Tecra A2 - FN keys do not work

Similar Questions

• Tecra A2 FN + key does not work properly

  Hello world.
  I have a Tecra A2 (PTA202A-02R002)
  Running on an XP Pro
  The FN key is works but doesn't work don't not with others (F6, F7, F8 for the brightness of the screen and wireless).

  I'd appreciate any help.
  Thanks in advance.

  See you soon
  JAX

  Hello

  Please check your other thread with the same question/problem on Satellite M40:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53561

  Toshiba tools for this function are associated OS, not hardware.

• Tecra A11 - FN keys do not work in Win 7 64 bit running

  Small problem, reloaded Win 7 64 bit, now there is a problem with my FN keys work does not,

  Please help, no cd not supplied with laptop

  I assume that you have installed the Win7 clean version, right?
  You must install additional package from Toshiba. This package contains several tools and one of them is flash cards. Also install flash cards support utility if this tool is available on the Toshiba download page.

• Tecra A9 - some of the FN keys do not work under Win XP

  My Tecra A9 laptop comes with Vista... but then I changed my OS XP SP2...
  Since then, some of my FN keys do not work, like the fn - f6 fn + f7, etc., but some FN keys work very well as fn + f5 or fn-numbers...

  Any help?

  Hello

  The FN key combination requires an additional tool for Toshiba as the Toshiba Power Saver.
  Without installed Toshiba Power Saver, these keys, IE FN + F3 + F4 may not work properly.
  Please check if all the necessary applications have been installed!

  PS; Additional resettlement of the common Modules is always a good idea ;)

  Good bye

• Tecra M1: left and right arrow keys do not work

  Hi, my tecra M1 upwards, the left and right arrow keys do not work on the standard keyboard - no external keyboard. I can't find a keyboard tester to see if the computer recognizes these keys. Only the low key works - no problems with others like PG. Prev or PG. Next, etc. etc. Any suggestions?

  Mike Mori

  Hi Mike

  When you start your laptop at the beginning you can see the symbols of disk in the lower corner of the screen. If a player is selected under the side, you will see a short line. When these symbols appear press immediately to the left or right arrow several times to see if the line will be cut to the left or to the right. On this way, you can try to check if these buttons are recognized from the beginning.

  Please inquire about the results.

• Tecra S5 - FN and sound keys do not work

  Hi, I have problems with sound in Notepad, when the noise stopped working, I reinstalled the sound drivers but the sound does not work.

  The FN keys do not work in the other direction, I can "adjust brightness and sound with the FN keys. I too reinstalled the utilities, but when I run the "accessibility" a windows popup is shown in the screen that says: "the registry is missing or can be broken."

  I don't know if the two problems can be related to each other, but both began to arrive at the same time.

  Thanks in advance and best regards,
  Dani.

  Hi dmorenob,

  What operating system is currently installed?

  Sound card is listed in the Device Manager?

• Tecra 540 CDT: keyboard does not work properly

  Hi people

  Just bought a 540cdt Tecra second hand and the keyboard is a bit strange - A key does not work and some of the keys seem to make things weird-UPDATE prints an exclamation mark and key END operates caps lock etc. I don't know if it's a keyboard of knakckered or whether the same strange keyboard configuration has been made. If it's a flat keyboard will install a replacement to solve the problem?

  Also, is it possible to replace the CD drive with a DVD - ROM drive. From the looks of it all DVD players I have met seem to be model specific.

  See you soon

  Peter

  Hello

  Maybe your operating system has keyboard settings wrong country.
  Check in the control panel settings. But for me, it looks more like a keyboard or a keyboard controller failure.
  Perhaps also loses the keyboard cable.
  I don't know if only a new keyboard will solve the problem. I think the detailed diagnostic test is necessary.
  If you want to upgrade your laptop with DVD drive, please check first if it is taken in charge and compatible. If you install the disc is not compatible, then you will get an IDE error and the BIOS does not recognize the drive.

• A few Macbook keyboard keys do not work

  Hello

  I have the Macbook with OSX El Captian 2012 model running. The keys f, g, h, j, k, l will not work. Initially, when I hit these keys several times, they used to work, but now they do not completely work. AHT test ran and it is said that there is no hardware problem. I hit the option 5 times, but it would not have helped either. I noticed when allegedly struck ' key and hold, f - l keys work. Please help me solve this problem. Replacement of keyboard looks expensive.

  Kind regards

  Cédric

  Hey John,

  Thank you for being a part of the communities of Apple Support.

  It appears from your message that a line of F to L keys do not work correctly on your MacBook Pro. What I would like to, it's please use the keyboard on your Mac Viewer to verify that the keys are not currently recognized on your Mac:

  OS X El Capitan: use the keyboard Viewer

  If the problem persists, please reset your memory NVRAM-How to reset the NVRAM on your Mac- and report with your findings.

