Tecra M4: System hangs when you run a package of modeling

Similar Questions

• Satellite L350 - 16L system restarts when you run with power cord plugged

  Satellite L350 - 16L
  32 bit windows 7 ultimate sp1

  Power cable is connected, start the start, and just at the point where desktop should appear, the system restarts.
  When the system is running on battery, everything works fine.
  When the system boots to battery, works very well, and if I plug in the power cable, the system hangs
  When the power cable is plugged in, battery charge normally.

  I tried the different power cable, same thing.

  Do you remember when this issue began to appear?
  It would be interesting to know if something special that has happened in the past
  You use the original Toshiba AC adapter that came with this laptop?

  I think that this problem occurs due to the problem of the motherboard and I imagine that there could be some electronic problem power if the AC isn't affected adapter.

  I think it would be the worst case, because it means that your motherboard must be replaced to solve this problem... motherbaord replacement is very expensive and, probably, it is not worth to fix...

  By the way: is it possible to reinstall the system, while the laptop is conencted to the power adapter? What happens if enter you BIOS mode?

• I recently installed PowerDesk Pro v7.0.1.3 and now, the system hangs when you right click to copy a folder, etc.

  Original title: Windows Explorer has stopped working

  My computer is running XP Home Edition Sp3 and using Norton internet security 2011. I recently installed PowerDesk Pro v7.0.1.3and now, the system crashes when you right-click to copy a folder, etc. I read on this forum of a person having a similair problem and being referred to this site offering a patch that seems to not be available:

  http://KB.avanquestusa.com/Al/12/1/article.aspx?Aid=4030&Tab=Search&BT=4&r=

  Marilyn answers Support Engineer Microsoft's answer also suggested maybe using some registry changes, which I'm not comfortable with because of my limited experience.

  Any suggestion would be greatly appreciated pedro147

  None of these suggestions to the Microsoft support technician will help you, but they will consume large amounts of your time.

  Please post a link to this Marilyn Microsoft engineer answer Support responses involving some registry maybe going to I can see that too.

  Older versions of PowerDesk Pro 7.x are known to cause explore crash, so that the sounds on the right.

  The current version of PowerDesk Pro is 8.5.

  You might be able to get the old version to behave by disabling PowerDesk one shell extensions at a time until when you right-click Explorer no longer crashes.  This will leave you with limited functionality of PowerDesk since those afflicted extensions will be disabled, but you should not have these extensions to do anything, you need to make sheets.

  I would start with the PowerDesk ZIP shell extension (I already know about this one).

  It is a version shortened and changed my notes on the use of ShellExView (since you already think sheets):

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.

  For example, you could Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  Right click and disable Microsoft no suspicious extensions one at a time take a list so you can enable them again later if you wish.

  The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know which extension is the culprit, then you can start to enable them one by one until the Explorer fails again.

  Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.  You can then start to reactivate other extensions to zero on the extensions that are causing your accident

  If the cause of the accident is a third party application or program, their may be a later version of the program available that solves the problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• System hangs when you work on Foxprox 2.6 for DOS

  hanging system

  I work in foxprox 2.6 for dos. My foxprox program hangs when system os on snare for one or two seconds how can solve this problem. the system is active and only the program hangs.

  Hi Maury,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited on the MSDN forums. Please ask your question in the following forum.

  Visual FoxPro general forum

• Why did my system hang when I run this block

  When I run this query, why my oracle stop reponding
  and after a while a start-up ifinite output...
  *******************************
  declare
  v_nextval varchar2 (10);
  cursor c6 is
  (select double seq_a.nextval);
  Start
  Open c6;
  loop
  extract the c6 in v_nextval;
  When the output v_nextval < = 10;
  dbms_output.put_line (v_nextval);
  end loop;
  Close c6;
  end;
  /
  *****************************
  
  kinkly take a look on this
  
  Thank you

  Maybe something like that.

  >
  Suppose that in my neck of table A
  last value inserted 258
  I've migrated database from sql server 2005 to oracle 10g
  where currval sequences initailized and last value is not 1

  now I m creating a new sequence, but I do want to mention Startwith 258

  So how do
  >

  SQL> select 'create sequence sequence_' || chr(level + 64)  || ' start with 1 ; ' from dual
    2  connect by level <= 2;
  
  'CREATESEQUENCESEQUENCE_'||CHR(LEVEL+64)||'ST
  ---------------------------------------------
  create sequence sequence_A start with 1 ;
  create sequence sequence_B start with 1 ;
  
  SQL> create sequence sequence_A start with 1 ;
  
  Sequence created.
  
