Computer laptop G62 keeps freezing

Similar Questions

• Computer laptop G62 won't boot disk boot

  Need to recover the computer.  I ordered a HP boot disk.  The drive arrived and my laptop G62 reserve not boot disk.  I checked the bios and it is configured to boot from the CD.  I also started in safe mode and cannot locate an autorun exe when I start Solution Explorer.

  Basically, my computer has been hijacked by a nasty virus that has completely taken over my PC.  If I start I see is an empty office and a start menu, can't even get a run prompt.  The virus disguised as anti-virus software and trying to make me pay for their software suite $ 90 to "fix" the problem.

  If I hit F11 at startup upward, recovery stops and I get a blank screen forever.

  Any suggestions?

  Hi, Courtney:

  Try it free Kaspersky rescue CD.

  This disc will get rid of viruses like those and the good thing is that you don't need to be on Windows to run it.

  It is a bootable CD (what you do from the file transfer) and by using the GUI (GUI), you can scan your PC for viruses and remove them.

  Link and instructions below:

  http://support.Kaspersky.com/viruses/RescueDisk

  Rather than modify the boot order, just start the notebook and at the beginning of the HP welcome screen, press the F9 key to launch the start time menu.  Select the DVD-Rom drive, and then press the Enter key.

  You should then see a message on your screen that says basically: 'try to boot from DVD... ". Press any key to boot from the DVD... »

  Press a button and the DVD or the CD should start up.

  Paul

• computer laptop VAIO keeps restarting

  I bought my computer laptop sony vaio (model SVF15318SNB windows 8TM) April 2014 but on the month of August I have encounter a problem even now the laptop itself keep restart displaying the vaio icon but after restart 5 times or less he launched little windows. Fortunately, windows doesn't crash at all, but after 10 or 30 min it stop and restart itself. So, I look at sony nursery they check the Ram system, control the fan unfortunately, they do not find the specific target, they said that maybe it's the operating system that is causing the problem. Thus, they recover the windows. After recovery, the laptop works fine without problem. But after a few days the problem occur.so I take a recovery action after that and that during the system recovery itself close and restart this worst case is that the windows driver is impossible lock to update the system everything is lock

  I also ran the RAM, hardware scan both he could not find any error. Furthur consultation for the vaio Center care havnt done yet.

  So if there are suggestions please post and I will appreciate it.

  Hello Vishwaschangamayum,

  Thank you for believing in us giving the opportunity to help you.

  I can understand the level of frustration through which you are going. As you mentioned in your post that the problem began in August. Thus, there could be a chance that the problem originated on the Windows Update, released by Microsoft in the same month, as many customers were faced with the same question.

  These types of errors usually occur with a blue on the computer screen, when a serious problem causes Windows 8 to stop or restart unexpectedly. There are several reasons why this type of error occurs on the computer. They occur generally when there is some driver problems in the computer. However, it can be also a few other software/hardware reasons.

  Please refer to the suggestion provided by rvuerinckx replied on August 15, 2014 in the following thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/blue-screen-Stop-0x50-after-applying-update/6da4d264-02d8-458e-89e2-a78fe68766fd

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Computer laptop G62 couldn't update drivers AMD

  As it is said, my laptop G62 went update the Bios and drivers and it says update failed. I tried to update again, but he says no update available. History shows a failure. Any advice? Thanks in advance!

  A link to the pilot available & software download here.

• Computer laptop G62 lights fan but without screen or full charge

  My G62-a03SA does not start correctly, when I press the button to power the fan starts strong and the power and light of the Internet light, but seeing Internet remains orange turn off turning white which is usually done on start up. Then the fan stops as if she has not turned on and after 10 seconds turns very quietly running.

  The lights remain the same and the screen never lights just stays black.

  Help?

  Hello CPlume64. I understand that you are experiencing some problems getting your computer from starting properly.

  Have you noticed if the SHIFT CAPSLOCK or Numlock lights blink? If none of the two flashes then it indicate a specific problem. Thus, if one blinks then how many times it blinks?

