Tecra A2 - no sound under Win XP

Similar Questions

• Tecra A8 - no sound using Win XP

  I installed windows xp on my Tecra a8.
  Windows detected the realtek hd audio card. I installed the audio driver, windows can play music, but there is no sound.
  The "speaker" icon is not cut.

  I'm going to Panel speaker - its - control - advance - and selected portable stereo speaker and headphone but still no sound.
  I pressed ESC (a speaker symbol), the volume button in the middle of the base but still no sound.

  Is this hardware problem?

  Can someone please

  Hello

  Win XP SP3 is needed because SP3 contains significant fixes for HD audio driver.
  It must install SP3 first, then the audio driver!
  If driver sound has been already installed, then remove it and then install SP3.

  Also, I found this FAQ from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB7C021B0001R01.htm

  It s related to the Vista operating system but maybe you should try it under Win XP!

• Tecra A10 - no sound using Win XP

  Hi all
  I have some problems with the sound of my Toshiba Tecra A10. I have already installed the Audio from Realtek driver and I see the little speaker symbol down on the right side, too.

  But I don't hear anything. The Device Manager has a yellow question mark on "Modem Device on High Definition Bus" Audio.

  I installed the Driver Modem Agere Systems, but nothing happened.

  Can someone help me and give me a link for this driver I need.
  I use Windows XP.

  Details of the material:

  HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040 & SUBSYS_11790001 & REV_1002\4 & 9E9AEC4 & 0 & 0101

  Kind regards

  > I use Windows XP.

  OK, although similar questions I with Win XP on other laptops with new HD audio from Realtek.
  The point is that you have SP2 and SP3!

  The SP2 and SP3 provides important patches and fixes for the HD audio
  Then firstly uninstall the Realtek audio driver.
  Then install the SP2 and SP3.
  Then go to Device Manager and remove the marked devices of yellow exclamation.
  Reboot the laptop.
  Now Win XP should find a new audio device and should ask the driver.
  No, you must install the audio driver from Realtek.
  Reboot once more and now the sound should works fine

• Update BIOS and Tecra A9 - no sound with Win 7

  Hello

  I installed Windows 7 from a Tecra A9 laptop and everything works fine except the sound. Sound card for Windows 7 driver is already installed. The speakers and the microphone is detected. While playing music in sound devices the green bar under the speakers raises up and down, but I can't hear anything.

  I read that the update of the BIOS can help, but it does not work under Windows 7, with a Live CD of Windows XP or in Windows XP Mode for Windows 7.

  I don't want to reinstall Windows XP.

  -Does anyone know how to get the sound working properly?

  Have you checked it with headphones?
  Have you noticed the same thing?

  To be honest I don't think THAT BIOS will change anything on this subject. If the audio driver is installed correctly, check that all the settings in Windows and also in Audio DD Realtek Audio Manager.

• Tecra M2 - no sound using Win XP

  Hello. IM in the States by the way. I couldn't get logged in the other forums of Toshiba. (Don't ask). So ill just ask for help here.

  I have an Audio/speakers/Sound card problem. I don't know who it is, if any. I have a Toshiba Tecra M2,
  Don't know what model. Under my laptop, it just says: Tecra M2. Made in China. I got it off the coast of a friend, don't know where he got it.

  After I got it, I installed Windows XP Home sp3. Updated some hardware that could not find drivers and everything works fine
  with the exception of my sound. I have a good driver, no warning of any yellow exclamation point. I checked and double-checked
  and triple checked all volume and mute options. The volume knob on the front of the laptop is turned upward.

  I installed these patches UAA

  After checking KB888111WXPSP2 on 21/01/2010
  After checking KB888111WXPSP3 on 02/02/2010
  passed verification KB898461 on 20/01/2010

  Go to administrative tools > Services > Windows Audio is started and automatic.

  I installed the Chipset first and re-installed my audio driver utility. Still not fixed.

  I get sound through the headset. But is all torn, looks like someone took a screwdriver
  and dug around in it. The helmet is not same snap tight as it should be, he wiggles around.

  So I have to move the CAP autour until I find the right place and the Øresund will play through the headphones, but the slightest bump
  to it will cut off the sound of the headset. I tried to move card into the socket to take off all the sensors stuck in there,
  (if it is left there.) That did not work.

