tasks generates no response.  I can still close by closing all windows, but if I open any other application, the Task Manager window also opens.
  I am running Vista Home Premium SP1

  Hi Newmarket,

  Thanks for posting your question.

  Since when are you facing this problem?

  I recommend the following steps.

  Step 1:

  Try to restore the computer to a date where this question was not intervened.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/

  Step 2:
  
  Run a virus scan online for all infections.
  http://OneCare.live.com/site/en-AU/default.htm?mkt=en-AU

  Kind regards

  Cedric M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• restoration of the Task Manager Office

  I recently changed the settings in the Task Manager and closed iexplorer (?). Now all the icons on the desktop disappeared and I can't go to the start menu. How can I cancel my modification that was made and restore the office via the Task Manager? Or could you let me know how I can get start menu and so do a system restore?

  Open the Task Manager-> click New task-> Type

  Explorer.exe

  Click OK.

  If this post answers your question, click mark as answer .

• Under the "Task Manager", which is the unsecurapps.exe Function?

  I'm trying to find out what made the 'unsecurapps.exe' function in the Task Manager? or is linked to?

  If you have spelled the name correctly, then it is very likely to be malicious.

  When a Google search produces no hits or suspicious hits (the case of unsecurapps.exe), the answer usually is that the file in question is focused on the malware.

  What antivirus application do you use? Is current and never expired subscription?

  Download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  However, if the task is actually unsecapp.exe, it's another story.

  If you're running Vista (what version of Windows is installed, including service pack?):

  Sink to receive asynchronous callbacks for the WMI client application running in different processes. WMI, Windows Management Instrumentation, allows developers to write scripts and programs for the management or querying features, user accounts, Windows services, running programs, networking and many other internal technical aspects of Windows.

  This particular task, UNSECAPP. EXE, is launched by Windows Vista when a program needs to use WMI programming - it offers a conduit (sink) programs to receive the results of their WMI queries and commands windows.

  Unsecapp.exe is not limited to Vista, but also concerns the use of Windows Management Instrumentation in XP sp2: http://support.microsoft.com/kb/875605

  What do you do when unsecapp.exe appears in the Task Manager?