TE2100 frozen and CMOS / boot problem

Similar Questions

• HP 8150 printer does not print error: Re-installing the printer, unplug the USB and power and re-boot do not solve the problem

  Original title: hade 8150 printer does not print

  Under Vista Home Premium with all updates. The printer is a Photosmart 8150 H - P, which worked well for a few years. Now, when you send a document, for example, a Test page and looking at the queue, I immediately get an error. Re-installing the printer, unplug the USB and power and re-boot do not solve the problem. Grateful for any ideas. Thank you

  Hello

  (a) don't you make changes to the computer until the problem occurred?

  (b) when was the last time it was working fine?

  (c) you use a network printer or local?

  I suggest you try the steps below and check if it helps

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is helpful

• Hello, I have problems with my mac. Sometimes, it becomes very slow and even if frozen and taking too long to respond.

  EtreCheck make a diagnosis and threw the report that describe below, but do not know how to interpret and solve the problem. Can someone help me.

  EtreCheck version: 2.7.7 (237)

  Report generated 2016-01-22 08:51:47

  Download EtreCheck from http://etrecheck.com

  Time 04:21

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click [delete] to remove the adware.

  Click on the link [check files] help with unknown files.

  Verify the signatures of Apple: enabled

  Problem: Computer is too slow

  Hardware Information: ⓘ

  iMac (21.5 inch, mid 2011)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac12, 1

  1 2.7 GHz Intel Core i5 CPU: 4 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  Vacuum

  BANK 1/DIMM1

  Vacuum

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  AMD Radeon HD 6770M - VRAM: 512 MB

  iMac, 1920 x 1080

  Software: ⓘ

  OS X El Capitan 10.11.2 15 c (50) - time since started: about one day

  Disc information: ⓘ

  ST31000528AS disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: 999,35 go-go (418,75 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  OPTIARC DVD RW AD - 5690H)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Card reader Apple

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Adware: ⓘ

  /Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client

  /System/Library/frameworks/VSearch.framework

  2 adware files found. [Remove]

  Unknown files: ⓘ

  /Library/LaunchDaemons/com.Mousebird.NET-preferences.plist

  /Library/LaunchDaemons/com.weaserUpd.plist

  /Library/LaunchDaemons/com.prudentialist.NET-preferences.plist

  /Library/LaunchDaemons/com.corvinaUpd.plist

  4 unknown files found. [Check files]

  Launch system officers: ⓘ

  com.apple.CallHistoryPluginHelper.plist [killed]

  com.apple.CallHistorySyncHelper.plist [killed]

  com.apple.FolderActionsDispatcher.plist [killed]

  com.apple.SafariCloudHistoryPushAgent.plist [killed]

  com.apple.SafariPlugInUpdateNotifier.plist [killed]

  com.Apple.CDPD.plist [killed]

  com.Apple.cmfsyncagent.plist [killed]

  com.Apple.CoreServices.appleid.authentication.plist [killed]

  com.Apple.followupd.plist [killed]

  com.Apple.gamed.plist [killed]

  com.Apple.icloud.fmfd.plist [killed]

  com.Apple.printtool.agent.plist [killed]

  com.Apple.recentsd.plist [killed]

  com.Apple.reversetemplated.plist [killed]

  com.apple.spotlight.IndexAgent.plist [killed]

  com.Apple.telephonyutilities.callservicesd.plist [killed]

  16 killed processes lack of RAM

  Launch system demons: ⓘ

  com.Apple.audio.systemsoundserverd.plist [killed]

  com.Apple.awdd.plist [killed]

  com.Apple.icloud.findmydeviced.plist [killed]

  com.Apple.ifdreader.plist [killed]

  [killed] com.apple.periodic - daily.plist

  com.Apple.softwareupdate_download_service.plist [killed]

  com.Apple.system_installd.plist [killed]

  com.Apple.tccd.System.plist [killed]

  com.Apple.wdhelper.plist [killed]

  com.Apple.XPC.SMD.plist [killed]

