Tecra M3 - strange observation on performance of RAM (lack of)

Similar Questions

• Windows XP: I have 448 MB of RAM available. What happened to the 64 MB of RAM lack and how can I solve this problem. Thank you

  I am trying to install application constant guard Internet Security of Comcast.  After trying to download and install the product, I get and RAM error message indicating I need 512 MB of RAM to install this product, and I only have 448 MB of RAM available.  What happened to the 64 MB of RAM lack and how can I solve this problem.  Thank you

  The only way to see more of RAM is to install a graphics card and disable the onboard graphics of your motherboard. If you do this, you should be able to see all the 512 MB of it.

  That being said, I will repeat what I said before...
  You can always buy more RAM and install it on your motherboard. Go to crucial.com for more information.

  In addition, you should review install 'Internet Security' application or suite. They are not necessary (you can easily configure Windows so that it is very safe) and they often ruin the performance of a PC.

  If you want advice in "hardening" your PC security, let know us.

• Tecra M2 - strange noise abnormal notebook

  Dear Sir/Madam,

  I received my new Tecra M2 two days ago. As I started using it, I noticed a strange noise coming from the laptop. I'm QUITE sure that's NOT the hard drive or fan, as it seems odd and it's a constant noise. Noise is also quite noisy and annoying, it sounds like a mobile phone signal! Could you tell me what could be the problem and how to solve?

  Thank you very much

  Hello
  I also had a problem with noise if my M2 has been linked to a portreplicator. The solution was the number of Microsoft Hotfix KB822603. I hope this will help you.
  Good bye

• Tecra S2: strange dots on the screen that appears without reason and randomly

  Hello

  I have a laptop Toshiba Tecra S2 for almost a year now.
  I formatted 2 months ago and when I did it. I had strange spots on my screen, appearing without reason and at random. I have not the slightest idea where it came from and I tried to format my computer again.
  I installed the latest driver chipset on the site of intel, and then I installed the latest driver on the toshiba site.

  I noticed that the problem is back. so that solves nothing. What can I do about it?

  PS, not only the points, but I can't play too.

  HI Jelle,

  When you say that you have formatted your laptop, you completely re - install the operating system from the recovery discs? If you did then the display should work fine.

  If you have installed the Microsoft disk operating system, you will need to download the correct drivers from Toshiba for your Tecra from Toshiba download page web site.

  Kind regards

• Tecra 8100 does not work after upgrading RAM

  Hello
  I bought a kingston KTT-SO815/256 pc100 144 pin, did a 2.50.on of my Tecra 8100 BIOS update
  It still does not.
  In my BIOS total ram is ok, so the computer knows that it is in the slot B, but when I try to boot the computer to a blue screen appears necessary a bios update. (Already done) APCI is not good.
  Someone has an idea?
  Now there is in the slot A - 64 MB
  Tried to put 256 MB in the B slot
  them, that nothing worked changed

  Hello

  Well, the blue screen error message usually appears because of the failure of the software matter or material. In case you I guess, apparently because of the new RAM.

  The fact is that you can upgrade the memory to the maximum. 512 MB.
  These modules are compatible:
  PC100 256 MB (PA3051U-1NME)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  I recommend that you check you modules and try to use another compatible.

• Can Tecra A8-143 - I use DDR2-800 RAM?

  I have 143-Tecra A8 with memory 1 GB (2 x 512 DDR2 bus 553) and I want to move to 4 GB (2x2gb DDR2) but only 800 buses available on the market!

  Bus DDR2 800 will work with card mother A8 or it will creat problems?

  enjoy food quick return

  Thank you

  Wael

  Hello!

  Of course, you can use RAM DDR2-800. This is really no problem because the RAM is compatible downgrade. This means that the RAM can run with 800 MHz but at lower speeds too.
  AFAIK the Tecra A8 has a 667 MHz bus speed so the new RAM will work with 667 MHz.

  But don t forget to buy high quality RAM. I always buy Kingston RAM for my Toshiba laptop and they work perfectly. I never had problems with the Kingston RAM.
  [RAM Kingston for Tecra A8-143 | http://www.ec.kingston.com/ecom/configurator_new/modelsinfo.asp?SysID=33219&mfr=Toshiba&model=Tecra + A8 & search_type = & root = us & LinkBack = http % 3A % 2F % 2F www.kingston.com & Sys = 33219-Toshiba-Tecra + A8-143 & distributor = 0 & submit1 = search]

  Good bye

• Tecra M10 - 10F and 8 GB of RAM

  Hello NG,.

  Today, I bought a Toshiba Tecra M10-10th with RAM 2 x 4 GB modules. When I enter the BIOS - it shows 8 GB of RAM. I installed Windows Server 2008 Enterprise 64-bit and after installation of the tab system properties shows 8 GB of RAM, but the Task Manager and all other parameters (for example the pagefile is also only 4 GB in size) said I have only 4 GB of RAM.
  I installed all the drivers and actual patches from the homepage Toshiba - Device Manager displays a device as it is not installed or is unknown.

