Teaching at a distance with SX 20

Similar Questions

• duplication of distance with the pen or line tool

  After you create a line with the pen tool or line, can someone tell me how to make multiples of this line with a space designated between multiple lines in a straight line?

  Thanks in advance,

  Johanna

  Johanna,

  You can take a look at effect > warp & Transform > transform, then apply the desired moving distance and the number of copies desired. With this, all copies will change with the original if edit you it.

  You can object > decaying appearance later if you want separate independent lines.

  Or you can use the object > transform > move, then request a copy and repeat as you want (Ctrl / Cmd + D).

• How can improve the accuracy of my distance?

  I use my iWatch during execution, or jointly with my iPhone 6s or without. When you use my iWatch without my iPhone during execution the iWatch always underestimate the distance with 10%. It is very annoying, especially when I bought my iWatch just for the purpose not having to bringa along my iPhone during execution.

  Can someone please advice how to solve this problem.

  BR,

  Ove

  The watch is calibrated using the phone during the race. If you have already done this, there's not much else to do. The Watch has no own GPS and is only based on the accelerometer. It is still likely to be less accurate than GPS based.

  Try to run a little more with the phone.

• Series Satellite L supports wake up remotely with the remote software?

  Series Toshiba L does support waking the computer from a distance with the remote software?

  What cell phone do you have exactly?
  Which option do you mean exactly?
  WOL (wake up on LAN)?

  In most cases the WOL is supported by the BIOS.

• Problem using the Keithley 6487 pAmmeter with supply voltage.

  I try to use a Kiethley 6487 to bias a photon detector in my lab and I am new to LabVIEW. So far, I've been able to get current the ammeter readings, but I can't increase the supply voltage. The code I came up with so far is able to start communication over distance with the device but returns an error when you use the vi ramp. Here is the error I get:

  1074135024 error has occurred in KE6485 configure Source Ramp.vi

  Possible reasons:

  Driver status: (Hex 0xBFFA0010) invalid value for the parameter or property.

  I removed the piece of code related to the drafting of my main block diagram and changed my global variables to the constants. Any help on this would be highly appreciated.

  Thank you
  Cameron

  
  

• LabVIEW 2009 SP1 crashes when moving large selection with the arrow key

  If I select a lot (10 or 15) diagram components and try to move some distance with the arrow button, I'm often a program crash.  Because a reduced number of components seems to hang after a longer distance traveled, it looks like some sort of buffer overflow error.  I don't see this problem when you use the mouse to move selections.

  I checked to make sure I have the latest version of the video driver for my NVIDIA Quatro FX570.  I also tried to work with no hardware acceleration and no handset, written.  What happens on Windows XP SP3 with all current updates.

  It became so bad that I have to do a save as every fifteen minutes to avoid losing data.

  Why not use my mouse for all movements?  Because it is not as specific and not so easy to limit to only one dimension of the movement.   My hand is not as stable as it once was.

  I'm hoping someone will have a suggestion that will clear up this problem.

  As I have indicated, I had the same problem with 8.5 and just DID a new install of Labview 2009.

  Since it is possible that my three monitors configuration, which of course requires more memory video, may be at the origin of the problem, I am satisfied with workaround by dragging the objects closer to their final destination and then using the arrow keys.

  Three monitors are ideal for the front, block and help/Internet/probe damaged.  When I got to work in the field with a single monitor, I felt severely handicapped.

  You can consider the issue closed.

  Thank you for trying to reproduce the failure.

• How to configure a valid account to windows mail, I also need to establish a connection to make it work with windows 9?

  I want to send an email from the site when I have questions for them even if I'm not setup with a valid account, nor do I have a connection.  My computer runs with broadband. 9 Windows?

  Hello

  You must configure your windows mail with your isp e-mail account, internet service provider for your service to wide band/dialup

  They provide you with account settings you need to do

  Ask them to

  username
  password for your access broadband account / distance with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  and here's how to configure windows mail after getting the email correct account settings

  http://www.vista4beginners.com/Windows-Mail

• BlackBerry Smartphones BB8330 Bell v4.3.0.124 - how to add a '1' to the Canada or US long-distance numbers withput the smart dial option?

