Tecra A8 - W2K SD Host Controllor pilot

Similar Questions

• Tecra 8100 W2K: Fn + F5 produces Blue Screen of Death (BSOD)

  My faithful 8100 (W2K sp4) has developed an irritating fault. If you press Fn + F5 (display control), the system crashes quickly.

  It is quite difficult to see what is being said ' cos the BSOD message flashes very quickly and by.
  However, it seems that Stop 0 x 00000050 (0xF000FF54) IPF in nonpaged area.
  Address 0045AB9F base at 20400000 DateStamp 45069e6e ntoskrnl.exe
  Early physical blah blah memory dump

  Now, I have no idea whay it started. In case it was a software I provided an image the boot partition to a stable image of 12 months ago, but it makes no difference.

  Its something to do with windows for sure. If I press Fn + F5 until Windows has loaded there is no problem.

  I'll try it in SafeMode tomorrow to see if that helps, but if anyone has any experience of something similar I'd love to hear it.

  Thanks for any info

  Hello

  It is not easy to say what the problem is here, but you can try to remove the Toshiba from your system utilities. Restart your Tecra and check if the function FN went. If so, this tool is responsible for this.

  Download and install again. Perhaps this will help you solve this unusual problem.
  To be honest I never, but never really heard of something similar.

• Tecra 8000: W2K - how to operate the 2 screens at the same time

  I have a tecra 8000 with win 2000 pro is installed.

  Everything works fine with one exception...
  Press the [fn] [f5] keys to use the device outside.

  Is there a way I can get it to run 2 screens at the same time (either cloned or, preferably tv being a secondary monitor)?

  If anyone can help I would be eternally grateful

  Thank you

  I'm not familiar with the Tecra 8000 and W2K operating system. If there I sno good driver on Toshiba download page (I assume W2K is not supported for this model of laptop), please try to find the driver somewhere on the net. I found some info your unit has NeoMagic NM2200 (MagicMedia 256av) video card.

  To use an external monitor as a second monitor, or extended display just try to use the Windows settings in display properties.

• Tecra M2 PTM20E 'network controller' and pilots 'base system device '.

  Hello.

  I can't find drivers "network controller" and "base system device" Please tell me the exact name of the driver and the place for these drivers to download, I already checked under tecra M2 section but can't find any, please help.

  My operating system is windows xp

  Not for my machine model is toshiba tecra M2 PTM20E

  If I go to system information then I see problem thing it shows

  PCI\VEN_8086 & DEV_1043 & subsys

  Concerning

  Hi search this forum - tecra m2 - to 'base' or "yellow exclamation" and see my post that will sort you if all goes well.
  I don't know how to tie a link in this forum for you take directly to her.
  Posted by jarviei.

• SDA complaint Standard SD Host Controller - pilot

  Hi!, I am currently using a Lenovo W520. And I have a problem with my complaint SDA Standard SD Host Controller driver. Can someone direct me to solved this problem? Thank you.

  Hi, Imac_T-dot,

  Exactly what is the problem with the driver?

  In Device Manager, is there a yellow question mark, or an exclamation point?  Code error message?

  This is a new issue, or there is since childbirth?

  If it occurred recently, I suggest you try going back to a restore point before the show.

  What is the system restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If this has been a recurring problem over a period of months, etc... You may need to perform a full restore of your Windows operating system.

  Use this tool Lenovo diagnose and fix (in English)

  http://support.Lenovo.com/en_US/?menu-ID=support

• Tecra R840 - atikmpag.sys causes bluescreen

  Hello

  displaying videos on my Tecra R840 sometimes I get a blue screen with the atikmpag.sys driver.

  Happens to every time, but often - about one in four times or more.

  The blue screen occurs especially at the beginning of the video - but sometimes also in the end.

  In the download for my Tecra area, there is only one pilot display of 2012 - I have installed.

  I have Windows 7 64 bit, 8 GB of RAM and the AMD Radeon HD 6450 M.

