taskbar and icons in normal mode

Similar Questions

• taskbar and icons take long to load

  When I connect my backround shows, but the taskbar and icons only. If I run the Task Manager, I see explorer.exe is running which I know is what is sopposed to show those. all I can do is wait, and when it finally shows that everything is fine

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest to log on in safe mode then perform a clean boot and see if the problem is resolved. Follow the steps mentioned below.

  Method 1:

  Step 1:

  To start in safe mode, follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Step 2:

  Perform a clean boot, and then connect to the desktop computer and check if the problem is resolved. Follow the steps mentioned in the article below.

  http://support.Microsoft.com/kb/310353

  Method 2:

  I suggest you to check in a new account of user if the problem persists.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Yahoo Messenger opens in safe mode and not in normal mode

  August 10, my flash has crashed when I was with google chrome, then all of a sudden, yahoo Messenger is wobbly. Then thought that yahoo needed to update Messenger, so I checked and of course, there was a newer version. I downloaded and that one point until yesterday if my computer went to sleep while I was connected to yahoo messenger or if I signed up I could not sign in and the purple area remains impossible to click anywhere or even move desktop. Could not only to return with a restart of the computer.  Now it doesn't open in safe mode and not in normal mode.

  I have been in contact with the support of Yahoo messenger and they gave me things to try as Messenger clear cache via the prompt commands, uninstall and reinstallation in Mode safe mode with networking, reset of IE9, check the connection, etc... Yesterday I did all these steps and this time I saw came error window "missing windows component, flash.ocx". I went to Flash via the Control Panel, and of course, my ActiveX went awol. Then I got using IE9.  Instant yahoo Messenger WORKS FINALLY! And I got the smiley face on the login window animation, BUT I can't use it in Mode without failure.  Login window won't be developed in Normal mode.  Is there something I have to toggle to open in Normal Mode?  I have this blue and yellow shield on it. I did the thing of Mr. fixit and there he had set for a few minutes, then she came back.  In the said detailed report something hidden icon got corrupted and something to rebuild the icon cache...
  -Using Windows 7 Home Premium 64-bit

  Hello

  1 are. what fixit you referring?

  2. do you get an error message when you run Yahoo messenger in normal mode?

  Method 1:

  Right click on the Yahoo messenger and select run as administrator.

  Method 2:

  Perform a clean boot and check if you are able to launch Yahoo messenger in normal mode.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 3:

  To rebuild the icon cache, refer to this link.

  Forum FAQ:How to rebuild the icon cache

• Computer automatically starts in safe mode and not in normal mode

  Original title:

  My system is Windows Vista, which is stuck in safe mode.  I tried several to restart in normal mode to have the computer open again in safe mode.  Need help to get out of safe mode and return to normal mode.  Thanks for any help!

  Hello

  1 you get an error message when you start the computer, which leads it in safe mode?
  2. are you aware of any changes made to the computer, before the show?
  Follow these steps and check.
  a. click on Start and then run.
  b. type msconfig in the Open box and click Enter.
  c. click on the Startup tab.
  d. uncheck the box for safe mode.
  e. click on apply and OK.
  I hope this helps.

• Taskbar and icons on Windows Vista disappearing after a certain period of time. Why!

  I noticed that if I leave my PC running for an hour or more unattended (even with my screensaver on and the monitor off), that the icons in the taskbar and the desktop will disappear off the screen when I go back and try to use it.  The only thing I can do is to move my mouse and open some things by right-clicking the mouse, but what is it.  I have no other choice than to make a difficult stop (hold the power button until the PC turns off).  If it helps, my PC is a Dell Inspiron 531 that runs on Windows Vista Home Premium 32 - Bit.  At first, I thought it was a problem caused by Internet Explorer 9 (that I have long eliminated from my PC and thankfully returned IE8), but I was wrong.  In addition, my antivirus program is Norton 360, and I run almost religiously to combat ill will on my PC.  If anyone can help me, I would really appreciate it.