  See you soon.

• Command + Option + P + R keys do not work

  Hello world

  I have a 2 models of macbook pro 2010. When I first got them I gave each a password firmware, but for some strange reason, one of them the password does not work! So I need to reset it. I read the forums where it says to remove 1 stick of RAM (fact), reset the SMC (which is), then hold down COMMAND + OPTION + P + R hown to reset the PRAM.

  Problem is to keep these keys does nothing. The macbook starts just to the top as usual. GRRR! It's infuriating! I've tried everything. I also met several other MacBook & macbook pro in the past when he had the chip of ram only 1 I tried to case.have, 2 chips of RAM, Exchange autour, new ram, and 3 other different types of RAM, still the same problem. I have 2 x 2 GB ddr3 1333 mhz in there. I tried chips to 4 gb and 8 gb chips as well. Why the these keys are not suitable? I just don't understand and it's very frustrating because it works just fine on the other macbook pro and the specification and even the model is exactly the same thing...

  I know that the keyboard is OK because the holding CONTROL + OPTION + SHIFT and the power button to do an SMC reset works very well. and Yes, I tried to connect a wired usb macintosh keyboard. These keys do not work either and I know that the keyboard is fine because it works on the imac. I find it confusing that google has no answer for that, surely someone else has had this problem?

  You can reset PRAM with Terminal too: http://osxdaily.com/2015/12/16/view-clear-nvram-mac-command-line-osx/

• Tab and control keys do not work in Firefox (they work in other browsers) AND I went to a new keyboard.

  Tab and control keys do not work the browser Firefox (my browser is up-to-date). The buttons work in IE and Chrome, however, until I realized that, I even changed my keyboard for a brand new, hoping that would solve the problem.

  Hello arlusk, the problem is probably an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• The Enter key does not work in the address bar; I have to manually select the icon ' go to ' since the upgrade to Version 10.

  I just upgraded to Firefox 10. When I manually enter a URL in the address bar, press 'Go To' does not focus, then the Enter key will not work. I have to manually select the arrow "go to" to navigate. Any suggestions?

  This could be the extension of AVG safe search. If you have installed, try disabling it. Instructions here: use the extensions to add functionality to Firefox

• page up and down and the arrow keys do not work, they do on any other programs

  Page up and down and the arrow keys do not work or jump at the bottom of page.

  You may have accidentally entered mode 'Keyboard Navigation. The F7 key will toggle "Keyboard Navigation" on or off.

  • See-> http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• CTRL keys do not work on Portege A600

  Both CTRL keys do not work in my Portege A600, I'm updating from vista to win 7 and I can´t use of keys CTRL times.

  in this thread talks about it, but have no solution

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40628

  I contact toshiba support but have no information on what it.

  What can I do?

  Diego

  Hello

  I think that your keyboard is faulty.
  Connect an external USB keyboard and check if both CTRL would work.
  If both work correctly using the external keyboard, then your internal keyboard should be replaced to solve this problem.

• I don't know how i ' v, but I lost the toolbars at the top and bottom. [Alt] will not bring up the toolbar and scroll keys do not work. How can I fix it?

  I managed to hide the toolbars, ALL of them. [Alt] brings to the top of the toolbar so that I can change them. In addition, the [previous page] [next page], [home] and [end] keys do not work.

  You can have:

  1. Choose the Mode "full screen" or
  2. unchecked toolbars

  The F11 key activates / turns off Mode full screen or not. Full screen, you have no toolbars, no tab and no bar Add on (bottom).

  • See-> http://kb.mozillazine.org/Netbooks#Full_screen

  If unchecked you your toolbars (checked = displayed; UN - check = not displayed), and then do one of the following, then click on those you want to check/uncheck:

  • Right-click in the empty space at the end of the tab bar
  • Press the ALT key or the F10, the poster Menu bar, click View > toolbars
  • Firefox button > Options
  • Hold down the ALT key and type the letters of the keyboard V T
  • See-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing
  • Also see-> https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
  • Also see-> http://kb.mozillazine.org/Toolbar_customization

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Installed Tuneup Uitlitie and my control keys do not work

  Hello

  Since I installed Tuneup Uitlities my keys do not work.
  For example: I can't adjust the sound volume or toggle wlan with the keys F1 - F12.

  I already searched in Google, but I can't find a solution. Is it possible that Tuneup have uninstalled or disabled the Launch Manager? How can I install/activate this new?
  I can't find something.

  Hope someone can help me,

  Katja

  > Is it possible that Tuneup have uninstalled or disabled the Launch Manager?

  Never heard talk of launch manager on the Toshiba laptop computer, but of course, the FN buttons are controlled by special software.
  I put t know what system you are using and what laptop do you have but for example:
  Using the Win 7, value added package system and some utility Flash card access buttons controls the FN.