Toshiba U10 Docking Station causing screen freeze

Similar Questions

• Where can I buy this Toshiba Notebook Docking Station/USB hub?

  Where can I buy this product in the Denmark or in an online store at the Denmark/Europa?

  * Toshiba Notebook Docking Station/USB hub *.

  Product link: http://www.ubergizmo.com/15/archives/2006/07/toshiba_notebook_docking_stationusb_hub.html

  Thank you.

  Danish:

  Kuhu kan jeg kobe ovenstaende USB Docking med 5.1 Dolby Digital? I Danmark/Europa online store?

  Tak

  You will find this Option on ebay or many other online shops. Just look for the Toshiba PA3390E or PA3390E-1MPM partnumber with google or eBay.
  I hope this will help you.
  CU

• PROTECTED R700 on docking station / command screen

  Hello

  I'm on a Toshiba protégé R700 on a docking station and I have problems in installing the screen of the built-in or external.
  Is it really necessary to press FN + F5 to switch the view when the apparatus?

  My scenario:

  Laptop on the dock, using external display
  Stop Windows XP
  Undocking
  Laptop computer startup
  Enter my Login of Win XP on the logon screen
  Built-in screen turns black

  After that I have to press FN + F5 blind or are anchored the laptop to change the setting on my external screen.

  > Is this really necessary to press FN + F5 to switch the view when the apparatus?
  Hmm Yes it of necessary to press FN + F5 to switch back to internal laptop display if you have previously used the external display

  The Fn + F5 switches between the internal and external screen... so you must use this option if you want to reuse the internal laptop display.

• Keep the Dock on one screen

  I want the dock to stay on a single screen however I want to keep active separate spaces I like how windows behave better display in this mode. It's very embarrassing for the docking station edit screens when the mouse is near the bottom of the screen. Or y at - there a way to change which causes the dock to move as make require more than just mouse hovering in the region.

  I tried to use the Terminal scripts before, but they do not seem to work.

  El Capitan 10.11.4

  Thank you.

  Or y at - there a way to change which causes the dock to move as make require more than just mouse hovering in the region.

  Actually, Yes, but it is not so simple. Displacement of the docking station requires that you pull down on the edge of the screen, not just fly over the area from the bottom. However, in practice, it is almost impossible not to put the mouse down there and not continue to move downwards. If you only momentarily on the bottom and then move upward, the Dock does not appear/change.

  I don't know a way to fix the Dock in a single view.

• Docking station for AT270

  Someone at - it experience with a Toshiba Tablet docking station? The "Toshiba Multi Dock with HDMI (for the Tablet Toshiba Thrive). Part - No. PA3934U-1PRP working with excited especially with German AT270-101 tablets?

  PA3934U-1PRP Toshiba docking station seems to be only compatible with the Toshiba Tablet Series 10 "Thrive
  As much as I know there is no special docking station that came specially for the series of tablets of Excite.

  By the way: this page
  3 = All http://www.toshibadirect.com/TD/B2C/afin.to?stt1=tablets&stt2=excite&sttSeries=all&STT & x = 40 & y = 11

  Here you can find all the available options and accessories for series AT200 excite

• What docking station / Port Replicator is compatible for the Satellite P70-A-104

  Hello

  does anyone know what model port replicator (name of Toshiba for docking station?) adapts to Toshiba P-70-A-104?

  Your
  Stephan.

  Hello

  As far as I know that this Satellite has port replicator, so you can use an external device, such as Toshiba Dynadock (universal docking station).
  More info about Dynadock you can find on the pages of Toshiba. As a small preview check please
  http://www.Toshiba.EU/accessories/laptops/docking/universal-docking/pa5082e-1PRP/
  http://www.Toshiba.EU/accessories/laptops/docking/universal-docking/pa3927e-1PRP/

  If you have any other questions you are welcome.

• External monitor like main screen for M200 with docking station

  Hi all

  I have a Tablet M200 with GeForce FX go 5200. I have a Toshiba docking station and an external LCD display. When it is docked, I would use the external LCD as main display and the LCD builtin as the secondary display. (I want the taskbar, icons and newly opened windows on the external screen when it is docked.)

  Unfortunately, I can't find the right combination of settings of this. If I put Windows to extend the desktop on the external screen, "use it as primary display" option is grayed out. I don't get the span horizontally or vertically options in the nView utility, just the Standard and the Clone (and this only if I do not extend to the office.)

  How can I get the external screen be the main while being the internal school?

  Thanks in advance!
  Kind regards

  Levente

  Hello
  What home-unit station use?

  Tablet Multi dock PA3315E-1PRP or Port Replicator advanced III: PA3314E?

  thx for the info,

  Good bye

• Tecra 720cdt: screen is central docking station - 1/2 in.

  Hello

  Ive just took a Tecra 720cdt with docking station, when the 720 is on display of the battery is ok, when the screen docking station is central 1/2 in. I downloaded drivers but how and what driver do I need to use to reset the docking station for produce size full screen?

  Thank you.

  Windy morning

  As far as I know if you use the right display driver should not be a problem. As far as I know, this unit comes with Win 95 and you can find the right driver on the Toshiba download page. What operating system is running on your device?

  Check also displays the properties on the settings tab.

  Good bye

• My computer Toshiba Satellite keeps the 'blue screen' and that is to say that it is caused by "a problem with a USB driver. How can I fix it?

  Resolve a problem with a USB driver

  You have received this message because your universal serial (USB) bus driver caused a stop error, also known as a blue screen error. This error means that the computer has stopped abruptly to protect against potential corruption of data or loss.

  What is a driver?

  A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

  The recommended steps that follows can help to eliminate this problem, or at least reduce its frequency. Try them in the order listed. If a step cannot solve or reduce the problem, then move on to the next.

  Steps to fix this problem

  1. Adjust your computer's power settings

     The following power settings may help reduce the frequency of this problem.

     1. Turn off the USB selective suspend setting:

        1. Click on the Start button .

        2. In the search box, type power options, and then press ENTER.

        3. Find the plan selected, and then click change plan settings.

        4. Click change advanced power settings.

        5. Double-click the USB settings , and then double-click on USB selective suspend setting.

        6. Make sure that the USB selective suspend setting is disabled. If it is enabled, click it and select disabledand then click OK.

     2. Disable power saving mode (computer portable computers only):

        1. Click on the Start button .

        2. In the search field, type power options, and then press ENTER.

        3. Under Preferred Plans, ensure that High Performance is selected, and then close the window.

  2. Look for an update of the BIOS for your computer system

     Several computer manufacturers whose computers have this problem published BIOS updates to fix this known issue. Contact your computer manufacturer to see if a BIOS update is available for your computer model.

     What is the BIOS?

     The basic input/output system (BIOS) is software built into a computer that runs when the computer is turned on. Among other things, this software starts the operating system, and supports the transfer of information between hardware devices (such as the keyboard and the monitor).

     How can I find the manufacturer of my computer?

     Click on the Start button , type msinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as the manufacturer of the system in the right pane of the system information window.

     Click here to go online to see the contact information for most of the computer manufacturers

  3. Download and install the latest updates and drivers for your computer

  It's a good idea to periodically check the updates of driver for your computer, especially if you added new hardware recently, such as a USB hub or other USB device.

  What is a USB hub?

  A USB hub is a device with multiple (USB) universal serial bus ports. USB ports are narrow and rectangular connection points to connect USB devices to your computer. A USB hub is used an Extender of port or port replicator, providing more USB ports to run from a USB connection on your computer. USB hubs can be external devices that connect to a USB port, or they can be internal devices built into your computer.

  To check for driver updates:

  1. Use Windows Update to find and install updates:

     1. Go online to Windows Update

     2. Click the check for updates in the left pane, and then click view available updates.

        What happens if I see any updates available?

        • If you see you receive updates: managed by your system administrator, you can try clicking on the link to check online for updates from Microsoft Update or Search online for updates from Windows Update, but you should maybe contact your system administrator to get the desired updates.

        • If you do not see the message above and no update is available in Windows Update after clicking on the link check the updates in the left pane, then the available updates have already been installed.

     3. Select the driver for your device updates and more updates to install.

        Note
        We recommend that you install all Important updates and recommended. These updates improve the security and stability of your computer.

     4. Click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. If you recently added a new hardware device on your computer, go online to the manufacturer's Web site to see if there is an update to the driver.

  3. If you recently added a new program on your computer, go online to the manufacturer's Web site to see if an update is available.

  Steps to work around this problem

  Warning
  These measures are intended to solve a specific problem, but could do so by temporarily disabling or removing some features on your computer.

  1. Try to remove newly added USB devices

     If this issue occurs after adding a USB hub or other USB device, consider removing to see if the problem goes away. If this resolves the problem, contact the manufacturer of the device for the updates or other recommendations.

  2. Do not disconnect USB devices while the computer is to stop or go to sleep

  This problem is known to occur when USB devices are disconnected when the computer is trying to stop or switch mode to 'sleep'. This is common with cell phones, especially those with a docking station, as docking station can act as a USB hub. The frequency of this problem could be reduced by allowing your computer to completely close or completely in sleep mode before detached from its docking station or unplug it or the docking station USB devices.

  If you know which USB device is causing the problem

  It may be possible to prevent the Blue error screen by choosing the option remove the device safely in the Notification area, before putting your computer into sleep or Hibernate mode.

  1. In the system tray, click the icon to remove the device , select the USB device that you think that the origin of the problem and then click OK.

  2. Do not physically remove the USB device.

  3. Perform the action which resulted in the Blue error screen, so that was taken the functioning of your computer after the mode standby, hibernation, or, in the case of laptops, close the laptop computer or place it in a docking station.

     1. If the Blue error screen persists, it is likely that the problem is with another USB device. Try this procedure using other USB devices until you find that at the origin of the problem.

• If the Blue error screen disappeared, you have probably identified the device causing the problem. Contact the manufacturer of the device for more information on how to solve this problem, or use the option to remove the device safely to work around him.

Note
Depending on the manufacturer and model, some USB devices will become available automatically when you resume using your computer. Others will require that first disconnect you physically and then plug back in front, they will be recognized by the computer. Check the system tray to see if the USB device that you removed safely become available when you started to use your computer again. If she did not become available automatically, then physically unplug it and then plug it in again.

This is the screen it gives me. Help, please! If problem fixed, will BE AWARDED!

Hi ChayceSteffiare,

For instructions on solving problems with USB devices, see the following article:

Tips for solving problems of USB devices

To fix blue screen errors, see the following article:

Pick up the pieces after a computer crash

See also:

Optimize Windows Vista for better performance

Ways to improve your computer's performance

• HP 2008 120W Docking Station (KP080UT) Support screen double

  The Station of host HP 2008 120 w (KP080UT) supports two screens?  If this is not the case, what docking station will be?

  I tried to run two monitors connected to the docking station with a portable computer stock HP Compaq 6715 b.  A monitor is on DVI, the other is on VGA.  Single screen works individually on both DVI and VGA, but together, it won't.  The laptop sees there is a second monitor, but when I said "Extend my Windows desktop on this monitor." the first monitor flickers as its going to change everything, but goes back to the single screen.  I updated the graphics drivers and tried with both open and closed laptop.

  Support Online Chat told me that it depends on the graphics card.  6715 b is not compatible double screen.

• Satellite Pro L670 - 11 d and Dynadock U10 problem re-docking station

  This my first post on this forum - I hope I have the right category.

  We have a user with a Satellite Pro L670 - 11 d attached to a port replicator Dynadock U10 USB.

  Everything seems fine, except when press us the disconnect button (or select eject Dock) the laptop leaves the great.
  However when we try to anchor (for example after a meeting of bureau) it does not recognize the usb connection and docking station won't. We usually have to restart at this point. We are attentive to reconnect to the same usb port.

  Has anyone seen this problem and know a fix?

  Thank you

  David

  Hello

  Have you noticed this problem only under this Dynadock U10 or perhaps with the external USB HDD too?
  In my opinion, it sounds a bit like the issue of the BONE and not like the Dynadock question.

  I would recommend this control by using a USB HDD.
  Connect the USB HDD to the USB port as well.
  Then, disconnect the USB HDD and unplug the laptop HARD drive. Reconnect the HARD drive and check if the HARD drive would be connected again.
  If the same thing would happen with HARD drive, you should check the USB port
  Maybe the chipset driver will need to be updated

  But if the HARD drive is raccorderaient ok and if the question does not seem to be using the HARD drive, then, it would be necessary to check the Dynadock maybe reinstall the Dynadock from the software again.

• Clock freezes in the docking station

  I have the docking of Milestone 2 and recently I found the clock freezes randomly while my phone is in host mode. The separator flashes but the time does not update. This affects the main clock display and the time in the notification bar.

  If I lift the phone out of the docking station or press the power button two times then the time updates immediately. This problem is intermittent, sometimes the clock works normally, at other times, it will freeze. Earlier tonight for example it froze, I lifted it out successor and it froze again. I repeated the process and it works correctly (for now at least). I restarted the phone, but the issue does not appear to be linked to the availability, as I experienced it immediately after a reboot.

  I have seen this issue a few times on the retail firmware, the Milestone 2 was released last year.

  This question seems to have been fixed with the update, which will be published shortly in Europe.

  I will announce when it is available.

• T520: Unable to support more than 2 screens? (via the docking station)

  All,

  I have a problem, allowing more of 2 monitors. My T520 is connected to a docking station that has two outputs digital video that are connected to two monitors NEC.

  For some reason any when I go on Windows | Display settings | It does not allow me to activate all three display at the same time. Can I have one) two monitors on the computer screen or b) + 1 monitor.

  Whenever I tried to connect to the 3 screen, it automatically shuts the screen 2.

  Other colleagues with T420 not experience this problem. The T520 & T420 uses the same docking station so I don't think that is the question.

  My first thought is to update the video driver that I did but still does not. The T420 has a nVidia card while T520 has an Intel processor on board one.

  If anyone has any suggestions that would be great.

  Thank you

  T520 with Nvidia Optimus can support up to 4 screens, while as the T520 with intel only the graphics card can support only 2 screens.

  If you need more screen support on the T520 of yours, you may consider usb2dvi, eGPU, Vidock.

• X 200 with ssd OCZ blue screens at the start of the docking station

  The 200 x blue screens when the startup of the docking station. If I take the laptop to the docking station to start and then once booted dock the laptop is fine.

  The issue started happening when you I upgraded the laptop form a SSD OCZ vertex 2 drive from xp to windows 7 and installed.

  I tried to update the firmware on the ssd using this utility

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806

  The program showed that my ssd was running firmware version 1.29 and that he did not need to be updated.

  I also tried to update the x 200 to the latest version of the BIOS. Nothing seems to work.

  Any ideas or suggestions are greatly appreciated.

  Windows 7 does not start a compatibility. I solved the problem by returning to a mechanical drive.

• Can cause of Google Chrome that any general Windows questions as screen freeze or startup problems? Thank you.

  Recently installed Google Chrome and started to add some PC problems. This could be a coincidence, but I was wondering if the Chrome can somehow interfere with the operation of Windows. Thank you for any light on the topic.

  Hi Anoop,

  Thanks for your reply. I checked the links you recommended, but did not find anything of note when I checked the logs events or performance. (I can't seek enough carefully.)

  Fortunately, the problem disappeared in the past few days and he can not Google Chrome to what has caused the occasional screen freezes. To answer your questions, Frost moved not just with Google Chrome, there is no error message and I have not recently updated the latest drivers.

  In any case, at the moment seems to agree, and if a conflict between Windows and the Chrome is not a good experience then it's probably just a coincidence that I met problems with my shortly after its installation.

  Once again, thank you for your help.

  Kevin.