Tecra A3X: How to run the recovery CD

Similar Questions

• Tecra A3X - how to remove the BIOS password?

  Hello

  I have a Tecra A3x who died before Christmas. I bought a motherboard replacement on eBay. I mounted the motherboard and the powers of the Unit well stop but to a password screen that is black. I tried to find a way to wipe the BIOS and have removed the CMOS battery for about 10 minutes. I read that most laptops have a jumper built in too fix. I've looked in the usual places - memory modules etc. I can t find it anywhere.

  Any help would be very welcome.

  Thank you
  John

  Hello John

  As you probably know BIOS password is very important security feature and remove the BIOS password can be described on the public forum of the manufacturer s. It is a kind of top secret information.
  It is not logical to do this, right?

  Each Tecra A3X stolen with BIOS password could be unlocked.
  In my opinion, you should contact the person who sells you this motherboard and request password. If he cannot stop, return. At this info in the description of the product on its offer to ebay?

• Equium won't start - how to access the recovery partition?

  Hi, my sister has a 2008 Equium A200-1V0 with Vista 32-bit, that no longer starts (probably due to damage of rootkit virus). It loads the BIOS but then goes to black screen with blinking cursor.

  F8 does not work.
  F2 goes to Phoenix TrustedCore Setup utility. The Toshiba hard drive and a CD-ROM drive are listed in hand and start in the right order.

  Using F12 I can get it to boot from a Win7 64 bit repair disc that I burned using my laptop.

  However, it does not recognize the operating system or any image or restore points (because it is 64-bit) but he will be responsible for command prompt.

  To * guest *, I can launch Notepad and when I click on file / open and double click on computer it shows 4 Hard drives as follows:
  Local disc (c :))
  Data (d :)) 42 GB free of 54.5 GB
  WinRE (e :)) 1.11 GB free of 1.46 GB)
  Boot (x :)) 29.0 MB of free space of 31.5 MB (which is used by the repair disk)

  So the C: drive is listed, but without ability.

  * CHKDSK *.
  CHKDSK c: /r and press return

  «The type of the file system is NTFS.»
  Unable to determine the status and version of the volume. CHKDSK is abandoned.
  Cannot transfer messages saved in the journal of the events with the 50 State.

  * Run TESTDISK *.

  Analysis:
  Size of the partition start end in sectors
  1 P Windows RE (store) 0 32 33 191 89 26 3072000
  2 * HPFS - NTFS 191 89 27 7477 118 1 117051392
  3 P HPFS - NTFS 7477 118 2 14592 190 62 114307072 (data)

  * = Primary bootable
  When you perform a quick search, then P - list of files, the second partition it reports:
  "Cannot open the file system. Filesystem seems damaged. »

  So what I want to do is boot to Windows restore to drive E.

  My question is for Toshiba experts: If F8 does not work how to use the recovery partition?

  Laptop is:
  Part number: PSAF5E-002005KS
  Main features
  -Intel® Pentium® Dual-Core Processor T2310
  -Genuine Windows Vista® Home Premium Edition
  -Drive DVD Super Multi (Double Layer)
  -2 048 (1 024 + 1 024) MB of RAM (667 MHz)
  -15.4 "WXGA TFT display 1 280 x 800

  > THIS ISN'T MICROSOFT, TOSHIBA, AND GOOD PRODUCT DESIGN.
  I really put t know that should do better than to place the Microsoft sticker at the bottom.
  This product key and sticker on it's just proof that you purchased the machine with an operating system preinstalled and legal active OS version. This key belongs to original OS (recovery image) that you got with your laptop and it is not a kind of universal key that you can use for the activation of the operating system if you have made the decision to install the clean version of the OS.

  In General, this key is totally useless. While your computer you've got legal copy and this version, that you can install so often desired. It must not be enabled.
  > So my question still remains: can I recover my Toshiba laptop using this restore partition?
  If you want to recover using the Toshiba recovery image response is not. Cannot start HARD drive recovery facility.
  > Even with a dvd of Windows Vista is genuine, I can't reload the OS
  In my opinion you need make the clean OS installation using the clean installation or order original Toshiba Recovery disk on https://backupmedia.toshiba.eu/landing.aspx disc and install original (already active) recovery image.