  10 killed process lack of RAM

  Launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [loading] com.google.keystone.agent.plist [Support]

  [operation] com.oracle.java.Java - Updater.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist [Support]

  [loading] com.adobe.fpsaud.plist [Support]

  [loading] com.corvinaUpd.plist [Support]

  [loading] com.google.keystone.daemon.plist [Support]

  [loading] com.microsoft.office.licensing.helper.plist [Support]

  [operation] com.mousebird .net - preferences.plist [Support]

  [loading] com.oracle.java.Helper - Tool.plist [Support]

  [operation] com.prudentialist .net - preferences.plist [Support]

  [loading] com.weaserUpd.plist [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [loading] com.adobe.ARM. [...]. plist [Support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist -/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framewo rk/Versions/A/support/CSConfigDotMacCert: Executable not found!

  Items in user login: ⓘ

  iTunesHelper hidden application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  Google + Auto Backup UNKNOWN (missing value)

  Application of Google Reader (Google Drive.app/Applications /)

  Other applications: ⓘ

  [operation] com.adobe.PDApp.AAMUpdatesNotifier.80032.97923F0D-C3D9-4272-9E58-6DED4EB630B3

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000a.EtreCheck

  [ongoing] com.getdropbox.dropbox.19232

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  Default browser: Version: 601 - SDK 10.11

  AdobePDFViewerNPAPI: Version: 10.1.16 [Support]

  FlashPlayer - 10.6: Version: 20.0.0.286 - SDK 10.6 [Support]

  Silverlight: Version: 5.1.40728.0 - SDK 10.6 [Support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.286 - SDK 10.6 [Support]

  googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  SharePointBrowserPlugin: Version: 14.6.0 - SDK 10.6 [Support]

  AdobePDFViewer: Version: 10.1.16 [Support]

  SquareClock_Production_HBMV1: Version: 3a3ca28001d075bf

  JavaAppletPlugin: Version: 8 Java 66 update build 17 check version

  User Plug-ins internet: ⓘ

  ClientManager64_0.33: Version: 0.33 [Support]

  WebEx64: Version: 1.0 - SDK 10.6 [Support]

  Safari extensions: ⓘ

  Zotero connector

  3rd party preference panes: ⓘ

  Flash Player [Support]

  Java [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 999,35 GB disc used: 580,60 GB

  Destinations:

  Lalo [network]

  Total size: TB 3.00

  Total number of backups: 42

  An older backup: 22/12/15 05:39

  Last backup: 22/01/16-08:39

  Size of backup drive: Excellent

  Backup TB 3.00 size > (disk size 999,35 GB X 3)

  Top of page process CPU: ⓘ

  kernel_task 2%

  2% WindowServer

  1% mds_stores

  0% fontd

  0% dock

  Top of page process of memory: ⓘ

  1.23 GB com.apple.WebKit.WebContent (4)

  546 MB kernel_task

  Safari 98 MB

  Mdworker (7) 86 MB

  Com.apple.WebKit.Plugin.64 61 MB

  Virtual memory information: ⓘ

  79 MB free RAM

  3.92 GB used RAM (698 MB cache)

  182 MB used Swap

  Diagnostic information: ⓘ

  January 21, 2016, 22:37:54 ~/Library/Logs/DiagnosticReports/Google Drive_2016-01-21-223754_ [redacted] .crash

  / Applications/Google Drive.app/Contents/MacOS/Google Drive

  January 21, 2016, 22:34:45 ~/Library/Logs/DiagnosticReports/Photos_2016-01-21-223445_[redacted].crash

  /Applications/photos.app/Contents/MacOS/photos

  January 21, 2016, 10:59:53 ~/Library/Logs/DiagnosticReports/FinderSyncAPIExtension_2016-01-21-105953_[reda DECT] .crash

  com.google.GoogleDrive.FinderSyncAPIExtension - Applications/Google Drive.app/Contents/PlugIns/FinderSyncAPIExtension.appex/Contents/MacOS/FinderSy ncAPIExtension

  20 January 2016, 18:50:08 self-test - spent

  Don't panic.

