TCP error

Similar Questions

• TCP of WCF error 10060.

  Hello..

  I have test hosting of WCF of Hyper-v...

  Virtual MACHINE operating system is Windows Server 2008 R2

  and add Vritual internal network Switch

  the value of ip 192.168...

  and iis assign host wcf net.tcp

  and port sharing is running

  net.tcp listener adapter firewall inbound rules is ok

  where it is good to test local vm...

  but client host to connect vm wcf call... no answer

  and the tcp error 10060 error code...

  Accommodation http is good, client host to connect Server vm

  Net hosting. TCP is error...

  Please answer my question.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Modes of failure in TCP WRITE?

  I need help to diagnose a problem where TCP communication breaks down between my host (Windows) and a PXI (LabVIEW RT 2010).

  The key issues are:

  1... are there cases where to WRITE TCP, a string of say 10 characters, write more than zero and less than 10 characters for the connection? If so, what are those circumstances?

  2... is it risky to use a 1ms timeout value?  A reflection seems to say that I won't get a timeout in uSec 1000 if we use a database of time 1-ms, but I don't know if this is true in PXI.

  Background:

  On the PXI system, I use a loop of PID-100 Hz, controlling an engine.  I measure the speed and torque and control the speed and the throttle.  Along the way, I am in a position 200 channels of various things (analog, CAN, instruments of TCP) at 10 Hz and sending masses of info to the host (200 chans * 8 = 1600 bytes every 0.1 sec)

  The host sends commands, responds the PXI.

  The message protocol is a type of variable to fixed header, payload: a message is a fixed 3-byte header, consisting of a U8 OpCode and a USEFUL of U16 load SIZE field. I flattened a chain structure, measuring its size and add the header and send it as a TCP WRITE.  I get two TCP reads: one for the header, then I have the heading unflatten, read the SIZE of the payload and then another read for that many more bytes.

  The payload can be zero byte: a READING of TCP with a byte count of zero is legal and will succeed without error.

  A test begins by establishing a connection, configuration tips, and then sampling. The stream of 10 Hz is shown on the home screen for 2 Hz as digital indicators, or maybe some channels in a chart.

  At some point the user starts RECORDING, and 10 Hz data go into a queue for later write to a file. It is while the motor is powered through a cycle prescribed target speed/torque points.

  The registration lasts for 20 or in some cases for 40 minutes (24000 samples) and then recording stops, but sampling does not.  Data are still coming and mapped. The user can then do some special operations, associated with audits of calibration and leaks, and these results are stored.  Finally, they hit the DONE button and the mess is written to a file.

  This has worked well for several years, but that the system is growing (more devices, more channels, more code), a problem arose: the two ends are sometimes get out of sync.

  The test itself and all the stuff before configuration, works perfectly. The measure immediately after the test is good.  At some point after that, he goes to the South.  The log shows the PXI, sending the results for operations that were not opposed. These outcome data are garbage; 1.92648920e - 299 and these numbers, resulting from the interpretation of random stuff like a DBL.

  Because I wrote the file, the connection is broken, the next test he reestablished and all is well again.

  By hunting all of this, I triple-checked all my shipments are MEASURES of the size of the payload before send it.  Two possibilities have been raised:

  1... There is a message with a payload of 64 k.  If my sender was presented with a string of length 65537, it would only convert a value U16 1 and the receiver would expect 1 byte. The receiver would then expect another heading, but these data come instead, and we are off the rails.

  I don't think what is happening. Most messages are less payload of 20 bytes, the data block is 1600 or so, I see no indication of such a thing to happen.

  2... the PXI is a failure, in certain circumstances, to send the entire message given to WRITE of TCP.  If she sends a header promising more than 20 bytes, but only delivered 10, then the receiver see the header and wait more than 20. 10 would come immediately, but whatever the message FOLLOWING, it's header would be interpreted as part of the payload of the first message, and we are off the rails.

  Unfortunately, I'm not checking the back of writing TCP error, because she's never not in my test here (I know, twenty lashes for me).

  It occurs to me as I was him giving a value of timeout 1-mSec, since I am in a loop of 100 Hz. Maybe I should have separated the TCP stuff in a separate thread.  In any case, maybe I do not get a full 1000 uSec, due to problems of resolution clock.

  This means that TCP WRITE failed to get the data written before the time-out expires, but he wrote the part of it.