  Hello... I called Bell to find out how to add a 1 to my long distance numbers and they said go to options > numbering however my BB8330 has no chip / or display option smart dial under "options".  Currently my long distance numbers are programmed in contacts showing the 1-800-XXX-XXXX but when I dial number, the screen don't watch not '1' operator said that the number cannot be completed as composed, please check the number and dial... which means I actually have to dial the number with a '1' myself.  It's a pain.  What is the point of store the reference long distance with a '1' if I have to do this all the time?  Someone at - it a response?  Yet ONCE... my phone is not smart dial option. I tried to find it under other headings, but not luck and can't find anything online that helps so far.

  Thank you!

  Your phone has the option of smart dial.  From the home screen press the green phone button.  Then press menu button (to the left of the trackball) and go to Options.  Then select Smart dial.

• Poblem with Windows Anytime Upgade. Windows 7 Starter to Home Premium

  Hello

  I have problems with the installation of the Windows Anytime Upgrade on my Acer Netbook.   Windows 7 Starter to Home Premium.

  I put in my product key, and it seems to have been accepted.

  After about 10 minutes of downloading, the message reads that Windows Anytime Upgrade was not successful. Please retry the upgrade.

  I tried several times, but the same thing happens.

  Have made my anti virus and firewall, but it made no difference.

  Please can someone help.

  Thank you

  Windows 7 Anytime Upgrade:
  Use the "Anytime Upgrade" option, you need to do is enter the product key Windows 7 Professional.
  Start/find and enter: upgrade Express

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  A 'step by step' to go through an upgrade to a lower edition of Windows 7 to a higher edition of Windows 7:
  http://windowsteamblog.com/blogs/Windows7/pages/the-Windows-Anytime-Upgrade-experience-for-Windows-7.aspx

  Paths to upgrade Windows 7 (supported upgrade scenarios)
  http://TechNet.Microsoft.com/en-us/library/dd772579%28WS.10%29.aspx

  Most likely the best option and the most popular will be the Home Premium upgrade to Windows 7 Professional, which includes Windows XP Mode. The extra $50.00 for Windows 7 Ultimate will only give you two additional features, bitlocker (for security) and the ability to switch between any of 35 languages.

  Windows 7 - Anytime Upgrade - frequently asked Questions:
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions

  Windows 7 - upgrade Express features:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

  Windows 7 - version comparisons:
  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:
  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature. The "Antime upgrade" will not work for users who have system integrators and or OEM product keys, this applies also to VL (Volume License), MSDNAA or key teaching will not work with the Express upgrade. KMS users consult your administrator before attempting to perform an Express upgrade.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Upgrade in Windows 7 Home Premium to Windows 7 Ultimate with no disc

  Hello everyone. I hope someone can help me. I tried all day even with Microsoft technical support and nothing.

  I bought a software package for Windows 7 Home Premium to Windows 7 Ultimate with no disc. Once you open instructions are going to this link: www.windows7.com/getkey then enter a PIN code provided in the package. Well, it turns out that once you enter the link and press ENTER to the web page that appears is different, so you do not have a possibility to enter the PIN code to get the product key.
  I call microsoft support and no. surprise... no support at all!
  I would appreciate if you guys can help me get the correct link where I can enter the PIN number provided and get my product key.
  Thank you.

  Windows 7 Anytime Upgrade: Instructions (also read the section "other methods"

  First read this: Windows Anytime Upgrade: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions
  Subdivision: What should I do if I bought a package of Windows Anytime Upgrade key card, but there is no upgrade key inside?
  Answer: If you bought a package of key card upgrade and the upgrade key is not inside, carefully read the instructions on the packaging. You may need to go online to get your upgrade by using the PIN key which is included in the package.

