TBird 38.2.0 freezes when dell e5550 wakes up from sleep

Similar Questions

• MacBook pro freezes for 5-10 minutes everytime I wake up from sleep mode?

  Since the upgrade to Yosemite, my macbook pro goes to the loading screen grey which usually appears when opening my laptop after that he almost dies everytime I wake up from sleep mode. It freezes on this screen for a few moments, and then when I get to my normal screen, it continues to remain frozen for an extra few minutes. The mouse will not work until a "Set up Bluetooth keyboard" menu appears, then disappears. The problem has persisted through several software updates. I searched endless forums and topics, but none seem to match my problem. Can anyone help?

  Data sheet:

  OS X Version 10.10.1 Yosemite

  MacBook Pro (15-inch, mid-2012)

  2.3 GHz Intel Core i7 processor

  16 GB 1600 MHz DDR3 memory

  Free to 318,84 GB 107,02 GB

  I had the same situation; started during the upgrade to Yosemite, continued with El Capitan. I tried a n y t h i n g for a few months, revisiting the forums etc. The message in the system log, leaving the "driver GPU seems to be suspended. Does my Mac Pro completely unworkable. It was a software problem because it does not occur in safe mode. Now I just went down to the Mavericks and the problem is completely resolved. I can use my computer again.

• Thunderbird freezes when Windows 10 fate of mode 'sleep'. SOLVED by disabling lightning, provider for Google Calendar and calendar Tweak

  Since the update of Windows 7 Windows 10, Thunderbird has acted erratically. At random times, he keeps checking for new messages. If I then try to manually check for mail, it freezes. He meets some menu commands, but by clicking anywhere in the components (list the mailboxes), the list of messages, etc. does nothing. Sometimes, it opens a white notification window, which I can only get rid of kill it with Task Manager. More often, if I just close Thunderbird and start it again, it starts working normally again... For a period of time. The problem seems to happen most often when I turn Windows off mode 'sleep', but

  I'm currently under Thunderbird 38.2.0.

  I tried to disable some add-ons that I wasn't really using. I'll see if that helps. I saw that he suggested that users with similar problems running Thunderbird with all disabled add-ons, but I also saw that it said that it is really only a temporary fix rather than a real solution and I agree. List of enabled extensions:

  Add-on Compatibility Reporter 1.1.1
  The Update Checker 2.13 module
  Check compatibility 1.3.1
  Compact header 2.1.0
  Mark all as read button 0.7.1
  Reduce to a minimum at Lac revived 1.1.2.1

  Any other suggestions? Anyone else having the same problem? I saw a few others with Windows 10 problems, but nothing quite matched mine.

  Thanks for the help. Until now, deactivation of lightning, provider for Google Calendar and calendar Tweaks seems to have solved the problem. If it begins to freeze again, I'll do Mode without fail a test.

• Skype freezes when I make a call from the 6.0 versions

  I need help, my Skype on my pc freezes when I try to close Skype. I need help because I talk through Skype to friends I play with.

  I suggest to update the following drivers to see if anything changes:

  Latest AMD generic display drivers
  http://www2.ATI.com/drivers/14-4-Win7-WIN8-WIN8.1-64-DD-CCC-WHQL.exe

  Latest drivers for generic Intel HD display (3000) *.
  http://downloadmirror.Intel.com/23764/A08/win64_152822.zip

  Provided Setup.exe cannot install. If this is the case, you must install them manually by navigating to the graphics drivers in the package. Intel has even done a FAQ on this type of procedure. http://www.Intel.com/support/graphics/sb/CS-033916.htm

  Last Realtek generic drivers audio - High Definition Audio codecs (software) - 64 - bit driver Vista/7/8/8.1
  http://www.Realtek.com/downloads/

• iMac late 2013 10.11 OS crashes when you wake up from sleep

  10.11.4 OS iMac late 2013

  Sometimes freezes upon awakening from sleep. Symptoms include:

  • Black screen with a mobile mouse
  • A blank desktop (no icon) when using expose function
  • Deterioration of the function so that the machine does not respond with the exception of a mobile mouse cursor
  • After a hard reboot forced, commissioning several times with a prohibition sign
  • I reinstalled the operating system
  • Run firstaid
  • Run the diagnostic mac

  Only console records until the machine sleeps and is empty while crashing. This is a recent journal in the moment before he slept, rose and crashed.

  28/03/16 3:59:57.578 PM Google Chrome support [823]: CGAffineTransformInvert: singular matrix.

  28/03/16 4:00:23.300 PM awacsd [182]: InnerStore GetWakeInfoForZone: no external port for 1301249226.members.btmm.icloud.com.

  28/03/16 4:00:23.954 PM awacsd [182]: InnerStore GetWakeInfoForZone: no external port for 1301249226.members.btmm.icloud.com.