  To start working on your issue I suggest that perform you a hard reset. This forces everything to be reset and can solve a wide range of issues. Try the following.

  1. Turn off the laptop.
  2. Remove the battery and AC power.
  3. Press and hold the power button for 15-20 seconds, three times.
  4. Replace the battery and AC power.
  5. Try to start Notepad and post the result.

  I'll keep an eye out for the results of this reset. I wish you a nice day!

• Tecra 8200: After SP2 computer laptop installation keeps rebooting

  Hello.

  I am running Windows XP Pro in my Tecra 8200 and decided to install SP2 (oh error) now, whenever I turn it on I go as far as a blue screen with the following message
  STOP: c0000135 {Unable to locate component}
  This application has failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  After my laptop keeps restarting - boots - blue screen again. I have tried everything to connect to windows to uninstall SP2, but I can not connect.
  I tried to change the boot sequence (some ppl said that it was starting in LAN), I disabled the CPU Cache and L2 in the BIOS and still nothing. If I turn off reset on the failure of the system (as some other guy suggested) I just can't not anywhere either.

  Unfortunately, I do not have the boot floppies so I can not format the laptop.

  Now I know why that is happening, but the answers I get is to uninstall SP2, update the Bios, or to download patches, but I can't make one any of them because I can't get into windows, even in safe mode.

  Someone at - it ideas?

  Hi Hector.

  If you cannot start in safe mode, and then unfortunately mode your only real option is to reinstall your operating system to the original recovery disks.

  I think something went wrong during the installation of SP2 and this has led to the corruption of one or more of your system files.

  I also recommend that you take a full backup of your system before attempting to do a re-installation of SP2 so that you do not have to depend on start-up in Windows to regulate if necessary.

  Personally I take a picture full backup to an external hard drive using Norton Ghost before applying any big maintenance work on my own laptop.

  HTH

• Computer laptop HP DV6 freezes when on the power of the battery, for the most part using Firefox. Looking for help in debugging

  Is there anywhere I can look to see what is running or happening when my PC crashes?

  BACKGROUND:

  My PC has been freezing more frequently lately.

  It seems to happen more often when I am on battery, usually when I am online using Firefox my default browser.

  I tried checking the event viewer, but did not find much, and do not know, I am interested in the right part.

  I can say without a doubt it happens when it is on battery power, almost never when it is plugged.

  In addition, it seems to happen more frequently when I use Firefox, but then I'm usually just surf when I'm on battery.  When I don't really work, I tend to sit at a desk and connect.

  Here are my specs:

  HP Pavilion dv6-3120us laptop

  Product number: XG871UA

  OS: Windows Home Premium Service Pack 1

  Browser: Firefox Chrome for the most part, other times

  I'm starting to capture when / where it happens the more frequntly in a strive to locate the problem.

  I'll try to turn off Firefox addins / extensions as a first step, but would like any other tips.

  Thank you!
  Ian

  I did a quick check this week, surfing on the battery while using Firefox, I fell two times.  Once run it normally, first with all add-ons disabled.

  When I switched to Chrome I had any problems.

  I'll close this and call it a problem of Firefox, I'll open a new ticket if it appears elsewhere.

  But I'll check the both battery test.

  Thank you!
  Ian

• Computer laptop G62 crashed and now it gives error "unable to open because of the recent hardware or software error"

  I have a new problem with my PC. My laptop suddenly crashed. It was working fine before this, but while I was watching a movie, it's just off. I tried to restart but it gave me the error that it cannot open because of software or a hardware error. It gives me two options: 1. to try the Startup Repair tool. 2. to open Windows normally.

  I tried to open it normally, but it redirects me to startup repair. The Startup Repair is unable to do anything.

  =================================================================================

  Startup Repair can try to restore your computer to an earlier point in time when it worked correctly.

  This repair will not personal data change, but it can remove some programs that have been installed recently. You can't undo this restoration.

  =================================================================================

  Then I tried to restore my PC to a previous restore point, but it won't let me continue once I've selected a point. It only shows my C drive which is grayed out so I can't select and continue. It gives me a yellow warning saying that the Protection of the system disk must be enabled.

  So as the restoration is not an option, I went to the recovery of the system where it will restore my factory settings, deleting all data. The problem is that I have a lot of valuable data in the PC, so I don't want to do this before you have a back-up. I tried to make the back-up, but the first back-up was arrested at 78%. The second he stopped at 13%. After that all other attempts to create a backup stops at 25%.

  I don't understand what to do. People say it's a problem with Windows 7 (64-bit). I don't have a Windows 7 CD either because it was pre-installed when I brought. I have an original CD of Windows Vista so I'll try to install first. Then, I'll try to copy my data and then restore my laptop to its factory settings. I hope this works.

  A guy suggested to replace the names of readers. So I reversed the C drive and D drive. He showed me all the readers in the restore option. But the restore has failed. Then he renamed automatically drives to their original state. I even ran sfc/scannow, but it shows me that a scan is planned and restart the PC to start. But when I reboot, it gives me the same thing again.

  Please suggest what to do...

  I installed Windows Vista professional from the CD. It worked perfectly... I want to say that I was able to retrieve all my data because it stored in a folder called Windows.Old

  But since I could not the wifi adapter and integrated graphics card Intel to work on the PC, I tried to restore factory settings. It doesn't let me access the Recovery Manager by pressing F11 on reboot I went to the computer icon and right-click on it. I selected manage and made my recovery disk a partition active. So after reboot it properly started the Recovery Manager. Right now I'm it back to factory settings. I'll let you know what happens after that. My data is safe, but I don't know if I'll be able to load my original OS.

• What docking station for use with my computer laptop g62-b50sa?

  Hello

  I know that this is not a fault, but I was trying to find out which USB, docking station would not compatible with our G62-b50SA laptop and surprisingly difficult to do. Is anyone out there using a dock with this model and if so, which? Any help gratefully received.

  Hello

  G62 series laptop doesn't has not therefore docking port you can use 'docking station' referred to in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=useCategory&LC=en&DLC=en&cc=us&product=4326468

  and few are in the following link:

  https://www.Google.com.au/search?q=HP+USB+docking+station&hl=en&rlz=1G1GGLQ_ENAU282&PRMD=imvns&source=Univ&TBM=shop&TBO=u&SA=X&EI=eypHULukKKWRigfHkYH4Bw&SQI=2&ved=0CCgQrQQ&BIW=1920&BiH=988

  Kind regards.

• Error 90 b when startup on computer laptop g62

  I recently did not use my computer for several days. I started it upward and then made a few hw and shut down. The next time I went to the Tower on I got and error 90 b. I already disassembled and cleaned the fan, but I still receive the message. The fan works from time to time, but stop just at random. What can do fix a question?

  It looks like the fan is a failure, that is, the fan is dying.

  You can try...

  After checking the fan is clean,

  It is recommended that you try a Hard Reset to this problem.

  Depending on the cause of the failure, it may solve the problem.

  Hard Reset allows you to solve problems of software and hardware

  Another document on the subject covers what you did - take a look to make sure you don't miss anything:

  The fan runs constantly, the PC is running more slowly than expected and generates heat .

  ==================================================================================

  You cannot run the computer without a fan, at least not for very long.  The laptop turns off to protect against catastrophic damage (severe).

  You must address this problem.  This means that you should at least replace the fan, assuming that it is the central point of failure.

  The exact solution depends on the root cause.  You must either risk yourself, take the computer to a repair shop that you trust, or call HP and ask them to fix it for you.

  Contact HP

  Good luck.  I hope that you get your laptop fixed.

• Computer laptop itself keeps turning off

  Hello

  I was wondering if someone could help me if they have experienced the same problem.
  My laptop has recently started to fade, it is connected to the network so I don't think it would be the battery, but when it turns off, it shows that the light orange low battery, is it the battery or is it something to do with the laptop itself?

  Thanks for any help!

  Hi Jo,.

  The usual cause of sudden power thresholds is overheating. It's chacterised of the laptop just lose all power with little warning (other than the cooling fans running at full speed). This can be corrected easily enough by sucking just any dust or debris on the aspiration air grilles with a vacuum hose.

  If the laptop goes off in a more controlled manner, then this could be a fault in the electronics of power supply which causes the cell to run on battery, even if the AC adapter is plugged in. In this case, the problem may reside with the AC adapter itself, with the connecting cable, or with the plug located on the back of the laptop.

  Kind regards

• Computer laptop HP G72 freezes on the bios screen after installing a replacement battery.

  After you have installed a spare battery, my G72-259WM freezes on logo screen or bios of HP. If I tap to shut down the pc, unplug the unit and remove the battery. Then, re-insert battery the pc boots fine. When I stop still, I have to go through the same process. I tested the memory strips to be good and have replaced the HARD drive (the original had questions) to a WD Scorpio Blue 500 GB. Everything works fine once the pc is started. Is it due to being of a batterty of spare parts? or is there anything else that might be causing it?

  Its quite possible that battery is causing this issue since it has never occurred before the battery. Use this link to run a self test on the battery: test of a hard disk by using the Built in Self Test

  Let me know what results you get from the test.

  Thank you
  Sean

• Computer laptop Sony Vaio freezes when playing games or watching videos or do something for about 3 to 5 seconds

  I have a sony vaio leptop with windows 7 as operating system... recently I faced a problem when playing games or watching video or do anything on the leptop it frezzes for about 3 to 5 seconds, that again, this works well, once again after 2 or 3 minutes later it frezzes for a long time... for this problem I can't do anything on my leptop... is it Please helpme...

  Original title: windows 7

  If it's a total freeze for the 3-5 seconds, check your hard drive for errors

  probably a bad sector happened where a common used file TSE

• Computer laptop G62-457DX will not be able to DISPLAY or load Windows

  
  

  Hi Sparkles1,

  Yes, I have reviewed the information and you know what, I saw the check of memory again following the instructions to test only 1 stick of mem module. I thought well, why not try something different. Who knows...

  I removed the module from memory slot B and repositioned it back to slot A and let the other Module memory for location B of the equation altogether and alto, the laptop came to life. I booted up and it works terrible on 2GBs. Audible sound horrible, he had committed an error initconfiguration.xml failed in a program and all that is slow and a few delays throughout the manueverability and the battery is red and it says No battery is detected but you know what, I'm happy. I went into MSconfig and stopped all these processes from running at start up like Skype, adobe and a crowd of almost everything except most of the pc. I then stop the pc and installed MS 20 updates, but I had to manually start the PC to complete updates, and even if it is slow slow and makes noises of crap, it works and updates are completed. I noticed that the particular memory module has a red sticky film through the chipset and not on the legs of gold. This red movie looks like coke or pepsi once he has splashed and dried on a table, 4 or more hours. This kind of wet/sticky. I noticed that it looks to him in light. I touched and it is sticky, almost wet. So as long as I can safely clean the module that I think he will be OK, is there a good manual process for this? If I can't find a good electronic plastic resistant more own which is highly recommendable/suitable, then I'll replace it with the exact same type or more stick of DDR3 memory Module. I bookmarked this thread for more information because this is the best forum which covers a huge amount of information. I thank you for your time and your help for this.

• How can I reset my BIOS password on my computer hp G62 laptop?

  Please note that I tried the 'normal' procedure or standard used to reset my BIOS password and I noticed in many other positions, this computer (laptop G62) maintains its BIOS data even after removing the battery from the room.  I also tried to short-circuit drivers who appear to be linked to the battery to remove all ability and that did not help either output.
  
  If someone has successfully cleared the password for this computer model or an employee of HP with knowledge or the wisdom of how to do it, please let me know.  My computer is beyond his support a year date and therefore a tax will be assessed should I call Tech Support and therefore would be too grateful for any help.

  Thank you - Glenn

  PS:
  Seems to me that it must be possible for the owner of the PC knowledge.

  Welcome to Pi-Boss. Try.

  34738299

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.