Tecra M10 - will not do a 1080 p screen resolution

Similar Questions

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Windows 7 sees my second monitor as "generic non - PnP" and will not let me set the correct resolution

  Hello

  I just installed Windows 7 Professional 64 bit on a new hard drive on my Dell Studio 540. The PC has a graphics card ATI Radeon HD 3450 and has a Samsung 226bw 22 "monitor on the digital output. This works very well, and has the resolution of 1650 x 4050. When I am running Vista (on the previous hard drive), I got a monitor flat 14 "old on the other out, and it worked fine (although at a lower resolution).

  I added a monitor AOC F22s + on the other output, expecting to be able to put this to the recommended 1920 x 1080 resolution. Unfortunately, Windows has developed the driver for this monitor "Generic non - PnP" and will not let me set the correct resolution. To the maximum it will allow is 1600 x 1200, (as well as all other resolutions it allows) do not use the monitor at maximum capacity, which is the ratio of evil anyway, so the display seems tense.

  I run Windows Update, so have the latest drivers. I tried to install the other drivers, but nothing helped.

  I tried to unplug the Samsung monitor and restart the PC, so that the AOC, one was the only monitor it and he always had as 'Generic non - PnP' with the wrong resolution.

  Someone at - it ideas? I'm at my wits end. AOC support did not understand and could only suggest that the monitor was faulty, but the place where I bought it insist that it works very well and so no Exchange or get a refund (no restocking fee, which is a RIP-OFF).

  I really want to use both screens and would appreciate greatly any help that anyone can give. I hope I gave enough information. If I didn't, please let me know.

  Thanks in advance,

  Alan

  PROBLEM SOLVED!

  It turned out that my VGA cable was wrong and that it was not send the right signal to the computer. The screen worked fine with a VGA monitor, but the PC has not said that the new monitor is a PnP I tried a different cable and it worked fine.

  Thanks again to all who have suggested things.

• E260 will not go past the opening screen

  I got my 260 E for about a year and later that yesterday I went to turn it on, but it remains on the logon screen. Enter mode 'sleep', but I can't listen to music or find out anything because it will not go beyond the opening screen. The second of 10-15 soft reset I tried a hundred times, but it does not work.

  If remove/insert the battery did not work, the next step would be to format the drive.  You can also try to update the firmware.  I hope that you have a model v1.  What does say on the back of the drive?  Do you see a blue Sansa logo on the splash screen?  If so, you have a model v2 with no recovery mode.

  Assuming you have a v1 with the recovery mode:

  1. Turn off the player.
  2. Slide the key lock (to headphone jack).
  3. Press and hold the RECORD when connecting to the PC.
  4. Output RECORD when the "Welcome to recovery mode" message on the LCD s drive.
  5. Open my computer/Windows explore and see if you can find a new "16 MB - FORMAT" labeled removable flash drive
  6. Right-click on 16 MB-FORMAT and select new folder.
  7. Name the new folder "sansa.fmt" (without the quotes).
  8. Use the remove safely icon in the system tray.
  9. HOLD reset in the unlocked position.
  10. Disconnect the player from the PC.

  The player must, by seeing the folder sansa.fmt in the root directory of the drive, proceed to format itself.  Pay attention to any error/success message see you.  If all goes well, it will tell the full format and then to restart.

  DO NOT TRY TO FORMAT THE VOLUME 16 MB-FORMAT!

  If the format does not work, the next step is to try to update the firmware.  Go to the correct sticky message and download the firmware for your region .24A (assuming that he is a player of v1).  Drag and drop the embedded .mi4 and ROM files of archive of the firmware in the root directory of the 16 MB-FORMAT drive.  Make sure that the files end up in the root directory and not in a subdirectory.  Unplug and restart the player as before.

• Can't reinstall Vista. Because Vista will not get to the Setup screen.

  Hi people. Got a prob a little. Vista stopped booting the other night. So, I tried safe mode, and it hung on crcdisk.sys. So, I decided to get in shape. Problem is, it will boot from the DVD, but will not load / access the Setup screen (I waited for 7-8 minutes and nothing's happened, shows just the thing with the green bar).

  Not too sure if it's because the hard drive is 1 TB (but Vista was on the same front hdd with Windows 7). I tried to remove the 2 GB of ram (I use 4). No go. Tried another DVD rom, not go. Removed USB devices that have been connected. No go. I know that the DVD itself is fine. I tried on the other PC here, the installation screen came within 2-3 minutes. But his is not a 1 to (its 250 GB) the only DVD that will work / I install is the Windows 7 DVD.  So, how can I reinstall Vista?

  I deleted all partitions / recreated with the Win7 installation as well. Still couldn't get Vista to get to the Setup screen

  Any info appreciated

  Thank you

  Finally fixed it. I read that USB legacy can also cause this. So, I disabled it. Everything is good. Managed to get to the Setup screen, then reinstall Vista

• Windows 8 does not work on my netbook. screen resolution is too small.

  Windows 8 does not work on my netbook. screen resolution is too small. Miicrosoft does not refund my purchase.