  28/03/16 4:00:23.961 PM awacsd [182]: InnerStore GetWakeInfoForZone: no external port for 1301249226.members.btmm.icloud.com.

  28/03/16 4:00:43.543 PM TogglDesktop [372]: receiveSleepNote: NSWorkspaceWillSleepNotification

  28/03/16 4:00:43.543 PM AirPlayUIAgent [339]: 2016-03-28 04:00:43.543054 PM [AirPlayUIAgent] BecomingInactive: NSWorkspaceWillSleepNotification

  28/03/16 4:00:43.543 PM CrashPlan menu bar [466]: * WE ARE __NOT__ CONNECTED *.

  28/03/16 4:00:43.544 PM CommCenter [276]: CSI telling to go to low power.

  28/03/16 4:00:43.549 PM sharingd [293]: 16:00:43.548: scan BTLE turned off

  28/03/16 4:00:44.534 PM WindowServer [183]: device_generate_desktop_screenshot: authw 0x0 (0), shield 0x7fdfb4313c00 (2001)

  28/03/16 4:00:44.605 PM WindowServer [183]: device_generate_lock_screen_screenshot: authw 0x0 (0) [inf, inf, 0, 0] shield 0x7fdfb4313c00 (2001), dev [2560,1440]

  28/03/16 4:00:44.644 PM identityservicesd [298]: IMMacNotificationCenterManager: 0x7ff2dd324b20 >: Observer of notification: notification com.apple.iChat: __CFNotification 0x7ff2dd12c390 {name = _NSDoNotDisturbEnabledNotification}

  28/03/16 4:00:44.644 PM image [340]: IMMacNotificationCenterManager: 0x7fe273b02340 >: Observer of notification: notification com.apple.FaceTime: __CFNotification 0x7fe271419b20 {name = _NSDoNotDisturbEnabledNotification}

  28/03/16 4:00:44.662 PM identityservicesd [298]: IMMacNotificationCenterManager: 0x7ff2dd324b20 >: NC disabled: NO

  28/03/16 4:00:44.662 PM image [340]: IMMacNotificationCenterManager: 0x7fe273b02340 >: NC disabled: NO

  28/03/16 4:00:44.662 PM sharingd [293]: 16:00:44.662: purged hashes contact

  28/03/16 4:00:44.663 PM sharingd [293]: 16:00:44.662: discoverable mode changed to Off

  28/03/16 4:00:44.663 PM sharingd [293]: 16:00:44.662: Scan stopped BTLE

  28/03/16 4:00:44.671 PM identityservicesd [298]: IMMacNotificationCenterManager: 0x7ff2dd324b20 >: DND enabled: YES

  28/03/16 4:00:44.671 PM image [340]: IMMacNotificationCenterManager: 0x7fe273b02340 >: DND enabled: YES

  28/03/16 4:00:44.671 PM image [340]: IMMacNotificationCenterManager: 0x7fe273b02340 >: update enabled: No. (subjects: ())

  ))

  28/03/16 4:00:44.671 PM identityservicesd [298]: IMMacNotificationCenterManager: 0x7ff2dd324b20 >: update enabled: No. (subjects: ())

  ))

  28/03/16 4:00:58.679 PM powerd [53]: BUG in libdispatch: 15E65 - 1718 - 0x0

  28/03/16 4:00:58.000 PM kernel [0]: ARPT: 4948.045748: wl0: TCPKEEP: locate_keepalive_data_new_uc: No. IPV4 base10, keepalive has not begun.

  28/03/16 4:00:58.000 PM kernel [0]: ARPT: 4948.045757: wl0: MDNS: IPV4 address: 10.0.1.9

  28/03/16 4:00:58.000 PM kernel [0]: ARPT: 4948.045762: wl0: MDNS: IPV6 Addr: fe80:0:0:0:8 has 63: dfff:feb4:10 c 3

  28/03/16 4:00:58.000 PM kernel [0]: ARPT: 4948.045767: wl0: MDNS: IPV6 Addr: fdb5:4267:2f7:1:8 has 63: dfff:feb4:10 c 3

  28/03/16 4:00:58.000 PM kernel [0]: ARPT: 4948.045772: wl0: MDNS: IPV6 Addr: fdb5:4267:2f7:1:895's: bd12:2d8c:adf1

  28/03/16 4:00:58.000 PM kernel [0]: ARPT: 4948.045777: wl0: MDNS: 0 SRV REB, 0 REB TXT

  28/03/16 4:00:58.000 PM kernel [0]: IOCTL unrecognized: 234 on 236

  28/03/16 4:01:01.000 PM kernel [0]: PM response has taken ms 3227 (53, powerd)

  28/03/16 4:01:01.000 PM kernel [0]: kern_open_file_for_direct_io (0)