  I suspect, but newspapers do not prove, that the point of failure is when they hit the DONE button.  The General CPU on PXI is 2 to 5%, at that time there are 12 to 15 DAQ field managers to be close, so the instant the CPU load is high.  If this happens to coincide with an outgoing message, well, perhaps that the problem popped up.  It doesn't happen every time.

  So I repeat two questions:

  1... are there cases where to WRITE TCP, a string of say 10 characters, write more than zero and less than 10 characters for the connection? If so, what are those circumstances?

  2... is it risky to use a 1ms timeout value?  A reflection seems to say that I won't get a timeout in uSec 1000 if we use a database of time 1-ms, but I don't know if this is true in PXI.

  Thank you

  If a TCP write operation times out, it is possible that some data did in fact get placed in the buffer, and it will be read by the other side. This is why there is an output bytes written on TCP Write function, to determine what was actually put in the buffer.

  To account for this, you can proceed as follows:

  1. do an another TCP write and send only the subset of the first package that does not get completely passed. Use bytes written to Get String subset for the remaining data.

  2. start with greater delays.

  3. in the case of a timeout, the close link and force a reconnection so that the data of the partially filled buffer not get transformed by the other side.

• Network error (tcp_error) _

  When I try to log on to a Web site, I get the TCP error, now before you say something, my computer wifes THAT XP will log on to Web sites, I've tried, I am running VISTA, it cannot know.

  Hello

  Given the age of the original post. It would be best to ask your own question. When you do, please be as specific as possible about the nature of your problem, including...

  • Error messages that you receive (Unabridged)
  • What troubleshooting have you tried and what were the results of the
  • Details of any material concerned and/or software

  For sure, someone can pick it up and run with it for you.

  Tricky

• Errors in the application latest patch MLR10

  Hi gurus,
  
  Everything by applying the last path MLR10 (8404955) the underside of the errors have been observed.
  
  
  [TCP20SeedTask] the task: from...
  
  creating a TCP seed...
  
  Port
  
  [TCP20SeedTask] task failed: error -: AIP-16012: parameter: transport Pr
  Protocol is unique for the object parameter of the Transport Protocol: error -: AIP-11052:
  Write following objects: Transport Protocol setting failed due to the following
  constraint violation: TRANSPORTPROTOCOLPARAMETER_UK. SATISFAC UNIQUE CONSTRAINT
  N: java.sql.SQLException: ORA-20003: TransportProtocolParameter_UK. Unique const
  violation of Ravel
  
  ORA-06512: at the 'B2B '. TRG_PARAMETER_INS', line 104
  
  ORA-01403: no data found
  
  ORA-04088: error during execution of trigger ' B2B. ' TRG_PARAMETER_INS
  
  to oracle.tip.repos.core.persistency.BaseObject.createObject (BaseObject.
  Java: 988)
  
  to oracle.tip.model.b2b.protocol.TransportProtocolParameter.create (Trans
  portProtocolParameter.java:200)
  
  to oracle.tip.seed.GenericTCPSeedTask.createTransportProtocolParameter (G
  enericTCPSeedTask.java:247)
  
  at oracle.tip.seed.GenericTCPSeedTask.addParameter (GenericTCPSeedTask.ja
  will: 162)
  
  at oracle.tip.seed.GenericTCPSeedTask.createTCPParameterSeed (GenericTCPS
  eedTask.java:112)
  
  at oracle.tip.seed.GenericTCPSeedTask.createTCPSeed (GenericTCPSeedTask.j
  AVA: 94).
  
  at oracle.tip.seed.GenericTCPSeedTask.doWork(GenericTCPSeedTask.java:66)
  
  
  at oracle.tip.seed.SeedDriver.processTasks(SeedDriver.java:222)
  
  at oracle.tip.seed.SeedDriver.go(SeedDriver.java:283)
  
  at oracle.tip.seed.GenericTCPSeedDriver.main (GenericTCPSeedDriver.java:6
  1)
  
  Caused by: error -: AIP-11052: write following objects: P Transport Protocol
  arameter failed due to the following constraint violation: TRANSPORTPROTOCOLPARAMET
  ER_UK. UNIQUE CONSTRAINT VIOLATION: java.sql.SQLException: ORA-20003: TransportP
  rotocolParameter_UK. Unique constraint violation
  