  ADD: Also, after the desktop and the taskbar icons disappear when I try to bring up the Task Manager by pressing Ctrl + Alt + Del, the screen goes black and I can just press ESC to return to the white (except for my desktop wallpaper) desktop computer.  Again, any help will be appreciated.

  Hello

  1 did you changes to the software to the computer before the show?

  Start the computer in safe mode and check if the problem is solved or not. If the problem persists not perform the clean boot.

  Was: start the computer in safe mode.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Start your computer in SafeMode (Windows Vista)

  B: Perform the clean boot

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: perform step 7 to reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Hope that helps.

• DAQmx write (digital) works in mode "highlight execution", and not in normal mode

  Hello!

  I would like to create a simple vi (it will work as a Subvi watchdog in a project) to send TTL 5V 0V 3 seconds 3 seconds, by performing an iteration in a loop.

  Use a card PCI-6703 to that effect (beside that I use for the generation of analog static waveform on several stations). I also have a DAQ USB6212 card, and I have test my digital output with this USB card digital input via MAX.

  The strange thing is that when I run my code in mode "highlight execution", I get what I want: 5V 3 seconds, 3 seconds, 0V, iteration.

  When I try to start it in 'normal' mode, I only see the 5V constantly from the output through my digital entry in MAX.

  I know I'm doing something wrong, but no idea what...

  Please find attached the vi simple.

  Thanks in advance!

  Kind regards

  Your overall loop time is 3 seconds (3000 MS of waiting).  You have a 3 second delay between writing the real and write the value false.  But as soon as the false is written, the loop reminds immediately (the second set of 3 waiting operates in parallel to the writing-Delay-Write sequence) so the real gets drafted immediately after the fake.  It will be just a blip.  So that if you run in the execution of climax, the code goes pretty slowly so that you see the Boolean value False as LabVIEW takes his time data flowing drawing wires.

  Put a delay function after your DAQmx write wrong, as well.

• How leaving the "safe" mode and return to 'Normal' Mode after changing?

  In Microsoft Vista, how to return to the normal mode to work in Mode safe?  I tried to leave by pressing F8 during the restart of the system.  I arrow down to the choice, but he always comes back in Mode safe.  (Story: I just got by technical problems after the installation of a wireless router.)  Everything now works in Safe Mode, but this mode is limited and I want to return to the Normal mode.  Help!

  I just found the answer by accident.  I went to the system configuration and on the 'general' tab, I changed the "Selective startup" selection in NORMAL STARTUP and it worked.  I hope this helps someone!

  KK

• Why my taskbar and icon on my desk blinking?

  This bug started happening for me and I found no solutions on how to fix this. My task bar continues to blink every few minutes as well as the icons on my desktop (I'm not sure how to describe it but it's like it's refreshing himself even with my icons on my desktop it disappears and reappears a second). Also when I move my icons from the original place that they go back to original when my desktop and task bar flicker/blink. I think that this is the reason why my games keep minimizing when im playing in full screen, also while im watching a long youtube video I click on full screen my taskbar and I have to click the chrome icon in my taskbar to disappear. Then after a few minutes it seems once again. Is this some kind of virus? I tried a lot of solutions such as the search for viruses etc and nothing worked her gives me a headache.

  Thanks for the reply. I was unable to perform the specified task.  Had to buy the CD of restoration of the manufacturer.  Problem solved.

• Pavilion P6207c: Hp mediasmart empty icon in the taskbar and icon missing in hp dock

  I restarted my computer and my HP Mediasmart icon in the taskbar is empty, when I click on it windows says it can't open because that its been moved, renamed or deleted. But the show task up if I right click on it like watch a dvd, listen to mp3's, see, modify or download photos, see modify or download videos. (all links in the task too much work) Then trying to understand the problem, that I thought I could basically icon/link to pull a bit of my HP Dock in the taskbar hoping it would be duplicate and appear in the taskbar. But to the contrary after leaving the dock and release the mouse button, it disappeared. How do I trouble the white icon and pick up the other icon in the dock? I pulled the HP Mediasmart icon directory .exe file and it is stuck in the dock, but it works the same. The original had an arrow below and if I clicked it, a drop-down list with all tasks would come down. With that I pulled from the directory that I have to click on it and then a new bar appears with different icons for each task.

