Tecra 8200: After SP2 computer laptop installation keeps rebooting

Similar Questions

• WiFi on Tecra 8200 after installing XP SP2

  I am running XP service pack 2 on a Tecra 8200.
  The problem is that the wireless card cannot detect any wireless router.
  I use a belkin G wireless router and it works, checked with another pc with a wireless card.

  However the toshiba wireless client shows no wireless network, the router or another computer.

  I have the antenna turn on and how to configure a wireless connection.

  I tried the old drivers and tried a number of drivers out of this site and others.

  But I had still not everything yet, does anyone else have this problem or a solution to this problem

  Hello

  If you use a client for a WLAN connection WLAN Windows settings SHOULD be disabled. Please check under properties network connection Wireless wireless networks tab.

  There is an option called use Windows to configure my wireless network. This option SHOULD be disabled (without hook).

  Good bye

• computer laptop VAIO keeps restarting

  I bought my computer laptop sony vaio (model SVF15318SNB windows 8TM) April 2014 but on the month of August I have encounter a problem even now the laptop itself keep restart displaying the vaio icon but after restart 5 times or less he launched little windows. Fortunately, windows doesn't crash at all, but after 10 or 30 min it stop and restart itself. So, I look at sony nursery they check the Ram system, control the fan unfortunately, they do not find the specific target, they said that maybe it's the operating system that is causing the problem. Thus, they recover the windows. After recovery, the laptop works fine without problem. But after a few days the problem occur.so I take a recovery action after that and that during the system recovery itself close and restart this worst case is that the windows driver is impossible lock to update the system everything is lock

  I also ran the RAM, hardware scan both he could not find any error. Furthur consultation for the vaio Center care havnt done yet.

  So if there are suggestions please post and I will appreciate it.

  Hello Vishwaschangamayum,

  Thank you for believing in us giving the opportunity to help you.

  I can understand the level of frustration through which you are going. As you mentioned in your post that the problem began in August. Thus, there could be a chance that the problem originated on the Windows Update, released by Microsoft in the same month, as many customers were faced with the same question.

  These types of errors usually occur with a blue on the computer screen, when a serious problem causes Windows 8 to stop or restart unexpectedly. There are several reasons why this type of error occurs on the computer. They occur generally when there is some driver problems in the computer. However, it can be also a few other software/hardware reasons.

  Please refer to the suggestion provided by rvuerinckx replied on August 15, 2014 in the following thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/blue-screen-Stop-0x50-after-applying-update/6da4d264-02d8-458e-89e2-a78fe68766fd

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Re: No sound after that computer laptop Satellite P100-160 wakes from sleep

  I have a Satellite P100-160 running Windows 7 32 bit. At the beginning the sound works normally, but after a period in mode 'sleep' there is no sound - all the indicators show the green bars on the rise and fall as if working normally.

  If restarting the laptop the sound back up to an additional period in mode "Eve". There is also no sound through headphones if plugged. I uninstalled the driver and allowed the computer to automatically download the latest driver.

  Can anyone suggest a solution?
  Thank you very much.

  Since when you noticed this strange problem?
  I have way since you installed Win7 or later?

• Computer laptop G62 keeps freezing

  For the last two days, my laptop G62 - 227 CL keeps freezing once I used it for about 5-10 minutes.  It freezes completely - no cursor movement or response to all keys.  In addition, it freezes any programs I am running.

  However, I am able to use the computer in Mode safe mode with network without any point of freezing (so far; I was in Mode without fail for about 30 minutes).  Unfortunately, I need to use MS Word, which does not work in Mode without failure.

  I use the computer entirely on the current because the battery is pretty much kaput.  Could be the problem?  If so, I'm confused as to how the computer can operate in Mode without failure.  I can't afford a new battery, so I hope that there is just some sort of software problem.

  Is there some kind of diagnosis I can run who can tell me what is the problem, or if anyone else has had this problem?

  Thanks in advance for any help.

  Hello

  You are welcome

  From your description of the issue and the HARD drive error code, it seems that the player is running out - is one of the reasons for which a failing drive will run in Mode safe because it experiences less load (in terms of read/write) when Windows is running in this mode.

  The first thing I recommend is to back up all your personal files etc so that you always have access - lack of readers can be unpredictable.

  Once completed, see if the following is helpful at all.

  Start in Safe Mode, click the Start Menu, click computer, left click Local disk C once to highlight, right-click on Local C drive and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  Right plan the audit on the next reboot of the system, and then restart the laptop - this process can take several hours before the load in Windows.

  If there is no improvement real time this is over, it is probably time to think about replacing the HARD drive - if you want a guide on this procedure, please let me know.

  Kind regards

  DP - K

• IV of the lost files after that computer laptop had made the recovery of the PC

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  On the 02/02/2011 23:30 my laptop (HP Pavilion dv6000) went into hibernation, so I turned on me back to laptop and this message came [system could not reload the last location] asked me to recover the laptop.
  So I did it by using the second keys F11 after hitting the power button and it went to a screen that says [PC Recovery]
  so I followed what it says on the screen and in my view, he also said that he would remove all of my files IE: my pictures my videos my music... etc. So Iv me recovered laptop and iv lost all my files and bookmarks how do all, can someone help me on this you and all this is on windows XP pack2

  Try a search-start-search-type in for example my photos my music etc. and run

• Reinstall Windows 8 Pro w/Media Center after flight computer laptop

  I recently had to replace my Toshiba laptop computer because my old one was stolen. The new machine came with Windows preinstalled 8.1, and I can't reinstall Pro w/Media Center. I did a cover of flash player for my old machine. The recovery media were made after I upgraded to Windows 8 Pro w/Media Center. So, my question would be, should I use this recovery media to return to my Windows 8 Pro w/Media Center?

  Hello

  Unfortunately, you will not be able to get the Media Center from old computer to the new computer using a flash recovery drive. You can contact technical support for Microsoft Store for assistance on this issue.
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_Us

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• Computer laptop itself keeps turning off

  Hello

  I was wondering if someone could help me if they have experienced the same problem.
  My laptop has recently started to fade, it is connected to the network so I don't think it would be the battery, but when it turns off, it shows that the light orange low battery, is it the battery or is it something to do with the laptop itself?

  Thanks for any help!

  Hi Jo,.

  The usual cause of sudden power thresholds is overheating. It's chacterised of the laptop just lose all power with little warning (other than the cooling fans running at full speed). This can be corrected easily enough by sucking just any dust or debris on the aspiration air grilles with a vacuum hose.

  If the laptop goes off in a more controlled manner, then this could be a fault in the electronics of power supply which causes the cell to run on battery, even if the AC adapter is plugged in. In this case, the problem may reside with the AC adapter itself, with the connecting cable, or with the plug located on the back of the laptop.

  Kind regards

• Get error after loading cloud creative Installer keeps telling down load the file I did it 5 times always says Error re download

  I have a new mac pro and want to DL the creative cloud I pay but keep problems trying to get installed it on my new system.  tells me to DL again and again as there are some I have a new mac pro and want to DL the creative cloud

  Hello

  Please see the link below for this question.

  • New application Cloud Creative unusable: it is empty!
  • Re: Empty opening creative cloud app

  Hope this will help you.

  Kind regards

  Hervé Khare

• My computer windows Vista keeps rebooting itself. I get a BSD, and it then restarts another BSD, etc...

  I get the following when I look at the details:

  Problem event name: bluescreen

  OS version: 6.0.6002.2.2.0.256.6

  Local ID: 1033

  BCCODE: a

  BCP1: C05C6000

  BCP2: 00000000

  BCP3: 00000000

  BCP4: 820D57AD

  View of the BONE: 6.0.6002

  service pack: 2.0

  product: 256-1

  c:\windows\minidump\mini011813-33.dmp

  c:\users\brandi\appdata\local\temp\wer-93194-0.SysData.XML

  c:\users\brandi\appdata\local\temp\werccfe.tmp.version.txt

  The machine is warm to the touch.

  Any ideas?

  I get the following when I look at the details:

  Problem event name: bluescreen

  OS version: 6.0.6002.2.2.0.256.6

  Local ID: 1033

  BCCODE: a

  BCP1: C05C6000

  BCP2: 00000000

  BCP3: 00000000

  BCP4: 820D57AD

  View of the BONE: 6.0.6002

  service pack: 2.0

  product: 256-1

  c:\windows\minidump\mini011813-33.dmp

  c:\users\brandi\appdata\local\temp\wer-93194-0.SysData.XML

  c:\users\brandi\appdata\local\temp\werccfe.tmp.version.txt

  The machine is warm to the touch.

  Any ideas?

  =========================================
  The system can be overheating... the following links may
  a few ideas:

  A recent problem of overheating was due to the absence of heat
  composed on the CPU... the OP took the computer to a
  knowledgeable tech who has diagnosed the problem and applied
  the compound to the CPU... and solved the problem.

  How to apply thermal paste to a CPU
  http://www.YouTube.com/watch?v=o7rPqCvCt0g

  Detect and repair a computer overheating
  http://www.computertooslow.com/overheating-computer.asp

  Clean your computer tower
  http://www.computertooslow.com/clean-computer.asp

  How to clean the inside of a computer case
  http://www.technibble.com/how-to-clean-the-inside-of-a-computer-case/

  Why my Toshiba laptop suddenly stops by itself without warning?
  http://www.laptoprepair101.com/laptop/2006/01/04/Toshiba-laptop-overheating/

  How to stop laptop overheating problems
  http://www.computer-Adviser.com/stop-laptop-overheating.html

  Laptop overheating problems - the easy cure
  http://EzineArticles.com/?laptop-overheating-problems---the-easy-cure&ID=1269144

  The following links are offered for general information
  and monitoring to help determine if your system
  is overheating.

  What temperature should turn my processor to?
  http://www.computerhope.com/issues/ch000687.htm

  Two free utilities for the temperature monitoring:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  HWMonitor
  http://www.CPUID.com/softwares/HWMonitor.html

  Core Temp
  http://www.alcpu.com/CoreTemp/

• Tecra 9000: After installation of SP2 Yamaha audio driver does not work

  Hello

  I have a Tecra 9000, with a Yamaha AC - XG sound card.
  The problem is that since I installed Windows XP with SP2 included, I lost my sound.

  I also know that Toshiba is aware of this situation and they managed to post a solution for this. I tried this solution:

  Detail:

  Yamaha AC - XG driver used the PortCls function to check the version of the operating system. XP Service Pack 1, PortCls function is changed, while the Yamaha rider cannot get operatingsystem version correctly. The operating system provides the Windows 95 version. This is why the operating system has a blue screen. That's why Microsoft has added that the solution and the clandestine drivers cannot work on SP1. This problem also happens to Windows XP SP2.
  Yamaha provides already the fixed driver Toshiba. The fixed driver version is the following;
  yacxg.sys 6.13.10.2152 with software synthesizer
  yacxgc.sys 6.13.10.3152 free software synthesizer

  How to solve this problem:
  Install the fixed driver on a system before and after the installation of Windows XP Service Pack 2.
  Install as follows:
  (1) unpack a file attached to your hard drive.
  (2) to start the INSTALLATION. EXE
  (3) click on the next button.
  (4) select ' Yes, "I want to restart my computer now" and click Finish.

  A toshiba engineer told me that first of all I need to install the old driver "5.12.01.3141", and it worked ok, but still no sound.
  And then he told me to install the "6.13.10.2152" version, but it didn't. I got the error message "the driver was not installed.

  I already tried many different drivers, including generics and the yamaha riders.

  Please tell me a good solution for this problem if possible.

  Thank you very much
  Hugo

  Hello

  Do you get the CD of Windows XP Home edition without SP (or perhaps including SP1) facility somewhere? Tecra 9000 is old enough laptop model (6 years) and maybe you should start installing OS like original recovery image.

  Install Windows XP without SP home edition and configure all hardware components. After doing this update to SP2 brand. Maybe this order facilities will help you to have BONES works.

• Tecra 8200 - what computer laptop model number should I?

  All top
  Can someone tell me how do I know what model I have? I try to download the drivers for my computer, but am not sure which series / model it is.

  I have the following information on the basis of the machine:

  TOSIBA Tecra 8200
  Model No.: PT820E-05WQT-E
  Serial No.: 61276516 G ST820-0

  It is a Pentium 3 machine, but is - this one: has / M / R / S series? So what model to choose after that please?

  Thank you.

  Your Tecra is simply Tecra 8200 and there is no other model number.
  Download the drivers, you can find on Toshiba page under http://eu.computers.toshiba-europe.com > support & downloads but under product type, you must choose option ARCHIVE.

  You will then find option for Tecra 8200.

  Good luck!

• Tecra S1 problems after SP2 installation

  I have a problem when I use SP2 on my Tecra S1. After you install SP2, my pc crashes when I use the function 'stand by' or 'Hibernate '. It comes with a conflict of interrupt on irq 11 and begins to restart again. Whenever the pc starts again, the blue screen appears with the problem to irq 11 and the program that does, it apears at the bottom of the blue screen, should be "gv3.sys. I did al updates on ' information to update the driver for Windows XP with Service Pack 2 - v1.1.pdf ", but without success. The pdf file say I need to update the driver power saver to version 1.00.34M version, but I can't find it on the site. I use the Dutch version of WXP and the only driver I can find on the Web site is the 1.00.32M version and the English version is the 1.00.34M, so maybe that's the problem. I tried with a clean version directly from the restore CD but I came up with the same results.

  Who can help me to fix this, or point me in the right direction.

  Hello
  you are absolutely right! The 1.00.32M version is the most recent for your machine (for the Netherlands).

  Do not irritate cause there is a version higher than for other countries. The functions are equal.

  Try again with this version and keep us updated, please!

  Good bye

• BSOD Kernel_Data_Inpage_Error, now after the upgrade to Windows 8.1, computer laptop keeps auto restart

  Original title: Kernel_Data_Inpage_Error on Windows 8.

  Hello
  A few days ago my laptop continued to restart on its own, turning to a blue screen with a message saying: "Kernel_Data_Inpage_Error". Given that this happened that the sound no longer works on my laptop, I tried to update my laptop to Windows 8.1 to see if that could help solve the problem, but when he started to install my laptop itself restarted each time.
  Do you know what I can do to fix this?

  Please get back to me on that.
  Thank you.

  Mitch

  It works

  First thing.  I would update to win 8.1 when you have solved the problem

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & victory (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

• No sound from Port Replicator NetDock after installing XP on Tecra 8200

  After a recent accident, I re-installed my 8200 using XP SP2. Now I have no sound from the Netdock. All other functions of the DS seem to be OK.
  I downloaded the latest drivers Yamaha for XP SP2, but still no sound.

  I get no option to change analog output on the control panel of Yamaha. Device Manager lists system Yamaha DS + XG Legacy Sound (WDM) and Yamaha DS - XG PCI Audio Codec (WDM) as well as other codecs, gane and multimedia control device port.

  I want to get her back through the Netdock.

  Thank you

  Pete

  [Edited by: admin August 10 05 19:30]

  Hello Pete

  One of my friends has a Tecra 8200 running Windows XP Home edition, but SP1and everything works correctly. I really don' t understand why the its doesn't work.

  Sorry, but this unit is not supported for Windows XP Home edition, and it is not easy to say why the Board its doesn't work properly. If all goes well, another forum user has more experience.

  Good luck!