  ORA-06512: at the 'B2B '. TRG_PARAMETER_INS', line 104
  
  ORA-01403: no data found
  
  ORA-04088: error during execution of trigger ' B2B. ' TRG_PARAMETER_INS
  
  to (Catal oracle.tip.repos.core.driver.CatalogWriteDriver.writeObjectList
  ogWriteDriver.java:825)
  
  at oracle.tip.repos.core.driver.CatalogDriver.writeObjectList (CatalogDri
  worm. Java:1419)
  
  to oracle.tip.repos.core.driver.CatalogTransaction.flush (Transact
  ion. Java:477)
  
  to oracle.tip.repos.core.persistency.BaseObject.createObject (BaseObject.
  Java: 955)
  
  ... 9 more
  
  Caused by: java.sql.SQLException: ORA-20003: TransportProtocolParameter_UK. Uniq
  EU constraint violation
  
  ORA-06512: at the 'B2B '. TRG_PARAMETER_INS', line 104
  
  ORA-01403: no data found
  
  ORA-04088: error during execution of trigger ' B2B. ' TRG_PARAMETER_INS
  
  
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException (DatabaseError.java
  (: 124)
  
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
  
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
  
  at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
  
  at oracle.jdbc.driver.T4CPreparedStatement.doOall8 (T4CPreparedStatement.
  Java: 184)
  
  at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows (T4CPreparedS
  tatement. Java:632)
  
  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout (OracleStateme
  NT. Java:1085)
  
  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal (OraclePrep
  aredStatement.java:2983)
  
  at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate (OraclePrepar
  edStatement.java:3056)
  
  to (Catal oracle.tip.repos.core.driver.CatalogWriteDriver.writeObjectList
  ogWriteDriver.java:756)
  
  ... 12 more
  
  -Pilot [TCP seed 2.0]: TASK of TREATMENT END: FAILURE-*.
  
  * == > Restoration of work...
  
  * == > Successful restoration!
  
  Exit code = 2
  
  Update of the seed parameter: PrivateKeyPassPhrase;
  
  Successfully updated seed setting
  
  
  OPatch succeeded.
  OPatch returns with error code = 0
  
  
  We should ignore this error as it is said that opatch succeeded.
  
  The opatch lsinventory command output is also as expected and it displays
  OPatch succeeded.
  OPatch returns with error code = 0
  
  Kindly let me know if she faces an error in the application of the fix or can we ignore it?
  
  Thanks in advance.
  
  Kind regards
  CEMA

  You can ignore the TCP error seeding.

• Creation of SCOM Web Service Proxy OMCF

  I am referring to the Sub SCOM documentation to create an OMCF web service proxy.

  https://msdn.Microsoft.com/en-us/library/hh328977(d=printer).aspx

  When I execute a command:

  Svcutil /language:c# /config:app.config http://localhost:6272/ConnectorFramework?svc
  

     --> Replaced localhost with the actual IP address where my SCOM is installedI get below WS- MetaDataexchange error message. I made sure the data access service is up and running in windows services.Can anybody suggest what could be the issue here? Firewall or the port I am accessing is wrong or do I need to configure any service for this to work? Error: Cannot obtain Metadata from http://10.50.1.153:6272/ConnectorFramework?svc
  
  If this is a Windows (R) Communication Foundation service to which you have access, please check that you have enabled metadata publishing at the specified address.  For help enabling metadata publishing, please refer to the MSDN documentation at http://go.microsoft.com/fwlink/?LinkId=65455.
  
  WS-Metadata Exchange Error    URI: http://10.50.1.153:6272/ConnectorFramework?svc
  
      Metadata contains a reference that cannot be resolved: 'http://10.50.1.153:6272/ConnectorFramework?svc'.
  
      Could not connect to http://10.50.1.153:6272/ConnectorFramework?svc. TCP error code 10061: No connection could be made because the target machine actively refused it 10.50.1.153:6272.
  
      Unable to connect to the remote server
  
      No connection could be made because the target machine actively refused it 10.50.1.153:6272
  
  HTTP GET Error    URI: http://10.50.1.153:6272/ConnectorFramework?svc
  
      There was an error downloading 'http://10.50.1.153:6272/ConnectorFramework?svc'.
  
      Unable to connect to the remote server
  
      No connection could be made because the target machine actively refused it 10.50.1.153:6272
  
  If you would like more help, type "svcutil /?"
  