  What's wrong? Something else has the same experience? Opportunities to work with 8 GB of RAM on Windows Server 2008 64 bit?

  Thanks in advance

  Regards Marc Grote

  Hello

  AFAIK Vista 64bits acknowledged the full RAM after the installation of SP1.
  I put t know how it works on Windows Server 2008, but perhaps you will need also this MS.

  By the way; Maybe the Manager of tasks no indication that the value of RAM that is used and not the total RAM that is inserted

  However try to install a tool like Everest Home edition of analysis of material and check if what RAM value has been reported.

• Tecra 8200: Strange question if I try to install a DVD BURNER

  I have a Tecra 8200, Pentium III 750 mhz, 256 MB Ram, 60 GB hard drive.

  I buyed a new DVD player, especially a double layer RECORDER of DVD TOSHIBA SD-R6472 SLIMLINE 8 x DVD - RW for laptop in the CAR.

  I installed it on my totebook and this drive seems to be not recognized Windows XP (with service Pack 2).

  When I put on my laptop and start the boot Tecra 8200, the led of the DRIVE to continue but when starts to load windows xp this leads coming out and when the sistem of start of windows do not recognize ENGRAVER of DVD;

  Is there a method to recognize-DVD BURNER to windows, and I have to start looking for plug-and-play, after I have remove and replace the DVD burner.
  If I use this way to recognize the work of good DVD and Windows XP and everything works fine.

  The problem is that I do all this action to use this DVD burner.

  I try to install the other two-dvd burner but y at - it the same problem: windows don't recognize they must use my singolar procedure to use they; I try to update my bios to the latest version available and to update firmware of dvd writer but never.

  I ask a real help to those who can provide help for me.

  Thank you all!
  Grazie a tutti! :)

  CIAO

  Italy Dario

  Hello Dario

  Well, first of all, you must check the BIOS settings. As far as I know the configuration of the device must be set to the OS installer.
  Then it s advisable to reinstall the operating system. In this case, you must use the CD recovery or the original version of Microsoft Windows. All the necessary drivers, which you can download from the Toshiba site

  Good bye

• Missing data - Performance: CPU, RAM, disk, Net

  Hi, I would ask how to fix Capacity Planner not displaying no not Performace data on dashboard. Check the data of the "missing" view, Performance for the CPU, Ram Disk and Net are marked 'X '.

  Thanks in advance.

  Please see attached file...

  According to the screen shots data were collected only tree days yet. If I'm mistaken for reports display performance data, a minimum (not sure how many days) of collected performance data. Maybe there is something in the documentation!

  André

• Pole #1 PC Performance and RAM: quantity, average, maximum size of files Adobe

  Do a little research here regarding the performance of the PC and the main memory/RAM.

  If you all could estimate/Riddle the minimum and maximum amount of files Adobe program, as well as file sizes, by each program (Illustrator, Photoshop etc...) I drop the results into a spreadsheet and provided details to etc. (at least attempt, based on number/quantity of participants, if the top I'll provide statistics at the end).

  Also indicate what is the size of the file you usually launched and how many of them. These averages are expected to produce some very interesting/useful information.

  More people who best meet of course (unless this has been done or his stats there somewhere already).

  Since I work mostly in Illustrator, these are the files that I took to target when looking for my storage by specifying the .ai extension. (both bad operating system couldn't do the math).

  I specifically made the research by entering the generic asterisk before the file extension, for example: * .ai, then by specifying all storage locations (Windows, choose 'My Computer' etc., Mac do not know, I have one, just don't use it often so that if anyone would care to specify it).

  For windows, the status bar at the bottom of the window has provided total number of files. To get out of the category, I've just enlarged screen and first counted the number of files poster by scrolling the window. Then moved/positioned column size of file, you click this header to sort etc. from the bottom up, then began to scroll the window with a simple click of mouse (not by the arrows) and counted the pages for the file/category varies so thought to them.

  My results (rounded):

  Illustrator

  Total files: 900 +.

  Min. size: 3KB

  Maximum size: 300, 00KB (or 300 MB)

  Based on the results of research and my some quantities of products and file sizes, I created 5 file size categories:

  1-0-1, 000 KB(1MB)

  2 1, KB(1MB) - 2, KB(2MB) 000 000

  3 2, KB(2MB) - 10, 000 KB(10MB) 000

  4 10, 000 KB(10MB) - 50, 000 KB(50MB)

  5 200, 000 KB +.

  360 files in category 1

  300 cases in Cat. 2

  220 files Cat. 3

  30 files in Cat. 4

  5 files in Cat. 5

  * There are duplicates

  Average of Adobe programs and files of launched/open all day (or work them)

  Illustrator: 2-5 or 10 files a few cat. 3, 1 in category 5 to 300 000 KB

  Absolute maximum load

  Illustrator, launched with 2,300, 00 KB (300 MB) of files, maybe 5 Cat. 3 and 5 Cat. 4, 850 000 Ko charge total (850 MB)

  If someone elsehas another suggestion of structure for the post categories please, seemed to me these adapted my amount of files.

  The information in it would be very helpful/insightful with regard to material resources and system performance is affected. It will also be interesting to see how the Illustrator compares to Photshop (and other programs).

  I'll also post this in the forum of Photoshop.

  [I wonder why copy what hinders a message from one forum to another formatting, adding of additional places at random]

  THX

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  150 views, by a global forum, and they can be repeated without participation except one > interesting

  Perhaps 150 users were curious what kind of question can have been displayed on a stick (pole).

  Find "survey."

  JET

• Tecra M5 strange characters in the BIOS

  Hello
  I have a problem with my Tecra M5 103
  attach images to explain.
  I rewrote the bios many times but nothing changes.
  What is there?
  Can someone help me?

  PS Sorry for my English
  Gianni

  SOLVED

  I did ebb GPU Nvidia with a heat gun for 90 seconds about 500 degrees Celsius - Fahrenheit 932,
  Turn on the heat gun in 10 seconds to make sure the outgoing air reaches the right temperature.
  Place the gun vertically with the nozzle to the GPU pass the gun on the vertical axis,
  positioning continuous and alternating in a foot and an inch of the GPU
  Please get the reflow with google GPU

• Tecra A3 - strange network problem

  Hello
  I have 3 new Tecra A3, all loaded with W2K sp4, all logging to a W2K domain.
  If I try to ping from another pc (or server) on the network, everythings fine.
  BUT if I try to map a drive to a different pc/server (go start - run - \\xxxx\c$), it fails.
  However, if I plug a pcmcia (Greycell 2200) network card I can map a drive with no problems.
  Naturally I loaded the latest drivers on the Toshiba site, but it is always a failure.
  Then... .it seems there is a problem with the built-in LAN card (Marvell Yukon) as it's the same problem on 3 different Tecra A3.
  FYI: we also Tecra A2, M2, M3 & computers Dell desktop, but none of them has the same problem.
  Help!

  There are many problems with these cards not only in the Toshiba machines and Yukon. If you get the latest version of the driver it will solve the problem. Now the driver on the Web site is v 7.29.4.3 but there is a version 8, but is not the list on Tecra A3 but the Tecra M3 and also for XP, however these are he's conditioning set upward, combined, then work XP driver / will include the right parts for W2K. Otherwise all the Yukon view will be latest version.

  Sure this will solve your problem

• How to activate the em64t on Tecra R10-116 to use 6 GB RAM

  Hello!

  I want to use 6 GB of ram on my laptop. In this case, I need activate the em64t functionality. I entered the BIOS configuration, but can not find the place where to allow him. Before I saw him...

  Hope someone will help me

  Hello

  As far as I know, that this option is not available in the BIOS and to be honest, I doubt that the BIOS would deal with the 6 GB.
  But why you want to have 6 GB RAM?

  The 4 GB of RAM is more than enough and I doubt that preinstalled applications exploiting fully the 4 GB of RAM

• Two questions with Tecra S3 (strange sight and FN + F1, F2 functionality)

  TECRA S3 / GeForce Go 6600 / WinXP

  Hello

  When you type in a document, I unintentionally hit a kind of keyboard shortcut (CTRL + FN +?, maybe CHANGE but really can not say it was). The effect was, that the resolution of 1280 x 1024 the position at 1024 x 768... no problem itself, but the Office now seems to be a little bit stretched horizontally and the fonts are very distorted - I almost can't read the text more. I changed the resolution to 1280 x 1024 in WinXP - but the "stretching" a distorted fonts are still there... Does anyone know or can tell me how this can be fixed?

  Another problem - may be in contact with a solution to the duct Chassis view - is that the key shortcut [Fn] + [1] and [Fn] + [2] takes no effect when I try - just nothing happens.

  Thank you very much for your ideas...

  Sebastian

  Hello

  Have you checked the nVidia settings?
  You can check the display properties > Advanced-> GeForce Go tab

  There you should go into the options. I would recommend checking the Zoom option that appears in the slideshow menu on the left side

  By the way; in the properties of display-> themes, you can set the background, icons and other elements to the standard settings of Windows XP. Check it!

• Tecra M2 - strange hard drive connector

  The connector to the HDD on a Tecra M2 I have here, it's not what I expected for an internal 2.5 drive ". I put a picture of him here:

  http://www.CIX.co.UK/~texaspete/hd_connector.jpg

  Anyone know what this connector, or where I can get the converter that allows it to accept 2.5 "normal discs?

  Ta

  Guy

  Hello

  May I ask what did you expect?

  Tecra M2 seems to support the enhanced IDE interface and in my opinion, this is an IDE connector.
  Different notebooks support different interfaces of HDD; IDE or SATA.

  You need an IDE HDD ;)

  Good bye