TASKBAR WITH THE SECOND MONITOR

Similar Questions

• iMac 27 "with the second monitor boots black with cursor

  I can't seem to find another discussion altogether as my problem starting special 'black screen ':

  New iMac 27 "retina 5K (end of 2015) running OS X El Capitan 10.11.3 with second monitor Samsung connected by Mini DP - DVI.  When starting, the two screens are displayed in black, but the cursor is available and can be moved.

  I have to make a hard stop and disconnect the second monitor to start at the login screen. Then I can reconnect the monitor and everything works.

  Any suggestions for a fix?

  So, I spent some time with Apple customer support. Several of the standard troubleshooting for problems of mystery, they came to the conclusion that there was an incompatibility of driver with the Samsung monitor at startup which is mucking things up, and I just have to accept starting with the second disconnected monitor then plug it in again after a successful login.

  Samsung does not write the monitor for Mac drivers (for some reason any), that's why the customer support figures that there is a hangup at startup. But why OS X recognize the monitor and run fine otherwise? Why only hang at boot time? And why my Mac Book Pro 2007 running the same version of El Capitan boot fine with the connected monitor? It has something to do with the Thunderbolt/mini-DP-to-DVI connection? I don't know, and I guess that Apple's Support is not either.

  I fell on a hack, which is as follows:

  1. start with the second monitor connected

  2. in the "black screen with cursor" hold the power button quite long to put the computer to sleep

  3 wake up the computer with the keyboard or trackpad or other

  4 and now the login screen will appear.

  5 log in as usual.

  6.

  I hope this helps someone. One day I'll get a more compatible monitor and it will not be a Samsung.

  They make nice dish, however.

• HP 15-r011dx noteboo9: no audio when with the second monitor attached and Extend mode, duplicate or second screen only

  When I attached a second monitor via a HDMI cable and try to use the duplicate, extend or second screen display modes only, I can get the video to view and run but I get no audio unless I put the laptop display settings to p / only mode.  I really want to use the second screen for PowerPoint/Presenter and play a video (with sound).  Even if I try to play a video on YouTube, I can't get audio only mode p / screen.  Any help would be greatly appreciated.  Thank you.

  Hello

  Please disable the HDMI to force audio to the laptop or use different such as VGA or DVI conection. To hell with its HDMI, please click right "speaker" icon > playback devices > right click and disable the HDMI sound.

  Kind regards.

• Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

  There are a few threads describing problems with two monitors, but I have not found a match.

  I like for the operating system ask login password once the lid is closed, no matter how much time has passed (even for a moment). Also, I work with a dual monitor. However, when my macbook is plugged into the monitor and I close the lid, the macbook don't disconnect but spends just primary monitors. Understand that this could be a feature and not a bug, I tried to unplug the monitor before closing the lid. But the OS seems not to realize that the monitor has been disconnected, and when I close the lid he didn't ask me for my password once that I reopen it. Does it also if I wait a bit (i.e. one minute) after disconnecting the monitor, but not if I wait a while (or 15 minutes), well that I've not enough highlighted how long is necessary so that it starts locking on my closing the lid. He does it with different monitors, so I doubt that it depends on the particular monitor. In both cases, I used the HDMI port.

  This is quite annoying, because I need to be able to disconnect safely in a short period of time, and I was not able to find a workaround on mine. Everyone knows this? Thank you for any help or advice.

  Emilio

  You might have invoked indevrtantly this obscure 'functionality' of MacOS. Read the article and see if you do these things:

  Use your Mac laptop to view closed with an external display - Apple Support

  .

• Lightroom CC crashes when you use the second monitor

  I use Lightroom CC on a core 6 2010 Mac Pro with 24 GB of RAM and the application running on an SSD with OS10.9.5.

  Until the other day, I've been using Lightroom 5.7.

  I have two NEC 24 "monitors connected to my computer.

  I paid about $1,000 for each, and I was happy with their color rendering and performance.

  In the last two weeks, I had repeatedly when Lightroom stops working.

  Usually after using edit in Photoshop command, or creating a web gallery, once the order has been issued, LR will go to one screen and frozen at this time, most of the controls does not work. Then I have to select exit from the menu and reopen the application. Needless to say it's a lousy way to work.

  Tonight, I discovered that if I run Lightroom on a monitor, the gel that happens after having a web gallery, or help edit in Photoshop, does not happen. However, if I start with just one monitor, use edit in Photoshop, then click to use my second monitor, then frost.

  Having 2 monitors is very useful, so having to limit myself to 1 monitor is pretty disappointing, not to mention a waste of investment.

  I've been using Lightroom 5 long on this system without these problems.

  I installed Lightroom CC as a way to solve my problem.

  But there is the same problem with it.

  I thought about updating the operating system to 10.11, but I expect to do.