  C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bin>
  

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• DESKJET 3636: Once again, problems with drivers, ob! DESKJET 3636

  Here we are I am still here to complain for the installation of the drivers, this time with Win10 and a new printer, but the same question that in past. It seems that HP engineer have used bad and strange to pursue a way to write the drivers which conflict with end version of Windows, and I think it's a problem of permissions... but really hard to solve!

  As a result, I'm losing so much time to solve the problem and considering the installation of a printer, it's a matter of 5 minutes I'm really pis * d stop!

  Please read carefully: the printer works, it can print wusing ePrint service and it can print the laptop if I print from Notepad! Only with Notepad! Please avoid issues like "the printer has an IP address?

  The printer is connected to the WiFi, I installed the drivers, the basis and him full, nothing has changed: it allows to print a simple txt file, but it cannot print images 'graphic', Word, same Windows print test page button returns an error.

  When I start the HP software doctor he reviews "solved" a problem (the first voice of the list) and then, if in this application, I press the button test print, the printer prints! But after that he keeps does not not with the PC.

  I can't change the port TCP (errors), I can't change the permissions (System is proprietary, and I can't change it too), for some users, printing is disabled!

  Of course, I deleted the drivers, reinstalled, rebooted the PC, do not ask stupid questions. Also updated the firmware of the printer, nothing has changed.

  Why work so complicated fo HP to make a 'normal', easy to install driver and (especially)? I'm wasting time only here, too bad!

  What can I do? Please respond here in no time! Last time I lost 4 weeks after you changed the printer and the problem also appears in a new! I needed to spend money to call a high-level specialist who, after 3 hours and different call solved the problem. In my opinion is ho windows manage permissions and allow some services! It's huge relevant so that you understand this problem!

  Thanks for the reply but it has not been a solution useful, too easy and drivers have problems during installation on the system.

  I changed a few settings in the printer settings, the most important I've invited was the printer 'sharing', after I maybe had the chance to access/change come voice as the port.

  In port I selected the HP protocol instead of microsoft

  in advanced settings, I selected auto-tuning

  I have the double selection of voices on this printer, but is not serious it works!

• PIX 506 - cannot connect to PDM more

  We have a PIX 506 in a test environment that has been configured in the past using Netscape. Now when we try to connect via https, Netscape says "unable to connect to the server (TCP error: i/o error). The PIX is version 6.1 (1) and PDM is 1.0 (2). I can connect via telnet and change the configuration, but I was not able to get the connection Internet work anymore.

  I captured the connection with ethereal and I see 3 packets, the connection, then the client sends a SSLv2 Client Hello, then the PIX closes the connection. When I dump the telnet configuration, I get:

  Enable http server

  ClientName http 255.255.255.255 inside

  where clientname is defined above in the name and the entries of "place of pdm.

  The PDM installation guide has a troubleshooting section, and it says to make sure the clock is set to UTC. "show clock" indicates the time and date, but no area is listed.

  You have changed the IP address on the PIX interface at some point? If so, try to regenerate public/private key pairs. Fox

  > ca related rsa

  > key gen rsa 512 AC

  > ca save all

  or you can just run the command 'setup' from config mode and it'll do all that for you. Then try to reconnect.

• Company of Mgr 12 lost connection to the RAC databases after the restart of the EM

  
  This last weekend, we restarted our main production RAC database (name = prod, instances = prod1 and prod2) and our certification test RAC database (name = cert, instances = cert1 and cert2).

  These databases have been put up and work OK as a target in MS 12 c for a few months.  However, I was not able to connect to these databases into EM yesterday, so I rebooted the server database repository EM both of EM application server.

  As of today, I can connect to the web console of EM successfully, and I can bring up our databases not CARS.  But if I try to put in place either of our CARS (prod or cert) databases, or if I try to put in place a specific instance prod1, prod2 or cert1, cert2, I get errors like this:

  IO error: the network adapter could not establish the connection

  The connection descriptor was (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = tcp) (HOST = nhaoranla - oracle.nha.local)(PORT=1521))) (CONNECT_DATA = (SID = cert1) (SERVER = DEDICATED)))

  The server nhaoranla where cert1 database instance.  We use the standard port 1521 for all targets.

  Two CARS of prod and cert authorities are running, and user applications are able to connect to the two bodies.

  I have not changed anything in EM.  The only difference with last week's restart.