  Note: Windows Anytime Upgrade is available for purchase online in Australia, Belgium, Canada, Germany, France, Italy, Japan, Netherlands, Spain, Sweden, Switzerland, United Kingdom and the United States.

  If you encounter problems recover your key product using your PIN code, please use the resources below.
  www.windows7.com/getkeysupport.

  ======================= Upgrading ======================================

  No need to re - install Windows 7, just use the instructions of setting "Anytime" below.
  Note: This assumes that you upgrade from 32 bit to 32-bit Windows 7 OR 64 - bit to 64 bit.

  If you bought a package of key card upgrade and the upgrade key is not inside,
  read carefully the instructions on the package.
  You may need to go online ( https://windows.getmicrosoftkey.com/) to get your upgrade key
  using the PIN, which is included in the package.

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Alternative methods:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  Enter the text below into the run (Windows KEY + R or a command prompt) dialog box:
  %windir%\system32\WindowsAnytimeUpgradeUI.exe

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  A 'step by step' to go through an upgrade to a lower edition of Windows 7 to a higher edition of Windows 7:
  http://www.howtogeek.com/HOWTO/14943/how-to-upgrade-your-NetBook-to-Windows-7-Home-Premium/

  -Windows Anytime Upgrade in Windows 7 - troubleshooting

  http://www.thewindowsclub.com/Troubleshooting-Windows-Anytime-Upgrade-in-Windows-7

  Also the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators of systems product keys, this applies also to the VL (Volume License), keys (KMS) users management server should consult with your administrator before attempting to perform an Express upgrade. MSDNAA or key teaching will not work with the Express upgrade.

  -Anytime Upgade options-

  Windows 7 Starter to Windows 7 Home Premium
  Windows 7 Starter to Windows 7 Professional
  Windows 7 Starter to Windows 7 Ultimate
  Windows 7 Edition Home Premium to Windows 7 Professional
  Windows 7 Edition Home Premium to Windows 7 Ultimate
  Windows 7 Professional to Windows 7 Ultimate

  J W Stuart: http://www.pagestart.com

• Can I be qualified as a teacher for 15.99 package, while on the teaching of supply.

  I'm a teacher Deputy design technology, with a valid number of GTA to prove my credentials for teaching, because I don't have a permanent position can I use the option of teaching for all applications to 15.99 per month. Get involved in all areas of education for packages more I know best.

  Request student/teacher discount

  http://www.Adobe.com/go/edu_verify_ecomm_us

  For more information about the provisions of the student/teacher, you can refer to the following information page:

  http://helpx.Adobe.com/x-productkb/policy-pricing/Education-FAQ.html#main_submit_poe

  Another good resource for information is the student and teacher edition information forum:

  http://forums.Adobe.com/community/download_install_setup/student_and_teacher_edition_infor mation_? view = discussions

• Long Distance vMotion

  Hi guys,.

  Please help me to gain some knowledge here, because I'm really very confusing. I understand (or understand) vMotion at the same level physics site, i.e. all hosts to connect to the same VLAN for vMotion and all guests can see the same LUN storage... you can vMotion should be child's play...

  But I really struggle with the concept of long Distance vMotion... that is another physical site where the same VLAN may not exist and indeed the same storage LUN cannot exist... can someone please (please) explain how this concept would work or how such an activity of vMotion can be implemented? vMotion for me means being able to move a virtual machine from one host to another without any downtime of the virtual machine, that is why I am struggling to understand the concept of a vMotion of long Distance with different networks and storage on different site.

  Confused Dryv

  so effectively you're saying we need meet the pre-reqs that apply to the creation of a vMSC inorder to get long distance vMotion to work?

  Yes, all requirements fundamental clusters as for vMSC applies here as well. It's the same cluster stretched with a more 'cool' name implies support for distances longer than a metropolitan area.

  -What is vmotion without shared storage? This implies that you need not shared storage for vMotion activities? is it still possible? I hear this a lot... the term sharing nothing vmotion I hear people throw a lot!

  vSphere 5.1 presents the vMotion (vMotion "reinforced") turf, which is basically storage vMotion and vMotion of calculation at the same time on the network. You have no need of storage shared between source and destination host but you still need to layer 2 for VM networks and vmkernel connectivity. Of course, it will take much more time than a regular vMotion with shared storage because you must copy the entire VM disks. See here for more information:

  http://wahlnetwork.com/2012/11/21/leveraging-VMwares-enhanced-shared-nothing-VMotion/

  so, if I told you:

  "yes we can just virtual computers vmotion from one site to the other.

  and the underlying environment has been configured as follows:

  -Unique VCenter for all sites

  -Clusters by site (for vMotion/DRS/HA in a cluster only)

  -No VLAN stretched between sites

  -Routing in place across all sites

  -No SAN or SAN replication that extends between sites

  What would you say to me?

  Is there a way (or even remotely possible) "we can just virtual computers vMotion from one site to the other?

  In this scenario you can technically , through the above mentioned improved turf vMotion. But without VLAN stretched your VM will be accessible from the other site, unless do you a few magic fantasy to the physical network layer or decide to re - IP manually the machine virtual or the network as NSX virtualization.

  However, any type of vMotion between hosts is only officially supported if vMotion vmkernel interfaces are on the same domain of dissemination of layer 2. Apparently, you can get an approval of support for VMware kludgy as this http://cumulusnetworks.com/blog/routed-vmotion-why/.

  This will change with vSphere 6 that officially supports vMotion traffic routing however.

  Also note that in this scenario there is y no HA or DRS between sites since your clusters are divided. But the generally longer the general idea that underlies the vMSC or his brother of distance is to have a single stretched cluster.

  I recommend you read some of the messages of Ivan I've linked my post before he made some good shots of face on the whole subject from a perspective of networkers.

• PhongMaterial.setMaterial "bug" with MeshView and multiple TriangleMesh

  Basically, I create a group of TriangleMesh using 1 mesh, creating a new instance of the view every time and just defining the coordinates to create a group that has batteries high, wide and deep.
  
  In the code I originally wanted to do
  

  (if w % 2 ==0) 
  {
  p.setDiffuseColor(Color.RED)
  }
  {
  else
  {
  //blue
  }

  As a result, displaying only the second color in this case, or the first color if w %2! = 0, which was weird.
  
  
  Then, I entered this next issue to attempt to define the scale and the high.
  

   protected final void populate()
                  {
                      for(int w = 0; w < wide; w++)
                      {
                         MeshView meshV = new MeshView(this.mesh);
  
                             p.setDiffuseColor(Color.AQUA);
                          
                        
                          meshV.setMaterial(p);
                          
                           super.getChildren().add(meshV);
                           
                      }
  
                      for(int h = 0; h < high; h++)
                      {
                         MeshView meshV = new MeshView(this.mesh);
                        
  
                             p.setDiffuseColor(Color.ANTIQUEWHITE);
                     
                          meshV.setMaterial(p);
   super.getChildren().add(meshV);
  
                  }

  So, try to affect the material in both loops I get all the s MeshV be ANTIQUEWHITE. If I get rid of the second setMaterial I'll have the first ANTIQUEWHITE set and the second gray. each other in the first results being grey and the second ANTIQUEWHITE.
  
  
  Now it seems to me that if he does everything with just this 1 setMaterial, but I don't know why if I create a new instance each time. If it was the MeshV even, perhaps, but in this case, it's weird... I have no real use for the handling of the MeshView later, I just need to create the mesh and then aside, their distance with the code for that is not stated above.

  According to this Web page 'features 3D' https://wikis.oracle.com/display/OpenJDK/3D+Features | https://wikis.Oracle.com/display/OpenJDK/3D+features]:

  -javafx.scene.shape.Mesh: sharable between several forms defined by the user
  -javafx.scene.paint.Material: sharable between several Shape3D nodes

  In your code you re-use the mesh instance (TriangleMesh) and the instance of p (PhongMaterial). These instances are not copied, they are referenced. Any change requested to 'mesh' and 'p' will affect ALL users (MeshView).

  Creation and re-use of two PhongMaterial, pAqua, and pAntiquewhite objects, should lead to the Visual effect desired.

  August

• How to check if physical Standby is in phase with the primary

  Hi all
  
  I'm new in Data Guard. In our current production, my boss asked me to write a shell scripts for monitoring physical standby and archive primary's sync (gap of archive)
  
  I refer metalink [861595.1 ID], but when I ran the first query to the primary node, the screen lock.
  
  On primary
  ========
  
  SQL > SELECT THREAD # "Thread", SEQUENCE # 'last generated sequence.
  V $ ARCHIVED_LOG
  WHERE (THREAD #, FIRST_TIME) IN (SELECT THREAD #, MAX (FIRST_TIME) FROM V$ ARCHIVED_LOG GROUP BY THREAD #)
  ORDER BY 1;
  
  I tried to turn on 10046 trace SQL, SQL consume a lot of CPU and it full table scan in X table KCCAL $.
  
  Eye of TKPROF result as below:

  call     count       cpu    elapsed       disk      query    current        rows
  ------- ------  -------- ---------- ---------- ---------- ----------  ----------
  Parse        1      0.00       0.00          0          0          0           0
  Execute      1      0.00       0.00          0          0          0           0
  Fetch        1     88.29     115.59          0          0          0           0
  ------- ------  -------- ---------- ---------- ---------- ----------  ----------
  total        3     88.30     115.60          0          0          0           0
  
  Misses in library cache during parse: 1
  Misses in library cache during execute: 1 Optimizer mode: ALL_ROWS Parsing user id: 80  
  
  Rows     Row Source Operation
  -------  ---------------------------------------------------
        0  SORT ORDER BY (cr=0 pr=0 pw=0 time=21 us)
        0   FILTER  (cr=0 pr=0 pw=0 time=19 us)
     1124    FIXED TABLE FULL X$KCCAL (cr=0 pr=0 pw=0 time=40537 us)
        0    FILTER  (cr=0 pr=0 pw=0 time=115538625 us)
     1122     HASH GROUP BY (cr=0 pr=0 pw=0 time=115530193 us)
  7465972      FIXED TABLE FULL X$KCCAL (cr=0 pr=0 pw=0 time=94648975 us)
  
  Elapsed times include waiting on following events:
    Event waited on                        Times   Max. Wait  Total Waited
    -----------------------------------   Waited  ----------  ------------
    SQL*Net message to client               1        0.00          0.00
    control file sequential read        16841        0.05         30.88
    SQL*Net break/reset to client           1        0.00          0.00

  Because of this is the production environment, so I had put an end to the session, anyone can teach me or share with me the physical monitor in standby mode scripts is sync with primary or not? Or you encounter the above problem when you run the SQL code?
  
  My version of db is Oracle 11.2.0.1.0
  
  
  Thanks in advance.
  
  Kind regards
  Klnghau

  Just be aware that these queries are queries controlfile and if they run too long can get in the road of the database as they hold controlfile locks. You'd better watch the view v$ dataguard_stats the day before and look at the GAL apply and transport.

  We are also a few scripts in our book - http://www.amazon.com/Oracle-Guard-Handbook-Osborne-ORACLE/dp/0071621113

  Larry

• Calculating the distance between two images... ?

  Hello

  I'm trying to calculate the distance between two images (A and F - there are other images between A and F), but I can't seem to understand how to make good sense.

  Image A.x is "(stage/2)-(A.width/2)" and the image of F.x is "provable - imgSpace" which is a negative value (all images x is a negative value for image A.x). "

  In my view, the calculation is F.x - A.x, and although it could be good I still ned the value to be non-negative.

  Does anyone know how to do this?

  Thanks in advanse...

  I think you can find out the distance with this equation,

  var len:Numer = Math.abs (A.x - F.x);