Task Scheduler cannot launch pps

Similar Questions

• Error 1068: Task Scheduler cannot start, impossible defragmentation

  I tried to defrag my sister's computer and ran into a problem.  Defragmentation wouldn't because Task Scheduler would not start.  Long story short: operating system Windows 7.  My attempts to solve the problem, there are messages that I continued to receive:

  "Windows would not start the Scheduler Service on the Local computer.

  and

  "ERROR 1068: the dependency service or group could start."

  Please, I need help.  Any ideas?  Do you need more information?

  Thank you in advance,

  Laura

  Hi Laura,

  Open windows control panel, open administrative tools, and then open Services.  First check both of these services.

  Remote procedure (RPC) call  This service should show started and startup type must be automatic.

  Windows event log                    This service should show started and startup type must be automatic.

  If you need to change the settings of the two services above, right-click on the service and select Properties.  Select Automatic from the drop-down list and click on apply.  Once finished, click on the Start button to see if the service starts successfully.

  
  

  Task Scheduler                            This service should show started and startup type must be automatic.

  If you have made changes, see if the disk defragmentation utility will now work.

  Let me know if this does not help the issue.

  Kind regards

  DP - K

• Windows 7 Task Scheduler error: the system cannot find the specified file.

  Here is information when you try to change the properties of a task in the Task Scheduler:

  FX: {c7b8fb06-bfe1-4c2e-9217-7a69a95bbac4}

  The system cannot find the specified file. (Exception from HRESULT: 0 x 80070002)

  Type of exception: System.IO.FileNotFoundException

  at Microsoft.Windows.ManagementUI.CombinedControls.INetwork.GetName)

  to Microsoft.Windows.ManagementUI.CombinedControls.UINetwork.GetUINetwork (network INetwork)

  at Microsoft.Windows.ManagementUI.CombinedControls.NetworkListManager.GetNetworkList)

  at Microsoft.Windows.ManagementUI.CombinedControls.ControlTaskConditions.PopulateNetworkComboBox)

  at Microsoft.Windows.ManagementUI.CombinedControls.ControlTaskConditions.InitializeConditions)

  at Microsoft.Windows.ManagementUI.CombinedControls.EditTaskDialog.InitializeView)

  at Microsoft.Windows.ManagementUI.CombinedControls.EditTaskDialog.Initialize (file UITaskFolder, String taskName, String title, UserChoice userAction, BaseResultsControl inOwnerView, String inXmlText)

  at Microsoft.Windows.ManagementUI.CombinedControls.BaseResultsControl.EditTask (UITaskFolder file, String TaskName)

  to System.Windows.Forms.MenuItem.OnClick (ByVal e As EventArgs)

  at System.Windows.Forms.Command.Invoke)

  at System.Windows.Forms.Control.WmCommand (Message & m)

  at System.Windows.Forms.Control.WndProc (Message & m)

  at System.Windows.Forms.ListView.WndProc (Message & m)

  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)

  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Cannot enable Task Scheduler

  I have a HP Pavilion MS227 with Windows 7 Home Premium. Try to activate the Task Scheduler, so I can defragment. When I right click on the Task Scheduler in system, starting services appears not highlighted so I can enable it. I ran antivirus and software anti malware programs with no luck. Any suggestions?

  Hello

  I suggest you ensure that all your Services have the boot by default settings, but you need another computer running Windows 7 64 bit to export the registry data of.

  Another method to do this would be to download the file at the link below (downloads are towards the bottom of the page) and then merge it with your registry as described in the article.  Note:  Generally, it is not a good idea to add registry files downloaded from the internet, but these are good - you can also check the entries that will be merged beforehand uncompressing the file, then open it in Notepad.

  Windows 7 SP1 Services.

  Services of Windows 7.

  When finished, restart the PC.

  Kind regards

  DP - K

• Cannot delete the folder in Task Scheduler

  I had a few problems with the tasks does not Task Scheduler, so I'll try to remove all the tasks that I added and start over.  I managed to delete all tasks and associated files except one.  I deleted the actual task, but when I try to delete the folder, I get a message that I first need to delete all tasks in this folder... but there is no task.  How can I get this folder suppressed?  Thank you.

  dcraw999,
  You have tried this already (but I see not mentioned far)... On the right side of the Task Scheduler is the section actions. Try clicking view, and then click 'Show hidden tasks' and see if makes a task appears under the folder that you want to remove

• Cannot use the Task Scheduler in Windows Vista, you cannot create the MMC snap-in

  I can't use Task Scheduler. When I open it, I get the following message:

  MMC could not create the snap.
  