  I tried to restart the server applications EM once again, but that solves nothing, I get the same error.

  Any suggestions or bugs that are known for this problem would be appreciated.

  Figured out what the problem was... TCP error message indicated it was looking for nhaoranla - oracle.nha.local , but I nhaoranla-oracle in/etc/hosts on the server to OEM applications.

  Lesson learned... If you add databases to the OEM through node discovery, initially, it could work, but it will fail when you restart your server OEM if you don't have good (complete) entries in/etc/hosts.

• Omega TCP IP 66 error

  Good Friday afternoon!

  I used the web interface for my OMEGA with Option Ethernet iNFB counter successfully. Now, I'm rehearsing the communication in Labview. The program appears to write the data very well but then does not receive a response back, or at least Windows is not patient enough to wait one because I get error 66 to try to read. I added a while loop to re-establish the connection when an error trying to read is reported. I still get no response from the unit. The format of the command is:

  * - selected character recognition (any character from ASCII table)

  X - read measurement data in decimal format

  01. address of the first sensor (actually only)

  -carriage return

  When this command via the interface 'internet', the device reacts with (for example): X0100076.0.

  Fixed probe is a probe of RTD and playback of content in the response is correct: 76.0.

  The attached program your dissection.

  Thanks for your ideas...

  Solution:

  The attached above code works fine (less the while loop) when the i-server is properly configured to accept connections. Apparently, when you use the Web interface, this parameter is ignored and regardless of access. To configure the iserver for access set the "number of connections" greater than 0, most often 1 should suffice. Once it's done VI standard TCP/IP communication as fasteners at the top works like a charm.

  I hope I can save someone else some time...

• 63 error to TCP connection open in Simple data Client.vi when connecting to the network storage device.

  Hello

  I tried the simple data client and simple example of data server. I tried this example to connect to a NAS device. My laptop properly communicates with the device since I ping the address of the NAS device and discovered it works perfectly fine. Also, I put the static IP of my pc even as the NAS. So everything I've done. But when I run the program giving the ip address of a NAS device, it shows an error 63.

  Error 63 to TCP connection open in Simple data Client.vi

  Possible reasons: LabVIEW: serial port receive buffer overflow. = LabVIEW: the network connection was refused by the server.

  Why is happening. What can be done to solve this problem. Thanking you.

  vindsan wrote:

  What is the firewall of the SIN.

  Yes, it is very likely. Try disabling the firewall and try again. If the code works when you run the Server & client on your machine, but not when you run the server on your NAS and client on your machine (assuming you have entered the correct port for the NAS server), then it is very likely to be a firewall problem.

  vindsan wrote:

  Server that is listening is no longer VI also means what.

  Your VI server listens only once for a connection after receiving an incoming connection (or it expires after 60 years), he stops listening and the port will be more open for incoming connections - you must re - run the VI for another connection. With your code, you must run the VI server and then run the VI client in the 1960s, so it's not expire.

• Error writing TCP/IP 1.

  Greetings,

  I worked on a small card project his oscilloscope and I was stuck getting an error code 1 when I try to do a writing of TCP. (I want to enjoy on a map of its server, send the waveform over TCP to a customer, and then the client will perform some basic oscilloscope.

  Currently, it is not in a very organized State. Comments have been added and the implementation of state diagram is probably not ideal. A GUI is probably the last thing I want to come back, so there is a, but it's a pretty big mess right now as well.

  In the code, I'm trying to flatten the table 1 d in a string to be sent over TCP, then he unflatten at the customer level. This doesn't seem to be the problem, however. As I said, I get an error code 1 on TCP write to the server. I eventried change simply write a 'Hi' string and tell the client to read 2 bytes. No dice, same error.

  I am both on the same machine running at the moment and trying to connect to 127.0.0.1 on port 40000

  Someone happen to have an idea of why this error continues being implemented? I am aware that it is synonymous with "invalid entry", but I can't understand what is not valid.

  After that I can transfer the data via TCP, my next step will be to reduce the number of samples, I take the soundcard on the server)<1000). it="" often="" crashes="" when="" i="" reduce="" the="" sampling="" that="" low.="" i="" haven't="" tried="" to="" solve="" this="" aspect="" of="" the="" project="" much="" myself,="" so="" i="" feel="" it'd="" be="" rude="" to="" ask="" others="" to="" invest="" time="" in="" a="" solution="" for="" me.="" if="" you="" happen="" to="" know="" a="" good="" suggestion="" readily="" for="" this,="" i'm="" all="" ears.="" the="" main="" problem="" here="" is="" the="" mysterious="" error="" 1="" i'm="">

  To produce this error:

  Set the server and Client to communicate on port 40000. Start the server and put a probe on the TCP write error. Start the client and enter 127.0.0.1 or localhost in the dialog box. The error should appear when the probe is.