  I've read of people having problems with OS 10.11 (El Capitan), and I need to upgrade backup software, if I switch to 10.11.

  It seems to me that there may be some type of bug or problem with Lightroom and the Mac OS when it comes to use 2 monitors.

  Everyone knows this freeze or lock up Lightroom?

  Has anyone else had him freezes related to the use of two monitors?

  Can anyone suggest a solution?

  A Mac savvy friend suggested that I create a new user account to see if the problem of gel with the second monitor would also with a new user account.

  I created a new user account, and Lightroom works fine.

  Then, I had to migrate all the settings for the various programs to the new user.

  I also decided to improve the operating system of 10.9 Mavericks at El Captian, 10.11.

  I also changed 5.7 Lightroom at Lightroom CC 2015.

  All these computing has taken a lot of time, but now everything works fine.

• Problem with the icons on the second monitor

  Original title: I had the image of the desktop without icons, when I added another monitor, but can not get the screen of the laptop to display on the screen 2 real. I have enable VGA on media center edition XP

  I had the image of the desktop without icons, when I added another monitor, but can not get the screen of the laptop to display on the screen 2 real. I activated the VGA on the media center XP edition

  Hello

  If I understand the question, you have a problem with icons on the second monitor.

  Please let me know if this is not correct. You have reached the right forum for your question. We are here to help solve your problem and guide you in the right direction.

  I suggest you try the procedure described in the article and see if it helps.

  How to configure and use multiple monitors in Windows XP
  http://support.Microsoft.com/kb/307873

  You can check the link for more information:

  Setting up dual monitor: two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=jiVGYS2SKfo

  Please let me know if this is not correct. You have reached the right forum for your question. We are here to help solve your problem and guide you in the right direction.

• The second monitor connected to the Satellite Pro A100 "disconnect" himself

  Hello

  I use my laptop - Satellite Pro A100 (PSAACE) - with a second monitor with no problems until I did an upgrade to Windows Vista. After installation, the second monitor starts to show problems, i.e. that works intermittedly. Every 5 seconds or so the monitor "unplug" itelf and caps again. I hear the (UN) plug sound when she did this and the two displays flickers during this period.

  Can someone suggest a solution to this problem?

  Concerning

  I put t know what can be the problem but it sounds like the connection problem. Make sure that the monitor is connected correctly. Also try to test it with another external monitor. Is perhaps the cable or connector defective.

• Satellite 1130-Z31: impossible to get 1600 x 900 on the second monitor

  I have a Toshiba Satellite 1130-Z31 (an old, but everything works well).

  Now, I have attached a second monitor with a native resolution of 1600 x 900 pixels.

  I put the second screen resolution to 1600 x 900, it is accepted.

  However, the image on the second monitor is ugly, and the external monitor´s what OSD says it gets 1440 x 900 pixel laptop computer signals.

  It seems that Toshiba sends an image with a lower resolution on the whole.

  I installed the latest graphic driver - no change.

  Or would it be a problem with a bad quality VGA cable or almost?

  Any ideas?

  Thank you
  Turtle

  Hello

  Unfortunately, I wasn't able to find the info which resolutions are supported for external screens, but if you can't get 1600 x 900 pixels which means that this resolution is not supported by the graphics card.

  What video port are you using? VGA 15 pins port maybe?

• Application that was open on the second monitor does not open on the main screen without the second monitor attached

  At my office, I have a second monitor. One of my apps has been posted on this subject. I think I left the application; disconnected the monitor; and stop Windows XP.

  Now, my application wants to open on the second monitor which is not present.

  Is it possible to open the laptop monitor? Charles Allen Managing Consultant BKD Technologies

  Start the application, right click of its mosaic in the taskbar and click move .  Use the arrow keys to move to the first monitor, and then press enter .

• No video on the second monitor (DLP projector) in PowerPoint 2003 presentation mode.

  When you use PowerPoint 2003 in presenter view, videos will not play on the second monitor which is a DLP projector. Video plays and produces the sound, but no picture. Videos play fine in clone mode. Using Dell Latitude D820 and windows XP pro

  For questions of PowerPoint:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-AU/Office/default.aspx?tab=2#tab=5

  PowerPoint Help Forums at the link above.

  They will help you with your questions PowerPoint when repost you in the Office Forums above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• No signal on the second monitor

  Until a few days ago I was using my VGA cable with my second monitor without problem now it doesn't seem to work. When I plug the screen, the laptop detects the monitor and automatically and goes into presentation mode the monitor also detects the computer laptop, but for some reason it shows no signal. I know that there is nothing wrong with the cable itself as I tried it on another computer. I also tried to adjust the display settings and nothing seems to work. Does anyone know any other way to solve this problem?

  Also, if it helps, my display driver is NVIDIA GeForce7000M/nforce610m

  Try to connect the monitor, and then restart the computer.

