Done Tecra A8 PTA83E support 5.1 system speakers & how to connect it

Similar Questions

• Tecra A8 PTA83E - only 3.3 GB recognized by 64-bit systems

  Hello

  I have a Toshiba Tecra A8 PTA83E, recently, I inserted 2x2gb DDR2 PC6400 (800 Mhz), my laptop supports only PC5300 (667 Mhz), memory works well, but under ubuntu (x 64) I see only 3, 2 GB, WIN 7 (x 64) and in memtest 3, 3 GB. Why this behavior? Is because the modules of memory has a greater frequency than those who support the laptop? If I insert a memory module(2GB) at a time I see 1, 9 GB. Thank you.

  Hello

  I guess that the other part of the main memory is shared by the graphics chip.
  What value memory appears in the BIOS?

  If the 4 GB are indicated, then everything should be OK.

• Tecra A8 PTA83E - installation of package of added value

  Tosiba Tecra A8 PTA83E
  Microsoft Windows Vista Ultimate X 64

  I was unable to install the Toshiba Value added package (vap-vista-1011btn-en) or any version before it. I talked to technical support Tosh for many times and they always promise of customer support will respond to the request, they never do.

  Towards the end of the installation, start the process of "Computational space needs" an error dialog box that contains "ID_ERR_NOTINSTALLVALZ_MESSAGE". The only option available is 'ok' and when this field is selected the installation rolls back and the finishing screen says "The wizard was interrupted before that TOSHIBA Value Added Package can be installed completely".

  I'm, I'm sure you understand, VERY frustrated by this problem. I bought (the very expensive) Vista Ultimate as Toshiba, claim that this laptop is Vista ready and it is quite possible, but the drivers and software provided are not. I also have problems with:

  Bluetooth
  Free config utility
  WinBIOS updater
  Audio driver
  Graphics driver

  I will record these problems from another thread I want to deal with these problems one at a time.

  Thanks in advance for any help being given/offered.

  Hello

  You run the 64-bit version of Vista?

  I m not very surprised that you are not able to install the Package Toshiba Vista added value.
  All the drivers, tools, and utilities are designed for the 32-bit version of Vista!

  To my knowledge the drivers 32 bit don t run on Vista 64-bit operating system!

  Regarding the error ID NOTINSTALLVALZ ERR MESSAGE.
  It seems that the BIOS update could solve this problem.

  This was reported in different threads here in the Toshiba forum!

  For example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20471&MessageID=75256
  or
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21232&MessageID=78197

  Greetings

• Tecra A8 PTA83A - Vista 32 bit drivers needed

  Hello

  I'll try to find the drivers (Vista 32 bit) for this computer laptop pta83a - 04g 012.

  However, I can not even find the laptop on the Australian site. In fact I can't find anywhere what "A8" laptops at all.

  http://www.MyToshiba.com.au/support/download

  Can someone help me please.

  I also checked some other sites Toshiba from different countries without result.

  I wish there was an option to check through all countries, at the same time.

  Kind regards
  Paul

  Hmm... I'm not sure why this Tecra series is not listed on the page of the Australian driver Toshiba but same model Tecra A8E PTA83 is released in Europe also.

  

  You can download and use the drivers for your laptop that appear on the page of the European driver Toshiba
  http://www.Toshiba.EU/innovation/Dow...jsp?service=EU

  The drivers are fully compatible

• Can you please help me low grade that my 4.0 to 3.5 for the school system - 4.0 only is not supported by my system schools online, if I had known this I would not have updated.

  I have since moved from 3.5 to 4.0, that this version is not supported by online systems of my schools-so anytime there is a problem, they are unable to help him? Is there anyway for me to downgrade to 3.5. I'm already having problems, even entering the system!

  I really don't want to go back to IE, please help me downgrade to 3.5, so I can stay with you guys.

  Thank you very much for your help!

  Sincerely,
  Lindsay Walton

  If you switch to Firefox 3.5 you will lose historic navigation and cookies. If you switch to 3.6 you will not lose data.

  Downgrade to Firefox 3.5 or 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.

  Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.

  If you need to go to 3.5, you can get the latest version of Firefox 3.5 http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.5.18/win32/en-US/

  I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.

  For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles

• Tecra M2 is supports SD HC 4 GB cards?

  Does anyone know if the SD slot on the tecra m2 will support SDHC 4 GB cards?

  See you soon. Dave

  Hello sunset

  Unfortunately I Don t SDHC card, but I can confirm that Tecra M2 can read usual of 4 GB SD card. I tested it with a card SD Transcend 150 x.

  If you find something on the SDHC card compatibility please let me know.

• "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

  Original title:

  Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

  Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

  Hello

  You did changes to the computer, before the show?

  Solution A:

  For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

  Method 1:

  Check out the following link.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  Connect the external hard drive on another USB port and check.