  MMC could not create the snap. The snap-in may not be installed correctly.

  Name: Task Scheduler

  CLSID: FX: {c7b8fb06-bfe1-4c2e-9217-7a69a95bbac4}

  How can I fix?

  PS: I am running Microsoft Windows Vista 64 - bit (ENU) with Service Pack 2 (SP2) on a HP Pavilion dv5-1199eg Entertainment Notebook PC.

  Hello James-Support Engineer,

  Thanks for the response and support me.

  I received this error for a week about. Yes. Yes.

  I tried your suggestion. The problem was not resolved.

  Problem solved on 08/27/2009 by installing Microsoft Windows 7.

• Cannot find a scheduled task in Task Scheduler

  I just do a new task using Task Scheduler in Windows 7.
  When I did, I searched in the Task Scheduler program and noticed a few things.

  First, there is no "Search" feature in the program of Task Scheduler, that's why I can't understand, it should really be a search function.

  Secondly, there is no task of 'new' or 'custom' folder, I searched through each of these tasks folders and I can't find my job anywhere.

  I want to find it so that I can disable and re-create it for another time, but I can't find the thing.

  Can someone help me out here? I got lost. They don't really make this user friendly program.

  Hello

  Maybe the task was not successfully created. I suggest you to re-create the task and check.

  Schedule a task

  To provide feedback on Task Scheduler in Windows 7, you can visit the following link.

  http://support.Microsoft.com/common/survey.aspx?scid=sw;en-us;2310&altStyle=MFE&renderOption=OverrideDefault&showPage=1&FR=1&nofrbrand=1

  See also,

  Overview of Task Scheduler

• How to get operational Task Scheduler?

  In the event viewer, I can see the next event, which appears after every start.

  Service Task Scheduler doesn't have to launch tasks triggered by starting the computer. Additional data: error value: 2147942402. User action: restart the Task Scheduler service.  (Event ID 412)

  The advice given appear to be invalid, since the Scheduler service has all it's controls in gray.  The service does not appear to be active.

  I'm not abe to say from the message that it is.  This means a particular scheduled task failed?
  Enjoy troubleshooting tips.

  Dave

  Download Process Monitor of
   
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645
   
  Start the program as an administrator (right click and choose Run as administrator).
   
  Set the filter (gout 4 boxes along the top to the bottom)
   

  ProcessName Contains svchost.exe Include

   
  and then click Add. Then set a second filter
   

  Event class is system file include

   
  then click Add then Ok.
   
  Then Options menu - enable Boot Logging will record it at the next startup, until you rerun ProcMon. Try to restart and read the log for file operations failed.
   
  Svchost hosts most of the services, there will be a lot of waste.
   
  After the reboot, tab of the task of Service Manager Appendix a right-click and click go to process. Note the PID. Then add a filter to ProcMon existing filters.
   

  The nest is to include

   
  then click Add then Ok.
   
  Which will limit the display to a few services.
   
  Still a lot of waste but. You cannot sort in ProcMon, but you can file - export to Excel, where you can sort by the column of result. If no excel use the menu Filter - Highlite.
  .
  --

• Task Scheduler gives an error "catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)).

  I run Windows Vista - 64 bit.

  When you open the Task Scheduler, I get 2 exceptions:

  "The task schedule service is not available." The job scheduling will attempt to reconnect to it. »

  and

  "Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)).

  I did basic stuff like the restart Task Scheduler service, restart the computer, etc.. Problem persists.

  Answers are greatly appreciated.

  EDIT: Looking at the services once again, I see that the service is "started" but is more stoppable.

  Hi GosuSheep,

  Follow the methods and check them off below if it solves the problem.

  Method 1:

  Scan the file system (CFS) auditor. This command will launch immediately the Windows File Protection service to scan all protected files and verify their integrity, replace all the files with which it detects a problem.

