Tecra A8 - no sound using Win XP

Similar Questions

• Tecra A10 - no sound using Win XP

  Hi all
  I have some problems with the sound of my Toshiba Tecra A10. I have already installed the Audio from Realtek driver and I see the little speaker symbol down on the right side, too.

  But I don't hear anything. The Device Manager has a yellow question mark on "Modem Device on High Definition Bus" Audio.

  I installed the Driver Modem Agere Systems, but nothing happened.

  Can someone help me and give me a link for this driver I need.
  I use Windows XP.

  Details of the material:

  HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040 & SUBSYS_11790001 & REV_1002\4 & 9E9AEC4 & 0 & 0101

  Kind regards

  > I use Windows XP.

  OK, although similar questions I with Win XP on other laptops with new HD audio from Realtek.
  The point is that you have SP2 and SP3!

  The SP2 and SP3 provides important patches and fixes for the HD audio
  Then firstly uninstall the Realtek audio driver.
  Then install the SP2 and SP3.
  Then go to Device Manager and remove the marked devices of yellow exclamation.
  Reboot the laptop.
  Now Win XP should find a new audio device and should ask the driver.
  No, you must install the audio driver from Realtek.
  Reboot once more and now the sound should works fine

• Tecra M2 - no sound using Win XP

  Hello. IM in the States by the way. I couldn't get logged in the other forums of Toshiba. (Don't ask). So ill just ask for help here.

  I have an Audio/speakers/Sound card problem. I don't know who it is, if any. I have a Toshiba Tecra M2,
  Don't know what model. Under my laptop, it just says: Tecra M2. Made in China. I got it off the coast of a friend, don't know where he got it.

  After I got it, I installed Windows XP Home sp3. Updated some hardware that could not find drivers and everything works fine
  with the exception of my sound. I have a good driver, no warning of any yellow exclamation point. I checked and double-checked
  and triple checked all volume and mute options. The volume knob on the front of the laptop is turned upward.

  I installed these patches UAA

  After checking KB888111WXPSP2 on 21/01/2010
  After checking KB888111WXPSP3 on 02/02/2010
  passed verification KB898461 on 20/01/2010

  Go to administrative tools > Services > Windows Audio is started and automatic.

  I installed the Chipset first and re-installed my audio driver utility. Still not fixed.

  I get sound through the headset. But is all torn, looks like someone took a screwdriver
  and dug around in it. The helmet is not same snap tight as it should be, he wiggles around.

  So I have to move the CAP autour until I find the right place and the Øresund will play through the headphones, but the slightest bump
  to it will cut off the sound of the headset. I tried to move card into the socket to take off all the sensors stuck in there,
  (if it is left there.) That did not work.

  So I thought that I work around the internal speakers and headphones and just buy a few external USB Portable speakers.
  so I did, and they do not play all the sounds! I am in a bind. The only thing I can think is if I update my
  The motherboard BIOS and perhaps the noise will kick in. I checked my current BIOS settings, there is nothing on the Audio or sound. But I don't know what BIOS file for in downloads. If someone could help me here I would much apreciate that too.

  If anyone has more ideas on how to solve this problem, please, please offer advice you can think. Thank you.

  Here is some info on my PC laptop Toshiba Tecra M2.

  Operating system
  -----------------
  Windows XP Home Edition Service Pack 3 (build 2600)
  Multimedia
  -----------
  SoundMAX Integrated Digital Audio
  Driver date: 01/09/2004
  Driver version: 5.12.1.5240

  If you need more info, just tell me what to do.

  Inside the headphone jack there is a small mixer. This switch disables the laptop speakers when the headset is connected. Perhaps this little switch is broken or somehow can not activate Laptop speakers when the headset is disconnected. So you can have good working sound card, but you do not hear anything on the laptop speakers.

• Satellite U400 - 10l: no sound using Win XP 64-bit

  So I do not where to start...

  I have some problems with note Satellite U400 - 10l.
  Today I ' m trying to install winxp64b to my note. but after the installation starts more problems...

  the its don' t work? But why I ' m donwlod good pilot...
  Since the installation of sceer print driver...
  [http://tinypic.com/r/28wglcx/6]

  then the following... in system maganer for windows problem
  [http://tinypic.com/r/2woj1qv/6]

  could you please... give me the link directly to the correct drivers downoad?
  hepl me please! someone...

