tc4400 Tablet PC - where to find Windows 7 compatible, quick launch keys / installing the driver

Similar Questions

• I have a windows xp OEM SOFTWARE license key, but the drive has failed. This key will work on any XP installation disc?

  due to a major problem, I have to completely remove the operating system (under license). can I still use this key to set up windows again? I have a key to the back of my sticker only computer laptop written "SOFTWARE OEM windows xp". Can I use this key with any windows xp cd? or I have to use a specific version? can u give me the link to download the specific version?

  Thanks in advance

  You must use the recovery disks provided by the manufacturer (or the integrated recovery system) - see you manual for more details.

  The major advantage of this is that all the required drivers should be included, so that you can immediately connect to the internet and install all updates.

  Reisntalling using the sysstem of correct recovery also means that you shouldn't need to use the key on your COA stiker - as key to 'master' of the manufactuerer is integrated into the system and should not require activation.

• Desktop very very very slow in anyway, installation of windows or open my computer or install the driver and everything

  Simply create a new office:

  Motherboard: Gigabyte Z97x-SLI

  Graphics: Sapphire R9 270 x 2 GB

  CPU: Intel Core i5 4690 Haswell

  Power: Green 750 Watt

  RAM: 2 x 4 GB DDR3 Corsair Vengeance

  Hard drive: 1 x 160 SATA

  It takes about an hour to install windows and when it does it almost kill my to run a process to install a single driver, note that installing driver never compeleted at all!

  Here a few thing I tried and not a whole little progress:

  Modification of ATA/SATA/RAID in the bios

  Remove my graphic card and try again with the VGA on my motherboard

  Remove 4 GB of my Ram and also to reinstall

  My second hard drive removal

  Passing a port SATA 6 GB HDD to SATA EXPRESS

  Update Bios

  Please if you have an idea to share with me

  Concerning

  As for your setting in the BIOS for the graphics?

  Is built in the disabled chart?

  J W Stuart: http://www.pagestart.com

• I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

  I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

  I was struggling with this ACER for more than a year. I have do it I have back when it was still under warranty, 14 months ago. Now I've updated free online through Microsoft for Windows 10 back in early August. I had hoped that my mess was a stack of the operating system, but unfortunately, it's still a piece. However, there is no virus. I run Malwarebytes Pro full time with it has quarantined of PUPPIES as well as McAfee Anti Virus full time. I use cCleaner to keep cut up. I NEVER garguillo or browsed porn.
  I've got max 16 GB of RAM. I have very few applications other than Office 2013.

  Even if this thing was a room at the time where it was running Windows 8 and 8.1, so I want to try to make it work on Windows 10 without having to start over with a clean install. That's why I asked about the drivers.

  your ZC-102 will not have a direct drivers updated from Acer support, which means you have to rely on Windows Update by itself the drivers or get them by yourself.

  Let me give you 3 Tips:

  1) never use Registry cleaners Windows 8.x and above all, they are no longer needed

  (2) uninstall McAfee, he kills the performance of your machine, use the antivirus windows integrated, it is good and very light

  (3) If you require loading time fast on programs, think about an SSD upgrade

• If Windows will send a message when she install the driver for a USB device successfully or unsuccessfully?

  As you know, the window search and install the driver for a new device (USB) coming. We can get the status of the device through Device Manager manually. but I was blocked by the following questions when trying to obtain programmatically.

  Is it possible for me to get the driver installation progress window? Or how could I get the event that she has finished the installation and the result (install has failed or succeeded)?

  Best regards

  -Alvin Hu

  Vista does not send these messages and cannot be configured to do this (progress or when it is done or if it succeeded or failed).  The only way to make sure is to plug and then, go to start / Control Panel / Device Manager and check for the device and click on it for more information on its status.  You can also check if the appliance does not work - it's probably faster and more accurate.  Many USB devices indicate their status by starting to work (a mouse begins to scroll, a USB flash drive or an external USB drive to bring the Autorun screen or appear in the Windows Explorer,...) and USB devices tend to start working quickly enough so it should not be a long wait.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 will not install the driver for hp deskjet 6540

  I followed all the instructions on the site of HP and windows will not find and install the driver for my HP 6540. How to make Windows do what should or is there a reliable place to download the driver from?

  There is a driver recommended relatively complete for the Deskjet 6540 written by HP and Microsoft via Windows Update.  If the automatic install does not work, perform the following steps: connect the printer by USB.  Click Start, devices and printers, adding a printer, select the appropriate port and when the list of printers, click Windows Update in the lower right part of the dialog box.  It will take a few minutes for the update to complete, once that he choose the Deskjet HP (Hewlett-Packard no) 6500 Series.

  If for some reason you can't use the driver provided through Windows Update, you can download the driver from the Windows Catalog site.  The Windows Catalog site requires the use of Internet Explorer.  For the Dsekjet 6500 Series there are three drivers listed.  11.4 Mo is the x 86 32-bit driver.  11.6 Mb file is x 64 64 bit version.  13.9 MB file is the least common architecture IA64.

• Impossible to install the driver Windows XP SP3

  Hi I'm Julviano,

  I have a problem with the driver installation for windows xp sp 3

  I use toshiba satellite c640, in fact, it's already a windows 7 installed on this machine, but because of my program companies is not supported in windows 7, I reinstalled Windows xp sp3 and I download the driver for windows xp in toshiba Web site

  But when I try to installed the driver it say "this computer does not meet the minimum requirements for installing the software.
  I don't know that I have download the right driver

  a driver who can not be installed:
  Intel chipset
  Driver VGA
  Wireless driver
  LAN driver

  can someone help me please?

  Concerning

  (1) I don't know where you downloaded the drivers mentioned?

