Tecra A11 - 127 - XP Driver is missing

Similar Questions

• Sometimes I can not start my Tecra A11-127

  Hello everyone,

  I have a question.
  I have a toshiba Tecra notebook a11-127 with a problem.
  Sometimes, I can't not start up the computer laptop and sick he had to take out the battery, wait a moment and put it again and it will start again as it should.
  Any ideas how this can happen?

  So I need to take out the battery and put it again before it will start...

  GRT
  Sjón

  Hello

  It's not easy to say why this happens, I had this problem in the past, but only once
  I've updated the BIOS, and since then, the question only did not appear
  But I don't very well if this was related to the BIOS m

  However, you can try to update the BIOS (if new version is available)
  Update the display driver can be useful too especially if screen turns black during start-up of the device

  Greetings

• Tecra A11-19th - touchpad driver for Win 10

  Anyone know it if there is a driver for this model of Toshiba touchpad and when can we find? If there is not, is there a chance that it will be provided?

  A11 is not supported in Win10.
  Windows Update can find a compatible driver.

• Tecra A11 - 005 00K for SCCM OSD mass storage driver

  I need to know the Tecra A11 mass storage driver so that I can laydown XP WIM of images using the SCCM task sequence. Well, any help would be appeciated.

  I tried the driver Intel ESB2 SATA AHCI Controller but need the correct model in the pilot. (IE. Intel ICH7R/DH SATA AHCI Controller)

  Thank you

  You can get the provider and the device for me id?

  You can get this by going to your device manager, the device in question, right-click, select Properties, click details and select the hardware ID from the drop-down...

  copy beyond what is inside of her and post here and I'll see what I can do...

• Tecra A11 - cannot start the BIOS update

  Hello

  I downloaded the latest update of the Bios B2.50 - EC1.80 for Tecra A11-127 (PTSE0E. Wenn I start installing, an error occurs: "this computer is not supported", but my laptop is an A11-127 with Partnumber PTSE0E, why it doesn't work?

  Why is he not possibel to download an old Version of the Bios?

  JSpindler

  Hi jspindler,

  The question is why you want to update the BIOS? This update should be carried out only if it of really necessary. In addition, only the most recent update of the BIOS can be downloaded as it fixes most problems.

  In any case, you need to start the BIOS as an administrator and you should decompress all files from zip archive before start you. Also, make sure that the value added package is installed.

  By the way: what operating system is installed?

• Tecra A11-125 - driver for Windows 7 missing installation

  Hey,.

  I have a new laptop Tecra A11 - 125 TeachIT.

  I downloaded an ISO of Windows 7 (x 64) file with my MSDNAA License.
  I created a bootable Windows 7 USB flash drive to install it on my new laptop.
  However, after it starts perfectly and I click on the "install now" - button, the Setup program starts and a few seconds later the "install Windows - choose the driver to install" appears accompanied by a popup with the following text: "load a driver - a required CD/DVD drive device driver is missing.» If you have a driver on floppy disk, CD, DVD, or USB flash drive, please insert it now.

  Note: If the Windows installation media is in the CD/DVD drive, you can remove it safely for this step. »

  I don't know what driver is missing.

  Can someone help me solve this problem?

  Thank you very much

  Daniel

  Hi Daniel,.

  > I downloaded an ISO of Windows 7 (x 64) file with my MSDNAA License.
  Have you also tried another version of Windows 7?

  A friend had me exactly the same problem and after searching a bit with Google, he founded to recreate the Windows 7 disc. Therefore, you must use the latest version of your burning program and burn the disc with low speed. Latter is very important!

  I recommend also using high quality like Verbatim media.
  Disks that you used?

• Need driver 'Wifi' for my Tecra A11 - 1 9

  Hello

  I have a Toshiba Tecra A11 - 1 9 PTSE1E.

  I need the wifi driver and can not find. The Web of Toshiba site does not recognize my computer with serial number.

  I need help, thank you.

  If you can't find the drivers by using serial number please look for it manually.
  All the drivers, tools and utilities that you can find on http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  I can't get it for you because I do not know what operating system you are using.

• Tecra A11 - 1F4 (PTSE0E-OM6052EN) which XP AHCI driver?

  I am trying to install the drivers for XP on a Tecra A11 AHCI;

  I have a ghost image that loads on this laptop in compatibility mode in the BIOS and I try to update the driver for the drive in AHCI controller, restart & change the disk to AHCI mode in the BIOS.

  That's what I usually do for HP laptops, we have, and it works most of the time.

  Storage power Toshiba drivers are in the form of an executable that will only work if you have AHCI enabled, how anyone runs in compatibility mode supposed to use these?
  They don't even extract driver files, you can use only the .cab files and an installer.