  28/03/16 4:01:01.000 PM kernel [0]: kern_open_file_for_direct_io took 18 ms

  28/03/16 4:01:01.000 PM kernel [0]: open /var/log/SleepWakeStacks.bin file, size 172032, extensions 2 ssd maxio 2000000 1

  28/03/16 4:01:01.000 PM kernel [0]: surveyed major file 1, minor 0, 4096 blocksize, pollers 5

  28/03/16 4:01:01.000 PM kernel [0]: ARPT: 4951.192049: AirPort_Brcm43xx::powerChange: sleep system

  What 'event' immediately prior to the onset of this bad behavior? Update/update OS X or other software? Adding hardware (devices)? Nothing at all.

• Since the last update, windows Explorer (start bar, windows, etc.) won't start when you wake up from sleep.

  17/09/2012

  Since the last automatic update, my laptop won't automatically sleep when the lid is closed. And when opened the lid of his sleep, there is no current windows; No start bar, no application. So all I can do is ctrl alt del or start L so I can restart my laptop.

  I think that the last update caused this, since there was no prior dysfunction. .

  popular considerations. .

  JLL

  Notice: I discovered that the problem was not caused by updates, but by instant replay. Disregard this message...

  Thank you.

• Alienbware X51R3 with S2716DG from Dell doesn't wake up from sleep mode

  I recently bought a new Alienware X51R3 and Dell S2716DG Monitor. The PC happened a few weeks earlier from the monitor, and the system worked very well (and wake up from his sleep normally) on the old monitor.

  After setting the new monitor (executed in a single monitor configuration) on the display port, the PC is no longer waking up from his sleep. I tried to update the driver for the monitor and turning off the monitor 'Deep sleep' works without success.

  It worked fine with the previous monitor so I think that the monitor is most likely the culprit but haven't found a solution or work around yet. Power off the PC everytime I walk away from it or disabling sleep seems completely unnecessary.

  The Dell Support program help hard locks - the PC every time I launch...

  After a little violin, I was able to adjust the settings for PCI Express Link State Power Management from the command line with:

  powercfg 381b4222-f694-41f0-9685-ff5bb260df2e 501a4d13-42af-4429-9fd1-a8218c268e20 ee12f906-d277-404b-b6da-e5fa1a576df5 0

  Will test the sleep options and report.

• SVT131A11 falls frequently wireless connectivity when it wakes up from sleep

  My laptop almost everytime I wake up from its sleep, it immediately connects to my network wireless, but not a few mouse clicks on the browser, it disconnects from the network. Sometimes it takes several trys to get it reconnected to WAN. Once he logs in again, all right.  Any ideas? Thank you

  Hello Jim,

  Thanks for the post.

  Install if there is an update available for your computer on the issue. You can check the updates by putting exactly the model of your computer, here: http://esupport.sony.com/

  Then, try to do all the steps mentioned below:

  Click on the Start button and then click Control Panel.

  In the Control Panel window, click System and Maintenance.

  In the Power Options window, click Power Options.

  In a window of the plan of power under the current power plan that is selected, select it click on change plan settings.

  In the Edit Plan settings window, click on change advanced power settings.

  In the Options window to power, under the Advanced Settings tab, click the plus (+) sign next to the wireless adapter settings to extend the selection.

  During the selection of the wireless adapter settings, click the plus (+) sign next to the power saving Mode.

  During the selection of the power saving Mode, click battery.

  Tails: click on the arrow pointing downwards, and then click to select Maximum Performance.

  Repeat steps 7 through 9 for the blockage in: parameter.

  Click the OK button.

  NOTE: When one option other than the maximum Performance is selected, the WIFI connection may fail.

  Kind regards

  Miguel

• TestStand 2014 freezes when I select a path from the project during an Action LabVIEW using LabVIEW TERM 2014

  In the company that I work, we have a solution that uses the two TestStand 2014 and 2014 LabVIEW.

  We work with the development version of the two, but we are deploying our automation using TestStand and Labview Runtime engine 2014.

  We tried to deploy a new station, but during the analysis of our project, the User Interface for Teststand (version Deploy) froze.

  I tried several things and decided to install a full version of TestStand 2014 and 2014 LabVIEW to try to debug the problem.

  What I've discovered is that when I create a new sequence in TestStand, add a VI Action and try to load the path to the project, the TestStand freezes if I use the adapter Runtime.

  If I go to the LabVIEW development system adapter in TestStand, it works. However, I need to use the Runtime since it's free while the LabVIEW Development is paid.

  We already use our solution in other places, and this is the first time, it never happened. The only post I found online that had something to do with this issue is this.

  If I remove the path of the project and call the VI himself, as "dvu", said in his second post, it works.

  However, it is something not good to do in our automation together, since we have several calls from LabVIEW.

  Any ideas on how to do this only works with 2014 DURATION and 2014 Runtime LabVIEW TestStand?

  Thank you!

  Thanks a lot Stop_Luke_and_Listen, but the guy where the deployment was made called the support NEITHER and they couldn't find the problem, so they formatted the PC.

  Now it works very well, so I won't be able to generate the report. It would have been a great idea.

  Thank you!

  SOLUTION: Format the PC and reinstall.

• Satellite U300 cargo stops when wake up from sleep mode

  My U300 has some issues loading. If I connect the charger mode 'sleep', then wake up the laptop it stops in charge, even if the adapter is still plugged. The battery icon says he's in charge, but the percentage of the battery decreases. And there is no warning when it hits empty, he just cut.

  I think there also the same when I'm in charge it execution state and then switch to hibernation. It does not seem to pay even if the adapter is still plugged.

  To be honest I never noticed similar problems with my laptop
  It seems very strange and here in the forum, we could provide only a few suggestions

  So first of all, it would be desirable to update the BIOS. The update of the BIOS sometimes makes wonders ;)

  What in the Vista update? Do you still run the update of the OS?
  From my experience, Microsoft publishes a lot of hofixes and fixes which corrects several different problems

  Last but not least, we should not exclude a hardware problem.
  In this case, the latter would be the ASP!

• What to download to fix "" Stop error message on a Windows Vista-based or a Windows Server 2008-based computer when you resume the system from sleep mode: Stop 0x000000FE ""

  I don't know what patch to download to fix this problem! Help?

  It is problem KB967102 code

  http://support.Microsoft.com/kb/967102

  Click on the link "view and request hotfix downloads ', select the platform (x 86 when you use a 32-bit Windows) or x 64 when sue you a 64-bit WIndows and type in your email twice and type in the captcha ad click request hotfix.

  After 1 minute, you have an email with the link to download an exe file. Use the password is contained in the email to retrieve the update.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Wireless power-press when wake up from sleep / restart windows

  Hi guys, help me please. my computer compaq CQ60 laptop have wireless problem. I don't know what is happening. because each start-up/reboot/wake sleep always must press the button power switch wireless... If not press him wireless not function event light is blue. before aready happen like that so I reinstall the windows problem solving. but this time I don't want to reinstall windows >.<.  thanks="" so="">

  Respect,

  Stepanus Lee

  Hello

  Try the following.

  Open windows control panel, open programs and features, right click on the entry for HP Wireless Assistant and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and reinstall HP Wireless Assistant from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44700.exe

  When the installation is complete, restart the laptop.

  When windows rebooted, open the HP wireless Assistant, click the properties button, enter a tick against "Independent controls for wireless devices installed" and then click on the button "turn on all.

  Kind regards

  DP - K

• browser window is reduced when the computer wakes up from his sleep, must be enlarged twice to restore a window as large as the screen

  I tried to use the reset feature, but it does not work

  I'm not a function like the one available on
  AOL, which allows the "screen size and position" to be saved

  Operating system is Windows 7 x 64. Firefox version is 20.0.1

  Note: my problem has stopped since I expanded manually (instead of using the button to enlarge) the Firefox window to fill the screen

• Satellite don't wake up from sleep or hibernation when the lid is closed

  It is a problem that I had with my laptop from the outset - if the laptop is in sleep or Hibernate mode and the lid is closed, or the lid is closed and will switch "standby" from there, it won't wake up or respond to the switch once again opened.

  Even holding down the power button has no effect, the only way to turn it back on is to remove the battery, put it back and turn the phone back on, lose anything I had opened.

  I fear that the laptop could be damaged by this, but there is no other way.
  This isn't a problem with the settings of windows, I had the same problem with the function suspends in ubuntu.

  Anyone had similar problems or know anything than either could have caused this?

  What model of Satellite L do you have exactly?
  What system is pre-installed? Have you tested this problem with laptop recovery fees?

  BIOS is up to date? If it is not updated in the BIOS.
  After update BIOS, set the default BIOS and test the features of the laptop.

  Your comments would be appreciated

• "KERNAL_DATA_INPAGE_ERROR" when I take my laptop from sleep

  Whenever I take my laptop mode ensures, BSOD with message KERNAL_DATA_INPAGE_ERROR appears and restart my computer OR it stops responding.

  What could be the problem?

  My laptop configuration is:

  Intel Dual Core 1.73 Ghz

  1 GB OF RAM

  Intel 945 chipsets t

  Please help me with this problem.

  Thanking you in anticipation
  

  Rannvijay Kapoor

  My problem has been solved my re - installation Windows XP, but I removed to avoid any future problems. What could be the reason of malfunction of Windows XP? Rannvijay Kapoor