  (2) this system initially took charge of operating system windows 7 from

  (3) I checked the correct site here

  http://Toshiba-Asia.com/SG/support/drivers

  (4) there is a way, you can run compatible programs in windows 7, windows xp in

  install windows xp mode in windows 7 Professional, ultimate or enterprise only

  (5) before installing read this article here

  http://Windows.Microsoft.com/en-in/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  (6) you can download windows xp mode or virtual pc here

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8002

  (7) you can download windows virtual pc here

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=3702

  Guilbert

• Windows 7 x 64 SP1 on install GPT drive ends at the start of services (constant reboot sequence)

  Details: Asus P8Z68-V Pro motherboard with bios UEFI 8 G of Ram, I7 - 2600K processor

  I started from the install disc Select EFI boot from the boot settings, players like AHCI.

  I had 2 options in my settings to boot to the CDROM, EFI - HL... (mfr - dvd). or just HL-(mfr - dvd)

  selected installation, you press SHIFT + f10 to go to command windows by using diskpart, I set up the drive as being of TPG and then restarted the pc again

  using start EFI to the DVD. The installation went according to normal, creating 3 EFI/MSR/MBR partitions and install it as usual until it rebooted twice and went to start the services... Then he told me that he could not continue and that the machine could continue the installation after a reboot. reboot booted from hd, got to the same point again and again, he has failed and restarted the installer would continue with the new message...

  In my bios boot options, I have a new entry Microsoft boot manager. Any help would be appreciated

  Hello davidwj

  Thanks for visiting the site of the community of Microsoft Windows 7.

  The question you have posted is related to installing Windows in an EFI environment and would be better suited to the TechNet Discussion groups. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/threads

  Install Windows on a computer EFI

• I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

  I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

  Using the Dell recovery disks to reinstall?

  The origonal drive failed?

  If you are using a real MS win dvd during the first part of the installation it can not find a drive or ask a driver, then the driver is obtained from Dell, specific to your model, its likely the driver sata, you need to download to say a USB and then point to this file when the installation application the third-party driver.

• Windows need to install the driver for your bluetooth device

  Hello

  I own the HP Pavilion dv4t-1300 CTO Entertainment Notebook PC

  Runnin vista 64-bit for a year. affected by this bt prob 4 last 1 week...

  on switchin' on bt this error mesge

  "windows should install the driver for your bluetooth device.

  automatic update of windows I've tried

  looking for a driver to support/broadcomm hp product support

  tried installin manually

  BUT NOTHING has WORKED.

  help please...

  For this you need to 1 know which device is... Now, I was not able to find an easy way to do that, other that simply remove these devices one by one and see if the entry from Device Manager will... Or the other thing you can do, is use the reliability monitor and to see after what event the problem started...

• You can use a vista re install the drive on a windows xp?

  You can use a vista re install the drive on a windows xp?

  No.............

• I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success.

  original text: P17.sys

  I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success. I bought Rocketfish to a sound and turns off sound internal on the bios and still get the same error and the show. Help, please...

  Hello

  1. What is the exact error message you get?
  2. Are you not sound on the computer or Rocketfish?

  If you do not get the sound on the computer, then all first activate the sound Board in the BIOS and check. Also, follow the steps in this link and check if that helps:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Otherwise, I suggest you to give us more information about the issue, so that we can help you better.

  It will be useful.

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• OfficeJet Pro l7580 on Windows 8: cannot install the driver

  Try to install the full 64-bit of Windows 8 funtion driver to restore the analysis features

  OfficeJet Pro l7580 (connected ethernet)

  Windows 8 64 bit (clean install)

  Everything worked fine on Win7 64 bit

  Print with 8 default windows driver

  When you install the driver, the driver installation tells me to "uninstall L7300.

  I do not have a L7300, and the printer's ethernet, not USB connected.  I unplugged from the wall and ethernet, but can not go past this error message to install the complete driver.

  The driver might be broken, but I am betting that Windows 8 regenerate the problem will be solved.

  Do a Refresh of Windows 8:

  1. Stand the mouse at the bottom or top right of the screen (if you have a touchscreen, you can slide your finger to the right of the screen to the left) to bring up the bar of charms.
  2. Click settings.
  3. Click on ' change computer setting "below.
  4. Click general.
  5. Scroll down to "Refresh your PC without affecting your files" and click on "Get Started" after that.
  6. Who should start a wizard that will guide you through the update process.

• Cannot install the driver for Windows Phone 7

  When I connect my Nokia Lumia 800 to my PC via USB, phone charges, and pilot the Software Installation icon in the lower corner of the screen indicates that the drivers are being found and installed.

  After a few minutes, what it says; "The software for this device has been successfully installed. Windows Phone 7 - finished, reboot required. »
  So I continue, and restarting my PC, when it restarts the Software Installation icon appears again and begins to reinstall the driver, and then tells me that a restart is required.
  Whenever I restart my PC to complete the installation, the installation process again, so I guess that the driver is eliminated during the restart?
  I haven't restarted my PC about 20 times, and every time it starts the process and invites me to restart.
  I checked the Device Manager before I have restart and it sees driver WP7 but with a yellow triangle, after the reboot, the driver is so more on the list until the icon to install the software driver in the bottom of the screen indicates that the drivers are being found and installed. And the cycle continues.
  Can anyone give me advice as to why my PC will not finish restarting after installing the driver?
  Thank you, Justin Glass

  Hello JustinGlass,

  Thank you for the question!

  I'm sorry to know that have problems you with Windows Phone 7 driver. As I understand it, you can not driver install Windows Phone 7.

  Perform the steps in the link and check.

  What to do when a device is not installed properly(Windows 7) 

  Note: Also applies to Windows Vista

  Answer to us if you are having problems with Windows 7 Driver or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.