  You are strongly infected by adware, but the cure is simple and fast:

  Download Malwarebytes anti-malware from https://www.malwarebytes.org/antimalware/mac/

  Then run it: it will remove the adware infections.

  Lex

• Dell Precision M4700 (Windows 7 pro) starts not once configured with UEFI and Secure Boot

  To all those who can help you:

  I got a Dell Precision M4700 and I update bios A05. I was intending to move to Windows 8. Everything was fine and the bios update was successful. I started the new bios under Windows 7 Professional (base OS) factory-installed and was very good.

  However, I can't get into the bios (not even see the POST from Dell or Logo) after I activate the UEFI and Secure Boot.This before I update to Windows 8 Pro. Now I'm stuck with a blank screen (same LCD not lit) and nothing to start. It's like a dead PC.

  Help, please. Is that what I can do or should I contact Dell Support for repair?

  Thank you

  I fixed it!  Just removed the CMOS battery, the BIOS got reset back to factory default.  So I did:

  (1) remove the battery

  (2) press the power button to the case of ground

  (3) remove the lower panel

  (4) disconnect the CMOS battery (it's tedious)

  (5) I hit the power button for some time (30 s) to clear the capacitors or something else, it was my theory, but I doubt it's necessary

  (6) use it to all back to the start

  When I turned it on it turns on and turns off several times before finally stay standing and I was then able to enter the BIOS and all the settings have been restored to factory default.  I am new to Windows 7 on my machine so I'll repeat the process, this time without disabling the legacy option roms!

  Here is the disassembly for precision M6700 and M4700 instruction manual if anyone needs:

  http://support.euro.Dell.com/support/eDOCS/systems/wsm6700/en/OM/om_en.PDF

  http://support.Dell.com/support/eDOCS/systems/wsm4700/en/OM/om_en.PDF

  I was talking about the Dell support problem and the guy said he would talk to his superior and see if something needs to be done, so I guess we'll see if something happens.

  I hope it works for you!

  Ben

• using webcam c210, off pc and re-boots logitec

  Why when I try to use my webcam my pc off and re-boot?

  Hello

  ·         You have all the necessary drives webcam updates?

  ·         Did you do any change hardware or software recently before the show?

  ·         Have you tried to use the webcam on a different computer and check if the same problem happens?

  ·         What operating system do you use?

  Method 1

  Check the event logs in Event Viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  Method 2

  Uninstall and reinstall the drivers for the web cam

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Hope this information helps.

• Blue and black screen problem

  I have the blue and black screen problem. I want to format my C drive, but he said no, that you can not format this drive. I know that I have Virus problem also and I want to format anyway. Please help me.

  Thank you

  Hello

  ·         What operating system do you use?

  ·         You get the error message?

  ·         You are able to boot to the desktop?

  Method 1:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

   

   

  Method 2:

   

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

   

   

  Method 3:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• I have my windows automatic update. the other day, my windows updated and Ive had problems of e-mail and online video problems. I have vista Home premium OS. any suggestions?

  can receive email, but not able to send after the recent ('important') updates of windows have been installed.
  also can't see videos on facebook because of the mistakes because of these updates.
  I have the my windows update set to automatic and noticed these problems after an update has taken place. I did a system restore and everything worked fine. Needless to say the next day, the same thing. I even went to the windows update to manual setting, and it is always updated by itself. This made 4 consecutive days. now when I go to system restore, I don't even get the opportunity to go beyond 5 days! video errors on facebook tell me that "the video is unavailable" and "video has been deleted or is not visible because of the privacy settings. I also noticed that most installed updates are updates to windows security. and my windows update seems to be popping up constantly telling me ago over updates to install.

  Hi Unhappy72,

  I'm sorry that you are still facing the same problem. I'll be more than happy to help you.

  I have a few questions:

  (a) what version of IE are you using?

  (b) has been going through the steps to reset Internet explorer?

  (c) you have any version of Flash Player on your system?

  You can try to update the version of Flash Player for videos.