  Thank you

  Pheria

  You have confused the ID of listening port TCP with the TCP connection ID.  In the pending state, there's a "Login ID" exit to wait for TCP on the listening port, and it is the reference you need to connect to write to TCP.  In writing to the listener ID causes an error.  A listener can accept multiple connections on the same port, and each connection is assigned its own ID when the connection is established.  This allows you to write a server that can handle multiple connections on the same port at the same time.

• Problems with the start of the vi using TCP on a cRIO, error code 63

  I'm trying to deploy the 'multiple connections - Server.vi' in examples of TCP & UDP to a cRIO as the startup application. The vi works fine and I can connect with many clients until I have deploy the vi and set it as vi on a cRIO device startup. When the device restarts and I try to connect with the 'multiple Client connections 1(vi)"also found in examples of TCP & UDP, I get"error 63 occurred to TCP connection open. Are there additional parameters that need to be enable to allow TCP as the boot vi?

  I don't know that is the question and I don't have an RT target available to test it, but here's a possibility: property nodes sometimes do not work as expected when you run on a RT system without front panel.  In the case of multiple connections - server example, the first thing that happens is that the VI wrote a false value in the property node.  As explained in the link, this has no effect.  For example, if the default value of the control 'Look stopped' is 'True' the top loop will close after the first run, which will stop the VI, probably leading to the error that you see when you try to connect.

  To resolve this problem, I recommend you remove the 'Missed listening' control completely and change conditions to stop for the two while loops.  You run a compiled application on RT, so unless you will connect using a remote panel, there is no need any façade including the stop button control.

  EDIT: if I have correctly identified your problem, you can vote for this idea: "Warn on the face property node to use when you build a RT".

• Good method to reset the tcp connection after timeout error

  I have an application that I build that communicates with a Modbus TCP device.  If a communication occurs error I wish I could reset it TCP communication.  What I have is a control that raises an event when pushed.  In this case, I have a sequence that closes first the tcp connection and then opens a new connection.  My application starts and works very well.  To test the reset function, I removed the ethernet cable from the camera and waited until a timeout occurs.  I plugged the cable reset back to and pushed my control. Sometimes the reset will take place, but most of the time I'll get a timeout in the TCP vi open error.  After that, the only way I can establish communications must leave my application, disable and then enable the network device.  Then, when I restart my application I have communication with my camera.

  Any help would be appreciated on how I should be reset my TCP connection.

  Thank you

  Terry

  Terry S of a. in writing:

  I've attached an example vi (LV10) that shows just the connection TCP and Reset.  An error occurs when you try to run the open in the event of reset tcp protocol.

  As writing that your code should be fine. There is nothing inherently wrong with it. However, depending on the device, you communicate with you can try to restore the connection too quickly once you have closed the connection. The device allows multiple connections to it and may require some time to clean up the things on his end after you close a connection. An experimental basis try wait little time between TCP and the TCP Open shut it down. If possible you can try using Wireshark to see what is happening on the network. It may be useful to diagnose what is happening.

• LeCroy Waverunner TCP/IP error 85 code in Labview

  Hello

  I tried to contact LeCroy Waverunner 64Xi via ethernet. I read the other posts on how to set up the connection and I thin it is not working properly as it responds well when tested through the Measurement & Automation Explorer.

  The name of source VISA looks like this.

  The question that is on all Labview codes, if I get an error:
  "Error 85 has occurred to the channel Scan (arg 1) in lcwave wait to purchase Complete.vi-> lcwave single Waveform.vi of reading.

  "Error 85 has occurred to the channel Scan (arg 1) in lcwave wait to purchase Complete.vi.

  "Error 85 has occurred to the channel Scan (arg 1) in lcwave reading (Px) .vi waveform measurement.

  the reason given is-> Scan failed. The input string does not contain data in the expected format.

  I'm guessing it's because the code itself is not configured for TCP/IP connection? Help

  Nevermind, I found another component that can help with this problem