  Well I solved the problem with the taskbar, I downloaded the hp mediasmart smartmenu, went into the directory and PIN to the taskbar. But I still can't one of the docking station will work as before.

  @enimen2 ,

  Hi and thanks again for the rear display.  If you can do it is no longer a restoration following options is a complete recovery of the system, return to the original configuration.  You want to back up all your information before you do.  Once it starts it will wipe your system clean.

  Here is a link that will help you to recovery.

  HP computers - performing a recovery of HP (Windows 8) system

  Let me know how things are going.

  Thanks again for posting and have a great day.

• return letters, words, toolbars, and icons of normal size.

  installed the ghost real deal slots. uses the entire screen and the graphics are great. used for a week. my computer froze. I had to use power button to regain control. know all the icons, toolbars, of words, letters and graphics are larger. I uninstalled the program and use the system restore. It did not work. is that what I can do in addition to restoring my computer everything?

  Make your smaller screen
   
   
  3 methods...

  1. set DPI:
  Right-click on a free space of the desktop > customize > column to the left, adjust the size of police (in PPP) > uac prompt > click default scale (96 DPI).

  2. resolution:
  Right-click on a free space of the desktop > personalize > Display Setings > move the cursor to the right. Check your user manual, see if she tells you what resolution is for your computer. My laptop is using 1280 x 800 pixels.

  Here is a table of the guide line:

  
  

  3. do a system restore. Choose the date where your screen is a good size as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  Note: in case the images that appear on your screen are too large for you to implement the methods above, go in Mode safe and run these suggestions.

  Here's how to get safe mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How can I find my files and icons to normal.

  I have trried to install a game and it has messed up my size & resolution.  I have unintalled it and then I tried a system restore.  None of the restore points will not work.  I restored the resolution, but the size of everything is still great as it was.

  Hello

  Please ask you question in the Microsoft Community!

  From the description of your post, I see that your screen resolution changed after installing a game.

  A small question:

  What happens when you do a system restore? What is the error message?

  It could be a problem with the display drivers.

  We will uninstall and reinstall the latest version of display drivers from the manufacturer site and check the result.

  See this link for more information on "How to manage devices in Windows XP".

  http://support.Microsoft.com/kb/283658

  I hope that helps!

  If the problem persists, or you need help on Windows please keep us informed. We will be happy to help you!

• The history of my file fails on windows 8. I get the window from the history of the file, but when I try to turn it on, my taskbar and icons disappear. I can't activate it. How to make historic return of the files?

  Original title: the story of my file...

  The history of my file fails on windows 8.

  Hello

  Thanks for the reply.

  Please let us know that if you need help with questions related to Windows, we're here to help.

• When Facebook, I can't click on "View all comments" unless in safe mode. Yet, when I am in normal mode and turn off everything, it still doesn't!

  When Facebook, by clicking on "View all comments" only works in safe mode. And yet, in normal mode, disabling all does not help. Why?

  URL of affected sites

  http://Facebook.com

  Nothing does seem strange. Try to clear your cache and cookies.

  1. Open the Tools menu, then select clear recent history...
  2. In the time range to clear: drop-down menu, select all.
  3. Click the arrow next to Details to display the list of items that can be cleared.
  4. Select Cookies and Cache.
  5. Click clear now.

• Windows 7 freezes in Normal Mode.

  Hello! I use my Dell Inspiron 17R about 2 months ago and this is a fantastic phone, I use it mainly for video games, music and Movies/TV shows and he ran without fault far.

