Technical data Toshiba 5 "TFD50W40-A necessary screen

Similar Questions

• Transmission of data between the clarification of the screens

  Hi, thanks for taking the time to help

  This issue has been raised before. But he never seems to be a direct response to this problem.

  I have two screens. The first screen has a button and a LabelField. The button pushes a new screen with a timer on this subject. I'll start the timer on the second screen. Now, I want to pass the value of a that time, as a string, return on the first screen to be placed in the LabelField.

  May I ask, how can I do this please?

  PS. is it possible to pass by reference in Java... I'm a newb as you may have guessed.

  "This issue has been raised before. '" But he never seems to be a direct response to this problem. "

  "I am a newb as you might have guessed."

  I think that these two points are related.  In other words you don't know how to do what you want because you're new to Java.  And for more confusion, there are at least 3 different ways to do it.

  One way is to static variables, as the previous poster suggested.  I personally would not recommend that approach, as for me using methods and static data is kind of anti paradigm object (at least it seems that way to me).  Just it's just personal.  YMMV.

  Think in terms of purpose, at its core, a screen is just an object.  It is understood by the system to provide an intervention of the user interface, but it is above all an object.  A part of the question you ask here is:

  "I have two objects.  .... Now I want to spend a time value, as a string, the second object, the first object. »

  A simple answer to this question is to use a ' getter '.  If 1 object creates the object 2, then an intervention takes place 1 item then gets the value of the object 2.

  So that's part of the problem solved, in a friendly manner of the object.  Now the second part:

  "The button pushes a new screen with a timer on this subject. I'll start the timer on the second screen. Now, I want to pass the value of a which time... »

  I assume that you need not the return value in the Second screen until the user has closed the second screen?  In this case, when you tap on the screen, use pushModal.  Then the control is returned to the statement after the pushModal when the second screen is closed.

  Now the third part of the process:

  "to be placed in the LabelField.

  If you have a reference to the LabelField, then you can 'set' the value you have in the second screen using your getter.  This code would run after the pushModal.

  Job done...

  Other variations on this include having 2 screen be a reference to the display 1 function and update the value directly.

  But my favorite is not having the data in a Screen object.  Have a data object that contains the value of the timer, have getter and gets of the setters on this data object then Screen2 sets and screen 1.  Both screens are in need of a reference to this data object.  But the big advantage of this approach is that if theer is Screen3, who also wants to see this same value of the timer, so it can be given a reference to the data object and all three screens will see the same value, because it is the same value, without effort.

• Google Finance (technical data)

  Hello

  This morning Google Finance/Adobe do not display the links for the technical characteristics chapter (MACD, strips of Bollinger, MA, etc.)

  I have Google Chrome ADOBE flash player is embeded.

  Have you tried INTERNET EXPLORER and FIREFOX, and it's the same situation.

  Have notified GOOGLE but this seems a black hole.

  Have all the latest security news and have cleared the cache.

  I don't know what else to do (IE. Not sure if it's google that provide technical data are no longer, or if Adobe flash player no longer works, despite being ACTIVE).

  Anyone having the same problem and can offer advice.

  Thank you

  Thanks for the good news! Ha ha ha! Really, I wasn't expecting to be fixed. I want to thank everybody and especially Adobe staff. Thank you very MUCH for caring and helping us get the problem fixed. You, Adobe guys, ROCKKKK!

• Toshiba U10 Docking Station causing screen freeze

  After running my monitor external docking of th #rough the U10 my screen will freeze periodically. The only way to UN - freeze is to detach the PC and then re-dock.

  I use a 32-bit laptop to Windows 7 with 3 GB of RAM. All drivers and patches are up to date and I have to update the U10 driver to the latest version, all this without any successful resolution.

  Any help would be appreciated as it happens at least 4 times a day and is very annoying and embarrassing.

  Thank you

  Hello

  I think that it of difficult to say what could be the problem exactly.
  You are able to reproduce this issue? I mean you said that the screen freezes periodically does happen a certain application running?

  As far as I know the European Toshiba driver page provides the utility Dynadock v2.4.0.13 for Win 7 32 bit and 64 bit.
  The v 2.1.4.4 Setup CD is also available for download

  Maybe you need to reinstall this even if you said, that you use the latest version of the software
  I would also recommend test this Dynadock in relation to another PC
  Maybe the laptop preinstalled software causes this problem.

• Urgent need to contact Technical Support Toshiba - my new computer laptop is useless

  I just bought the C650. I have never been so unhappyb with; a laptop in my life. I urgent need to Support Toshiba to contact me. Or someone give me their phone number that of not clearly localizable without hours of searching and still holding on a laptop useless, I just bought. Or is their a form I can fill out line which can be transmitted to Toshiba support technicadl. I should be able to communicate with them via e-mail or by filling out a form telling them my problem.

  My problem is the following. THIS laptop that I just bought is completely useless and why. I have never in my life had a poor machine so badly so slowly in my life. Your old desktop of 15 year on DIALUP can work better than this machine I just buy what is on broadband wireless.

  I am not anything it takes forever for it to power upwards or stop. It takes forever for a screern to load... Then, he won't let me multi-task I joined weight forever for a single screen to load and finish before anything else.

  NOW THERE IS CLEARLY A SERIOUS PROBLEM. LEM WITH THIS MACHINE... and I WOULD LIKE MY MONEY ON CETTE MACHINE, if THIS MACHINE does IS NOT of to WORK CORRECTLY in THE NEXT 48 hours.

  I look forward to hearing of TOSHIBA TECHNICAL SUPPORT WITH THE UTMOST URGENCY

  Please don t get me wrong but it's user in the forum and if you need to contact Toshiba service or support this is a really bad place.

  I put t know how long have your laptop now, but it is well known that you have set the time to bring your new product back so I put t understand what are you made here.
  Go to the store and bring it back. End of the story.

  Otherwise call Toshiba s in your country and explain the situation. What you can also do is to contact directly the closest Toshiba service provider and clarify all the issues you have with your new Satellite C650.
  Addresses and phone numbers, you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  I hope you will clarify all this soon.
  Good luck.

• How to transfer data from an old laptop (broken screen) to a new laptop

  How to retrieve data from an old laptop, to transfer to the new laptop. the problem is that the screen is broken on the old portable th.

  From Internet Explorer

  Original title: data transfer

  The easiest way would be to put his HARD drive in a box that connects to the computer by USB.

  This is just an example - http://www.amazon.co.uk/Hard-Drive-Caddy-Case-Enclosure/dp/B003MVW2SM

  You probably have a 2.5 HDD "because I know that all laptops do.  If you need to buy an enclosure for a 2.5 drive "[not a disk 3.5" that could come from a desktop computer].

  Almost all cases derive the power to drive the HARD drive to the USB itself [rather than an external power].  If you see one that needs an external power supply, then you are probably looking to the wrong thing.

  You need to know if the HARD drive is IDE or SATA.  It depends on the age of the computer.  Your computer's manual should tell you or you can whip the HARD drive just to have a look.

  • Here is an illustration of an IDE - http://www.amazon.co.uk/Generic-Toshiba-Fujitsu-Samsung-Hitachi/dp/B0042WZZD4/ref=pd_sim_147_4?ie=UTF8&dpID=21bYEH0CONL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=125C3XKTAFS54XACCCZ8 - connection if you look at the diagrams that you will see that there are long rows of pine trees coming from the HARD disk - what is FDI.
  • Here are illustrations of a connection SATA - http://www.amazon.co.uk/Screw-drive-Enclosure-laptop-Laptop/dp/B003RIL0EM/ref=pd_sim_147_2?ie=UTF8&dpID=419CrJiBX9L&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=125C3XKTAFS54XACCCZ8 and http://www.amazon.co.uk/drive-Enclosure-laptop-Caddy-Laptop/dp/B00926NM8K/ref=pd_sim_147_9?ie=UTF8&dpID=31sO4aOkykL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=125C3XKTAFS54XACCCZ8 - the diagrams show the link inside that connects the HARD drive on [if it's a reflection of what sticks out from HARD drive]-you can see that the connection is a long slot in two sections to the HDD has a long protruding into two sections - which is SATA.

• Toshiba still WT10 2A - touch screen not working not

  I bought less than a week ago and I'm having problems with the touch screen. It stops working all of a sudden without reason and I have to restart to make it work. It will work very well for hours sometimes, but sometimes I have to restart every five minutes. Can someone please help me solve this problem.

  Thank you
  Karman

  Have you ever tried to retrieve the Tablet back to factory settings?
  If this is not the case, try.

  Here is a nice document HowTo showing you step by step detailed instructions for the recovery of the device using the HDD recovery procedure:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

• Toshiba virtual store - black white screen

  Plese reset my TOSHIBA 18468 VIRTUAL STORE account.
  Last reset I did not download the update of the online store.
  Now, I get a blank black screen :(

  Sorry for this and/or my bad English

  Have you tried the advice posted in this thread?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=73051

• Toshiba A60 starts not (black screen, no BIOS, no HARD disk)

  Please help me, there is no toshiba dealer in my country and my laptop has not started; I don't know what to do.

  Hi, Naj,

  You simply turn on one day and it did not? Not even (In Touch With tomorrow + Intel Inside) Welcome screen appear? What indicators (battery, HARD/CD/DVD disc, power) and the light around the button? I'm curious because you did not say much.

  András

• What is uk technical support Toshiba email address?

  What is uk technical support email address? Toshiba

  Hello

  AFAIK there is no email address.
  You can just call the hotline.
  Find suppliers of services to
  http://EU.computers.Toshiba-Europe.com
  under decision supported downloads &-> find an authorized service provider

  Good bye

• A technical problem concerning the replacement of the screen on a Satellite Pro

  Hello

  The original on my laptop screen is a screen with the following reference: NTL154X3 (made by Samsung). Two weeks ago, that I replaced it with a matte screen with the following PL154W01 (made by LG_Philips).

  The laptop works very well since then, but the screen is roughly half as bright as it should.

  Play with FN + F6 increase brightness and FN + F7 decrease. The F6 and F7 works in reverse order compared to what they use to be after replacing the screen. In addition, I have to press these buttons to change the brightness intensification or step down.

  The first time I push the buttons come from the wheel of the brightness on the screen and the watch moves a bit, but brightness does not change. When I push them again the watch moves again a step upwards (or downwards) and this time the screen illuminate upwards (or downwards).

  The replacement screen is not at fault. I think I need to change the inverter on my laptop because it does not provide enough voltage for the matte screen.
  I searched the web for days, but it is impossible to find a reference for the inverter be used with the matte screen.

  Can someone help?

  Thank you.

  To be honest, I put t know if it s a UPS or problem if you simply used and replaced by a screen is not compatible. Who knows?

  But the fact is that all devices (also the FL inverter) and compatible parts can be ordered from the service provider authorized in your country.
  Guys might order the parts directly from Toshiba.

  Call the technicians and ask a compatible converter for this laptop. In addition, you could ask if you used a good LCD.

  Good luck

• Freeze to the Toshiba M35X-S149 on logo screen

  Toshiba M35X-S149 my friend was working fine until today. When it is turned on, it appears to the Toshiba logo screen with "press [F2] for INSTALLATION, press [F12] for boot device selection menu' on the left status bar and"phoenix"to the right of the status bar and freezes. These same keys will not respond and he is now locked.

  I'm a tech, so, naturally, disassembled the notbook looking for something unusual, such as loose connections, bad cables, cold solder joints, etc., but not found anything. It is nice and clean.

  Anyone who has a suggestion?

  Hello

  It is very suspicious, if the user is not able to enter the BIOS settings. Usually in this case it must be something serious. The only thing you can try is to remove the battery for a short time and try again.

  If you have disassembled the laptop have you also tried to remove the CMOS battery?

  Sorry, but I don't see another solution than to contact the partner Service of your country.

• Toshiba Satellite A215-A4757 black screen and unable to initialize

  Received the black screen after trying to download the update of the BIOS; has been logged in as administrator, but received the error 'need to be logged in as an administrator. Could not go further. Process had not begun restore point then minimized and tried to validate the connection as an administrator. Locked screen and got a black screen with errors about bad driver. Doesn't seem to be valid. In any case, I liquidated - power off. Does not power on f11 or any other key - cannot start. Keyboard seems dead. seeing lights to drive DVD could perhaps start with the startup disk. However, do not have (not too smart). Is there a way to get a system of information-based boot disk? I had a previous assignment but did not because months ago. Thanks for any help/suggestions.

  Perhaps your message to: http://forums.toshiba.com/?

• My computer Toshiba Satellite keeps the 'blue screen' and that is to say that it is caused by "a problem with a USB driver. How can I fix it?

  Resolve a problem with a USB driver

  You have received this message because your universal serial (USB) bus driver caused a stop error, also known as a blue screen error. This error means that the computer has stopped abruptly to protect against potential corruption of data or loss.

  What is a driver?

  A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

  The recommended steps that follows can help to eliminate this problem, or at least reduce its frequency. Try them in the order listed. If a step cannot solve or reduce the problem, then move on to the next.

  Steps to fix this problem

  1. Adjust your computer's power settings

     The following power settings may help reduce the frequency of this problem.

     1. Turn off the USB selective suspend setting:

        1. Click on the Start button .

        2. In the search box, type power options, and then press ENTER.

        3. Find the plan selected, and then click change plan settings.

        4. Click change advanced power settings.

        5. Double-click the USB settings , and then double-click on USB selective suspend setting.

        6. Make sure that the USB selective suspend setting is disabled. If it is enabled, click it and select disabledand then click OK.

     2. Disable power saving mode (computer portable computers only):

        1. Click on the Start button .

        2. In the search field, type power options, and then press ENTER.

        3. Under Preferred Plans, ensure that High Performance is selected, and then close the window.

  2. Look for an update of the BIOS for your computer system

     Several computer manufacturers whose computers have this problem published BIOS updates to fix this known issue. Contact your computer manufacturer to see if a BIOS update is available for your computer model.

     What is the BIOS?

     The basic input/output system (BIOS) is software built into a computer that runs when the computer is turned on. Among other things, this software starts the operating system, and supports the transfer of information between hardware devices (such as the keyboard and the monitor).

     How can I find the manufacturer of my computer?

     Click on the Start button , type msinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as the manufacturer of the system in the right pane of the system information window.

     Click here to go online to see the contact information for most of the computer manufacturers

  3. Download and install the latest updates and drivers for your computer

  It's a good idea to periodically check the updates of driver for your computer, especially if you added new hardware recently, such as a USB hub or other USB device.

  What is a USB hub?

  A USB hub is a device with multiple (USB) universal serial bus ports. USB ports are narrow and rectangular connection points to connect USB devices to your computer. A USB hub is used an Extender of port or port replicator, providing more USB ports to run from a USB connection on your computer. USB hubs can be external devices that connect to a USB port, or they can be internal devices built into your computer.

  To check for driver updates:

  1. Use Windows Update to find and install updates:

     1. Go online to Windows Update

     2. Click the check for updates in the left pane, and then click view available updates.

        What happens if I see any updates available?

        • If you see you receive updates: managed by your system administrator, you can try clicking on the link to check online for updates from Microsoft Update or Search online for updates from Windows Update, but you should maybe contact your system administrator to get the desired updates.

        • If you do not see the message above and no update is available in Windows Update after clicking on the link check the updates in the left pane, then the available updates have already been installed.

     3. Select the driver for your device updates and more updates to install.

        Note
        We recommend that you install all Important updates and recommended. These updates improve the security and stability of your computer.

     4. Click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. If you recently added a new hardware device on your computer, go online to the manufacturer's Web site to see if there is an update to the driver.

  3. If you recently added a new program on your computer, go online to the manufacturer's Web site to see if an update is available.

  Steps to work around this problem

  Warning
  These measures are intended to solve a specific problem, but could do so by temporarily disabling or removing some features on your computer.

  1. Try to remove newly added USB devices

     If this issue occurs after adding a USB hub or other USB device, consider removing to see if the problem goes away. If this resolves the problem, contact the manufacturer of the device for the updates or other recommendations.

  2. Do not disconnect USB devices while the computer is to stop or go to sleep

  This problem is known to occur when USB devices are disconnected when the computer is trying to stop or switch mode to 'sleep'. This is common with cell phones, especially those with a docking station, as docking station can act as a USB hub. The frequency of this problem could be reduced by allowing your computer to completely close or completely in sleep mode before detached from its docking station or unplug it or the docking station USB devices.

  If you know which USB device is causing the problem

  It may be possible to prevent the Blue error screen by choosing the option remove the device safely in the Notification area, before putting your computer into sleep or Hibernate mode.

  1. In the system tray, click the icon to remove the device , select the USB device that you think that the origin of the problem and then click OK.

  2. Do not physically remove the USB device.

  3. Perform the action which resulted in the Blue error screen, so that was taken the functioning of your computer after the mode standby, hibernation, or, in the case of laptops, close the laptop computer or place it in a docking station.

     1. If the Blue error screen persists, it is likely that the problem is with another USB device. Try this procedure using other USB devices until you find that at the origin of the problem.

• If the Blue error screen disappeared, you have probably identified the device causing the problem. Contact the manufacturer of the device for more information on how to solve this problem, or use the option to remove the device safely to work around him.

Note
Depending on the manufacturer and model, some USB devices will become available automatically when you resume using your computer. Others will require that first disconnect you physically and then plug back in front, they will be recognized by the computer. Check the system tray to see if the USB device that you removed safely become available when you started to use your computer again. If she did not become available automatically, then physically unplug it and then plug it in again.

This is the screen it gives me. Help, please! If problem fixed, will BE AWARDED!

Hi ChayceSteffiare,

For instructions on solving problems with USB devices, see the following article:

Tips for solving problems of USB devices

To fix blue screen errors, see the following article:

Pick up the pieces after a computer crash

See also:

Optimize Windows Vista for better performance

Ways to improve your computer's performance

• BlackBerry: Data not fully displayed in the screen of BB (version 5.0 Operating System/down) tested on BB bold3

  I have developed an application and it works well on OS6 (OS 6 fat for example 5) but does not work well on OS5 (OS 5.0 or less fat for example 3). The main problem is that I have data via JSON and displays several labels on the screen to display the data. According to the content received via json data can be large, but the main problem is that vertical scrolling does not allow the user to scroll down beyond a certain point. This fact I wonder if the screen in OS5 have little content allowed to shoot her. code snippet below.

  JSONArray json = new JSONArray(result);
  
  for (int i = 0; i < json.length(); ++i)
  {
      JSONObject moleculevalue = json.getJSONObject(i);//get the json data object
  
      String tdescription = moleculevalue.getString("Total Description");
  
     if (tdescription == "") tdescription = "Not Applicable";              
  
     _fieldManagerMiddle.add(new SeparatorField());
     _fieldManagerMiddle.add(new LabelField("Description: " + tdescription, Field.FIELD_HCENTER));
  
  }
  

  Data still exist, but the user cannot scroll under the view of the screen.

  Can someone tell me a work around for this and, possibly, of the reasons for this. Thanks in advance.

  No need for any ZIP code at the moment, as I suspect the issue here is the lack of focusable fields.  Default LabelField is not active.  This can restrict scrolling especially on non touchscreen devices.  This isn't an OS related issue, but touch no touch verses.

  Two suggestions before the validation code:

  (a) to make active the LabelField

  _fieldManagerMiddle.Add (new LabelField ("Description:" + tdescription, Field.FIELD_HCENTER |)) LabelField.FOCUSABLE));

  (b) add a NullField after the LabelField

  Let us know how you go with it.