  To do this all first you need to uninstall and then go ahead and download the latest version and install it.

  To uninstall the application follow the steps given below:

  1. open programs and features by clicking on the Start button, click Control Panel, clicking programs, and then clicking programs and features.

  2. Select a program, and then click Uninstall. Some programs include the ability to modify or repair the program in addition to uninstall, but many simply offer the option uninstall. To change a program, click change or repair. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please visit the below given link:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also check if the connection parameters are set by default.

  Make follow them the steps below:

  1. open Internet Explorer.

  2. press the Alt key on your keyboard for the file menu if it is not already there.

  3. go to tools, click on Internet Options.

  4. click on the Connections tab.

  5. at the bottom of the page, it will be a local network settings tab, click on this.

  6. check if automatic detect settings is enabled in the box, if it isn't what to choose.

  7. close all Internet Explorer Windows and reopen and check if the problem persists.

  This should solve your problem of not being able to send emails.

  You can also try to clean boot your system and then try to play the videos. This will let us know if the background services interferes with the proper functioning of your system.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you have disabled all services that you can check if you are able to play the videos. If so, you can try the divide and conquer method to find what service exactly the origin of the problem. For those who follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Alternatively, you can try to disable the modules such that some add-ons can be a problem while browsing through the internet.

  To disable the modules follow the below given steps:

  1. click on the Start button, click principally made programs, on Accessories, click System Toolsand then click Internet Explorer (No Add-ons).

  For more information on the modules, please visit the below given link:

  Internet Explorer Add-ons: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Add-ons-frequently-asked-questions

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a frozen screen of Active recovery of white desk with a mouse. I think that the computer is frozen upward with a problem of recovery? Right?

  I have a frozen screen of Active recovery of white desk with a mouse.  I think that the computer is frozen upward with a problem of recovery? Right?

  How can I fix?

  Hello
  • What were the changes made before the problem occurred?

  You can try to restart the computer and check if it helps.

  If above does not help, you can read the following steps to disable the active desktop on the computer and check:

  a. to disable Active Desktop.
  b. right click on an area empty office, point to Active Desktop, and then click view as Web Page to clear the check box.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ie4_turnon_active_desktop.mspx?mfr=true

• Fix KB2518864 & KB2478658 updates will not install and have a problem. How to solve this action?

  Fix updates KB2518864 & KB2478658 will not install and have a problem. How to solve this action? This fix tries to install when arrested computer, but when the computer is turned back on, there is a box which reads:

  Patching HOTIRON Setup has encountered a problem and needs to close. We are sorry for the inconvenience.

  Hi MrGreener,

  1. did you of recent changes on the computer?

  2 are you able to install all other updates on the computer?

  3. do you have security software installed on the computer?

  4. you receive an error message while updates?

  Method 1

  I suggest that you manually download and install updates, check if it installed correctly on the computer.

  Security Update for Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26323

  Security Update for Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26427

  See also the articles below to learn more about known issues for both updates and check if it helps.

  MS11-044: Description of the update of security for the .NET Framework 3.5 Service Pack 1 and the .NET Framework 2.0 Service Pack 2 on Windows XP Service Pack 3 and Windows Server 2003 Service Pack 2: Jun

  http://support.Microsoft.com/kb/2518864

  MS11-039: Description of the update of security for the .NET Framework 3.5 Service Pack 1 and the .NET Framework 2.0 Service Pack 2 on Windows XP Service Pack 3 and Windows Server 2003 Service Pack 2: Jun

  http://support.Microsoft.com/kb/2478658

  Method 2

  If the previous step fails then I would suggest that reset you the default Windows Update components and later try to install updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• boot problems after "disk error-checking/control - automatically fix file system errors.

  I ran the two options 'check disk' after deleting some old programs and was prompted to restart. When it restarts it was all white screen, then I stop after waiting a few minutes using the power button. now it won't start at all - I have white screen and cannot even get into safe mode by pressing F8. white screen and the fan runs. I is not original boot CD, so tried a CD recovery Norton but would not start from that. I checked the monitor cables.