  Does anyone have a tip for me?

  Thank you very much in advance

  Anne

  Hello

  Because this problem does not always, but sometimes, it would be very difficult to reproduce this BSOD and therefore, it is not very easy to say why the BSOD appears.

  Is that file atikmpag.sys belongs to the graphics card driver.
  It seems that the graphics card driver crashes, and therefore the BSOD occurs.
  But why?

  I have two different theories:
  (1) the graphics driver is not fully compatible with the new software installed, tools (games), etc., but the fact is that the Toshiba driver page does not provide all new GPU drivers for this model of laptop. The other point is that the same driver version worked correctly in the past and I m wondering why the same driver should not operate correctly now if it worked correctly in the past.

  (2) my 2nd theory is that the BSOD appears due to the higher temperature of the internal GPU. The highest temperature is mainly a reason for blockages of the system and also responsible for issues of the graphics card.

  Have you tried to reinstall/recover the system? Isn't it?
  I would recommend you do this using the Toshiba recovery disc. This procedure should always be made in the event of system problems.

  I also recommend you to clean the modules of cooling using a jet of compressed air. That would help you get rid of the dust. Dust is mainly a reason if it comes to a temperature higher inside the laptop.

• Driver missing for 120 MB superdisk

  I recently had to reformat my hard drive and in the process, I lost my driver for my 120 Mo Imation superdisk, I am running Windows XP.  Any suggestions how to get it back.

  Thank you

  Paul

  See below for possible driver Windows internal drive

  LINUX Info
  =================================
  Linux info
  LS-120 00 VER5 Matshita
  Firmware F522
  Location - Port 2 of the PATA host card
  Connection - SCSI
  ----------------------------------------------
  PATA host adapter
  Silicon Image
  PCI0680 Ultra ATA - 133 Host Controller
  pilot - pata_sil680
  Parallel ATA
  number of points: 2
  ================================

  Windows driver?
  http://members.DriverGuide.com/driver/detail.php?DriverID=131806

• USB 3.0 question! PLS HELP!

  I have acer aspire es1-131-P4YH model... the following questions, I am facing right now is...

  1. my USB 3.0 keeps cutting and restoring while I transfer files (usually from 200 at most) from or around - 3 key USB to the computer and vice versa. I have an ADATA 16 GB USB 3.0 UV150 key...

  I hit google and has almost everything fact...

  -usb energy saving suspend power management

  -"allow to disable usb energy saving" disabled for usb 3.0 extensible host controller, controller xHCI and also for same input device usb human interface device tab, and also when usb is plugged in, a new device from USB mass storage pop up... that is also disabled for this too...

  -uninstalled/removed all form tab USB controller and rebooted the computer to auto/load to reinstall drivers usb 3.0 - same question

  -one last thing, I have a usb 3.0 host adaptation pilot came with the laptop... Installed and hoped it would work now... but NO!... This is not the cd rom and usb 2.0 is used for the mouse... .so to transfer or install I especially need to rely on usb 3.0... someone had to help me out here... I'm in big trouble

  I received the netbook with windows 10 pre-installed... pro is this hardware problem or a driver problem

  ALSO, WHAT IS THE VERSION OF THE MODEL INTEL CHIPSET?

  Good so I think you can contact Acer directly for support

• XP installation hang at 34 minutes to complete

  Hello

  I am rebuilding a PC that stops installing XP Pro (SP 2 and 3), XP Home (SP1) and Vista at between 33 and 35 minutes to get everything as it is to install devices or I am trying the product reference - but sit (2000) entirely.

  It has a Ga-8IPE1000Pro2 motherboard with an update of the BIOS F10 (the problem has not changed with the update). It is a 2.8 GHz, chipset 865PE, Type of Socket 478, with 1 GB of DDR ram.

  I have deleted all unnecessary devices, exchanged everything with alternatives of working known including (IDE and SATA) HARD drive, Ram, graphics (AGP8x to PCI) card, cables, power supply, cleared the CMOS memory and flashed the BIOS.

  The PC had been used by a passion for games and I only replaced the drive HARD - not sure if it worked when last used by the previous owner.

  Is there BIOS settings that would not have been reset to the standard by clearing CMOS or BIOS flashing and selecting "optimized defaults"?

  The article kb828267 Microsoft Knowledge Base refers to that and I will try to reach the last page of the reading of the "setupapi.log" file after restarting the installation once it was broken.

  Can we see if the problem is a faulty motherboard or attached reading software problem?

  All suggestions are appretiated.

  cordially Wagga

  #I022 found "PCI\CC_0101" in C:\WINDOWS\inf\mshdc.inf; Feature: ' channel Double Standard PCI IDE Controller ". Pilot: "channel Standard dual PCI IDE controller". Supplier: "Microsoft." MFG: "(les contrôleurs Standard IDE ATA/ATAPI)"; " Section name: "pciide_Inst."
  Actual installation #I023 section: [pciide_Inst]. Rank: 0 x 00003006. Effective driver date: 01/07/2001.
  Found #I022 "PCI VEN_8086 & DEV_24DB" in C:\WINDOWS\inf\mshdc.inf; Feature: "Intel (r) 82801EB Ultra ATA Storage Controllers - 24DB. Pilot: "Intel (r) 82801EB Ultra ATA Storage Controllers - 24DB. Supplier: "Microsoft." MFG: "Intel." Section name: "intelide_Inst."
  Actual installation #I023 section: [intelide_Inst]. Rank: 0 x 00002001. Effective driver date: 01/07/2001.
  # 166 device install function: DIF_SELECTBESTCOMPATDRV.
  #I063 Selected driver installs from section [intelide_Inst] 'c:\windows\inf\mshdc.inf '.
  #I320 of the remains of the device class GUID: {4D36E96A-E325-11CE-BFC1-08002BE10318}.
  #I060 set driver selected.
  Best selected #I058 driver compatible.
  #-124 making copies only the installation of ' PCI VEN_8086 & DEV_24DB & SUBSYS_24D21458 & REV_02\3 & 13C0B0C5 & 0 & F9.
  # 166 device install function: DIF_INSTALLDEVICEFILES.
  #W383 'layout. PNF"migrates: PNF language = 0409, Thread = 0809.
  # 011 installation section [intelide_Inst] of "c:\windows\inf\mshdc.inf".
  #W383 'layout. PNF"migrates: PNF language = 0409, Thread = 0809.
  # 166 device install function: DIF_REGISTER_COINSTALLERS.
  #I056 coinstallers registered.
  # 166 device install function: DIF_INSTALLINTERFACES.
  # 011 installation section [intelide_Inst.Interfaces] of "c:\windows\inf\mshdc.inf".
  #I054 interfaces installed.
  # 166 device install function: DIF_INSTALLDEVICE.
  #I123 do a full install of ' PCI VEN_8086 & DEV_24DB & SUBSYS_24D21458 & REV_02\3 & 13C0B0C5 & 0 & F9.
  #W100 query remove the installation of ' PCI VEN_8086 & DEV_24DB & SUBSYS_24D21458 & REV_02\3 & 13C0B0C5 & 0 & F9 ' has been blocked by "IDE\DiskST38421A___6.01___\4233304435393032202020202020202020202020" (veto type 6: PNP_VetoDevice).
  Peripheral #W104 "PCI VEN_8086 & DEV_24DB & SUBSYS_24D21458 & REV_02\3 & 13C0B0C5 & 0 & F9" required reboot: query remove failed (install) CfgMgr32 returned: 0 x 17: CR_REMOVE_VETOED.
  Device #I121 of ' PCI VEN_8086 & DEV_24DB & SUBSYS_24D21458 & REV_02\3 & 13C0B0C5 & 0 & F9 ' completed successfully.
  [01/07/2012 07:46:54 296.1087 driver Install]
  # 019 Searching for hardware ID: PCI VEN_8086 & dev_24d7 & subsys_24d21458 & rev_02, PCI VEN_8086 & dev_24d7 & subsys_24d21458, PCI VEN_8086 & dev_24d7 & cc_0c0300, PCI VEN_8086 & dev_24d7 & cc_0c03
  # 018 search compatible ID: PCI VEN_8086 & dev_24d7 & rev_02 PCI VEN_8086 & dev_24d7, PCI VEN_8086 & cc_0c0300, PCI VEN_8086 & cc_0c03, PCI VEN_8086, pci\cc_0c0300, pci\cc_0c03
  # 199 Executing "C:\WINDOWS\system32\setup.exe" with the command line: setup - newsetup
  #I022 found "PCI\CC_0C0300" in C:\WINDOWS\inf\usbport.inf; Feature: "Standard universal PCI to USB Host Controller"; Pilot: "Standard universal PCI to USB Host Controller"; Supplier: "Microsoft." MFG: "(contrôleur d'hôte USB Standard)"; " Section name: "UHCI. Dev»
  #I023 actual installation section: [UHCI. Dev.NT]. Rank: 0 x 00002005. Effective driver date: 01/07/2001.
  Found #I022 "PCI VEN_8086 & DEV_24D7" in C:\WINDOWS\inf\usbport.inf; Feature: "Intel (r) 82801EB USB Universal Host Controller - 24-7." Pilot: "Intel (r) 82801EB USB Universal Host Controller - 24-7." Supplier: "Microsoft." MFG: "Intel." Section name: "UHCI. Dev»
  #I023 actual installation section: [UHCI. Dev.NT]. Rank: 0 x 00002001. Effective driver date: 01/07/2001.
  # 166 device install function: DIF_SELECTBESTCOMPATDRV.
  #I063 Selected driver installs from section [UHCI. Dev] in 'c:\windows\inf\usbport.inf '.
  #I320 of the remains of the device class GUID: (36FC9E60-C465-11CF-8056-444553540000).
  #I060 set driver selected.
  Best selected #I058 driver compatible.
  #-124 making copies only the installation of ' PCI VEN_8086 & DEV_24D7 & SUBSYS_24D21458 & REV_02\3 & 13C0B0C5 & 0 & EA.
  # 166 device install function: DIF_INSTALLDEVICEFILES.
  #W383 'LAYOUT. PNF"migrates: PNF language = 0409, Thread = 0809.
  # 011 installation section [UHCI. Dev.NT] of "c:\windows\inf\usbport.inf".
  #W383 'LAYOUT. PNF"migrates: PNF language = 0409, Thread = 0809.
  #-340 extract file "usbport.sys" in the closet "C:\WINDOWS\Driver Cache\i386\driver.cab" to "C:\WINDOWS\system32\drivers\SET2BC.tmp" (the target is "C:\WINDOWS\system32\drivers\usbport.sys").
  # 024 copies the file "C:\WINDOWS\system32\drivers\SET2BC.tmp" to "C:\WINDOWS\system32\drivers\usbport.sys.
  #E360 year not or incorrectly signed file "C:\WINDOWS\system32\drivers\SET2BC.tmp" for the driver "Intel (r) 82801EB USB Universal Host Controller - 24 D 7" will be installed (policy = ignore). "." Error 0x800b0100: no signature was present in the subject.
  # 166 device install function: DIF_REGISTER_COINSTALLERS.
  #I056 coinstallers registered.
  # 166 device install function: DIF_INSTALLINTERFACES.
  # 011 installation section [UHCI. Dev.NT.Interfaces] of "c:\windows\inf\usbport.inf".
  #I054 interfaces installed.
  # 166 device install function: DIF_INSTALLDEVICE.
  #I123 do a full install of ' PCI VEN_8086 & DEV_24D7 & SUBSYS_24D21458 & REV_02\3 & 13C0B0C5 & 0 & EA.
  Device #I121 of ' PCI VEN_8086 & DEV_24D7 & SUBSYS_24D21458 & REV_02\3 & 13C0B0C5 & 0 & EA ' completed successfully.
  [01/07/2012 07:46:57 296.1091 driver Install]
  # 019 Searching for hardware ID: PCI VEN_8086 & dev_24d5 & subsys_a0021458 & rev_02, PCI VEN_8086 & dev_24d5 & subsys_a0021458, PCI VEN_8086 & dev_24d5 & cc_040100, PCI VEN_8086 & dev_24d5 & cc_0401
  # 018 search compatible ID: PCI VEN_8086 & dev_24d5 & rev_02 PCI VEN_8086 & dev_24d5, PCI VEN_8086 & cc_040100, PCI VEN_8086 & cc_0401, PCI VEN_8086, pci\cc_040100, pci\cc_0401
  # 199 Executing "C:\WINDOWS\system32\setup.exe" with the command line: setup - newsetup
  # 166 device install function: DIF_SELECTBESTCOMPATDRV.
  #W059 selection best compatible driver failed. Error 0xe0000228: there is no compatible driver for this device.
  #W157 default Installer failed. Error 0xe0000228: there is no compatible driver for this device.
  #I060 set driver selected.
  # 166 device install function: DIF_INSTALLDEVICE.
  #I125 installing NULL driver for "PCI VEN_8086 & DEV_24D5 & SUBSYS_A0021458 & REV_02\3 & 13C0B0C5 & 0 & FD.
  #E122 device failed. Error 0xe0000219: the installation failed because a function driver was not specified for this device instance.
  #E157 default Installer failed. Error 0xe0000219: the installation failed because a function driver was not specified for this device instance.
  # 166 device install function: DIF_INSTALLDEVICE.
  #I125 installing NULL driver for "PCI VEN_8086 & DEV_24D5 & SUBSYS_A0021458 & REV_02\3 & 13C0B0C5 & 0 & FD.
  Device #I121 of ' PCI VEN_8086 & DEV_24D5 & SUBSYS_A0021458 & REV_02\3 & 13C0B0C5 & 0 & FD ' completed successfully.
  [01/07/2012 07:46:58 296.1093 driver Install]
  # 019 Searching for hardware ID: PCI VEN_8086 & dev_24d4 & subsys_24d21458 & rev_02, PCI VEN_8086 & dev_24d4 & subsys_24d21458, PCI VEN_8086 & dev_24d4 & cc_0c0300, PCI VEN_8086 & dev_24d4 & cc_0c03
  # 018 search compatible ID: PCI VEN_8086 & dev_24d4 & rev_02 PCI VEN_8086 & dev_24d4, PCI VEN_8086 & cc_0c0300, PCI VEN_8086 & cc_0c03, PCI VEN_8086, pci\cc_0c0300, pci\cc_0c03
  # 199 Executing "C:\WINDOWS\system32\setup.exe" with the command line: setup - newsetup
  #I022 found "PCI\CC_0C0300" in C:\WINDOWS\inf\usbport.inf; Feature: "Standard universal PCI to USB Host Controller"; Pilot: "Standard universal PCI to USB Host Controller"; Supplier: "Microsoft." MFG: "(contrôleur d'hôte USB Standard)"; " Section name: "UHCI. Dev»
  #I023 actual installation section: [UHCI. Dev.NT]. Rank: 0 x 00002005. Effective driver date: 01/07/2001.
  Found #I022 "PCI VEN_8086 & DEV_24D4" in C:\WINDOWS\inf\usbport.inf; Feature: "Intel (r) 82801EB USB Universal Host Controller - 24-4; Pilot: "Intel (r) 82801EB USB Universal Host Controller - 24-4; Supplier: "Microsoft." MFG: "Intel." Section name: "UHCI. Dev»
  #I023 actual installation section: [UHCI. Dev.NT]. Rank: 0 x 00002001. Effective driver date: 01/07/2001.
  # 166 device install function: DIF_SELECTBESTCOMPATDRV.
  #I063 Selected driver installs from section [UHCI. Dev] in 'c:\windows\inf\usbport.inf '.
  #I320 of the remains of the device class GUID: (36FC9E60-C465-11CF-8056-444553540000).
  #I060 set driver selected.
  Best selected #I058 driver compatible.
  #-124 making copies only the installation of ' PCI VEN_8086 & DEV_24D4 & SUBSYS_24D21458 & REV_02\3 & 13C0B0C5 & 0 & E9.
  # 166 device install function: DIF_INSTALLDEVICEFILES.
  #W383 'LAYOUT. PNF"migrates: PNF language = 0409, Thread = 0809.
  # 011 installation section [UHCI. Dev.NT] of "c:\windows\inf\usbport.inf".
  [01/07/2012 08:07:24 296,1]
  # 199 Executing "C:\WINDOWS\system32\setup.exe" with the command line: setup - newsetup
  #W383 'syssetup. PNF"migrates: PNF language = 0809, Thread = 0409.
  REGISTERDLLS #-290 processing section [CryptoDlls]. Binary: '% 11%\rsaenh.dll', flags: 0x0001, time-out: 60 years.
  #W374 digital signature verification has been ignored for a saved file ("C:\WINDOWS\system32\rsaenh.dll").
  REGISTERDLLS #-290 processing section [CryptoDlls]. Binary: '% 11%\dssenh.dll', flags: 0x0001, time-out: 60 years.
  #W374 digital signature verification has been ignored for a saved file ("C:\WINDOWS\system32\dssenh.dll").
  REGISTERDLLS #-290 processing section [CryptoDlls]. Binary: '% 11%\initpki.dll', flags: 0x0001, timeout: 600 s.
  #W374 digital signature verification has been ignored for a saved file ("C:\WINDOWS\system32\initpki.dll").

  I tried the repair after installing XP Pro on a drive using the old PC, and then put this HARD drive in the defective PC.

  Yes, you can not install Windows on a hard disk on a computer then put the hard drive in another computer and loading Windows. This will simply not work.

  The offer for the family image of Windows XP Edition is for you to use as nothing more than a test to see if there might be a problem with your drive. As Vista installs without problem, I wonder if it could be a driver problem. It is also attested by the fact that the complete repair facility.  I'll do more research and after return.

  With respect to the loading of the log file, downloads are not allowed on MS Answers. You must use a host like Mediafire or similar file. Please do so in the future if we need to review the log files. This avoids long threads.

• Superdisk 120 MB for Windows XP driver

  Recently I had to reformat my hard drive.  I use Windows XP and the pilot lost my Imation Superdisk 120 MB drive.  Any suggestions how to get it?

  Thank you

  Paul

  My Info, look at the bottom for possible XP driver for internal drive

  LINUX Info
  =================================
  Linux info
  LS-120 00 VER5 Matshita
  Firmware F522
  Location - Port 2 of the PATA host card
  Connection - SCSI
  ----------------------------------------------
  PATA host adapter
  Silicon Image
  PCI0680 Ultra ATA - 133 Host Controller
  pilot - pata_sil680
  Parallel ATA
  number of points: 2
  ================================

  Windows driver?
  http://members.DriverGuide.com/driver/detail.php?DriverID=131806

• HP LaserJet P1505n necessary device drivers.

  Where can I find Windows Server 2008 drivers x 32 & x 64 for HP LaserJet P1505n peripheral? I find HP Driver Support and was unable to find drivers for this device.

  Hi mbaranowski,

  There is not a driver of HP for Server 2 k 8 (32-bit or 64-bit) that the product is released about 4 years ago.

  However, what I would like to try in this situation is either:

  (a) host Based pilot PnP for 2 k 3

  -Download the pilot PnP (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-55240-6&cc=us&dlc=en&lc=en&os=1005&product=3435668&sw_lang=) based host to Server 2 k 3.

  -Use a program such as 7zip to extract the exe files.

  -Install the printer pointing to the .inf

  or,

  (b) attempt to install using the UPD (Universal Print Driver) - http://h20331.www2.hp.com/hpsub/cache/343033-0-0-225-121.html?jumpid=ex_r2845_go/upd

  Note: As indicated in the table below, the P1505 is not listed as supported a product... but it is worth trying.

  Hope this helps

• driver & software download server "too busy"?

  I was downloading the drivers and software for my new S10-3 last night, when suddenly I couldn't on the Lenovo site. I kept receiving an error message 'server busy '.

  This continued on during all day Sunday also. What is happening on that a big company like Lenovo cannot host their pilot with adequate capacity download server? It's very frustrating and do not replicate a lot of confidence.

  Does anyone else know the same thing?

  Weekends are sometimes used for maintenance purposes, so you can deal with a problem. Give it a shot Monday

• Install W2K on Tecra 8100

  Hi all

  I am trying to install W2K on a Tecra 8100, but I think I'm doing something wrong, because it keeps failing.

  If I just insert the CD it starts to start a load several files at a time when the Setup starts Windows 2000 (present at the bottom of the screen) and the installation crashes with a blue screen and the c0000221 error material unknown error \systemRoot\System32\ntdll.dll
  I read that, during installation, you will need to press F5 (in the screen where you can load a SCSI or raid driver) and then choose Advanced Configuration and Power Interface (ACPI) PC, but after doing this I get the same error.
  I have no additional material attached, it's original configuration.

  Any thoughts on how to solve this problem and get W2K on my laptop?

  Hello

  I think that this question has nothing to do with the Advanced Configuration and Power Interface (ACPI) or similar.

  I read about the error systemRoot\System32\ntdll.dll message, and there is no particular reason for this error.
  Sometimes some service packs missing cause this problem and sometimes hardware malfunction (RAM or HARD drive) could be responsible for a BSOD.

  You are able to install Win XP?

• Re: Need driver USB HOST for Tecra 520CDT

  TOSHIBA TECRA 520CDT USB HOST DRIVER NEEDED

  May I ask why you need this driver?
  What OS do you have?

  Maybe you don t know a USB drivers are part of the windows operating systems and it of not possible to download it separately!

• Tecra A2 asks pilot HAL (ACPI) while XP insatallation

  Hello
  Hope one of you can help me with little of the issue concerning the relocation of a Tecra A2.
  One of my coluges have an and I crashed the HD and have lost the CD reinsatll :-(

  I hate portable reinsalling, when there is no recovery media :-(
  So I hopw someone can tell me what follows, it is my first Toshiba for many years.

  I would like to install the computer for him with a windows xp Pro sp2, but during the installation it asked you HAL (ACPI) driver, is there a special for this model or what schould I select in the list?

  When I install with a standard ACPI driver and install the drivers for Tectra A2, most of the computer works, but when I restart, windows gives me a bootmenu recovery, is anyway to get rid of this?

  I installed the latest version of the bios, and and and, but now I need help.

  Thanks in advance :-)

  / Kilsgaard Graves

  Hello

  First something about HAL if someone doesn t know what HAL:
  Well, I found this:
  Microsoft provides the ACPI driver as part of the operating system. On systems that have an ACPI BIOS, the HAL causes the ACPI driver to load when you start the system at the base of the tree devices, where the pilot acts as interface between the operating system and the BIOS.

  As far as I know the recovery CD contains Windows XP SP1a.
  I visited the page of the Toshiba driver and found that there are several drivers that are required to install the operating system.
  Intel Chipset Software Installation Utility V5.0.2.1002
  Intel Q332179 mobile CPU driver
  Fix for sysprep.exe Q824672
  Fix for 'Windows XP SP1 compatibility problems' Q329623
  Fix for 'Windows XP USB 2.0 Driver' KB822603

  And so on

  I think you should fund a clean win boot CD using nLite and chipset and all the patches of the Toshiba page should be integrated.
  But the simplest to install the operating system recovery CD. You can order the ASP in your country