  Solution B:

  For the problem with the help and Support, check if the service is enabled.

  a. click Start, click run. In the Open box, type services.msc and press ENTER.

  b. right-click on the service called Help and Support , and then select Properties.

  c. under the general tab, set the type Startup to Automatic and click Start.

  d. close the services window and check for the issue.

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.

• Why don't I have easily select my questions open after the connection support?

  Why don't I have easily select my questions open after the connection support?

  When I connect support communities, I have still no clear idea where to find my support questions which remain open to check updates.

  Seems to me that this should be a great, distinct and separate button on the homepage of support after you have connected.  "My open issues Apple Community Support."

  Is this too much to ask?

  Steve

  1. Click / tap your username
  2. Click / tap 'manage subscriptions '.

  

• Satellite R830-143 - update of the BIOS does not support this operating system

  Hello

  I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

  The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

  I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

  Does anyone know what is the problem?

  Thanks in advance for your help...

  Hello

  You have problems with the laptop?
  If not then why you want to do the BIOS? Just because the new BIOS is released?
  I would not change anything if my laptop is running correctly.

  However, the update of the BIOS requires the VAP (value added package).
  So remember that this PPV is installed correctly. If this isn't the case, so far.

• FF DOES NOT OPEN. SAYS IT IS 'NOT SUPPORTED ON THIS SYSTEM"USED TO WORK VERY WELL.

  Icon has disappeared from the dock, notice says "Firefox not is not supported on this system", the icon in the Applications folder has now a line circle and slash through it. That's happened? I tried to re - install and got the same result. Am running OS 10.4.11

  The latest version of Mozilla that works on the old 10.4 has Firefox 3.6.18. From Firefox 4.0 and newer Intel Mac and OSX 10.5 and newer is necessary to make it work.

  http://www.Mozilla.com/en-us/Firefox/all-older.html

  However since you use a PPC Mac there is an option of third parties to the http://www.floodgap.com/software/tenfourfox/

• Install the network and specific peripheral controller on Tecra A8 PTA83E

  Hello

  I have to install windows XP on Tecra A8 PT83E. Everything work fine except 2 devices. Indeed, in Device Manager, I can not install network controller and a device specific. Where can I find the two driver or which driver to install? All other devices are installed.

  Thanks for your help.
  Isabelle

  Hello

  I wonder why you are not able to install the LAN driver and why an additional device appears as an unknown device in Device Manager?  :|

  I ve checked the page pilot European Toshiba and found everything to install the drivers successfully on the Tecra A8 PTA83 series...!

  All the XP drivers are available.
  I presume that check you didn t txt file of installation instructions that was placed on the driver page! Am I wrong?

  Please check this document! You must download and install all drivers and tools specified in the right order!
  The proper installation order is important!

  I think that if you follow the guidelines everything works as it should!

  Concerning

• Added value package new updated day on Tecra A8 - PTA83E

  Hello

  I searched the site of updated drivers from Toshiba here and I found the update of the package of value added on Tecra A8 PTA83E on Windows Vista Business 32 bit and the name of the files that I downloaded from this site for this added value Package is: vap - 20080108130751.zip, but the problem is the content of this file is not for Tecra A8 PTA83 update! Is PTA82?

  How can I get the update of this value-added package for Tecra A8 PTA83 for Vista Business 32 bit?

  Please I need it so much... :(

  Hello

  As far as I know, there is no difference and this PPV can be used on both models. Have you tried to install it?

• HTTP: Error 58 (the network function is not supported by the system)

  Hi all

  I have a problem with HTTP Client in LV 2011 functions.

  As you can see in the screenshot attached, I try just:

  -Open a handle-> no errors

  -Send a web request using the GET method-> error 58

  -close the handle

  The problem is that a 58 error: "the network function is not supported by the system. However, it works fine when I type the same URL in a web browser.

  You have any idea of what could be the problem? Thank you in advance for your help!

  J.

  I have fixed the bug: there was a white at the beginning of the URL... (!!!). I deleted the empty character and now it's OK.

• Portable CQ58, disk recovery "this computer is not supported by the system recovery media.

  Hello HP,.

  I have a laptop CQ58-bf9WM, which had Windows 8.1.  The 320 GB hard drive died and bought a new SATA 500 GB laptop.  had no CD recovery, went online, enter all the important information, serial No., model #, then purchased through HP recovery disk, received the CD (manufacturer 708896-001, 708895-001 708897-001) and put #1 disc in the CD started and that's what I get: this computer is not supported by the system recovery media.  You will not be able to continue to recover this system with these media.  "Error: 0100-169-1855-188 b" then you have the OK, then when you press OK, the laptop shuts down.  I pressed ESC on POST, then I tested memory and the new hard drive and they both passed.  HELP PLEASE!  Thank you

  Should not have anything to do with the new hard-both disk that is at least equal or greater than original ability, they work. It is 'possible' that you have received the wrong set of recovery.

  Thing of OE to check. Enter the BIOS by pressing F10 immediately after turning on (have to press ESC, then F10 to the menu). Is the serial number, model number.etc all intact?