• How to use the recovery CD?

  Hello

  Ive lost the instructions to tell me how to use the recovery CD. I forgot, I need to press to access the disks when I reboot!

  Can anyone help please?
  St. Clare

  Hi clear, before using the recovery CD make you that all important data has been saved to the floppy or USB key because the procedure will erase the entire hard drive. The method for booting from a cΘdΘrom may vary according to the model number of your laptop, but it's something like hold the 'B' button for the Toshiba Startup logo. If this fails you can try to change the boot sequence or use the Toshiba from Windows or the BIOS configuration tool (ESC then F1 when prompted from a cold start) make CD-ROM the first device startup in the list.

  Richard S.

• Re: How to start the recovery from the hidden partition?

  Sorry for my English.

  I reinstalled Windows from DVD Windows (win Vista) because I get blue screen sometimes. After the reinstallation, I had the same problem again.
  Now the shop wants to charge me for the service because recovery F8 does not work. I still have this hidden partition, but I put t know how to do the recovery. Any chance of fixing the problem?

  I don t care about the data and the blue screen, I think than is hardware problem.
  Thank you

  Hello

  Now you have the problem. You can start the recovery folder HDDRecovery facility just if your laptop has the factory settings.
  When you use Microsoft facilities disk for the installation of the operating system, this option will be gone.

  You have created recovery DVD such as recommended by Toshiba?

• I'm not clear how to use the recovery CD

  I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.

  A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?

  Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
  The only person who could help me went to travel and not reachable.
  Any help greatly appreciated
  Lorraine Hart

  It of a very simple to recover the laptop.
  Just boot from the recovery CD and follow the instructions on-screen ;)

  I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
  So in this case only the selected partition will be formatted!

  But have you checked the size of the HARD disk in disk management?
  Simply click on the my icon my computer and choose manage.

  Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.

• Re: Satellite Pro L450D - 12 X - how to access the recovery partition?

  Hello

  I've formatted Windows 7 with a Windows XP CD but did not setup. I wanted to know how to access the recovery partition to set it by default, everything exists on the laptop right now is Ubuntu, but I don't know, I saw an additional partition that must contain recovery files as laptop did not come with a recovery disk and unfortunately did not create a filter.

  How can I access the recovery partition on the laptop having in mind, I formatted the drive Windows 7 was installed on or should I activate or something like that?

  Any help much appreciated

  Hey,.

  On the second partition of your laptop (data partition), you will find a folder named HDDrecovery and it contains recovery files. The problem is that you can use the HARD drive only with the pre-installed operating system recovery feature. It would mean in your case it s too late now and it s not in use anymore.

  You have created the Toshiba recovery disc as mentioned in the user manual? If Yes, you can use this disk to restore to factory settings. Just boot from this CD and follow the instructions on the screen.

  If you don t have the recovery disc, you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite U300 - how to use the recovery disk?

  I inserted the recovery disc 1 and then restarted my computer, but nothing happened.
  I really need to fix my cause cell it's time to review!

  Does anyone know how to use the recovery disk or affecting function press when the laptop starts to use the programmed recovery?

  Thank you!

  Hello!

  If you have inserted the recovery disc you must only start her everything that s!

  I m not sure but I think you can go into the advanced boot menu if you press F12. Alternative change you the boot priority in the BIOS. You can access BIOS by pressing F2.

  Good bye

• Try to run the recovery on my Satellite A75 disc

  When you try to run the recovery on my A75 disc, I get a message that it will not work on a machine not Toshiba. Looks like I'm missing some system files.

  Hello

  You use the recovery disk shipped with this laptop?
  Are you sure you have the right drive?

