Tecra A11 - space keyboard key issue

Similar Questions

• Keyboard key issues

  I have a laptop (DV6206us) and recently started having some keyboard key issues. For example G, H, BACKSPACE, scroll keys and some other don't type/work in a hurry. The keyboard itself has had a cover transparent latex that I installed the keys because I bought it to protect from spills, dust, etc... After taking a closer look, I noticed that if I press a certain area/s around the keyboard keys are working. But as soon as I release the pressure of the particular region the keys stop working.

  This is an easy fix? Something I can do myself? If this is not the case, what would be the approximate cost for the repair or replacement of the keyboard?

  I suspect that my son (15mos) is at fault. I have a few times caught using my laptop as a step back bag, while the laptop was in the bag. The backpack offers a padding on all sides. But I think that the pressure of him standing / use it as a step caused the keyboard key issues.

  The problem has been resolved with just open up the laptop and fixing the connector loose keyboard cable I found.

• Tecra A11 PTSEOU: Some keyboard keys not working not

  Hello

  In my Toshiba Tecra A11 PTSEOU - 08904L model, some of the keys on keyboard did not, initially, key 6 did not work. But now about 12 keys did not work.

  When I press one of these keys, I hear a single beep and nothing happens.
  Even I can't see the bios menu when you start the computer as "press f2 for boot menu".

  Is there something to do with the bios for this problem?
  I tried updating the bios, but the installation failed saying incompatible bios. Help, please

  Thank you
  Thawfeek.

  > Is there something to do with the bios for this problem?
  BIOS? Why ORGANIC?
  I assume that the problem of its equipment and you will have to replace the internal keyboard.

  Just to confirm the problem with keyboard: you can connect external USB keyboard.
  In case the external keyboard would work correctly, the problem is related to the internal keyboard.

• Keyboard backlit for Tecra A11

  Hi people!

  I am looking for a backlit keyboard for my Toshiba Tecra A11 E19.

  Was a visionary, a product for my series? Maybe another suits you?

  Thanks for the tips.

  Best regards
  0815

  Illuminated also AFAIK Tecra A11 was not designed and delivered with keyboard so I'm pretty sure you such keyboard does not exist for this Tecra A11.

• Tecra A11 - 15 d: possibility to get a keyboard without a block number?

  Hello Forum

  Is it possible to replace the keyboard of a Tecra A11 - 15 d with a keyboard without a block number?
  (In general I prefer the keyboard without a block number)

  Thank you very much for your answers!

  Concerning
  Andi

  Hello

  I don't know if the other keyboard without the numeric keypad would be and would be compatible m.
  But if this replacement would be possible, then, you'd be able to get the part that is compatible with a Toshiba authorized service provider in your country.
  So I recommend you to get in touch with an ASP and ask for this keyboard replacement. Maybe you will get such part

• Tecra A11 - impossible to get the FN keys to run on Win 7

  I had to do a fresh install of Windows 7 on my Tecra A11.

  Everything works fine but I find that I really really miss the ability to activate the trackpad turn off and turn on the wireless and turn off.

  I'm guessing that the only way to do it would be to reinstall this program that connects the FN key for the numbered function keys.

  I don't know what to call it so I don't know what to look for. I want to be careful and not to install more that I need.

  Y at - it program or how I can get this resettled function?

  Thank you

  Susan

  p.s. This forum very well, I found how to turn the touchpad off when a mouse is installed, but if I don't have a mouse attached and it's off, I'm in a mess :)

  Hello

  The FN keys are controlled by VAP (value added package) and the Support of Flash memory card utility.
  Install the VAP first and check if the FN keys work. If it will not work then you should also try the Flash Cards Support utility to get this FN buttons working.
  Flash memory card Support is located in Satellite L500 or other subsequent series

  Welcome them

• Re: Tecra A11 Win7 function F6 + F7 keys don't work

  Hello

  I installed Win7 manually on a Tecra A11. I also installed all necessary drivers and "Value Pack". Before I installed th AVP no function button has worked, even the top status bar does not appear. When I installed it, all the keys work fine and also the status bar is displayed by pressing, the fn key. All keys except the keys to adjust the brightness of the display. A restart does not help... Do I need an another utilitiy?

  Thanks for help

  TOB

  Hello

  Please check in the BIOS if the boot mode is not the quick value!
  If it s quick value and then set it back to normal mode.

  Please check this!

• Tecra A11 - problems of the more recent/video BIOS

  Hi all

  I just got a Toshiba Tecra A11 the other day which is out of warranty (Refurb). When I got the laptop there is a problem where the photo was displayed at 1024 x 768 and biased (in BIOS). Image 1-2cm off the screen to the left, with over the space of 5-6 cm black to the right of the picture, the low 2-3 cm of the image were also the bottom of the screen.

  I installed Ubuntu Studio initially and attempted to force the display to a wide screen resolution. I didn't have a chance, I also installed Win7, but still with the latest drivers, I had no chance.

  It was strange because the BIOS was displayed in the same way, so, naturally, I decided to upgrade to the latest version of the BIOS. The BIOS of the laptop is quite old (end of 2009).
  I downloaded the update to the BIOS of Toshiba web site and ran the update.

  The new BIOS has been installed and rebooted the machine.
  However there was no image displayed on the LCD screen, windows startup has done successfully, if I connect to an external monitor to the laptop I brush. When starting the laptop backlight LCD lights.

  My question is: what can I do to fix this? Is a tool of recovery or down to BIOS available? Is it possible to reflash the bios? What is recommended?

  Thank you.

  > The new BIOS has been installed and rebooted the machine.
  > However there was no image displayed on the LCD screen, windows startup has done successfully, if I connect to an external monitor to the laptop I brush. When starting the laptop backlight LCD lights.

  This means that everything is ok with the external monitor?
  You can access the BIOS by pressing F2 and you can set it to the default settings?

  Usually, you can switch between the external and internal view using the FN + F5 key combination. It work?

• Tecra A11 - 1EG - cannot be accessed after the supervisor setting BIOS password

  Hello, I would like to know if anyone can help?

  We have started to put a supervisor on our laptop Tecra A11 password so that our students can not set passwords on the hard drive, etc.

  To enter the BIOS and set a BIOS password, press us F2 that the machine starts.
  Then we go to the security option, then supervisor password.
  After entering the password we use twice, press us F10 to save etc.

  The machine starts ok and will windows smoothly.

  The problem we have now, is that we cannot go back into the bios at all.
  As machine starts support us on the "F2" key as before, but unlike previously the screen remains white and the "Toshiba leading Innovation > ' screen no longer appears."

  If we keep our finger on the F' key or continue pressing the laptop restarts just without ever get to the BIOS screen where I guess that get us ask the supervisor password that we set earlier?

  Is there another key, that we should be pressing that start the laptop?

  I would add that we have added a password of supervisor for the screen of security BIOS on three of our laptops and all three have the same problem.

  Thank you

  Steve

  I think this should be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

  In some cases, you need to press the "INS" in Toshiba logo appears.

  Then appears a prompt for the password for the supervisor and if the password is certified then the BIOS could be entered by pressing the "F2" key

• Tecra A11 - 113 - white screen and the cursor of the mouse during the boot

  Hello

  My Toshiba Tecra A11-113 with win 7 32 bit boots with a mouse cursor and the visible white screen.
  I tried to start under different boot options. Mode, safemode, last repair job configuration
  and msdos command only... all these startup options give the same result.

  I also tried with win 7 32 bit dvd, but same result.

  I am able to access the C drive by booting with a linux key, so the data is visible.

  Can someone please give me a solution?

  Thank you

  What happens if you access the BIOS? Is menu visible on-screen BIOS?
  Turn on the unit F2 button and press.
  This should allow you to access the BIOS.

  If you will be able to access the BIOS and see everything as usual, then the screen is OK and I think there is a problem with your installation of Windows System.
  So boot from the Toshiba Recovery disk should help you solve this problem.

  You said that you already tried to boot from the Windows DVD disc is this Toshiba Recovery disk? In my opinion, you use this disk to restore the laptop to factory settings.

• Cannot open files locked by using fingerprints on Tecra A11 - 17 H

  Hello

  I have a Toshiba Tecra A11 - 17 H - PTSE0E-03402EFR
  OS is Windows 7 64 bit

  Here's my problem:
  I blocked files (image, text) with fingerprints, while I was running Windows XP Professional.

  I copied my files without unlocked on external hard drive, and then uninstalled XP and installed Windows 7.
  After the relocation, the fingerprint reader has stopped working.
  I had to download the drivers and software on the Toshiba site.

  I then put my transferred on the external hard drive on the computer, but now it is impossible to open the file.
  Extension has been changed (automatically), an fpl. came to added after the original extension.

  I tried fpl removed, but nothing happens.
  When I right-click, I do not have the option 'unblock, but rather "to protect the file".

  I understand (reading the forum) that fingerprinting technology TPM consists of a microchip containing a unique computer decryption key.
  Theoretically, it would be possible to unlock my files, since it is the same computer...

  Help me please...

  Please read this:
  [Cannot access protected fingerprint after recovery files | http://aps2.toshiba-tro.de/kb0/TSB9802O50000R01.htm]

  _Issue: _
  A user can access its files of fingerprints protected when you save these files on external storage as for example a network drive and perform a recovery or reinstallation of the operating system on the computer where the files are protected.

  Individual: _
  AuthenTec fingerprint software provides a feature called 'the file/folder protection' which gives the user the ability to protect files without worrying if stored locally, on an external (USB flash memory) or network storage with either a password or stored fingerprints. After you protect the files, they cannot be moved/copied/deleted until the user Déprotège them.

  The first cause of the above mentioned scenario is due to the fact that the fingerprint software "Authentec" creates a link between material installed fingerprint and file system on the HARD disk that functions as a key. This connection is deleted after a formatting or removal of the hard drive of the computer. Without this connection, the files are no longer accessible and the user will not be able to unprotect them since there is no "key", that could unlock the file protection.

  _Resolution: _
  To avoid any loss of data caused by this scenario, * you need to unprotect the files before storing the files on external media * for purposes of backup/storage and then reinstall the operating system.
  Generally, users should make sure to keep a backup accessible to external storage of data corruption and data loss.

• Tecra A11 and BACK version of Symantec Ghost

  Hello

  Someone had a little luck in getting the BACK of Symantec Ghost version to work on the Tecra A11? If yes what version do you use?
  My problem is not keyboard in version 11.0.1. Mouse mat is ok. I have the KB/mouse USB Legacy emulation enabled in BIOS.

  And Yes, I know I should use ghost32 instead, but I really do not have to make that change right now :)

  What operating system is preinstalled on your Tecra?

• Tecra A11 - cannot burn CD - R

  Hello

  My Tecra A11 with Win 7 Pro 64 and a carpet * a DVD-RAM UJ890AS is not able to burn on a CD - R. CD - RW and DVD no problem, but when you try to burn a CD - R I got following error Code: 060277-26 - 2A 031000

  I tried the solution in
  http://forums.Toshiba.com/T5/computer-troubleshooting/error-code-380381-26-2a031000/TD-p/172666
  -without success. There is no filter in case key in my registry.

  I have tried 3 different brands of CD - r, I tried CDBurnerXP and the Toshiba Disc Creator - still the same error. It is written (copy of a music CD) track list, then the error pops up. The CD - R is not usable more after that.

  What can I do? Is it possible to Flash the firmware of the drive from DVD - if yes, where can I get the fw?
  Thanks in advance!

  Hello

  Have which brands you tried?
  I use TDK R and they work properly.

  In addition, I recommend the alcohol laser lens or cotton cleaning tip.
  Has also had problems reading and burning the discs that have been fixed after cleaning the lens.

• Tecra A11 & Express Port Replicator II - USB problems

  Hello

  I'm having a problem with a port replicator that I simple couldn't have resolved for months. I'll try to explain this as best I can.

  We have a Tecra A11, which seems to work fine running on Windows 7 Professional. When the Tecra A11 is pluged in an Express Port Replicator 2, not USB ports in the port replicator's work at all. Very good cell phone fees and the LAN switches on the replicator fine, but the USB ports simly does not work under any circumstances. It would also be interesting to note that the green light next to the "eject" button lights never really.

  I downloaded and installed the latest series driver for Windows 7 from the Toshiba support page which has no effect. We had 2 replacements for Toshiba because they also agreed that the previous, we had were not woring correctly, but this obviously was not the case because we still have the same problem with our 3rd unit. The Tecra A11 was sent back to Toshiba with case notes clearly describing the question, and he was sent to us "no fault found".

  Unfortunately, we don't have any other laptops to test on the port replicator. but I'm seriously suspect that the problem lies in the laptop, rather than the port replicator. For any idea or suggestion will be greatly appreciated.

  Kind regards

  Steve.

  Hello

  According to your message, you are not sure if the problem is related to the defective laptop Tecra or express port replicator.
  Hmm theoretically the problem might be related to defective express port replicator or Tecra.

  If found some information on the USB ports and the repliators port:

  + Make sure that the element of Legacy USB in the BIOS emulation is set to "Enabled". This feature only works for the keyboard and mouse. Also note that the keyboard and mouse must be connected before you start the computer. A USB mouse, keyboard or the floppy drive connected to the Port Replicator via any other connection that a hub of the first level, will not work until the operating system has started. +

  I also recommend to check the version of the BIOS; If the most recent BIOS is available, then you need to update this

• Tecra A11 - VAP installation failed on Win 7 64 bit error 0x8146045B

  Hello

  I need help. The flash on my phone card tool was out of use. I downloaded the value added package in the 1.3.5 version and tried to install. Installation fail after having extracted the Exe file compressed with the error "Setup PVAT error. [0x8146045B] ". I thougt the error may occure while I not remove the installed software before. So I uninstall the value-added package. After reboot and without installation of value added new package the same error.

  How can I install value added package again?

  Tecra A11, Windows 7 64 bit

  Concerning
  TS

  Hi TSAGI,.

  I had a similar problem with the package of added value, so I also removed the previous version first. But after the reboot, I used the freeware CCleaner tool to clean the registry and delete the old keys of VAP. So just download CCleaner and run it, after this restart again and try to install VAP.

  Check this box!