  If it does not try to reconnect the screen: right click on the desktop-> personalization-> on the left pane, click on "Windows Mobility Center" - click on the "external Display" tile on the button 'Connect display' even though it says "connected screen. It should detect the monitor.

  Or press the hotkey on your mobile PC that turns on an additional display. The function (FN) FN + F5 keyboard shortcut is used for this purpose on many laptops on some, it is the FN + F4 key. Find the F key that has an image from monitor.

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

• Vista don't forget display settings; move the second monitor from top right.

  Windows Vista is often (not always) forgotten my display settings for my external monitor.

  I have a Dell XPS M1530 laptop with a NVIDIA GeForce 8600 M GT graphics card.  The laptop is running Vista Home Premium SP2 with all updates applied.  I have a Samsung LCD monitor mounted on the wall above the laptop screen that I use as a second monitor (driven by the output of the laptop).

  I updated the display settings so that my second screen is located above my main monitor. My problem is that Vista often forget this parameter after the standby or hibernation, and returns the value by default display settings of 'second monitor is to the right of the primary monitor'.  This means that I often walk in the display settings to do the right thing (pardon the pun).

  I've seen other messages to try to use 'View to connect' in the settings of Windows Mobile (win - X).  However this option only supports a second monitor is located on the left or the right of the main screen - not on it.

  Any suggestions before I have eventually give up and drill several holes in the wall to mount the external monitor to the right of the screen of my laptop?

  Thank you.

  In my case out of sleep the primary monitor (laptop) is off (still asleep) while the second monitor is on but the resolution is that the screen of the laptop and he took the position of the main monitor. I push the "fn" + 'f4' key to switch between monitors, laptop monitor turns on but the secondary display stands. Another pressure on the keys cause the laptop monitor to be shared and the secondary monitor is now on, that's what toggle keys do. On the third time that the keys have pushed the two monitors came the resolutions they were Setup.

  Try using the ToggleKeys. On some laptops the 'f' key to toggle is "" f5"key. My 'f4' key has the image of two monitors.

  I hope I could help

• U2414H, Dual, laptop, Windows 10, Nvidia GTX 960 M, no STDS to the second monitor?

  Hi all

  I hope that I have included all relevant information in the present, but ask if I missed something. I bought two of the screens U2414H and a Windows 10 laptop computer powered by GTX 960 M with HDMI and Mini DP ports. My goal was to be able to the Garland of the whole U2414H screens so I could use my laptop out and about, and when connection back to the monitors of would have to plug in a cable and get two screens. In theory, but...

  I followed the instructions and using two Mini-DP to DP cables, connected the mini laptop RFP RFP on the first screen. DP on this same screen highlights Mini DP on the second monitor. I activated the DisplayPort 1.2 on both of these screens. I can't get any signal on the second monitor, it boils down to the power saving mode.

  Otherwise, I decided I would try using two cables and ditch the idea of DP STD I can at least use the two screens. So I have laptop HDMI to a screen and the MiniDP to another, and therefore, that alone will never work at a time. Individually, they work very well, both with HDMI or DP. But the two connection fails every time. When I tried to connect a display of alternative supporting HDMI as the second, which works very well.

  So I had an autour reading and it seems that it is common to have problems of connectivity to these screens. This brings me well on my two questions:

  (1) is there something that would work?

  (2) assuming that there is nothing that works, Dell can swap these screens for two that will achieve what I need?

  Thank you

  Dave

  In MST, DP 1.2 should be turned off (disabled) on the second monitor.

  Laptop AMD on--> U2414H CDM to cable DP--> DP U2414H #1 in (DP 1.2 enabled) (Port #3 in the image)

  
  #1 U2414H (Port #5 in photo) DP--> DP U2414H CDM cable--> 2 # U2414H CDM in (DP 1.2 disabled) (Port #4 in photo)

  When you use only no STDS, is the lid of the laptop open all trying to run two monitors of U2414H? This laptop can even run three screens, laptop LCD + 1 # U2414H + 2 # U2414H?

• Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor

  The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor

  I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.

  The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.

  I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.

  What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.

  I'm talking about a window similar to this one
   
  http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG

  Try changing the backup.ini

  you find it in

  .. \Program files (x86)\MozBackup\backup.ini

  Open the file backup.ini with editor

  Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights

  Change the value of "1": monitor

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =1

  '2' or whatever the value of your primary monitor is:

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =2

  System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.

• Disable the second monitor Windows 7

  How can I disable second monitor in windows 7.  I want the computer to a monitor, so I can use the second monitor to my new computer.

  Thank you.

  Hello

  You can remove the physical connections of the external screen and then check.
  Follow the steps and then check.

  Method 1

  Check if the monitor is present.

  a.Click start.

  transfer type of search box to adjust the screen resolution

  Method 2

  You can read the article and see if it helps.
  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  See also:
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors