Tecra 500 CDT does not start. Please help with CP

Similar Questions

• Torch 9800 blackBerry Smartphones does not start, please help

  My father was a game in his torch, then he suddenly crash like button works / stop does not work he removed the battery and reinsert it, after that bb keeps on restart loop I tried starting it works then I ask him to remove the application that does crash after reboot I can't transcribe this safe mode and the phone always reboot loop After downloading Director of office of BB I tried to connect the blackberry it recognizes torch 9800, but there is nothing I can do about it. After searching a bit I found "common files" apploader folder might help so I took the opportunity to remove the other app, still does not work in the end, I use apploader /resettofactory to reset the device, it shows a white screen with a bar saying wiping files. After reaching 100% and restart my phone still in restart loop. What should I do now?

  Thanks before

  Hello and welcome to the community!

  You really need get in Mode safe mode again so that you can reload your operating system. You would have gotten lucky that first time with the right timing on the keystrokes... Keep train... I remember it taking a lot try until I'm a model to go properly in Mode without failure.

  Otherwise, these articles may be useful:

  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

  Good luck!

• my audio does not work please help

  my audio does not work please help. Thank you!

  Hi no thanks,

  1. What is the brand and model of your system and sound card?

  2. when the problem started?

  3. did you of recent changes to the computer?

  You can try to run the sound troubleshooter and see if it helps.

  No sound in Windows

  For more information, you can also consult the following article:

  Tips for solving common audio problems

  Hope this information is useful.

• Hi my audio - pc does not work please help me

  Hi my audio - pc does not work please help me

  Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

  Resources:

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• Muse does not start! Help, please!

  Adobee Muse does not start. Messege apears: cannot validate the subscription of Muse.

  What is going on? I paid my subscription!

  Kind regards

  Peter Bouritius

  Hi all

  There are currently maitenance done on one of the servers for authentication.  Unfortunately, it takes a little longer than expected.

  For the moment, we hear this will be up within 60 minutes and I will if it appears that time will change.

  I apologize for the inconvenience, and we will seek active in a way to better communicate possible breakdowns for you in the future.

  See you soon,.

  Justin

• 2006 iMac does not start. Help restore

  I have an Intel iMac core duo with iSight and built in disk drive around 2006. It does not start.

  When I turn on, it sounds and passes to the gray screen with the apple logo and a progress bar or a spinning wheel. Then he stops down. I tried all the troubleshooting and nothing works. In addition, I don't have the disks that originally from cane with the computer. So I can't make a diagnosis of the hardware. (Unless someone is willing to sell me their album hehe).

  This problem happened to me in 2012. I had a friend restore the computer to empty the hard disk, then boot from the snow leopard disc and reinstall everything. It worked like a charm.

  In 2013, a disc is stuck in the drive. I have troubleshooted only and nothing has worked. I assumed that the drive is dead and has continued to use the computer without worrying about that. Then, in 2014 someday when I restarted, the disk jumped! I never tested the drive then because I was afraid of another stuck disc. Then, the computer is dead again as he did in 2012.

  SO I know what to do. I need to wipe the hard drive and start over. However, I didn't have a drive. So, I bought one on eBay. When I insert it, the computer enters the disc. I can hear the mechanics works. It ejects even properly. However, I can't boot from the drive. When I start the iMac by pressing option, I don't see the Macintosh, no disk drive.

  My hard drive died? If so, a USB dvd drive would work? If USB does not work, how can I replace the drive?

  Is it possible that I bought a drive bad or fake software and that's why I can't boot from the dad?

  Please help in some way!

  Try a boot sure try safe mode if your Mac does not end commissioning - Apple Support

• Tecra A11 - 11N does not start after upgrading CPU

  Hello

  I would like to do an upgrade of the processor for my Tecra A11 i5 - 430 M 11N to a probably much faster i5 processor. I thought that the i5 - 580 M'd, but the laptop does not start when I installed this processor.

  I started the 430M, done some research on the internet and discovered that the 580 M has a very high FSB speed, and that is what probably does not work / not compatible with my machine.

  http://Ark.Intel.com/products/43537/
  http://Ark.Intel.com/products/49653
  http://Ark.Intel.com/products/49652

  and also http://ark.intel.com/

  Now, I went back to the computer store, returned the 580M and got an i5 - 560 M compared to its specifications as I've seen it would not compatible because it has the same speed of the FSB with the 430 M.

  I then later in the day tried to install this cpu as an upgrade, BUT alas!
  It STILL does not START ALSO.
  I was dumfounded left. The processors in the same line of the family are supposed to be compatible between them provided: lithography, FSB and socket type are similar.

  Or what I'm missing here?
  I did upgrades of CPU in many cases for desktop computers and laptops, and this is the first that has left me with no word to say!

  Please offer assistance or advice.

  Simon

  + The message has been modified.

  Hello

  Recommend to check this doc from Toshiba:

  + Can I put th CPU, screen, or motherboard in my Toshiba laptop? +
  http://APS2.toshiba-tro.de/KB0/FAQ35006D000RR01.htm

  Upgrading the CPU is not supported (officially).
  The point is that, even if the chipset would support the new processor, it would be possible that the laptop wouldn't start because of compatibility problems between the BIOS or other components on the motherboard and the new processor.

• Tecra M4-S435 does not start

  My Tecra M4-S435 will not start.
  When I turn it on, all I hear is a quick check of the DVD player, a hum of hard drive and fan.
  I don't see anything on the screen at any time. I tried an external monitor and still see nothing.

  Is this a failure of hard drive, the screen failure or something else?

  > That could tell if pulling the battery for 30 minutes he gets to start? (I have not tried with my original Tecra, but I will soon... I just have to put a hard drive in it first...)

  I m not very well, but I guess that the BIOS would be defined default value that could help solve this problem.
  I had this similar problem with my Toshiba laptop not and the same workaround helped also

• HP 500-281: does not start a 2nd drive cloned in sata1

  HP 500-281 desktop

  Win 10 home

  BIOS MEMv80.22

  Short version of the latest issue:

  Fine Win10 after upgrade to 10 at the start of the hd0 in sata0 slot (original). HD1 in sata1 slot is a new clone of HD0 (Win10, using Reflect). HD1 and its files in Windows more HD1 is seen in the BIOS. If the boot order is changed in the BIOS will not start (sata1 above sata0), saying "no boot disk. Boot order reset default (sata0 and sata1). If the HD0 data cable is disconnected, does not start, once again "no boot drive" Boot order is reset by default. Cable data Sata0 off HD0 and HD1-connected, with no data connection to HD0. Now, she starts to HD1. How to start the HD1 connected to sata1 with or without HD0?

  Greetings,

  UEFI is ruthless.

  The cloned drive should be connected to the port SATA (SATA0) where the source drive has been connected.

  The cloned drive does not start on the SATA1 without modification.

  See you soon!

• a necessary component of windows media does not start Please restart windows media

  When I try to read 'My Favorites' in Windows Media, I always get the box that says I have not implemented yet and I'd like to, I'm going through so pick up options I want to choose Save then I get the error mssg that says "a necessary component of windows media does not load please close and restart Media Center. When I tried to find out which component was missing I got mssg that "Windows Media center is not available for this version of Windows" Whats up with all this?

  When I try to read 'My Favorites' in Windows Media, I always get the box that says I have not implemented yet and I'd like to, I'm going through so pick up options I want to choose Save then I get the error mssg that says "a necessary component of windows media does not load please close and restart Media Center. When I tried to find out which component was missing I got mssg that "Windows Media center is not available for this version of Windows" Whats up with all this?

  1] start the system as an administrator .

  [2] make sure that Media Center is closed.

  [3] open the command prompt and type in the following commands it. Each time, press ENTER after the command.

  regsvr32 jscript.dll
  regsvr32 vbscript.dll
  regsvr32 wmp.dll
  4] reboot the machine.

  5] restart the Media Center.

• my vista does not start! Help!

  Vista does not start on my computer compaq laptop. After a vista update automatic :(

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Firefox does not start .oam file with scrolling parallax effect and if y > 740

  Hello!

  I try to explane my problem. If I place a parallax scrolling page of a lively .oam file, the .oam file does not start (as in firefox!) if the file is higher than y = 740 and if the animation with a scrolling parallax effect.

  Maybe just visit this site, you can see the problem. Please look with firefox!

  http://OAM-test.BusinessCatalyst.com/index.html

  I placed three times exactly the same oam-file with the same scrolling Parallax effects, but with different positions only y

  in safari and IE, no problem. but the third CAO does not start in firefox.

  any suggestion?

  by the way... Why firefox cannot load fonts in the oam file?

  Thank you very much in advance for any help. really need a solution as soon as possible. If there is no way to do it with oam-file perhaps another format without flash (gif)?

  Kind regards

  Ivo

  To work around the problem, you can configure initial field scroll to 1, it works with the third file oam.

  Thank you

  Sanjit

• MacBook Pro glued on the gray screen and does not start. Help, please!

  Hello

  My 13 "MacBook Pro (mid-2009), running Snow leopard (10.6.8), has finally given up and won't start.

  I tried to boot into SafeMode several times, but the loading bar does not move and the laptop just completely stops.

  I also tried to boot in single user mode with the command fsck - fy, but this results in the following:

  disk 0 s 2: I / 0 error

  Invalid node structure

  (4,35296)

  * The Macintosh HD volume could not be completely checked.

  / dev/rdiskOs2 (hfs)

  You leave with signal 8

  I guess that means that there is something wrong with the hard disk and some corrupt files?

  My problem is that I have no time machine backups, so I would like to know if it is possible to do something to get to the top and running.

  That, I do not have an external drive with my main important files and photos on a failure, so is it possible to completely erase the computer so I can sell it at least?

  I really need help on what I've been driving myself crazy trying to figure it out!

  I'm not all techniques with regard to the material. I tried doing research and have seen things, which suggests that I should reinstall the OS X, this would imply in the disks provided with the laptop when the power?

  Any advice greatly appreciated!

  Boot from the DVD and run the check/repair disk utility and repair permissions until you get no errors.  Reformat the hard disk using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Then re-install the operating system.

  When you restart, use Setup Wizard to restore your data.

• Z500 Lenovo does not start. Help, please!

  Hi guys! First time on the forum. I recently got my lenovo Z500 a few months ago and it's a great laptop. However at night last he simply stopped working. While I was just surfing the Internet Windows started does not. It got to the point where I had no choice but to turn it off. When I turned it back on it rest on the start screen, and nothing happens. When it starts the fan is silent and then in a bit of overdrive. My friend is of the opinion that it is a problem with windows 8, but unfortunately it won't even let me do a safe mode boot. F8 does not work and my only chance was to F12, but unfortunately, even if it brings the option of boot and I can select the screen goes black and stay like that. Thank you very much in advance for anyone who can provide any help!

  Malarkey_ wrote:
  My apologies if I'm a little in every sense. Unfortunately I am very amateur when comes to computers. How can I go about starting the recovery media in the USB port? Once again sorry if I melt your brain. I don't have a clue haha.

  In fact, you have several options:

  1. you can call Lenovo and request to do the repair if your camera is still under warranty.

  2. If you don't mind losing any of your data and custom programs, you can try to restore your system back to factory default by pressing the NOVO button (located next to the plug) while the unit is turned off. Select a recovery key and choose restore. You can read the details by downloading the user guide and go to page 23. Links: http://support.lenovo.com/en_US/detail.page?DocID=UM016744.

  3. USB recovery media initialize.

  4 etc.

• BlackBerry 8800 Smartphone, symbol of the battery with a red line through it. Does not start. Help, please!

  I recently bought a 8800 and when I inserted a battery, I got was a battery symbol with a red line through it, on a dark screen.  I changed the batteries, tried to charge it via the USB port and a wall outlet without result.  I tried cleaning the contacts and tried to download t a new OS, but it does not recognize the phone when it is in reality.    I am at the end of my rope with this phone and can't figure out what else to do.  It is just gone? Please help me

  Clipboard?

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

  It might not work. You should try a connection with JLCmder 20 to 25 times, as well with the battery and the battery.

  See what's happening.