  Other reasons might be wrong or missing information in the DMI.
  The DMI contains details on the laptop model, serial number and other necessary details.
  If this information is not correct, then the laptop cannot be recognized as a unit of Toshiba and so the Toshiba recovery procedure would not be possible.

  Check out this US page:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=DMI+A75.------

  You will find information on the DMI and the A75 Sat

• Lean how to run the stop code when the highest level VI ends

  Hi people.

  I am a newbie of LV with 30 years of experience in embedded SW engineering.  I searched for how to run the stop code when a VI of highest level ends.  I found many examples, but they are horribly complicated.  A little birdie told me that such a model of simple design should not be so compilicated.

  My application is an application of high tension control to disable all HV checkpoints when the SW ends.  My VI code is running in a while loop with a stop button that leads out of the loop.  I can easily accomplish my requirement by programming with a sequence of plate that runs after the end of the main loop.  The technique of flat sequence does not work when the user clicks the Cancel button in the toolbar of façade, more than that market when the user clicks the close button of the application (X button) when you run the exe application.

  Can someone tell me please a simple technique, the code example that can show me a lean and elegant way to accomplish my task?  It doesn't have to be an obvious solution (for example a stop induced watchdog seems simple enough).

  Thank you - John Speth

  1. place this code in a VI:

  (also attached)

  Calling code in your VI of highest level like this:

  

• How to run the VI developed in labVIEW 2011 in its previous versions

  Hi all

  I am currently using LabVIEW 2011 in my PC at home.

  But, all my school's computers are installed with LabVIEW 2010 and 2010 SP1.

  How to run the VI developed in LabVIEW 2011 in its previous versions?

  Is there any conveter why?

  Concerning

  Prasanth T

  Open the VI in LabVIEW 2011 and use the file menu option, save for the previous Version.

• How to change the recovery of main mobile phone account is linked to a mobile phone that is no longer in use

  Using Hotmail, how to change the recovery of main mobile phone account is linked to a mobile phone that is no longer in use.

  I can't remove it, I can't change it or do anything else without the system you want to send a text message for that phone for conformation. can you change the setting to send an email to the place or the main number of conformation ahange.

  Steve

  Hello

  The question you have posted is related to hotmail; This is why it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://www.windowslivehelp.com/product.aspx?ProductID=1

  http://www.windowslivehelp.com/

• How to use the recovery on USB media?

  Kindly tell me how to use the recovery on USB media? I deleted the my laptop's recovery partition and I am facing problem to restore previous windows during the upgrade to windows 8.1.

  Hello

  I'm really sorry, I made a mistake and posted the link to your subject (subject) here at the forum.

  The real link for this problem is-> http://support.hp.com/us-en/document/c03489643

  The instructions are the same

• How to copy the recovery on the new HARD drive partition, HARD drive failed?

  Hallo,

  I have a Compaq Mini netbook with Windows 7 Starter.

  The HARD drive has failed and it is not repairable. However, it seems that the recovery partition is OK.

  I want to buy a new HARD drive, install the driver on the netbook, and then use the tools/recovery partition to install windows 7 on a new PC.

  So, the question is simple: how to copy the recovery for the new HARD drive partition?

  Hello s91066.

  If your hard drive of your laptop doesn't have? If this is the case, what do you mean by the "recovery partition is ok? I doubt that this laptop has two hard disks, so if you are able to see this partition of your hard drive may still work.

  You will need a set of recovery disks to restore the partitions on the new drive. If you can start Windows, which you can probably not with a dead hard drive, you can follow these steps if you can get into Windows.

  If you are unable to boot into Windows, you need a set of disks. You can order it directly from HP. The number of the United States / Canada is 1-800-474-6836. If you are in another domain, you must visit HP's Support around the world to find contact information for your region.

  I hope that is useful; have a great weekend!

• How to remove the recovery disc files D?

  Original title: drive D

  How to remove the recovery disc files D?

  Hello
  
  It is not recommended to delete the files in the recovery partition.  Recovery partition contains the Windows information to retrieve the computer crashing. I would ask you to contact the manufacturer of the computer on it.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.