Automation of database startup and shutdown of AIX for several databases

Similar Questions

• Windows Vista cannot see this background image instead, I see a solid blue color during startup and shutdown

  original title: background logon of windows vista I do not see this background image instead, I see a solid blue color during startup and shutdown

  I use a laptop with windows vista home basic 32-bit sp2

  After turning on the computer laptop, I get a prompt to enter the password at this point, I would usually get a background image and the same background image appeared when I stopped

  I do not see this background image instead, I see a blue solid color when you start and stop as the background image has been replaced by a blue color

  I followed all the steps of the following

  http://www.howtogeek.com/HOWTO/Windows-Vista/customize-your-Windows-Vista-logon-screen/

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/can-you-customize-the-logon-screen/75def0ce-2dc4-48c1-B290-daaf685efca4

  http://www.Vistax64.com/tutorials/79886-logon-screen-change.html

  However, I don't see the background image. the background image is in the right folder location whith the required size as jpg image with the exact registry required such as mentioned in the above links entries

  How do I solve this problem

  Hello

  Did you do changes on the computer before the show?

  You can try the steps and check if you are able to see the background on the logon screen.
  a. Click Start, and then type gpedit.msc
  b. navigate to Computer Configuration and go to administrative templates and go to System.
  c. go to connection and set the "bottom always use custom logon" to activate.
  d. create a folder named C:\Windows\System32\oobe\info\backgrounds
  e. put the file you want, and then name it backgroundDefault.jpg
  f. check your other background for the dimensioning of the info files

• IOP startup and shutdown as windows services

  Hello
  
  Is there a way we could have IOP startup and shutdown as long as services beats windows instead of run the files?
  
  Thank you
  Hari dewyse

  Yes. You can install IOP as service NT and power there.

  Please see "Integrated planning as an NT Service operational facility" in the IOP installation guide.

• Problem of startup and shutdown classes

  Hello
  
  I'm starting a demon when starting the server.
  
  I have defined start and stop classes and deployed the .jar as a shared library (from JDeveloper)
  
  But when he starts throws ClassNotFoundException.
  
  What else is missing?
  
  I am using weblogic 10.3.
  
  Thanks in advance

  There are various options available as the...

  Option-1). Make a pot of your startup and shutdown classes and then put them in the \lib

  Or

  Option-2). you will find in your servers as 'startWebLogic.cmd' or 'startWebLogic.sh"variable Classpath StartScript... you can add it

  Example: part of above Script code

  Set DOMAIN_HOME = C:\bea103\user_projects\domains\7001_Domain
  for %% in ('DOMAIN_HOME %'), set DOMAIN_HOME = %% ~ fsi
  Call "% DOMAIN_HOME%\bin\setDomainEnv.cmd" % *.
  Set JAVA_HOME = c:\bea103\jrockit_160_05
  Set SAVE_JAVA_OPTIONS = % JAVA_OPTIONS
  Set SAVE_CLASSPATH = % CLASSPATH; C:\MyJars\myStartupAndShutDown.jar;
  
  
  Or
  
  Option-3). in "setDomainEnv.sh"(UnixBased OS) or "setDomainEnv.cmd' (WINDOWS)".

  the PRE_CLASSPATH=C:\MyJars\myStartupAndShutDown.jar value;

  .
  .
  Thank you
  Jay SenSharma
  http://jaysensharma.WordPress.com (WebLogic wonders are here)

• Windows 8 Super slow startup and Shutdown/Restart custom - fixed! -Contains the fix!

  Hi, drew here

  I had problems with my windows 8 23 "inches lenovo AIO C540, we got it in may, account of my mom and my account are both connected to a Microsoft account, but my sister is not, he used to about 8 months ago take only 10 seconds to connect and start all startup programs, but now it takes forever!" It takes less time to connect to my sisters account a minute now, but will not completely boot on my account or my mother (used to start Skype and other programs).
  Fixed - look down below
  Please someone help me a lot thank you, Drew Tavares
  
  
  Link to the Lenovo C540 (I have the best model)
  Difficulty
  
  These are viruses that when was deleted and that fixed my computer ^.
  Program Files (x86)\WebCake\WebCakeIEClient.dll
  AppData\Local\Temp\toolbar34801781.exe
  Delete all of the listed files or run a scan with your antivirus program startup

  Hello

  First check to see if any hardware is not available - if she tries to initialize or
  material which has problems, it may take a long time to start.

  Check with Lenovo support, their drivers and documentation online and ask for their
  Forums about known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  ============

  These should help:

  Ways to improve the performance of your PC
  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  Maintenance & performance
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  =======================================================

  You use a 3rd party antivirus/antispyware/security program? If so many people
  can cause slow start from the bottom.

  Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
  online resources and the drivers and ask questions in the forums about known problems.
  Updating the BIOS , drivers of low level chipset and embedded and separate major
  device drivers (anyone who can have an impact on the speed of startup and performance).

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the office and
  Splash screen.

  Check startup programs.

  Right-click in the left lower corner - Manager of tasks
  Or Windows key + X - Manager of tasks
  Or right click on the taskbar - task manager

  Check the Startup tab.

  More troubleshooting:

  How to perform a clean boot for a problem in Windows Vista, Windows 7,
  or Windows 8
  http://support.Microsoft.com/kb/929135

  Other programs to help:

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  =======================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore. Be prepared to re - install the programs, applications will remain.
  And having redundant backups of your files on the disk main hard is always a
  good idea.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Icons displayed incorrectly at startup, the computer is unusable for several minutes

  My computer is less than a year, I'm running Windows 7 Professional, and for several weeks my computer acted strangely. When I turn on the screen displays properly, however some or all (it seems to change every time) of my icons appear as these things white paper folded. It continues for several minutes during which I can't run any programs, but I can use my mouse pointer and the loading symbol when I move the taskbar. After a 5-10 minutes (I've not timed, but it might be compatible), the icons to revert to the normal and my computer seems to work perfectly well. Any idea what the problem might be?

  When a Windows computer starts in place, some of the non-Windows installed on the computer programs also starts alongwith. In your case, it seems that some of these startup programs is responsible for the delay. You can disable startup programs and services non-Windows on the computer by placing the computer in what is called a "Clean-boot". If the problem does not appear in the clean boot state, you can track Windows service start defective or not programme following a policy of division and conquere.

  This process takes a little time. I would say by following the instructions in the following article to diagnose the problem:

  http://support.Microsoft.com/kb/929135

• Satellite 2450-201: slow startup and shutdown

  I HAVE A SATELLITE 2450-201 AND I RUN ON WINDOWS XP HOME EDITION, I DID A REGISTRY CLEANER EVERYBODYS USERNAME USING REGISTRY FIX 5.5
  I HAVE DEFRAGED MY PC AND ALSO OPTIMIZED MY MSCONFIG STARTUP ITEMS AND EVEN THE BIOS UPDATE.
  THE RESULT IS EXTREMELY FASTER WHEN I CONNECT AND ACTUALLY UNDER WINDOWS BUT THE SAME OLD VERY SLOW STOP AND START TO WHAT I DO.

  THE WINDOWS BAR GOING ALONG AT LEAST 15 - 20 TIMES TO HELP START!

  Hello

  Maybe you've connected to some external devices to slow down the start-up procedure. You can also try to disable all the hardware components you n t need (modem. IrDA). Also check out which device is defined in a first start time (I hope that the HARD drive).

  For slow closing is responsible only running processes that should be forced disconnected. It all depends on your own configuration and you are using external devices.

• Lenovo p780 startup and shutdown sound

  Hello!

  How can I change the starting and stopping of Lenovo p780 sounds?

  In fact, I want to disable them, but generally changing, that is the question.

  Perhaps this audio file can be found somewhere on the phone and changed?

  Thank you

  Marcin

  Reach

  -setting

  -all parameters

  -audio profiles

  -general

  -power audiio reading

  see you soon

• Startup and shutdown scripts for Oracle R12 in Windows XP

  I have successfully installed R12.1.1 in Windows XP and connected to the Vision with no problems. But after restarting my PC, I am unable to restart (I don't know how to restart) services.
  I see the other threads that talk about the same scripts in Linux environment.
  If anyone knows - how to start and stop the services of R12 in the Windows environment, please let us know.
  
  Thank you.
  
  Published by: SanDan on July 13, 2012 10:08

  SanDan wrote:
  I have successfully installed R12.1.1 in Windows XP and connected to the Vision with no problems. But after restarting my PC, I am unable to restart (I don't know how to restart) services.
  I see the other threads that talk about the same scripts in Linux environment.
  If anyone knows - how to start and stop the services of R12 in the Windows environment, please let us know.

  Management of server processes
  http://docs.Oracle.com/CD/E18727_01/doc.121/e13675/T530130T530133.htm#5274555

  Thank you
  Hussein

• When I press and hold any key for several seconds multiple letters will not appear. What should I do?

  For example, when I try to erase something by pressing the button to backspace it erases a letter at a time and very slowly.

  Hello

  ·          Is this a desktop or a laptop?