  Link, please refer to: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  Method 2:

  Run the disk check in Windows Explorer

  a. double-click my computer and then click on the system drive.

  b. click on properties, then Tools.

  c. sous-verification of errors, click check now. A dialog box that shows the check disk options is displayed.

  d. Click to select the automatically fix file system errors check box and then click Start.

  e. If you receive the following message appears, click schedule disk check:

  f. Windows cannot check the drive while it is in use. You want to schedule the disk check to occur the next time that you restart the computer?

  g. restart the computer to start the disk check.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I open Task Scheduler and click on MSE for planning, I get the following warning. General Page initializatin has no 0 x 80070534

  Original title: Task Scheduler

  When I open Task Scheduler and click on MSE for planning, I get the following warning.

  General Initializatin page failed,

  The specific error is:

  0 x 80070534: no mapping between account names and security IDS was done. Year error has occurred trying to retrieve task account informaiton. You can continue to edit the subject of the task, but will not be able to change task account information.

  I then press the ok button and it goes to the task, schedule, and the settings box.

  When I check in scheduled tasks, to see if they ran as planned, the last run time column NEVER said, and the status column indicates

  COULD NOT START.

  In the morning, I always get this error message:

  A task could not run...

  Do you know what I'm doing wrong? Can it be fixed?

  Thank you Tim

  Is there a password the user account in which the task is scheduled?  You cannot schedule a task to run under a user without password account.

  You can also take a look at advanced > view the log window scheduled tasks.

• Windows xp Task Scheduler service does not start

  I have a problem with the Task Scheduler in XP SP3 (home edition) service. The service is configured to start automatically, but hangs during startup and the State is 'starting' permanently In this State, I can't start or stop the service manually.  If I disabled the service completely, restart, put it to manual and click Start, I get the following error:

  Unable to start the task on the local computer Scheduler service
  Error 1053: The service did not demand launch or control in a timely

  I am under an administrator with a password account, so that shouldn't be the problem
  The CPP and the services event log work correctly (Autostart value)

  I need to get this service running in order to allow the read-ahead on this pc. Currently the prefetch folder is totally empty the .ini file is missing as well as all the .pf files. I tried to rebuild the .ini with the help of the > rundll32.exe advapi32.dll, ProcessIdleTasks< command="" at="" the="" command="" prompt="" but="" this="" doesn't="" do="" anything,="" probably="" because="" of="" the="" lack="" of="" the="" scheduler="" service.="" in="" the="" registry,="" enable="" prefetcher="" is="" set="" to="" 3,="" monitoring="" both="" applications="" and="">

  Scheduler tasks and prefetch worked very well - I think that a setting in the registry is damaged or missing. Any suggestions on how to fix this? Thanks in advance.

  It's curious.  The ST journal file must be in the Windows folder.

  I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311
  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  You have to put the downloaded files in the correct folders on your system.

  I don't know where to put the file mstask.ini - windows\system32 maybe?  There is no .ini file in the folder inf. so I don't know and you may need to try different places and keep reading...

  I don't think I've never reinstalled TS (but other things) so I did all the instructions on how to do it, but if the installation stops and asks you for a file, at this point, leave the installation 'wait' and then search your HARD drive for the file he wants to (be sure to include the search for hidden and system files too) and if/when you find return to the installation of waiting and fill the void or navigate to the folder where the installation file is enough (point installation where the file is, so it can find the file he wants to) and continue up to the next point.  You may need to do it for multiple files until you get all the way through it and you will see that some are just not on your HARD drive and you need to download.  You can't cancel the installation and start over every time - just work through a single file at a time by pointing the installation to the folder where the file he needs.

  Maybe later, I reinstall my TS service to practice and be able to understand the files he needs and give some better advice about this.

  Comodo may also interfere (I do not use it, but it's possible).  Did you see if your TS will start with disabled Comodo?

  You should also consider the malware, then you might want to start with this:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Tasks scheduled Windows have stopped lsass.exe 0 x 80090016: keyset does not exist

  I have 6 different tasks in the Task Scheduler in Windows XP.  Each of them is back with "cannot dΘmarrer". They are all worked fine until I put in the last Microsoft Update (which caused my computer to crash).

  When I try to change a scheduled task, I get error 0 x 80090016: keyset does not exist.

  My system essentially depends on the Scheduler (he runs a weather station) and so I would appreciate quick help.

