Tecra 9100: The cover is broken and TFT is dead

Similar Questions

• How can I recover my windows vista serial, the tile is broken and im missing a few numbers... __i lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No.

  How can I recover my windows vista serial, the tile is broken and im missing some numbers...
  I lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No. my laptop if you need if you can help me please write me * address email is removed from the privacy * thank you

  If you had not reinstalled Vista, we helped you recover the product key of Vista for running old, Vista activated using specific programs.

  But, as you have wiped the hard and reinstall Vista, we will not help you recover the product key.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Using recovery disks is normally not need to insert a product key.

  See you soon. Mick Murphy - Microsoft partner

• Tecra 9100 - BIOS block 1 damaged and the update of the BIOS?

  Hello

  I have an old Tecra 9100 with years of quality service, and it is my first problem, but is a great, after a forced restart the display shows the message BIOS 1 damaged block. I tried to fix the BIOS upgrade to the latest version I found, the 1.6 one, but it is a version of Windows (to upgrade a Toshiba computer I think) and when I try to run it in another computer to generate a floppy and upgrade the BIOS drive, I can't, because a common message from modules of Toshiba.

  Its there any floppy BIOS image - archive I can download to perform the BIOS update the BIOS?

  Thanks in advance.

  Hello

  All you can find is stuff on the Toshiba support page. I don't know where you live, but try to contact nearest Toshiba authorized maintainer.
  They have access to the database of Toshiba and they can get it for you. Call and ask for help. I'm sure they will help you fix this BIOS.

• I tried to remove and reinstall Lightroom 5 and have the same problems. I was chatting last night and got a reinstall. This me the shortcut is broken and when I open it directly it asks me my serial number. I did that last night.

  I got Lightroom successfully to open, it does not show my SD reader. I added the reader SD (folder) and it opened some pictures, but then opened an old catalog. I tried again and got grey thumbnails with correct Canon file numbers but not images. When I chose import, he opened an old catalog and began to convert it. I recently had the creative cloud subscription and I can open these photos here after pinning.  The problem is, I don't have the time to understand Photoshop until I need these photos.

  What do you mean that you can open photos "after pinning? Could you please try to specify your problem a bit more? One thing I can tell you, is that you can not activate creative Lightroom of the Cloud with a serial number. There is no serial number for the creative cloud version. It must be installed from the application cloud Creative Manager. You will need to uninstall Lightroom and then reinstall it from the application manager. Other than that, please explain in detail and more clearly what your problem is.

• Component button Power on the motherboard has broken and I was wondering if I had to replace the whole motherboard or just that one piece

  Aspire v5-122p-0408. The component on the motherboard power button broke and I was wondering if I had to replace the whole motherboard or just that one piece

  Hello

  For more information about this, please contact Acer Support, ask in the Support Forums or ask your local Computer Repair Tech.

  http://community.Acer.com/T5/discussion-forums/CT-p/boards

  See you soon.

• I bought the Tablet and the screen is broken

  I bought my tablet to United Arab Emirates: shopping online
  The screen is broken and what can I do for that

  Contact as soon as possible, explain the situation and ask for replacement.

• Problems of its Tecra 9100

  I have reviewed all 54 pages of messages of the Forum TE and Tecra here and found only one that relates directly to the issue I'm having. He titled "Tecra 9100 major sound issues" and has been locked, unaswered with the last post on 21 July with some response on the use of a new pilot.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13809

  I recently bought two used Tecra 9100 (guarantee is expired, unfortunately) and they are both in great shape. I couldn't be happier with them, but alas, the sound came out on one. I checked through all the General solutions, Device Manager, reinstall drivers, purchase new sound card on eBay, test with a sound card in the other system of work...

  I tested the drive with a 16 MB SD card and a 1 GB card, of which none were detected (even though I updated the driver for that also).

  Installing the driver for the card his Yamaha returns a warning message telling me that "the driver has been installed not."

  I cleaned all contacts with alcohol and q-tips several times.

  There is no device not recognized in Device Manager.
  The OS is a new installation.
  The BIOS is updated to the latest version (ver 1.60).

  If there is someone tha can you please help me to diagnose more this problem I would be very grateful.
  Thanks to a bouquet.

  Hello

  According to your link that you have posted, the detachment was answered.
  The noise problem was caused by the installation of SP1.
  However, you have bought a second hand units and changed the cards his etc.
  Sorry, but no one knows what you have done on your laptop.
  I found that this unit has been delivered with a YAMAHA YMF753 sound chip.

  In addition, the SD card slot supports are not all sizes of SD card.
  Additional it doesn t support MMC and SD-card/o

• My ENVY 17-j092nr Notebook PC flicks or vibrates randomly on the log screen Windows and other software

  Im a pc user ENVY 17-j092nr Notebook PC (windows 8.1 with all the drivers) and the OS updates works very well, however sometimes im getting an annoying error that allows windows vibrates like crazy, the problem is a little weird to explain, it makes the BAR on explorer.exe folder flick and other executives 'content' of several software Firefox for example the top bar which is orange starts helpeless flick, or in vlc, it even move, and then the worst on the windows log screen, which makes my movies quick photo from the left to the centre several times per second, making it impossible to write any Password and its annoying when especilly simple pass off work (problem happens very often, but I'm not complaining here).

  The thing I've tried:

  -Change of mouse and video installation, screen, mouse and other dirvers in addition to their update.

  -With the help of build of Windows and external software trouble and repair ultilities.

  Updtading - OS (why? dk but I tried alternatives).

  -Electricity disconnection when this occurs (as sugested in other forums), did not work.

  -Clean the fan and avoiding any external particle on the laser mouse.

  Well well, not that im complaining about the laptop, which work very well over a budget, like it, it's just that the error which bug my HP to be good (if not perfect) experience, please someone help on this im looking forward to HP service work to help me fix this problem for good, is really annoying, especially when you try logging thx.

  I'm not Dunidar thank you for you time to grow another, I opened the cover of portable and yes I found a few in there, dead ants cleaned that upward I don't mind much about warranty or anything like that in any case thank you for your attention, you did a wonderful job help here , the problem has not demonstrated again the science I did it this morning so I think the ants where to do this kind of electric bridge I guess I DK much to this topic but, once again, thx for you excellent support cheers.

• WLAN on Tecra 9100 - LED should go orange if the s/w keyboard shortcut NOT installed?

  I bought a Tecra 9100 that had been restored to XP SP1 and without good Toshiba utilities that most drivers seemed to be OK - for example screen OK but USB has been 1.1 until I added the Intel Chipset drivers.

  I can't get the WLAN card to work by sliding the switch (close microphone) - also, it does NOT appear in Device Manager. I spotted a post below (which was locked) where Pedro said WiFi hotkey software must be installed to make it work. Two questions:

  1 if the s/w keyboard shortcut IS NOT installed should always be able to mount the light Orange / appear in Device Manager
  2. is there an alternate download site because I tried 20 times in the last 15 hours at: http://support.toshiba-tro.de/tedd-files2/0/cmod-en-20070925121500.zip (for the common modules) and the site just seems to be 'dead' - nothing is received at all

  Thank you very much in advance - I want to become a happy member of Tosh' club... Cheers, Brian R.

  PS; The Tecra has a WiFi tag on the bottom and even a MAC address and I have not yet looked for nothing changed so much material.

  Pedro post follows:
  + Hello +.

  + Is the map original WLAN or you have upgraded on your own? What is with Device Manager, this is the card of wireless network which are listed there? +

  + For the use of WLAN, there are few requirements: +.
  + WLAN switch must not be broken or defective.
  + Wireless network card must be compatible one.
  + The WLAN antenna must be connected correctly.
  + Wireless network card must be installed properly (the right driver must be installed) +.
  + Wireless network card must be enabled in the Device Manager.
  + Wireless network card must be activated using the FN + F8 key combination (Wireless Hotkey V2.0.0.1 must be preinstalled) +.

  (1) first you should check if there is a yellow exclamation (unknown device) in device under network adapter Manager.
  If you find any unknown devices in the network adapter section then your laptop was not equipped with WLan minPCI card!
  The shortcut key has nothing to do with the WLan card status in Device Manager! The keyboard shortcut software only controls the function FN + F8.

  (2) don t know what you mean! The functions of link!

• Tecra 9100 comes on intermittently and turns off after 10-15 seconds

  Referring to a Toshiba Tecra 9100, model No.: PT910E-602SF-FR

  The power button normally doesn't light up at all, even if sometimes it starts normally, starts to load windows, then always turns off after 5 to 15 seconds in any case.

  It always requires the batteries very well, but it won t turn on. I ve checked the ram, hard drive and I re - set the default bios - nothing prevents to cut if you can get it to turn on.

  Any ideas what could be the problem? Any help appreciated, it s the second time I had - the same problem the last time!

  Thank you

  Hey,.

  Have you already tried to clean the fan? Maybe a lot of dust blocking the fan for laptop can start t, and then turns off itself due to a higher temperature. It would be interesting to try to clean it.

  But in my opinion, you've done everything you can do, and it looks like a malfunction of the motherboard. If cleaning using fan doesn t I think the motherboard is faulty or something else. If you are familiar with the disassembly of the laptop, you can try to fix it yourself with second hand parts. Otherwise it s time for a new laptop I think

• Maximum size of SD card and HDD in Tecra 9100

  Hello

  What is the biggest size SD card and HARD drive in a Toshiba Tecra 9100?

  My largest SD card has 512 MB and works very well. Can I use 2GB or 4 GB SD - Cards?
  My HARD drive is 160 GB and works. We may also use the 250 GB HARD drive?

  Best regards

  Wolly

  Hello

  The Tecra 9100 is an older laptop. I think that it s 6-old.
  As far as I know 6 years ago you didn t find the cards of 2 GB or 4 GB SD so it's not easy to tell if the slot will handle these large sd cards.
  The user manual only says that you can use SD cards of 8 MB, 16 MB, 32 MB, 64 MB and 128 MB.
  You have only one chance to see if a larger SD card would work. You must test it simply. ;)

• Tecra 9100: I want to use the same settings in all user profiles

  I use it on a Tecra 9100 (if it matters).

  Is it possible to export my settings (best for all profiles at a time), to copy it to another windows user? and any other laptop Tecra 9100? I work with two user accounts on my laptop (one for businesses, a private), I did all the settings as I want, but in the other user account, it comes with factory settings, so I guess that these settings are stored for each user separately.

  And if it's possible, I want to copy the settings for laptop computer to my colleague too.

  Hello

  I have gift? t know exactly what settings you use, but as far as I know just administrator have full control over the tools pre-installed and utilities. As an administrator, you can give an administrative access level.

  On the copy on another machine I can't tell you much, but I guess it must be configured individual.

• Tecra 9100: Unable to connect external monitor to the APR III Plus via DVI

  Hello
  I have a laptop Tecra 9100 that I try to use with an Advanced Port Replicator III (APR3 +) to connect to an LCD flat screen widescreen Dell via the DVI connector, but so far without success.

  All other connections on the APR3 + operate without problem, the monitor stir however not until Windows finishes loading, how it shows a totally white screen with black bars very close down vertically.
  I upgraded to the latest version of the BIOS and tested all the cables, but in vain. I also carefully searched from Toshiba Web site, but the only document which deals with taken ports supported on the APR3 + I can find does not list my laptop model at all.

  Please can you tell me if this mode of operation is supported and if it is how to enable it?
  Alternatively, if it is not supported, could I use a VGA - DVI cable to connect the APR3 + LCD flat screen?

  Concerning
  Ross.

  Hello

  I see that you have updated the BIOS. I think that it was not a bad idea, but you also need to check if you have installed the latest version of TOSHIBA Mobile Extension 3.
  I don't know if that helps, but please check.

  How to check the current version of TOSHIBA Mobile Extension 3
  -Select Control Panel in the start menu.
  S ' please click on ' Add / Remove Programs "from the control panel.
  -TOSHIBA Mobile Extension 3 for Windows XP V3.xx.xx.XP"appears in the list of software to ' Add or Remove Programs".
  -If the current version of TOSHIBA Mobile Extension 3 installed on your computer is V3.19.00.XP or more, please upgrade to the new version V3.21.00.XP.

  How to upgrade the TOSHIBA Mobile Extension 3 to version V3.21.00.XP
  -Uninstall the current version of TOSHIBA Mobile extension 3
  -Restart the computer.
  -Download the new version, unzip it by running, and run "Setup.exe" from the compressed file.

• How to use the CD of diagnosis of the engineer for Tecra 9100

  Anyone who has used the engineer Tecra CD diagnostic for the 9100 (or any other model if they are similar)? I was able to acquire the CD and have been able to recover part of the diagnostics to run tests starting at BACK 6.22 and the tests directly to the release of the CD. There is probably a "correct" way to use this CD but I have no documentation.

  Specifically, I'm trying to diagnose his painful card problem - it is not recognized by Windows and I can't install the Yamaha riders. I basically JUST replaced on this laptop and still no sound.

  All in ALL, I mean: two mothers (upper/lower case); map its (three different cards!); CPU - what else is one that can be connected to the sound?

  Anyway, if anyone can give some guidance on the diagnostic use of the engineer Tecra 9100 CD it would be greatly appreciated.

  no_bones

  Where did you get this CD of engineers?
  I m scared but in my opinion these CDs are not intended for common use of the user and, therefore, you will not find many people who has experience with those CD.

  But it would be very interesting to know how to get this CD

• Tecra 9100 does not supply power to the top

  Hello

  I got Tecra 9100 laptop computer and you have a POWER PROBLEM.
  Basically, it got stuck at the start of the OS and I was unable to click or move the mouse to do something. So I held the power button to turn it off. I do not turn on again entered game coz I had to go somewhere.

  So when I tried to move THE next day and he won't power upward. I can see a GREEN LIGHT but can not hear any CPU, the FAN, the monitor or the hard sound. When I connect to the AC adapter, I can see the LOAD LED but nothing else seems to be powered.

  I also tried to replace the memory Module, but still won't power upward. I guess that the motherboard does not have to be ABLE so nothing is turned. But the one thing that I do not understand why the POWER LED on (GREEN LED) is on, unless it has the power source.

  Can someone tell me what I need to do?
  Help, please

  Thank you

  Hi Sonia,.

  I suggest that you try to remove the battery and power supply so that all power of the laptop is turned off. Reconnect AC power and try to turn on the laptop. If it works, then re-install the battery. I think that the electronics of power sometimes get "stuck" and this procedure usually receives smooth them.

  If the unit still does not power on after having tried the above procedure, then I suuspect there must be a problem of internal material in which case you must take the device to a partner of Service authorized for rectification.

  Kind regards