  Hello

  Satellite U400 - 10l belongs to the series of PSU40E and it supports the audio chip Conexant CX20561
  You need the Conexant audio driver in order to get the proper functioning!

  Please note that the Win XP drivers placed on the Toshiba page are released for Win 32 bit OS! Usually, they don t work with 64 bit XP!
  If you need Win XP 64 bit Conexant sound driver you need to search n 3 third-party pages for this driver.

  In addition, you must install Win XP service packs newer!
  SP3 includes many fixes that are necessary and important.
  SP3 must be installed before installing the audio driver.

• Update BIOS and Tecra A9 - no sound with Win 7

  Hello

  I installed Windows 7 from a Tecra A9 laptop and everything works fine except the sound. Sound card for Windows 7 driver is already installed. The speakers and the microphone is detected. While playing music in sound devices the green bar under the speakers raises up and down, but I can't hear anything.

  I read that the update of the BIOS can help, but it does not work under Windows 7, with a Live CD of Windows XP or in Windows XP Mode for Windows 7.

  I don't want to reinstall Windows XP.

  -Does anyone know how to get the sound working properly?

  Have you checked it with headphones?
  Have you noticed the same thing?

  To be honest I don't think THAT BIOS will change anything on this subject. If the audio driver is installed correctly, check that all the settings in Windows and also in Audio DD Realtek Audio Manager.

• Tecra A2 - no sound under Win XP

  To cut a long story short, I installed a registry cleaner via a usb key.

  After running the cleaner, uninstall unused programs too, the cell phone has become fast enough but audio disappeared I accidentally uninstalled the Sigmatel AC97 driver. However I couldn't reinstall the driver because of an error message that I am getting.

  Without a cd to XP, I tried a system restore and proceeded. I managed to install the driver, but again I have no had no noise while the icon and the audio console was in order. I have a scanner and there were a couple of malware in the system that I got rid of.
  Again not sound. I run microsoft fixit audio and the result was: "everything is working perfectly.

  Is there something I can do to regain the sound back without having to reinstall the windows?
  I don't have the CD to install XP in any case.

  Thanks in advance for any suggestions.

  Thanks for the short comments!

• Tecra 9100: Circle sound card - yellow in Device Manager

  I have a Tecra 9100 using win XP pro SP2. Recently, my sound disappeared, and I use the card his Yamaha AC - XG. The unit displays a with a circle yellow exclaimation mark. I tried to use the help to solve this problem, but still works cant, also tried to download the drivers to date but did not help either.
  Is it possible to fix this problem.

  Hello Bernard

  I have the same unit pre-installed with Windows XP Home SP2 edition too and I installed the audio driver Yamaha 6.13.10.2152 version and it works well.

  Test if you wish.

  Good bye

• Tecra 8200: If I use the moniter decrease brightness battery power

  I have a laptop Toshiba tecra 8200, when I use it on battery moniter decrease brightness, I tried to adjust the power to the control panel settings, but there is no option for brightness (win xp)? anyone has idea how to adjust the brightness on battery?

  Hello

  If I remember right you can set the brightness of the display by saving settings. Please start Toshiba Power saver. Check the part runs on batteries. There must be some NORMAL called marker profile. Click details, and then click standby power mode tab.

  There monitor the brightness option. All the four options set at the maximum level. Now when you use your laptop on battery power the brightness of the monitor will be defined to the maximum level.

  Please test.

• How to open my GMail on Firefox. Using Win XP PRO SP 3.0 32 bit

  I use WIN XP PRO SP 3.0, 32-bit
  How to access my account GMail using Firefox?
  I tend to forget all about my GMail, so need to read, a lot of emails, he...
  Please, I'm a novice user step by step please
  Thank you very much
  Sylvia

  Just type "gmail.com" into the URL in Firefox toolbar and press the Enter key on your keyboard. You can directly access the Gmail login page.

  Awesome Bar - Find your Firefox bookmarks, history, tabs in the address bar

• Using Win 7 OS 29.0.1 - window popup says v30 available, but "On Firefox" said 29.0.1 with no option to upgrade. False ".