  I'm afraid that this forum has not been much help.  However, I found a solution to:

  http://www.waztech.com/news/news_detail.asp?ID=61

  I performed the procedure as described in the article above. The problem is now resolved and my windows scheduler works again.  This failure was caused by the last Microsoft Update, because it happened immediately after the update.  I wonder if Microsoft will pay attention to this?

• Can not find the task in the Task Scheduler

  I created a fundamental task to connect to an ad - hoc network whenever I boot my laptop with Vista Home Premium 32-bit.  I don't want that to happen and I deleted the network tries to delete the task.  When I open the Task Scheduler, I don't see my task listed.  I made sure 'show hidden tasks '.  I know that the task runs as I continue to receive errors not being to find the ad hoc network.

  I created a new task of fundamental task, called 'test' starts just the calc program and it shows in the list of tasks.

  Any help?

  As others have found, if you change the name of your computer, scheduled tasks that have been associated with a specific user account (like the logon trigger, such as the credentials for the job and so forth) will no longer appear in the list of scheduled tasks. Scheduled tasks displays the message "an error has occurred for task xxxx. Error message: the specified account name is not valid. "The same thing happens if you delete a user account that is named in a scheduled task.
   
  The reason for the problem is that the computer name part of the account name (for example, "mycomputer\myaccount"), and so if a part of the name is not valid, the associated account is no longer recognized. Unfortunately, given that the scheduled tasks will not display the task entry broken, you cannot fix it directly.
   
  The tasks themselves are defined in XML files in plain text stored in \windows\system32\tasks. The files have the same name as their entries in scheduled tasks.
   
  If a task is not desired, you can simply delete the corresponding file from \windows\system32\tasks.
   
  If you want to restore a task, you must change the computer name and/or account name everywhere wherever he is in the job file. But, you can just edit the file in place to solve the problem. Scheduled task detects that the file has been modified externally and even once will not use or display.
   
  I managed to solve the problem by following these steps:

  1. Move the file to the task entry broken of the \windows\system32\tasks in another case. You want to move it, copy it not - file must be put out \windows\system32\tasks. You can do this by using Windows Explorer or move the command in a command prompt window.
  2. Using Notepad, open the file in its new location. Set the name of the computer or the name of the account as it happens and save the file. Repeat steps 1 and 2 for all other tasks of problem.
  3. Open scheduled tasks, or select the menu Action, refresh. It should be no error message now, given that the task of the problem has been removed.
  4. On the Action menu, use the import command to locate the edited file. This will restore the scheduled task.
  5. Test the restored task by opening and then run. Once everything works, you can remove older versions of the file task as you had moved it. Repeat steps 4 and 5 for any other task edited file.

• What is MirageAgent in Task Scheduler?

  What is MirageAgent in... Task Scheduler?

  MirageAgent is configured as a task in my task scheduler as well, as part of the multimedia software of my laptop HP Pavilion dv7.  He launched YCMMirage.exe, which is a background process that monitors if any APs using the virtual driver.  If it detects one, YCMMirage will launch YouCam and YouCam will provide and share the video of webcam at the APs customer.

  can view more information about this process at the following ADDRESS:
  http://www.PACS-portal.co.UK/startup_pages/22000-22999/22266_YCMMirage.exe.htm

• Error opening Task Scheduler: "task image is corrupt or has been tampered with. mcupdate.

  original title: Hello! When I open the task schedule that I get the following error, task image is corrupt or has been tampered with. mcupdate "windows vista home premium SP2" tried various solutions can help.

  cannot say exactly how much time I had this problem when I'm browsing I get windows does not quite agree FAQ

  and when I'm srolling on a website that the page will start to develop until you can't do anything about this page, I have to continualy do right click and update

  After a few seconds, I update again. I use norton 360,6 internet security and norton utilities, I do not know if what I am about to talk about has a prevalence.

  about 2-3 months, I bought Uniblue powersuite, is not thinking that he could not work along side norton360 and utility. I uninstalled Uniblue powersuite:

  as you know that uniblue accelerates, cleans your registry and defragments Tweeks your computer, as well as of other activities.

  I tried windows help and support guide to find a solution, probably do not know what are the things to try.

  can help you.  or it's back to factory reset!

  Hello

  I suggest you perform the steps mentioned in the link.

  task image is corrupt or has been tampered with. mcupdate

  Explorer Windows does not

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Internet Explorer 9 is also compatible with Vista. If youstill would like to Uninstall IE9, follow the steps described in this document.