  Step 1: Check what is happening with another keyboard

  Step 2: Change the speed at which keyboard characters repeat http://windows.microsoft.com/en-US/windows7/Change-keyboard-settings

  I hope this helps.

• We have a PC with Windows 7 and have had it for several years, but now can't access my account.

  We have a HP PC with Windows 7, and the normal uses are e-mail, online banking, etc, very few games and these. In the last week, I have been unable to sign my account when I try to do it I wonder an administrator password that I don't have, nor had he ever. I can access some of my files through my son's account but not almost those I need. How can I get my account back once again?

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows in two weeks.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Fed up with Mail. When I open mail it says it is downloading the messages, it can be 2, 3 or more and that is true for a long time. I have to close and reopen to get the content of the messages. Often the mail charge the same messages.

  Fed up with Mail.

  When I open mail it says it is downloading the messages, there may be 2 or 3 messages to load and this is true for several minutes. While showing that it's always getting new messages, Mail displays the message header but not the content, I have to close to stop this lengthy process erratic and reopen it to get the content of the messages. Often Mail load the same message 2 or 3 times, even if I leave the app end its process, Yes, because sometimes it ends.

  Is there anyone who has the answer to this?

  I am seriously thinking of abandonment of post and take something else to manage my emails.

  Thank you for your community!

  You have created all of the subfolders of the Inbox for the account?

• Dreamweaver 2015.1 freeze at startup and during shutdown

  Win 7 x 64 SP1

  5960 x cpu

  MB: RAMPAGE EXTREME V

  64GB mem, Gskill

  ASUS Titan X GPU

  Zalman PSU 1000HP

  Stable the system otherwise.

  It always starts by ' switch to ' / 'Retry', sometimes it just freezes at startup for several minutes.

  and when shutting down, it freezes just minutes.
  

  This happens all the time... I'm fricking out!

  Thank you!

  The problem, or one very similar to it, seems to have something to do with the functionality of cache for the site of DW. A workaround that has helped others is to create a new site and leave it empty then switch to this empty site just before turning off.

  If this does not help, I would also try to disable the Cache of the Site all together...

  1. go to Site > Manage Sites

  2. highlight the site and click the button change

  3. go in advanced > local news

  4. uncheck the box enable Cache

  5. save

  6 rinse and repeat for each site

• Satellite U - crashes during windows startup and restore cannot fix

  Most of the time, but not whenever the laptop hangs when starting windows.
  I get a blue screen, a dump file is created and then it restarts and gives me the ability to start windows normally or by using windows recovery. The windows recovery can not solve the problem.

  When I select the option to open windows normally everything works fine without any problems.

  If I restart the laptop, it will never block.
  The problem happens about 90% of the time when he walks.

  The problem started shortly after the purchase of the laptop in October.
  Initially, it came with Windows Vista and I was wondering if the problem was with Vista so steeple I've upgraded to Windows 7, but it always freezes on most start-ups. Otherwise, the laptop works very well and I'm happy with it.

  I suspect that the problem might be with Realtek, but pilots seem to be up to date. My internet security is trend micro.

  I was wondering if it might be a hardware problem, when this happens on Vista and windows 7.

  Someone has any ideas on what could be causing the laptop to crash at startup?

  Hello

  To be honest, if this problem occurs on the version of Vista and Windows 7 too that sounds like a hardware problem and it s time for an authorized service provider. Technicians can check your laptop fix it. It of fairly new, so I guess that it s still under warranty and the repair is free.

  Here, you can get the closest authorized service provider:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Goodbye :)

• Different behavior between cRIO 'Run as Startup' and debugging run

  Hello

  I have an application that does a lot of things, including playing a card NI 9213 Thermocouple, which lies on a connected to a RT cRIO target expansion chassis. The application is run on the target of RT. My problem is related to a behavioral difference between opening a connection to the channels of thermocouple in debug (by clicking on the arrow on the VI run) mode and the opening of the connection through a Build specification (by clicking Run as to start).

  During execution, the VI wrote in a text file on the hard drive of the cRIO. I enclose the text files, one of the debug mode and a Run as startup mode. I have only two thermocouples connected (ch1 and ch15). From the text file, you can see the connection opens without error in debug mode, but get an error in startup mode. I've also attached an extract showing the VI that I used for the test.

  A few notes:

  Nothing to do with the VI is changed between each type of race.

  The Build specification has the attached VI selected as startup VI, everything else is default

  Someone else out there has had a problem similar to this? I feel like the debug mode should act identically to the normal start deployment. Otherwise, what's the point?

  Thank you

  I solved the problem! Or at least worked around it by setting a different bug. This another bug happened to be the same words that were this bug, to run as a startup. I'll summarize for you: