What to download to fix "" Stop error message on a Windows Vista-based or a Windows Server 2008-based computer when you resume the system from sleep mode: Stop 0x000000FE ""

Similar Questions

• Windows Server 2008-based computer when you resume the system from sleep mode: stop 0x000000FE__

  I downloaded the fix for 967102 KB (see above problem) but the fix could not uncompress - it showed the error 40.  The opinion says try again and use a different password would be paid.  I have not received in time.   How long it takes it and what options do I have if it is not received in the next 12 hours?

  I downloaded the fix for 967102 KB (see above problem) but the fix could not uncompress - it showed the error 40.  The opinion says try again and use a different password would be paid.  I have not received in time.   How long it takes it and what options do I have if it is not received in the next 12 hours?

  Hé jpt51

  Here is the vista forums

  Try the repost in 2008 server forums

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Walter, the time zone traveller

• KB967102: Error Stop 0x000000FE when resumes the system from sleep mode

  I got the following error message because I bought my laptop in April 2007.  I sent the laptop to HP to fix March 2010 (extended 3-year warranty).  I got my laptop back, and they doesn't fix it.

  I found this fix on the microsoft.com site and asked him.  They were sent to me by e-mail.  When I try to unzip the patch, I get the error message:

  "An error has occurred all in uncompressing.  One or more files were not unzipped successfully.  The error code is 40. »

  Any help is greatly appreciated!  Thank you very much!

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I sent the laptop to HP to fix March 2010 (extended 3-year warranty).  I got my laptop back, and they doesn't fix it.

  Send it back again. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error message: failure of the last attempt to resume the system from its previous location

  I have problem, I can't do anything computer just stuck on the error message screen that reads "the ultimate attempt to resume the system from its previous location failed", the keyboard does not work I can not choose between the choice that is to say 1. continue with the curriculum vitae of system or 2. delete restore data I can't even boot from an installation CD. Help, please

  Hello aliciamulrainqz,

  Apart from questions of Gerry C J Cornell, I have included a link below where the user reported an error even.  Please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/delete-restoration-data-frozen-Win7-Prof-64/36407a58-e66b-43DE-A21D-f118c85153b4

  Thank you

• Get the error message - Installation Failure Windows Installer not installed correctly when trying to install iTunes

  Original title: Error Message: microsoft windows install not installed correctly

  I'm running on Windows Vista 64-bit.  When you try to download iTunes for my iPad2 (now!) I get an error message when you have almost finished, saying "failure of the Installation Windows Installer not installed correctly.  I've looked everywhere for help.  Tried the auto-fixit... nothing.  Cannot find on my computer to try to do a uninstall, re - install Windows Installer.  (not quite tech-y to see if this is possible or if it would even help.  Please Please someone share their expertise?  Thank you very much, C.

  Hello

  For telephone assistance from Dell, you can consult the site mentioned below:

  http://www.dell.com/support/incidents/us/en/19/Phone/PhoneTagEntry?c=us&s=dhs&cs=19&l=en.

  For more support options affect the site mentioned below: http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&l=en&s=dhs& ~ ck = nohold'a.

• Error message, product key incorrect when you use the key from the bottom of my computer

  I've had my laptop for a long time, but it have not used for a lot more than internet stuff.  However, I occasionally used for Word documents and now apparently used a trial period free but I didn't know existed.  So, I'm trying to put in my product key to get full use of return, but the computer always tells me that it is a mistake.  And it's not!  The number is on a sticker on the bottom of my computer, and I entered it correctly several times.  That I do know?  Thank you.

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010.

  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  Full license:

  http://support.Microsoft.com/kb/823570

  Get the key;

  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

  http://support.Microsoft.com/kb/927921

  Error message when you start an Office application after installing a suite Office: "invalid product key".

  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

• Error 0 x 80070079 windows 7 x 64 win7 - when you try to copy large files to USB. The semaphore timeout period has expired. Help, please!

  Any file larger and begins to copy and Quen stops about 95 to 98% before its finshed. This is some time and comes back with an error 0 x 80070079: the semaphore timeout period has expired. If I boot in safe mode, I get the same thing. I applied http://support.microsoft.com/kb/976972 and it did not help me. Help, please!

  I have Dell XPS9000, Win7 Premium, x 64, I7/920, Nvidia 260, 12 GB of RAM

  Hello

  Thanks for the reply Thahaseena. I think a lot of people have the same problem and it's partially the fault of Microsoft. It is the solution of the problem that works for most people if the heart of the problem is corrupt USB driver (s). The USB driver might get damaged due to defective USB device. This was my case. I bought the 16 GB Sandisk USB which has serious problems. It seems that it is real default, rather than fake. However, I am still investigating.

  This is what happens:

  -Start the copy of the file and at one point gets stuck. After all, you get that infamous error 0 x 80070079. If you try to shoot this defective USB before the error pops out, it's really dangerous abduction of USB that could cause corruption of the driver for the USB controller. This happened to me. So, after this point, none of the USB devices will be capable of the greatest copy files 1 GB +, because my USB drivers are now corrupt and and the transfer is slower. Fast devices and more small files work great, but if you have low speed USB 2.0 device it will not be able to complete the transfer of files at one time and you will receive the error.

  Solution:

  -Stop using the defective device to avoid a repetition of the problem (if you know who is defective). If you do not know, must be eliminated one by one.

  -Disconnect all USB cables except the keyboard cable (at least that is not based USB)

  -Use tabs and the arrows on the keyboard to get to Device Manager

  -Remove all usb drivers, including the one that is connected to the keyboard

  -You may need to force the closure - the dawn of the computer.

  -Do not turn on computer. Get on your knees and unplug the power cord. If you forget this step, the process of booth PC will load faulty driver again. (faulty or bad it depends on the scenario)

  -By unplugging the power cord and let it stay for at least 5 minutes, you force your PC to renegotiate the devices and drivers

  -Connect all USB cables

  -Check the usb status icon in the status bar. Sometimes, you may need to restart the computer if windows asks you to do. Restart the computer if you are not sure what I'm talking about.

  - and... Here we are. Bingo!

  Now, if you plug the faulty device once again, you will need to repeat the process. However, in my case I return to the seller or the manufacturer for repair. You can use this procedure to force the outcrop of USB drivers. That's why I say I blame partially Microsoft for that matter because there is no utility or command available to force this action automatically do that when the problem occurs. This could potentially help people with the question when a few USB ports stop working if its pilots involved.

  If it worked for you, please press useful Votes.

  Thank you.

  Ntongo

• Error - the file name, directory name or volume label syntax is incorrect. "(0x8007007B), when you exit the system restore.

  Original title: System Restore problems

  Hello, I am running Windows 7 Home Premium 64-bit classic mode.  My system specs are listed under my signature.

  Before installing a program today, I went to create a system restore point.  In system properties > System Protection, I see that in the Protection settings > disks available there are two instances of the C: drive tagged like this:

  HDD0 (C :) (System) Protection on (selected)
  HDD0 (C :) (Missing) Protection on

  This is probably due to having recently replaced my C: drive with a disk larger to help to restore from a System Image backup.  The installation seems to succeed.  (I use now!)

  Note: other readers in Protection settings are showing off Protection.

  When I clicked on "Set up" in system properties > System Protection, I have seen that in the restoration of settings, the box "Turn off active Protection" has been selected.  I put the option button "restore system settings and previous versions of files.  In space, the slider was set to 0.  I put it to 1% (857,54 MB).

  When I tried to leave the system of Protection for the dialog to HDD0 (c) I got this error:

  There was an unexpected error in the property page:
  The file name, directory name or volume label syntax is incorrect.  (0x8007007B)
  Close the property page and try again.

  I deleted all restore points, then created a new restore point.  Current usage shows now 29,48 MB.  I still get the error when I try to the OK from the dialog box.  When I click on the system restore and start the Restore Wizard that I can see the restore point, I just created.

  Any help to banish the fake player available and messages will be appreciated greatly.

  -Dave

  ASUS P7P55 Deluxe
  PC power & cooling silent 750
  Corsair CMX8GX3M4A1600C9 (x 2 4 GB DIMMS)
  ZT-98GES3M-FSL ZOTAC GeForce 9800 GT 512 MB GDDR3 256-bit PCI Express 2.0 x 16
  Drive0 (OS) SSD OCZ Agility 2 OCZSSD2-2AGTE90G 2.5 "90 GB SATA II
  Reader1 (data) HITACHI UltraStar A7K2000 2 TB 7200 RPM 0F10452 / MIN 32 MB of Cache SATA 3.0 GB/s
  Lecteur2 (Apps, pagefile, Misc) SSD OCZ Vertex 2 OCZSSD2-2VTX50G 50 GB
  Drive3 (Web data, configuration files Pgm) OCZ SSD Vertex 2 OCZSSD2-2VTX50G 50 GB

  Hey DaveMcKeen,
   
  The error 0x8007007B occurs when the system is configured to store restore points to a location or a bad way.
  
  Set the path to the appropriate Windows 7 restore point.
   
  To remove this error message, follow the following solution:
   
  Step 1:
   
  To set the path of the appropriate Windows 7, restore point as follows:
   
  a. Click Start.
  The Start Menu appears.
  b. type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.
  c. click on continue.
  The System Properties window appears.
  d. click on the System Protection tab.
  e. under automatic restore points, uncheck all invalid location or duplicate
  f. Click to check drive C: with the Windows Logo
  g. click on apply, and then click Ok
   
  Step 2:
   
  Create a system manually restore point:
   
  a. open system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  b. in the left pane, click System Protection, if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click on the System Protection tab and then click on create.
  
  d. in the System Protection dialog box, type a description, and then click on create.
   
  Reference:
   
  create a System Restore Point:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point
   
  System Restore: frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions 

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• error code 0 X 80070052 when you transfer the pictures from flash drive

  How can you fix error code 0 X 80070052 when you transfer pictures to a flash drive?

  Hi WilliamThomas376,
   
  Here's a similar post on this issue to which I replied. Check if the given solution helping you to solve this problem.
  error code 0 x 80070052

• Facing error code standard activate windows server 2008 r2 0x8007007b

  When I turn it on with the product key indicating this error.

  Kindly help me solve this problem

  * This windows server is for commercial use

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• 1E error blue screen on windows server 2008 r2

  Hi friends,

  Please help, I do face with blue screen error 1e, although helping to solve this problem,

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.274.10
  Locale ID: 1033

  More information about the problem:
  BCCode: 1e
  BCP1: 0000000000000000
  BCP2: 0000000000000000
  BCP3: 0000000000000000
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 274_3

  Files helping to describe the problem:
  C:\Windows\Minidump\112914-22651-01.dmp
  C:\Users\Administrator\AppData\Local\Temp\WER-73289-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  [Moved from the community centre of Participation]

  You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver

• Why I can't download Flash Player on my MacOSX10.8.6?  Adobe does not accept my password and it is impossible to change the system from Adobe!

  I tried a million times to download the latest version of Adobe Flash Player on my MacOSX10.6.8.  Adobe does not accept my password - and it's the system to change passwords going no where.  It's Kafka-esque!

  Computers Apple will ask your system password when installing new software. It's probably nothing to do with Adobe at all.

  Try the password that you used when you set up your Mac.

• At startup, the windows startup, an error message that says: "Windows cannot find locally - stored profile login with the temporary profile. "You will lose changes when arrested. What can I do to fix this?

  This Windows XP Home. on a Compaq Presario SR1710NX.  Windows can not find the locally stored profile and logs on to a sense of temporary profile every time that the computer is off all changes is lost.

  Your user profile is damaged and you put in a temporary user profile. This is why nothing is saved. Create a new user profile for yourself and copy the data from the old profile to it. After you have all your stuff, you can remove the old corrupted user profile if you wish. MS - MVP - Elephant Boy computers - don't panic!

• Error message: "ActiveMovie window: wlmail.exe - bad image", when you open an email from Facebook

  I use Windows Live Mail. When I opened an e-mail from Facebook, I get the following error... Title: "ActiveMovie window: wlmail.exe - bad image" content: "C:\Program Files\Common Sonic Shared\SonicMC01\sonicamrd.ax is not designed to run on Windows or it contains and error.» Try to install the program by using the original installation media or contact your system administrator or support software provider. "Your help is appreciated.

  Hello

  You can check out the following link and check if it helps:

  http://windowslivehelp.com/thread.aspx?ThreadId=3c598313-736a-4503-bde7-4c5f4a1d9f9e

  You can also post the question in the Windows Live Forum for assistance:

  Support for Windows Live Mail

  Hope this information is useful.

• What does the green check mark when you change the info from an average of song?

  I imported an album in ITunes, I bought on Amazon and for some reason, adjust the volume slider is all the way up to + 100% on all of his songs. Whenever I try to change this back to normal, a little green check mark next to it. When I click on it, it is up to + 100%. When I ignore it and click on OK, he returned to high volume and won't let me change it. The green check mark means something? How should I do? I don't want to have my ears bleed whenever a song from the album appears when I shuffle. And I really like this album.

  

  The green check mark recognizes that there is a change of treatment. At this point, you must click OK if you want to accept changes or Cancel if you do not.

  In some cases, iTunes will not commit a change if the file is read-only or your account does not have sufficient permissions to make changes. See fix for iTunes for Windows security permissions , if necessary.

  TT2