  It's a 2002 eveshamvale:
  Windows XP Home Edition Service Pack 3 (build 2600)
  Board: Gigabyte Technology Co., Ltd. 8ID533 1.x
  The bus clock: 100 MHz
  BIOS: Award Software International, Inc. 6.00 PG 11/11/2002

  would be grateful for any ideas.
  Thank you

  If you used the power switch, you can inadvertently damage your file system, so before wasting time to try a bunch of things, I could do this (or you may be wasting a lot of time to try things too):

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Error message: this action cannot be completed because the other program is busy. Choose ' switch to ' to activate the busy program and correct the problem

  Original title: server busy

  I get a popup server busy with the message: "this action cannot be completed because the other program is busy.  ' Choose ' switch to ' to activate the busy program and correct the problem.  There are two buttons"'Switch To' and 'Retry '.  Neither fixes the problem and I do not understand what they are talking about.

  Hi adarb,

  1. when exactly you get this message?

  2. what applications do you use when you get this message?

  Method 1:

  You can restart the computer and check if it helps.

  Method 2:

  You try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

  After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Boot problem - which means 'nothing' begins or displays on the screen

  Boot problem - which means 'nothing' starts or displayed on screen (white, black screen).  Do 'hard boot' to the CPU, then Ctrl Alt Delete & to get to the Task Manager.

  In the process, I see the problem of the wercon.exc process.  Once the process is complete, I can use the computer.
  What is the "fix" for this House of Vista Have.
  Thank you

  Hello

  You can view these methods:

  Method 1 : run Startup Repair and check if the problem is solved or not.
  What are the system recovery options in Windows vista?

  Method 2 : run system restore and check if the problem is solved or not.
  What are the system recovery options in Windows vista?

• D6W42EA: Cmos battery problem

  Hello, I broke cmos battery cable entry in my notebook.  And it causes problems when starting laptop. It shows ERROR CMOS screen (502). Is it possible to fix the cmos battery input or I have to change the motherboard?

  Usually if you broke the cable header, you will need to replace the motherboard. Maybe you can find a very adept at soldering that can fix.

• Black screen, with toolbar frozen and no icons

  original title: black screen, with toolbar frozen and no icons! :(

  Hello

  my laptop (vista) recently has devloped a problem in which the Bureau during its connection, is black with no icons and a toolbar frozen. This PC can hang and will only work in safe mode. However, in safe mode, it is very slow, and yet I can not delete all the files, but I managed to save my personal files.

  There is no current system restores for me to do, and I did the test of material, without known defects.

  I also noticed when his connection, because I did not need to press on enter to type my password, the box is already open :/

  Thanks in advance, I hope someone will have the answer to my problem :)

  Sam my setup is:

  Medion M96350, Intel Core 2 Duo, T520 @1.5 - Ghz, Vista Home Premium

  This also happens if you did a recent update of windows that has corrupted or have recently installed the new drivers on something that is causing a conflict.

  I don't really know a final solution but her below can make the black screen disappear temporarily:

  1-ctrl-alt-del to get to Task Manager
  2. go to the "Applications" tab
  3. a 'new task... ". »
  4 type "explorer.exe".

  If the above get rid of the black screen, it is always likely that she will return when you then start the PC, but at least it can allow you to cancel any installation driver/updates to see if that solve the problem.

• the mouse is frozen and I have to restart to operate

  Hello

  I'm really tired with win7 on two PCs!

  -Office Noname card mother ASUS P8H77-M LE Intel i3

  -Laptop HP Pavilion DV6 2111 (3 years)

  For a few weeks (May 5-6) I have the same problem, all of a sudden the mouse is frozen and I have to restart or when I leave the PC 'works' for a while, so I have to hard reboot (CTR ALT DEL inactive).

  Two PC's have the same config, same AV, same apps.

  How to analyze this problem and find a solution?

  If I find not soon, I'm going with Linux; However, it is annoying to Office 365...

  Thanks for help

  Serge

  FYI, I have updated the driver from the motherboard (on the site of ASUS: improve stability)... go see!