Tecra A9 - 12 H - Touchpad does not

Similar Questions

• Tecra M3 - touchpad does not work with Windows 7

  I have a Tecra M3 I've updgraded to Windows 7. The touchpad does not work.
  The Web of Toshiba site has a Windows 7 drivers for this model. I tried install the driver of the touchpad and PVAT from the A11 model but still cannot make it work.

  Can anyone help? The audio is not working either.

  This old Tecra is not supported for Vista, so it can be difficult to find the correct drivers.
  I can see Tecra M4 is supported for 32-bit Vista, so use this with Win7 32-bit Vista driver in the hope that this will work.

  Audio driver? Let Win7 look good pilot. By the way: your Tecra has AnalogDevices AD1981B audio chip inside. Try to find the right driver Googling autour.

• Mouse/Touchpad does not work

  I have a hp 2000-bf69wm, 8 64-bit windows.

  The touchpad does not work and is not a mouse cursor. Any suggestions?

  You could try a Hard Reset.

  Forced to Power Reset - "Hard Reset".

  • Perform the Hard Reset .  Start the computer and connect

  Hard Reset is a reset of the driver; This isn't Windows 8 resetting that installs the operating system.  The procedure to hard reset does not erase your files or it destroys your Windows installation somehow.

  Why a power reset works to solve some problems:

  Hard Reset erases the pilot instructions that generally persist to boot-to-boot.  The Hard Reset is a way to force the computer to read the instructions of drivers and software stored in the operating system.  The compensation action and forcing a new reading on the disk and software drivers can solve some problems.

  Sign in and check...

  =====================================================================================

  Find, open, and read the following file named: difficulty TouchPad / ClickPad

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Qosmio X 300 - 11W - TouchPad does not work in mode 'sleep'

  TouchPad does not work in mode 'sleep'. I can't wake up my computer using a touchpad. I downloaded and installed a driver for Windows 7 32 bit from a page of the Synaptics driver, but it did not help.

  Can you wake up your Qosmio using the power button / stop?
  You close the lid when the laptop enters the sliding mode?
  After you open the laptop lid should wake up. It work correctly?

• Satellite A0302 C50D and Ubuntu 12.04.4 - touchpad does not work so well

  I have a Satellite C50D-A0302, PSCGWF part number.
  I use Ubuntu 12.04.4 LTS Pangolin specific to this topic, but the touchpad does not work so well.

  How can I get the right drivers for the touchpad?

  How do I know if the touchpad is Synaptics or ALPS, so I can get the correct drivers?

  Thank you!

  As you probably know Toshiba does not support Linux and does not offer Linux drivers.
  All about you Googling can find many Linux forums. Try to find useful information here. I mean you can exchange your experiences with other people who are fans of Linux and experts, so I assume that you can get help here.

• Satellite U940-103 with Linux - Touchpad does not & poorly programmed FN keys

  Hello

  I bought a toshiba Satellite U940-103, and I installed ubuntu 13,10 dual boot with windows 8.1.

  The problem is that the touchpad is not working and the fn are false (fn f2 key suspend the computer instead of the brightness control).

  I tried to install linux different sistem (Mint cinnamon 15, 13.04 ubuntu, ubuntu 12.04.3) but they still have the same problem, even in the live cd.

  I tried to ask the Italian Forum of ubuntu, but they have solutions do not work...

  Thanks for the help
  Yun

  * PS.* sorry for my bad English. Is it normal that my laptop seems overheated and my battery life seems to be reduced when I use Linux?

  Hello

  Yes, you're right!
  In the direct (stable mode without having to install), the touchpad does not work.

  However, once installed, it will work.

  In regards to shortcut keys, yes they are mapped correctly.
  They are treated to the old-fashioned way (former Toshiba models had the mapping used by Linux on this model).
  If you want help, file a bug report on bugs to Ubuntu system.

  You can always change the brightness by using the GUI (Control Panel > brightness & Lock).

  Fun with Ubuntu on your device!

  Tom BR

• Satellite PRO A200-1 s 1 with Windows 7 x 32. Touchpad does not work

  Hello world
  I installed Windows 7 on my Satellite Pro A200-1 s 1, recovered all the drivers on the Toshiba site, everything works fine (less than the webcam that doesn't work even with the previous s.o. XP or Vista...). But my Touchpad does not work... No Fn + F9, no drivers, nothing works. And in my control, Manager of Panel devices seem to be going well.
  Any suggestion?

  Hello

  You reinstall the driver for the touchpad?
  Check it!

  Also check if the option disable touchpad when USB mouse is connected is not checked. That are in the control panel-> mouse-> device settings

• HP Pavilion TouchPad does not?

  Hello, I have the HP Pavilion dm4 2015-dx and this morning when I started my computer the touchpad does not work. I use a mouse and it works fine however. I tried the download Synaptics and followed the instructions but it didn't work. Help!

  Mastiucha,

  Take a look at this document - file mentions the methods used to enable / disable the TouchPad.

  You could jump repeat the reset method.

  Enable / disable the TouchPad

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts.

• Touchpad does not work after the removal of the Satellite U400-18F

  Hello

  Yesterday I disassembled my Toshiba Satellite U400-18f to clean dust fan, I unplugged all the cables except the cable touchpad I tried to pull up, but nothing happened, so I went back just as it was before.

  My laptop worked fine except the touchpad does not work!
  So please someone know how to unplug this cable so I can fix it...

  http://img841.imageshack.us/img841/4549/removetopcover17.jpg

  Thank you

  There must be some problem with contact. I recommend to unlock touchpad wire, put it back in place and simply lock again.

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards

• Satellite A350 - Touchpad does not work, but an external mouse works

  Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

  I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

  What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

  Thank you, and sorry for my bad English. :-(

  Hello!

  The touchpad does appear in Device Manager or you have here yellow exclamation points?

  Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
  Did you check that?

  In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• My touchpad does not work well on Satellite C55-A-1ND

  For several days my touchpad does not work well. It has nothing to do with the power touchpad button on the F5 key.

  The touchpad is most time does not and something a bit but I can't use the touchpad at all now.

  When I attach my external mouse on my laptop I can use my laptop otherwise I can't use my laptop.
  I already rebooted my laptop several times, but it helps not at all.

  I hope someone can help me!

  You said that this issue has nothing to do with the touchpad on/off function s.
  So what's exactly wrong with the touchpad? Is he disabled or enabled?

  Have you checked the settings in the control panel-> mouse-> last (device settings) tab-> settings button?

  Have you already tried to reinstall the software/driver for touchpad?
  If this is not the case, do.

  By the way: what model of laptop and what system you have?

• Satellite C850D-11 q - keyboard and the Touchpad does not

  The laptop is a little more than a year and worked ok until recently.

  Symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.

  He progressed to the keyboard and the touchpad works do not randomly points while the use of the laptop.

  Finally cleared the HARD drive and restored windows 8 alone, the laptop still BSOD quite frequently - refuses to install the updates required for 8.1 and the keyboard and mouse often do not work even in BIOS Setup page. I reinstalled the RAM and HARD drive.

  Short of ideas, the keyboard and the touchpad work and so I guess that their connections are correct - but often they just stop.

  Any ideas appreciated?

  Thank you

  Hello

  > Finally cleared the HARD drive and restored windows 8 only
  I hope that you created before Toshiba recovery disks you have formatted the system.
  Did you?

  The recovery disks will allow you to reset the laptop to factory settings; on the same State as at the first day of the purchase.

  > First symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.
  Well, usually the keyboard problems are not problems system or software as the keyboard driver is part of the system and an additional installation of some drivers is not really essential and necessary.
  That is why in most of the cases the keyboard problems could be the causes of physical problems.

  However, after using the recovery disc and the parameters of the laptop back to factory State, both parties (keyboard and touchpad) should work perfectly.

  > the BSOD laptop still quite frequently - refuses to install the updates required for 8.1
  BSOD doesn't look very good. As mentioned above; parameters of the laptop back to factory settings should solve all the problems in the system. In the case where the BSOD appears even if the power has been turned back to factory State, a hardware problem could be the reason for this.

  I had also some problems with the update 8.1 Win. The system to win 8 could not find the Win 8.1.
  But the reason for this was simply. I had to install all updates to Win 8 and had to update the State system before trying to update to the next level following 8.1 Win

  So, what can I say: I will try to put the laptop initial configuration using the recovery disk.
  Then I would try to get automatic updates (a few reboots were essential too). After that, I would check the functionality of the keyboard and the touchpad. In the case where them parts would not work, I would contact the service to check if the two pieces.