  Using Win 7 OS 29.0.1 - window popup says v30 available, but "On Firefox" said 29.0.1 with no option to upgrade. Not sure if popup is wrong or why "On Firefox" does not give me the option.

  Put your firefox here:

  • https://www.Mozilla.org/

  .
  

  Edit: link fixed.

• Firefox process continues to run. I can't open a new session until I manually stop Firefox 32 process in the tax Manager. Using Win Vista Ultimate 64 Version 6.0 Service Pack 2

  Firefox process continues to run. I can't open a new session until I manually stop Firefox 32 process in the tax Manager. Using Win Vista Ultimate 64 Version 6.0 Service Pack 2

  Firefox is already running but is not responding

  • https://support.Mozilla.com/en-us/KB/Firefox%20is%20already%20Running%20But%20is%20not%20responding

  Firefox crashes on exit

  • https://support.Mozilla.com/en-us/KB/Firefox%20hangs#w_hang-at-exit

  Check and tell if its working.

• Cannot change the brightness on Toshiba Tecra S11 with Win7 using the FN keys

  I can't change the brightness on Toshiba Tecra S11 with Win7 using the FN keys (disable audio and other work fine) when logged in as a normal user.
  Shortcuts keyboard console appears and pressing F6 or F7, the brightness is always set to level 1 (no matter how luminous monitor is really) and cannot be changed.
  I can change it via power or Administrator Options.

  Hello

  Maybe you didn't install VAP (value added package) for all user accounts.
  Please reinstall VAP by using your user account.

  You can also check if the user account is the Admin right supported.
  You can run simple applications (exe) as an administrator.
  For this, he must right click on exe file (value package) and should choose + Run as administrator. +

  Check it!

• Satellite A500: Low resolution using Win 7

  Hello

  I have looked around the forum and have found no real solution to my problem so...
  I recently bought a Satellite A500 and did a clean installation of Windows 7 Professional on this subject.

  Apparently, I had to just update to keep the drivers, but being the noob that I am, I have not.
  So now that my resolution is stuck at 1024 x 768 or 800 x 600, neither of which are native.

  I downloaded the drivers 64-bit win7 on the Toshiba site, but apparently, I already have the latest ATI driver installed.
  However, I can't always change the resolution, and my monitor is recognized as generic non - PnP.
  Is it possible to check if I have the display driver?

  And also all the solutions for the display problem would be very grateful. It's the only thing that remains now bothering me on this new laptop.

  Hello

  I assume you are using Win 7 64 bit OS because you selected the display of Win 7 64-bit driver is good?

  What A500-xxx you have exactly?
  The European driver Toshiba page provides three different display drivers for the A500 series. Intel, nVidia and ATI
  Seems three different graphics chips were installed in series A500

  You should first check what graphics chip using your laptop
  Then go to Device Manager and uninstall the display driver.
  Then visit the page of the European driver Toshiba, download the display on the right for the graphics chip driver and install it.

  Then restart the device and check how would go to the laptop.

  Welcome them

• Satellite L650-11F - question about brightness of the display by using Win XP

  I apologize;
  I want to know is why in windows xp before you plug the adapter into the laptop (Toshiba L650-11F), screen light is bright, but when I drag the adapter, the display light is dark? And the driver is installed

  Please help me

  Hello

  Alternatively, you can change the brightness of the screen by using the FN + F6 and FN F7.
  But as mentioned by Akuma; You should check the power options.
  I guess that the Toshiba Power Saver is installed because you use Win XP.

  In the configuration of the Toshiba Power Saver, you can assign the screen brightness level to certain power profile. For example; You can define a profile of power when the laptop is connected to the power adapter or another profile of power for battery operation.

  Perhaps the brightness of the display is set to a lower level, while the laptop works on sector
  Then change this value, and I think that this will solve your problem.

• Remove the child window Parent using WIN API

  Hi all

  For a parent-child relationship between two screws using the User32.dll I use the SetParent function and pass the handle of the parent VI and VI child to this function. Now, after this relationship has been established, I want to remove the child from the parent window and use it as an independent VI using WIN API. Can someone help me on this?

  Thanks in advance!

  Fragger Fox!

  Hi Fragger Fox,

  I think that it should be possible, if you assign a new parent to the child. Maybe this works if you assign the desktop as a new parent.

  It will be useful.

  Mike