  I have listed in the device under IDE ATA/ATAPI controllers Manager;

  Intel (R) 5 Series/3400 Series Chipset Family 2 port Serial ATA Storage Controller - 3B2D
  Intel (R) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller - 3B 28
  Primary IDE channel
  Primary IDE channel
  Secondary IDE channel
  Secondary IDE channel
  3 entries for Peter card reader &

  Intel drivers, I downloaded from-

  s http://downloadcenter.Intel.com/Confirm.aspx?httpDown=http://downloadmirror.Intel.com/21730/eng/f6flpy-x86.zip&lang=eng&DwnldID=21730&DownloadType=Driver & OSFullname = Windows + XP + *.

  .. .and it gives me the list of controllers to choose;

  Intel (R) 5 Series 4 Port SATA AHCI Controller
  Intel (R) 5 Series 6 Port SATA AHCI Controller
  Intel (R) 5 Series/3400 Series SATA AHCI Controller
  Intel (R) 7 Series Chipsets SATA AHCI Controller
  Intel (R) 7 series/C216 Chipset Family SATA AHCI Controller
  Intel (R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller
  Intel(r) ICH10D / DO SATA AHCI Controller
  Intel(r) ICH10R SATA AHCI Controller
  Intel(r) ICH7M/MDH SATA AHCI Controller
  Intel(r) ICH9M - E / M SATA AHCI Controller
  Intel (R) Mobile Express Chipset SATA AHCI Controller

  The device ID of the controller (Intel (R) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller - B 3, 28), I'm trying to install the drivers AHCI is;
  PCI\VEN_8086 & DEV_3B28 & SUBSYS_00011179 & REV_06\3 & 115 83659 & 0 & FA

  Please can someone tell me which of these to use with the above material?

  It takes me ages to build, install, bluescreen & rebuild to try again...

  Thanks for sharing!

• Tecra A9 - driver is missing

  Tecra A9 model RTS52A-023017 running XP Pro (32-bit) Service pack 3
  Device shows problem with Device Manager
  Various drivers downloaded from Toshiba and Intel but unable to encourage drivers to work
  The laptop is currenlty displaying on it's own lcd but I am unable to change the resolution - no settings tab when you go to desktop properties

  I reinstalled XP SP3 but still no luck.

  Any suggestions?

  Hello!

  This driver is missing on your laptop?
  I think that it s because you display driver can t change the display resolution.

  Consult the Toshiba site. You will find all the drivers for your laptop:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Did you install the laptop using the Toshiba Recovery disk?

  Good bye

• Re: Unable to run the HARD drive recovery in the Tecra A11

  My laptop is a TECRA A11 - 1 8 PTSE1E-07-J044AR with processor i5, 4 GB RAM and running Windows 7 64 bit. Recently I had a problem with one of the user (desktop profile) profiles and has not been able to create one despite several attempts, so decided to reformat to the factory settings. But nevertheless I tried the procedure, he went only up to the Boot Manager settings. After that, the warning screen never comes to the top and the laptop eventually normal startup.

  So I decided to ignore the recovery of HARD drive and installed Windows 7 32 bit through a CD of formatting of the main partition to C: drive, but keeping the recovery partition, just in case. Now, even if Windows installed fine, however, none of the drivers (LAN, WiFi, video, sound, etc.) are installed.

  Now my questions are:

  1 can I reinstall my old Windows 64 bit through the recovery of HARD drive? If so, how?

  2. can I continue with the newly installed 32-bit Windows and just install all the necessary drivers and utils from Toshiba? If so, where the sources?

  Would be grateful for any help.

  > 1. Can I reinstall my old Windows 64 bit through the recovery of HARD drive? If so, how?
  After the clean version of the OS that it is not possible to install the recovery image using recovery option of HARD drive due to lack of repair my option computer start-up advanced options (F8 at startup).
  You can install recovery using recovery DVDs image only. Did you create this recovery disk?
  > 2. I can continue with the newly installed 32-bit Windows and just install all the necessary drivers and > Toshiba utils? If so, where the sources?
  Of course you can do it. If Win7 32-bit is supported for this laptop model all the necessary drivers, the tools and the utilities that you can find on the download page of Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• Tecra A11 - 11: BSOD when plugging in USB devices

  Help. We have several laptop Tecra A11 - 11 to different schools * ALL * with the same problems.

  When the laptop is up and running if a USB device is plugged into one of the USB ports the laptop flashes a very quick BSOD and dies. What is more remarkable with interactive whiteboard USB connection. If that is connected when the laptop is turned on the swift BSOD happens 9 out of 10 times.

  Laptops are downgraded to XP Pro using the Toshiba DVD downgrade. They run on a Server 2003 domain.

  I have updated the BIOS twice now on each of them for the latest BIOS. Also updated the graphics driver supporting the Toshiba last request. No difference. I was told last week she was refitted and I would soon hear. I called today a week later and wsa said she had not yet been raised.

  We bought these thinking they were large laptops with a lot of future proofing not much good if they are not fit for purpose. Children are missing out on an education smoothly through these problems that Toshiba do not treat.

  In addition to this when a non admin user screen resolution of trhe grave at 800 x 600. With the help of a utility shortcut Toshiba Zoom view (Fn + SPACEBAR) you can switch this back as an interim solution, but it is still pending as a flaw.

  Any help is greatly appreciated. Many teachers and many children you will be grateful too.

  Hello

  It's a little difficult to say what are the causes of BSOD.

  > I have updated the BIOS twice now on each of them for the latest BIOS. Also updated the graphics driver supporting the Toshiba last request.

  Have you tried a utility chipset?

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Find your model and install

• Tecra A11 Touchpad Windows 10 questions

  After upgrading my Tecra A11-182 (PTSE0E-0LP046GR) for Windows 10, I have problems with the touchpad. The cursor jumps from time to time in other places on the desktop, as in Word 2010. Y at - it a new version of the driver for this device? The Windows Device Manager indicates that the most recent driver is installed. Thank you for your suggestions

  Achim

  The cursor jumps because your palm makes contact with the touchpad while you type.

  The advanced settings of Touchpad has an option called "Disable tapping" or «Disable the Touchpad when typing»
  If you do not have these settings, you must update the driver for the Touchpad (Synaptics or Alps) that is compatible with Windows 10.

• Tecra A11 - less than 10 ips in Skyrim on

  Hello
  I have a Tecra A11 i7 which came with a wiped HARD drive
  I installed win 7 pro and the drivers from the Toshiba site, including the pilot Intel Turbo Boost Technology.

  Even with all the settings set to low temperatures, vid Skyrim runs only less than 10 frames per second.
  I upgraded 4-8gig ram, but this did not help.
  The GPU is Intel, so I can't use Geforce experience.

  I have a Dell Vostro V131 i5 which takes place to better Skyrim.
  But the screen is smaller and i/o ports are 90% of dead, so I'd rather use the Toshiba.

  There are 4 "unknown devices" in Device Manager, but none of them look relevant.

  Does anyone have any ideas?

  Thank you

  To be honest, I have no reasonable explanation because I don't have this video game and can not test it on my Tecra A11 - 19M.
  In my opinion this Tecra is typical business very bad for the games and the machine for office work.
  It does not offer good graphics performance and it is not the best for gaming.

  I use it for daily activities and games use different model Satellite P with nvidia GPU.

• Tecra A11 - 1EG - cannot be accessed after the supervisor setting BIOS password

  Hello, I would like to know if anyone can help?

  We have started to put a supervisor on our laptop Tecra A11 password so that our students can not set passwords on the hard drive, etc.

  To enter the BIOS and set a BIOS password, press us F2 that the machine starts.
  Then we go to the security option, then supervisor password.
  After entering the password we use twice, press us F10 to save etc.

  The machine starts ok and will windows smoothly.

  The problem we have now, is that we cannot go back into the bios at all.
  As machine starts support us on the "F2" key as before, but unlike previously the screen remains white and the "Toshiba leading Innovation > ' screen no longer appears."

  If we keep our finger on the F' key or continue pressing the laptop restarts just without ever get to the BIOS screen where I guess that get us ask the supervisor password that we set earlier?

  Is there another key, that we should be pressing that start the laptop?

  I would add that we have added a password of supervisor for the screen of security BIOS on three of our laptops and all three have the same problem.

  Thank you

  Steve

  I think this should be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

  In some cases, you need to press the "INS" in Toshiba logo appears.

  Then appears a prompt for the password for the supervisor and if the password is certified then the BIOS could be entered by pressing the "F2" key

• Tecra A11 - 113 - white screen and the cursor of the mouse during the boot

  Hello

  My Toshiba Tecra A11-113 with win 7 32 bit boots with a mouse cursor and the visible white screen.
  I tried to start under different boot options. Mode, safemode, last repair job configuration
  and msdos command only... all these startup options give the same result.

  I also tried with win 7 32 bit dvd, but same result.

  I am able to access the C drive by booting with a linux key, so the data is visible.

  Can someone please give me a solution?

  Thank you

  What happens if you access the BIOS? Is menu visible on-screen BIOS?
  Turn on the unit F2 button and press.
  This should allow you to access the BIOS.

  If you will be able to access the BIOS and see everything as usual, then the screen is OK and I think there is a problem with your installation of Windows System.
  So boot from the Toshiba Recovery disk should help you solve this problem.

  You said that you already tried to boot from the Windows DVD disc is this Toshiba Recovery disk? In my opinion, you use this disk to restore the laptop to factory settings.