  So I thought that I work around the internal speakers and headphones and just buy a few external USB Portable speakers.
  so I did, and they do not play all the sounds! I am in a bind. The only thing I can think is if I update my
  The motherboard BIOS and perhaps the noise will kick in. I checked my current BIOS settings, there is nothing on the Audio or sound. But I don't know what BIOS file for in downloads. If someone could help me here I would much apreciate that too.

  If anyone has more ideas on how to solve this problem, please, please offer advice you can think. Thank you.

  Here is some info on my PC laptop Toshiba Tecra M2.

  Operating system
  -----------------
  Windows XP Home Edition Service Pack 3 (build 2600)
  Multimedia
  -----------
  SoundMAX Integrated Digital Audio
  Driver date: 01/09/2004
  Driver version: 5.12.1.5240

  If you need more info, just tell me what to do.

  Inside the headphone jack there is a small mixer. This switch disables the laptop speakers when the headset is connected. Perhaps this little switch is broken or somehow can not activate Laptop speakers when the headset is disconnected. So you can have good working sound card, but you do not hear anything on the laptop speakers.

• Satellite A300D - 17 d - bad quality sound under Win XP - Vista is good

  Hello, I had before the Windows Vista Home premium 32-bit operating system, but it was preinstalled on my laptop.
  but was very bad and I install a new OS Windows XP Professional Service Pack 3 32 bit...

  Everything is good, but on Vista the sound was very very good and quality.
  but now I install XP and the sound is very very bad not that on Vista, Vista was very good and sound quality. What is the problem?

  This driver/s I install on my XP for high quality sound on Vista?
  The specifications of my laptop are on this site:
  http://EU.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=EU&DISC_MODEL=0 & ACTION = PRINT_WITH_BACK & BV_UseBVCookie = Yes & PRODUCT _ID = 1058048

  Thank you very much and sorry my English.
  Slovak I´M :)

  Hello

  You must go to the page of the toshiba driver and check for xp audio driver for your model:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Map Bluetooth PCMCIA (PA3053E) under Win XP

  How can I install my Bluetooth PCMCIA (PA3053E) card under Win XP?

  You have the latest Bluetooth driver? If this isn't the case, you will need to download it on the Toshiba site for your machine. After you download the driver, make sure that you install the Bluetooth battery before connecting your PCMCIA card. Once the installation process is finished, insert the Windows XP PC card will handle the rest, that is, it will install the PC card automatically.

• Pavilion dv7 4060us: dv7 4060us graphics driver under Win 10

  I may be beating a dead here horse I did a bit of research on this issue, but I thought I would try once more on the HP forums.

  I have a good Pavilion dv7 4060us I use to transport my QuickBooks files and inventory with me at the customer site, or when I'm away from the office. I bought it in 2010-2011 because of its performance and price point. The fact that it is a mobile entertainment isn't really the problem. By that I mean I played a DVD or two on it, but that is not its primary mission.

  Having said all that, I, as a Microsoft Insider (aren't we all?) I tried Win 10 since last October. I have five other computers in my company to update to Win 10 very well. Desktop computers.

  But, and I knew better, I leave my dv7 update win 10 home (Win 7 Home) update the graphics drivers under Win 10 HP, even tho ' the review date seems to be August 5 (or 8) 2015, seems to not work. The laptop uses generic LCD drivers from Microsoft. Not the end of the world, but I wonder if anyone has found a way to resolve this display problem. I see that wil HP does not support for this combination hybrid AMD card (5650/4250 HD). I used the Compatibility Mode in the past with some success. In any case, this post was long enough... I can roll it back to Win 7 Home, but I really don't like the appearance of this computer entertainment.

  Any thoughts, or should I just shut up and go away?

  Thank you, DD

  I appreciate your concern for my situation, thank you. I did all of this, including finding a compatible driver supposedly this material on the website of AMD. When I looked at AMD site this month / last month, they said that they will not only support the material under Win 10 (said the same HP, actually, but I'm stubborn). Imagine my surprise when I found that the site would allow me to download a driver today for the HD 5650/4200 under Win 10 64-bit. But it doesn't install properly, be and gives me the same dialog box: No. AMC graphics driver is currently installed or it is not working properly.

  Maybe I'm not fluent in the AMD/ATI products and update I'm with nVidia graphics, I use in my other machines without any problem.

  In any case, I thank everybody help, but I spent too much time on this question; I'm done. I can use the 4060 as it is. Former systems engineer, I felt sure I could fix it but apparently not. In any case, no worries and thank you!

  Kind regards

  DD

• How can I work from my deskstop PCs, directly in a foledr shared under win server 2008 so that all my work is saved directly on the server.

  How can I work from my deskstop PCs, directly in a foledr shared under win server 2008 so that all my work is saved directly on the server.

  what I try to do is the following.

  I installed winserver 2008 on a machine and I created a folder for the individual. I want the individaul to connect in the folder ocreated on winserver 2008 directly from their desktop and laptop computers and their work so that all works are recorded directly on the server.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Need driver for scanner BenQ s2w 5000U will run under Win 7 and XP

  Need driver for scanner BenQ s2w 5000U will run under Win 7 and XP

  original title: software

  Autour Googling I see that several pilot sites offer Win98, NT, Win2k, XP drivers for this very old scanner. Be careful when you use pilot sites and do not click on ads or links that say to search for drivers. It is unlikely that this very old scanner will work with Win7. Better to buy just a new scanner that will take in charge Win7 and XP. MS - MVP - Elephant Boy computers - don't panic!

• I get the error number: 0x80072EE2 when I try to run windows or microsoft update under Win xp

  I get the error number: 0x80072EE2 when I try to run windows or microsoft update under Win xp

  Hello

  I suggest you try all the steps in the following article.
  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates.
  http://support.Microsoft.com/kb/836941

  I hope this helps.

• PSC750 under Win 7

  I understand that my printer scanner PSC750 is getting a bit old but it still works fine.

  Always used under Win XP. I've now updated? for Win 7 and I am told by Microsoft etc that no additional driver is necessary.

  Why then it is printing in black and white only and in reverse order of page?

  Is this just a ploy to get me to buy a new printer, it will probably not be HP however.

  Is there a driver that works please?

  Mike

  Have you set up printing preferences?  Click on start, devices and printers, right-click on the 750 PSC, printing preferences and you can change the order of pages or select B & W or color printing.

  

  

• Cannot install old software under Win 7

  I just bought a Win 7 laptop to remove or replace a desktop XP computer. Initially, it came with Win 7 Home Premium. I could not install an earlier version of the software Quickbook, who previously installed and running well under XP or Vista.  See in-store technicians; they all recommend the upgrade to Win 7 Professional so that it can run the program in XP mode. After this upgrade, I can not install the software.

  QuickBook Setup starts with run 'install' which is supposed to launch setup.exe. the latter is supposed to install Quickbook under Win 7 Professional.

  I appreciate any help from this forum! More recent Quickbook ranking would be simple, but for the fact that the data file is accessible from many other user/computer with earlier versions of Windows. Old QuickBook does not recognize the new Quickbook data format.

  Windows XP Mode is installed?

  Please note that Windows XP Mode is a separate instance of Windows to be installed first, and then you need to install the software inside Quickbooks, which will then run the application from Windows 7. The following article will show you how to set up Windows XP Mode and how to virtualize your application (ignore the part about setting up hard assisted virtualization)

  Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

  If you have not yet downloaded Windows XP Mode:

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• How can I unlock the 427 udp port. I'm under win 7 with firewall and microsoft security essentials. No firewalls or additional security software

  How can I unlock the 427 udp port. I'm under win 7 with firewall and microsoft security essentials. No additional firewall or a security software when I go to the microsoft security essentials in the start menu, I can't find any reference to the ports.  I can't printer to work on the wireless network, even if the printer says that it is connected to the network.

  Hello

  Start the firewall of Windows listed in administrative tools.

  Create a new rule to open port 427.

  Carlos

• HOW TO REMOVE 2 PRINTERS INSTALLED UNDER WIN 7 ON THE SAME PORT (LPT1)

  HOW TO REMOVE 2 PRINTERS INSTALLED UNDER WIN 7 ON THE SAME PORT (LPT1)

  Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

  http://answers.Microsoft.com/fr-FR