  I had the same problem with my Asus EeePC Netbook. The highest resolution was 1024 x 600. I was able to change it by changing the settings of register of Display1_DownScalingSupported in 1152 x 864 (two entries) from 0 to 1. Proceed at your own risk.

• Tecra 9100 will not read burn them

  Hello.

  I have a Tecra T9100 and CARPET * DVDROM has now won ' t * burned to CD playback.
  He has no problem reading manufacturing CD / DVD.

  I noticed this after upgrading the BIOS by version 1.6.

  Is there anything else I need to do / configure / install?

  Thank you.

  Hello

  Maybe you need to check the different CDs from different manufacturers and should change the slower burning at that speed.

  If this will not help then a CD/DVD drive problem could be the reason why don't not all disks are readable.

  See you soon

• Tecra M9 - will not power on and flashing LED

  Can someone tell me where I can find a list of what means the various sequences of flashing of LED on a Tecra M9?

  I have one that will not be running at all and the power light flashes a particular model of amber.

  Toshiba Tecra M9
  PTM91E-04R03TEN

  Hello

  I think that such a list of error codes for the LEDs are not available. I've never seen such lists on the Toshiba site, I guess they are no longer available to the authorized service provider.

  But you can try this: remove the battery and the AC adapter at least an hour. Then connect the two devices again and try to start the laptop.

  If it doesn t work an ASP needs to ask for help. They can give you professional help and fix it.

• Tecra M10 - GPS not taken in charge after the update of the WLAN driver

  Hi all

  I have a Tecra M10 with brod f3507g mobile modem. After Wireless manager driver update (suggested by TEMPRO) gps utility is not working: the error msg is "gps not supported!

  Of course before the driver update gps worked fine.

  Anybody experinced same problem?
  What can I do to fix this?

  Thank you

  Hi ouebgi,

  Have you ever tried to restore the old WLAN driver in Device Manager? There are a restore function for the previous version of the driver and you should try it!

• Tecra M1 will not read any type of SD card

  Help!
  According to the title, my M1 will not read any type of SD card. I'm running the SP2 of XP reloaded from original floppies, and it is fully up-to-date with Windows Update.
  The little green light adjacent to the slot flashes briefly on the insertion of a card, but nothing happening for example no open option window and nothing visible in my computer.

  I downloaded the latest drivers and installed according to the directives of the readme.txt file and even thought to copy the SDDEVMGR.dll in the System32 folder.
  I obviously lack something, so any help or pointers are welcome.

  Thank you very much. Craig

  Hello

  Usually, books are not all sizes of SD card and so you should be sure that the used SD card is supported and compatible with the Tecra M1 card reader.

  But if you are using a compatible SD card the laptop should be able to read/write on the SD card.
  I try to remove the SD card in the Device Manager controller and remove the driver software malfunction. Restart the computer and install the latest drivers again.

  PS: A registry cleaning would be desirable. CCleaner is a great registry cleaning applications

• Tecra M5 - will not be in hibernation or standby to standard Select-Bay drive inserted

  My Tecra M5 passes not in standby or sleep mode when it is selected in the menu start/stop. This is only a problem when the standard Toshiba CD player is inserted in select Bay. Once removed, it will be put into hibernation. Certainly this isn't something you should do every time?
  Any ideas?

  I think that you are the first person who says something like that. Is the STRANGE empty when you try to use standby or Hibernation mode?

  In any case, it's really strange question. Certainly, something like that shouldn't happen. Have you noticed that since the first day? How long do you use your Tecra? Is there a similar situation when you use FN + F4 or FN + F3 keycombination?

• My Tecra S1 will NOT start!

  I have a Toshiba Tecra S1, that will not start. When powered on it gives me a repetitive beep code. The fan starts, only the power light come ON but the screen remains empty.

  The code goes like this: 2 Short emits a beep then one long beep, pause, then 3 short beeps.

  What is the problem with it and what can do?

  Hi Chris

  Of course, there is a hardware problem. Contact service partner in your country. They may include cela beep code. Unfortunately there is no public document on explanation of code.

• Pavilion x 360-13-a110dx: HP technical support will not fix a broken warranty screen

  Computer tech support rant:

  So I treat my electronics with care. For some strange reason, recently developed a crack on the touch screen of my combo of tablet or a laptop HP Pavilion 360. The thing is usable, and the slot is under the top layer there so no finger injury if I touch the screen. But he fixed it needs, so I filled in the online form to explain my problem to a solution of warranty. I was then told I can call to track and match an option repair or by e-mail. Very well, very well. No problem. I'll call. I can do things with the phone on speaker.

  An hour and 20 minutes later and three of call center foreign representatives who were not clear of the USA (meets one, one was a tech rep, and then he couldn't do the actual sending in and fix the situation so I went to a representative cost and repair to figure out how to fix it), and I'm mad on fire. First of all, all three repeat what I wrote and asked questions as if I'm lying to them, or did not know what I did wrong. We had the audacity to ask how do I close my laptop. Yes Ma'am, I slam it down as hard as I can and throw it against the wall to see what happens and make sure that it shuts down for the night. (I did say that, but may as well have.) I'm on my products.

  She said that it would cost $270 to fix. Wait, $270? She said because it was a screen problem, it costs money. I said that it is under warranty. Equipment is under warranty, no software apparently. But this isn't the software, it's a HARD to the device component. I can't just install and uninstall a touchscreen. I'm paying $270 plus delivery charges when I bought in May last for $350. If I pay that much for setting a screen, I may as well buy a new unit that is faster and more up-to-date.

  She said that it would increase it to a supervisor. They were not available after 18 pm, et. I said I work next week, leaving the House at 6:30 et and will not be home until after 18 pm, et. I said that I should call after 6 p.m., HE. I can't take the time during the day to discuss my PC because if this call took 1h20m, I don't have this time to a new job.

  Then, suddenly, they can call me after 18 pm, et. When they do it on Monday, if he is a foreigner, I'll ask an English person precise and clear language. I'm not trying to be racist, then falsely accuse me if you want, but when it comes to communication, and there is a problematic thick accent because English is not their native language in India or wherever they are, this is a serious matter. If I do not understand the words coming out of their mouth without having to constantly ask for something repeatedly or super attentive because if I'm not I can miss a word that misinterprets the whole sentence, which is good enough for me. I've been at both ends of the customer service, so talk to someone English * IS * critical, especially when the situation is bad. I want an American on this one.

  Either they fix it for free AND fix it on a quick as soon as POSSIBLE process (because frankly, I was insulted with how they treated me and the hold time every time to ask the same questions and made to be a perpetrator of my machine), or I am done with HP/Compaq products after 15 years of loyalty to them. Really, I don't expect even a call Monday from HP. I doubt that someone calls me.

  And for what it's worth, what computer HP from my ex-wife was a breach of the hinge, which was material. I might took pliers and broke on purpose. But they don't set any question. But a screen which has not been clearly cracked by me (trust me, I could take a hammer to it and make a spider web crack) are not treated and is not material? What is it? TouchWare a new term? If it is not material, I want to know what it is. And I don't like what the said guarantee, if you send a defective product that lasts not even eight months (if), you need to fix. I did take a hammer to my screen, I do not slam my PC or throw it against something, and it's in a protective case when I travel, and it is placed in a safe place when not in use. In fact, I barely use the touchscreen. But still I'm done feeling it is my fault and I have to pay $270?

  I would like to fix it myself with pieces on Amazon, but must completely disassemble the screen of the keyboard part part and it's a mess and not worth. I'm going to buy a new something and be done with it. But for a crack I did not cause - and if they were seen, they would know because the crack is below and not something that I can do on top - and say $270? Kiss my rear. Repair at our expense, or lose my business. And I shall not distribute for free, but when I'm insulted, and when I type my problem and give me the Spanish Inquisition, whenever I talk to someone, as if what I typed was a generic fraud, I'm deeply offended. I have another thing to do with 1h20m of my time on a Saturday than waste it with HP trying to solve their problem of product.

  Fifteen years of my first Compaq Presario several models of HP Pavilion of desktop computers and laptops. Six in total, I bought Windows me to XP to Vista to Windows 8 (and the free update 10).  Guess that's done now because HP has dropped the ball, unless they are equipped through a miracle.

  Well, long story short, the PC was fixed under warranty with a new screen and he was only gone for a week or two. Looks like new. They documented my case several times that fall overseas really left call center the ball bad. They did NOT follow the Protocol. Even if the American side did not guarantee that he would be a guarantee, they handled so much better than what it was initially.

  Basically, if you don't like the answer, and you know what people overseas, manipulation, find a way to talk to an American. They're going to get this done, and if the answer is not a good one, well, you know that it is legitimate at least since he saw rather than phone diagnosed.

• game will not be resolved in full screen.

  am running windows Vista and had an old version of scrabble.   All of a sudden it will not maximize the full screen.   You press on maximizing and there still about 1.5 inches on all sides.   I played with all the properties, screen resolutions, but I can't get it to work.   I bought a new Scrabble updated and it's doing the same thing. All other games seem to be good.    It is much too small for my mother who plays to see.

  Hi, Mc724c,

  Have you checked the manufacturer updates game site?

  Same problem with Rise of Nations.  Check the following troubleshooting services.

  Known graphics issues in Rise of Nations: Rise of Legends

  http://support.Microsoft.com/kb/917715

  Known graphics issues in Rise of Nations

  http://support.Microsoft.com/kb/820089

• Vista will not go past the login screen.

  Recently, I added 2 user accounts for my children.  When I restarted windows would load the login screen, it would go no further.  I click on any of the newspaper in the icons or the icon close / restart and they apear highlighted, but nothing happens.  CTRl ALT DEL does not work either.  I've tired of loading in safe mode and may still not exceed this screen.  I tried restoring the sytem using F11 and select System Restore, and once again, I get to the login screen and will not move any further.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a disc, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.