  Yesterday, however, the problems began to occur. I could boot up the laptop as usual and access the Internet, play games, watch movies etc, but after about 5 minutes everything would suddenly become unresponsive. Both my mouse and trackpad do not allow me to click at all, however I could move the mouse around the screen quite well. The keyboard would not work also - I tried to open the Task Manager via Ctrl + Alt + Del but also closing windows with Alt + F4 or by train at the stop via the Windows key and nothing would work. Instead, the cursor would change to the "loading" symbol and it would pretty much just doing nothing.
  The first time that this happened, I was browsing the Internet and it comes if is stuck on "Waiting for Cache" or something so that probability, I then noticed the circle of rotation which shows a page loading also stopped and was then forced to manually restart because I couldn't even click on the Windows button. Another test I tried watching a video uploaded - it literally just stopped playing about 4 minutes. The screen is just stopped on a single image even if the pause button had not been pressed - try clicking on what anyone did not work (as usual).
  I tried to restart it several times (I unfortunately had to use the power button) and he began to repeat each time. It would work for a few minutes before freezing completely (less opportunity to unnecessarily move the mouse around the screen). Sometimes a pop-up window would be above the bar saying that stains the 'Microsoft Windows application became unresponsive. Sometimes the taskbar then disappear and the laptop would be closed, but the end result is always the same.
  I found that the same problem moved with the boot safe mode with networking, however there were a few noticeable slowdown. I downloaded and used many anti-viruses/malware to analyze my machine and I'm almost certain that there is nothing of the those on the computer (although in fairness, the scans have been so slow I could do before giving up only to about 20% on each). Other solutions, I tried included:
  1. manually end tasks of high memory use via the Manager of
  2. with the help of CCleaner for fix my registry in Mode safe
  3. left the laptop shut down during the night in hope it would just set
  4 disconnected everything from the laptop ports
  5. rebooted via the reboot, shutdown and power buttons
  I'm sure I tried other things as well, but I am quite limited in the fact that I can use the laptop for a few minutes before he decided to stop working. I really need the laptop for my studies and I would be absolutely in love if one of you could help me solve my problem.
  Thanks in advance!
  -Jordan
   
  Original title: error: after about 5 minutes of work after booting, Windows 7 freezes completely

  Hi JordanRidehalgh,

   

  Thanks for posting in the Microsoft Community. It seems that you have a problem with Windows 7 gel. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team to get this number fixed.

   

  We start with a few questions-

  (1) that you get an error message or error code?

  (2) did you install hardware or software on the computer before the show?

  I would like more information about the issue.

   

  Method 1-

  I wish that you run anti-virus in Mode safe mode with networking using different antivirus software.

  In addition, I'd download (download and install in Normal Mode) and execution (in Safe Mode) the online scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The antivirus will try to repair bad sectors on the hard drive damaged by viruses. All the data on these sectors may be lost.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Make sure you get the computer back to Normal Mode after performing all the troubleshooting steps.

  Method 2-

  It is possible that a third-party application is causing the problem as the computer worked well in Mode without failure.

   

  I recommend you perform the clean boot.
  
  Placing the computer in a boot minimum state helps determine if third-party applications or startup items are causing the problem. You must perform the steps in the article-
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: You must follow the step 3 of the article to return the computer to a Normal startup after you perform all the troubleshooting steps.

   

  Check if the problem persists.

   

  Method 3-

  I would have you look at the article-

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286?WA=wsignin1.0#method52

  Note: The antivirus will try to repair bad sectors on the hard drive damaged by viruses. All the data on these sectors may be lost.

   

  We know if you need help. We will be happy to help you.

   

  Thank you.

• When I turned on my computer back from the mode 'sleep' this morning, all my fonts and icons on the desktop were very large and I tried to get back them to normal with no luck.

  I tried to create a system restore point, tried to change the resolution, tried the small button of magnification, but nothing works.  It worked fine last night before going to sleep... ideas?

  You can create a Restore Point for yesterday not today.

  It's already done, if you have enabled the restoration of the system.

  Follow the steps below to use one already do the System Restore Point to restore your computer to the settings of yesterday...

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the Web site of the manufacturer of your card for laptop / computer graphics / > drivers and downloads Section > key in your model number > looking for the latest graphics drivers for Vista > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner