Technique of Assembly Pseudo-aleatoires?

Similar Questions

• generator Pseudo-aleatoire 511

  I'm kinda new generator Pseudo-aleatoire.  I was wondering how to generate a based model 511 V.52 specification:

  511 (2 ^ 9-1) which is a PN 9

  Primitive polynomial: x ^ 9 + x ^ 4 + x ^ 1 = 0

  Shift register taps: Q9 xor Q5

  How translate the polynomial and shift register taps seed or initial input state?  There are examples out there that I can loook?

  I don't know what level you are referring to (v.52) and cannot open Steve link so it can be redundant (and should be validated with the standard). Hope this helps.

  Note, I have found no sequence to validate this and it might need a bit of tweeking.

  Ben64

• Measures of true bipolar voltage with USB 6008/6009

  The 6008 or 6009 to make true bipolar (positive and negative voltages referenced to GND) measurements?  If not, what is the solution to purchase cheaper data this feature?

  Thank you.

  The question of unipolar vs bipolar vs bipolar Pseudo-aleatoire also was mentioned in this thread.  The 6008 6009 use bipolar-only mode and load the setting differential input or CSR.  Please note that {unipolar / bipolar / Pseudo-bipolaire} is independent of {differential / CSR / Pseudo-differentiel}.

  The 6008/6009 don't use 'Pseudo-bipolaire', which means that each differential input should be positive with respect to the ground.

  Best regards

• What does "error code 39, the device, / Device/CdRom0, has an average of bad block and how to fix it?

  Original title: that means 'the device/Device/CdRom0 has bad block averaging, and how to fix?

  I can not access my CD-Rom.  I get an error code 39.  Can you help me?

  Depending on the circumstances that generated the error, it can mean one of several different but related things.

  1. The drive itself is a failure [replace the drive].
  2. The media in the drive is not compatible with the firmware of the drive. [Go to the decision-makers in car's web site and see if there is a firmware update for the drive - or - if a burning operation, try different media].
  3. Lead to problems of software or registry issues [go to the Device Manager and remove the player.] Restart Windows to reinstall. Remove the upper/lower case filters in the registry. Instructions available on the Internet. Do a Bing or Google search].
  4. Anisotropic Pseudo-aleatoires variability in the matrix of the error of the universe [restart Windows and try again].

  Tom Ferguson

• Web access is mandatory for ePrint for printer LAN?

  I concede that I'm swimming against the tide, but I categorically refuses to connect anything of mine to 'The Cloud'.
  (My WiFi connections have a 63 bytes Pseudo-aleatoires WPA2 AES key for some reason.)

  But everything I've seen on ePrint seems to require that I create a HPConnected.com account (I have two 2 HP OTHER accounts) and main goal of this seems to impose a so-called 'benefits' to 'The Cloud' on me, if I want to that they or not.

  All I want to be able to do is to print to my JO 8630 Pro from my Android phone or my iPAD AIR when in range of my WiFi Access Point.  I don't want to print when I'm away from my local network.  I don't see 'services' in the 'Cloud' I can't live happily without!

  So, what is needed to achieve this?  I searched for clues and returned empty.

  Any help gratefully accepted...

  Hello

  The HP ePrint servier require connecting to the cloud, as it is a cloud of serviece to allow printing from a remote location (beyond your local network).

  To print from your mobile devices, you can use AirPrint, generation of HP in print for Android or the HP ePrint mobile App solutions everyone does not require to register for HP connected to exploit.

  Below, you can all ways to print from an Android device:

  http://support.HP.com/us-en/document/c03679829

  And below for iOS devices:

  http://support.HP.com/us-en/document/c02796271

  For all those, 3rd and 2nd options don't require any account of cloud.

  Shlomi

• JIT - random delay / waiting

  Hello

  How can I defer action in an applet? But should not be a fixed time, the best solution would be a random value. Let's say that + / 5 s...

  If generating a random real has been worth is not possible, some Pseudo-aleatoires value might help. Something like extract a numeric value from No. series router.

  Thanks for the ideas / Karsten

  Although not necessarily random, you can use the parameter msec to see the clock output to simulate a random number between 0 and 5 using something like this:

  Event Manager applet two

  event no

  Action 1 cli command 'see the clock.

  Action 2 regexp ".» * \. ([0-9] +). ' ' * ' $_cli_result ' match msec

  fracture of action 2.5 $msec 6

  Action 3 "random: $_remainder.

  Unfortunately the wait action not accepting a variable as input name if you want to run commands in a loop and have each run at a random second, you would have to create a wait loop before running the command.  Here is an example:

  Event Manager applet three

  event no 60 maxrun

  action 098 puts "loop run 5 times"

  game action 099 County 0

  action 100 all $count lt 5

  action cli 101 command 'see the clock.

  action 102 regexp ".» * \. ([0-9] +). ' ' * ' $_cli_result ' match msec

  action 102,6 multiply $count $count

  action 102.7 multiply $msec $_result

  action 103 divide _result $6

  game action 104 I have "0".

  action 105 all $i the $_remainder

  action 106 wait 1

  action 107 incr I have

  108 action ended

  109 action puts ' expected $_remainder seconds.

  incr action 110 County

  end of the 111 action

  action 112 puts "loop finished."

  This product output such as:

  #ev man run three

  loop running 5 times

  WAIT 0 seconds

  wait 5 seconds

  wait 2 seconds

  wait 3 seconds

  wait 2 seconds

  finished loop

  Thank you

• I get "We cannot verify who has created this file" for each file PPT or PPTX, that I opened on my local network (Win 7 only, not win 8)

  I searched around and I may have missed, but I have a specific problem that just started today (01/04/2014).  I have 3 PCs in a local home network and they all have been sharing things very well so far.  PC1 is my computer main storage support (Windows 7), another is a laptop (Windows 7) and a third is a laptop (Windows 8.1).

  On the Windows 7 laptop, when I open Windows Explorer and navigate my way to a file I want to open (which is stored on PC1) and double-click the file to open it FOR just open using the right program (PowerPoint2007) I fully installed on Win 7 laptop.  Also note that "Microsoft Office (2010)" came Pseudo-aleatoire loaded on the laptop, but I put the default value for all of the PPT and PPTX files to be opened with PowerPoint2007.  I've had a few hiccups in the past where this version not desired, non-fully-loaded trying to help me open files with PowerPoint2007, but right now all files are set to open with PowerPoint2007.

  So I'm not online, I don't use IE, and this is only the case with the PPT and PPTX files and only on my laptop Win 7.  DOC/DOCX and XLS/XLSX files open fine with the 2007 version of Word and Excel respectively.  All files, including files, PPT and PPTX on PC1 are operable without problem on the laptop of Win8 with PowerPoint2007.

  No idea why this would suddenly start to occur?

  Hello

  Thanks for posting your question on the Forum of the Microsoft community.

  Please visit the TechNet forums for the best expertise.

  http://social.technet.Microsoft.com/forums/Office/en-us/home?category=officeitpro

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

  Thank you

• What is the file name {0A34A52C-C54F-41B4-961F-0AB8C0D8F2E5}

  Under the 'C' drive I have marked files {0A34A52C-C54F-41B4-961F-0AB8C0D8F2E5. What are they, where did they come, I can remove them?
  Where is there a good list of names of files and extensions, complete with the system they are generated from, and a description of their basic function?

  It's a file or a folder? Folders with long strings Pseudo-aleatoire for names often remain from a Windows Update that should have been deleted. They can be removed, even if they have permissions issues when you try.

• Why has the price of upgrading 140 pounds more expensive in MS Store as Amazon

  Windows 8 Pro Upgrade is only £49.95 on Amazon but a huge £189.99 from Microsoft Store.  How Microsoft can justify this huge price difference greater.

  Due to problems encountered on Feb. 26. by purchasing the Promo Windows 8 Pro Upgrade at a special price, I always try to get Microsoft in honor of that offer.  I spent hours on the phone to discuss this.  They offered to sell me Windows 8 for £25, but I want the original offer for Windows 8 Pro to honor.  I don't think it's unreasonable.

  Please note the price Amazon if you buy the upgrade because you'd be crazy to buy out of this store.

  Please accept this personal view of the appearance that it is offered. I have no intention of starting a flame war; just to explain the situation, as you described and I perceive it.

  The price of the Microsoft Store is the official MSRP possibly adjusted by discounts promotional which is currently in place. Promotional price structures generally have a period of time that they are good for and expected the same price for days, weeks or even months after the expiration of the promotion is unreasonable, not vice versa. If you could not produce promotional at a promotional price during the promotional period, Microsoft will have to be the final arbiter by selling you the product at the promotional price has expired. FWIW, I don't think there is a lot of existing infrastructure designed for selling products at reduced prices in "special" circumstances

  When you look at the price on Amazon, you don't buy it from Amazon. You buy sellers using Amazon as a listing service. These providers may or may not be allowed to officially sell Microsoft products and some have been known to sell illegal software Pseudo-aleatoire legitimate licenses or outright. It is possible that one or more suppliers may have "stored" at a promotional price that was offered earlier and is now expired. In that case, I'd sure that the license you purchase can be used and activated outside its promotional sale period. Caveat emptor.
  This is my point of view on the subject. I am not a Microsoft employee, have no impact on the sales of product policy Microsoft and volunteer my time here. You should consider my statements and advise with this in mind.

• Position of the object changes with the new layer

  After Effects CS6 11.0.4.2

  I have installed recent updates, according to this page (FAQ: what information should I provide when you ask a question on this forum?)

  10 Pro 64-bit Windows

  I have an AMD FX (tm) - 8350 eight cores 4 GHz processor

  8 GB RAM

  AMD Radeon 200 series graphics card R9

  3rd party plugins installed: 3-d element.

  I have an object made to 3D element bound to a null object to control its movement. The position that there is everything I like. However, when I add a new layer (layer setting, sound, text or other) changes the position of the null object. It comes to a lot of trouble because I use 3d objects and as they occupy a different position, their movement seems wrong.

  I wanted to add an adjustment layer, so I précomposé just what I have and add the adjustment to the model layer, so it does not change. It worked perfectly. But, now, I want to add a new text object, bring it to feature 3D extrude it and bind it to a null object, the problem is that if I add the null object, or the text layer to the original model, the previous objects will change their position.

  I use phrases such as wiggle and time * with the first null object. This has something to do with that evil?

  How can I solve this problem?

  Thank you

  Yes. The seed of wiggle() and other Pseudo-aleatoires functions is obtained according to the index. You must manually set a seed with seedRandom (< your="" value="" here="">, true) to avoid tampering. This is nothing unusual.

  Mylenium

• How does the connection to the server the user allocation decisions

  I have read the reference floating 5 for desktop view stateless Architecture and a question that I was hoping someone could help me with.

  http://www.VMware.com/files/PDF/view/VMware-stateless-virtual-desktops-ref-arch.PDF

  In this reference architecture, you have a floating pool of assignment that spans multiple hosts.  You the size of the pool with a number max of desktop computers and office at the front.  Given that each host of ESXi has an identical local data store size, and each database is configured with the storage even approve the setting, composer supply workstations evenly over the data stores on a weighted space available.  I have it.

  However, if a user is entitled to a pool of floating offices that spans multiple hosts with local storage (not), how the connection to the server to make decisions about which the virtual desktop user is affected?  CPU, memory, number of assigned... VMs?  Round robin?  I have 100 jobs virtual per physical server pre-configured on several hosts.  Connection to the server will affect the first 100 users on host1, host2 100 users...?

  Thanks in advance.

  The connection to the server will choose a VM Pseudo-aleatoire to the list of machines available and responsive if the user gets a new session. A pool of virtual machines is assumed to be essentially equal and a single compute cluster resource, you can count on DRS for the cluster automatically spread the load between the hosts autour. In practice, what makes very little difference vs picking inspiring heuristic load, such a unique desktop VM will vary a lot in terms of memory and cpu consumption during a user session, and it is best to let the existing algorithms decide rather than managing them.

• Script to change the BIOS VMX. UUID value?

  Due to how transfer us models of VM to stand-alone ESXi 4.1 guests before their junction to vCenter, the UUID for the models come out the same. We use Veeam Backup to restore the templates, so they can be compressed enough to fit on a DVD.

  I'm looking for a little PowerShell script that can define a custom BIOS. Value of UUID for a VM named on ESXi 4.1. 1002403 KB VMware has a Pearl script that allows you to do this, but we are a store of PowerShell and would make it easier for us to customize in the future. Ideally, the script would generate a UUID Pseudo-aleatoires without user intervention. For example, to set the last six digits to use the current month, day, and minute (MMDDMM, for example 100111).

  vCenter will create of course unique UUID for our production of VMs, so it's only to manage the initial models, that we download to standalone servers in "factory".

  Ideas?

  Try something like this

  $vmName = 
  $newUuid = 
  
  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec
  $spec.uuid = $newUuid
  $vm = Get-VM -Name $vmName
  $vm.Extensiondata.ReconfigVM_Task($spec)
  

  Note that the call to the method it is more simple forms, not waiting for the completion of the task, no error checking.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Memory of consumed active vs

  First of all I apologize. I realize that there were many topics regarding the measures of memory. I did find something that deals with what I saw.

  I pulled a copy of memtest86 + on machine virtual system allocated 16 GB of RAM. The host has no other running virtual machines.

  The performance table shows assets but only about 6 GB consumed about 12 GB. I was under the impression that consumed memory would always be the highest metric; How is it possible to have the highest active memory?

  When memtest86 + is running, he began to write some data Pseudo-aleatoires

  ... If the data model texts is the same, these pages of comments will be

  sharing the same physical page due to the transparent page sharing.  In your

  case, 6 GB contains the same data model and can be seen in "shared".

  registered"in the performance table.

  Please check below link for more details

  http://www.VMware.com/support/developer/VC-SDK/visdk400pubs/ReferenceGuide/memory_counters.html

  I hope this helps...

• Encrypted voice over RTMFP

  Hello

  I'm the voice messanger encrypted coding. I heard, that its flow in NetStream is encrypted by the symmetric key algorithm. Is this true? If this is the case, where it is generated? Is the exchange of keys between peers based on smth like SSL (secure public key algorithm Protocol)? I want to make sure that no one can access this symmetric key. I would appreciate detailed information about encryption of transmission (graphics, technical references) because I am preparing studies on this subject. Thanks in advance for your help.

  Here is the information that we / i have disclosed in the past. I'm not able at the moment to share more.

  all packets are encrypted with AES-128-CBC.

  AES encryption keys are derived using Diffie-Hellman with a main module of 1024-bit (RFC 2409 MODP Group 2) end-to-end.

  all certificates of client Flash RTMFP include their public key DH used in the agreement of key-to-end.  the "peer ID" (NetConnection.nearID) is the SHA-256 of the certificate hash.  private/public Diffie-Hellman key is chosen at random for each new NetConnection using cryptographic Pseudo-aleatoire number source of the platform (for example/dev/urandom).

  This construction makes customer Flash ID approved tamperproof.  only one NetConnection in a client Flash operation can normally never have an identifier given by the peers.  It is only possible to have a network successful connection between two peers of customer if these peers have the private keys associated with their public keys.  an attacker masquerading as other peer can copy the certificate but not the private key, so the network connection will cannot succeed (since the attacker can not calculate the shared secret Diffie-Hellman that goes with the connection between the peer two IDs and therefore cannot calculate session AES keys, waiting for the other end).

  the nearNonce and the farNonce are also derived from the Diffie-Hellman shared secret and is known only for the two endpoints.  they are secret and impossible to forge.  they can be used as cryptographic challenges in the handshakes of application layer.

• How to install an STK applet on the SIM via OTA (over-the-air)?

  Dear all,
  What I'm trying to do is to load and install an applet by sending (live) from the same sequence of direct orders of APDUs GP wrapped in orders of the envelope.
  The direct sequence sequence is to select issuer security domain, the initialize update and external authentication before loading and installation. However, 03.48 does not specify these steps of safety management. Does this mean that load and install commands can be sent without prior authentication?

  Hello

  You could try implicit initialization of secure channel. If you have SCP02 maps with i = 44, 45, 54 or 55 (GP Card Spec 2.1.1 change M), you can use a well know challenge card Pseudo-aleatoire to open the secure channel. This means that you can precalculate the channel secured without direct access to the card.

  See you soon,.
  Shane