  SQL> create sequence sequence_B start with 1 ;
  
  Sequence created.
  
  SQL> create table table_A
    2  (
    3   sno number
    4  )
    5  /
  
  Table created.
  
  SQL>
  SQL> insert into table_a
    2  select level from dual connect by level <= 10;
  
  10 rows created.
  
  SQL>
  SQL> create table table_b
    2  (
    3   sno number
    4  )
    5  /
  
  Table created.
  
  SQL>
  SQL>
  SQL> insert into table_b
    2  select level from dual connect by level <= 20;
  
  20 rows created.
  
  SQL> with mapping_table
    2  as
    3  (
    4   select 'sequence_a' sequence_name, 'table_a' tname, 'sno' column_name from dual
    5   union all
    6   select 'sequence_b', 'table_b', 'sno' from dual
    7  ),
    8  max_value_table
    9  as
   10  (
   11   SELECT
   12       sequence_name,
   13       to_number(
   14         extractvalue(
   15           xmltype(
   16    DBMS_XMLGEN.getxml('select max(' || column_name || ') c from '||tname))
   17           ,'/ROWSET/ROW/C')) max_value
   18  FROM mapping_table
   19  )
   20  select * from max_value_table;
  
  SEQUENCE_N  MAX_VALUE
  ---------- ----------
  sequence_a         10
  sequence_b         20
  
    1* select * from user_sequences where sequence_name in ('SEQUENCE_A','SEQUENCE_B')
  SQL> /
  
  SEQUENCE_NAME                   MIN_VALUE  MAX_VALUE INCREMENT_BY C O CACHE_SIZE LAST_NUMBER
  ------------------------------ ---------- ---------- ------------ - - ---------- -----------
  SEQUENCE_A                              1 1.0000E+27            1 N N         20           1
  SEQUENCE_B                              1 1.0000E+27            1 N N         20           1
  
  SQL> with mapping_table
    2  as
    3  (
    4   select 'sequence_a' sequence_name, 'table_a' tname, 'sno' column_name from dual
    5   union all
    6   select 'sequence_b', 'table_b', 'sno' from dual
    7  ),
    8  max_value_table
    9  as
   10  (
   11   SELECT
   12       sequence_name,
   13       to_number(
   14         extractvalue(
   15           xmltype(
   16    DBMS_XMLGEN.getxml('select max(' || column_name || ') c from '||tname))
   17           ,'/ROWSET/ROW/C')) max_value
   18  FROM mapping_table
   19  ) ,
   20  sequence_collation
   21  as
   22  (
   23   select us.sequence_name, us.increment_by, mvt.max_value from user_sequences us, max_value_Table mvt
   24   where
   25       us.sequence_name = upper(mvt.sequence_name)
   26  ),
   27  sequence_exec_order
   28  as
   29  (
   30  select 1 execution_sequence, 'alter sequence ' || sequence_name || ' increment by ' || max_value || ';' text from sequence_collation
   31  union all
   32  select 2, 'select ' || sequence_name || '.nextval from dual ; ' from sequence_collation
   33  union all
   34  select 3, 'alter sequence ' || sequence_name || ' increment by ' || increment_by || ' ;' from sequence_collation
   35  )
   36  select text from sequence_exec_order order by execution_sequence
   37  /
  
  TEXT
  -----------------------------------------------------------------------------------------------------
  alter sequence SEQUENCE_A increment by 10;
  alter sequence SEQUENCE_B increment by 20;
  select SEQUENCE_A.nextval from dual ;
  select SEQUENCE_B.nextval from dual ;
  alter sequence SEQUENCE_A increment by 1 ;
  alter sequence SEQUENCE_B increment by 1 ;
  
  6 rows selected.
  
  SQL> alter sequence SEQUENCE_A increment by 10;
  
  Sequence altered.
  
  SQL> alter sequence SEQUENCE_B increment by 20;
  
  Sequence altered.
  
  SQL> select SEQUENCE_A.nextval from dual ;
  
     NEXTVAL
  ----------
          10
  
  SQL> select SEQUENCE_B.nextval from dual ;
  
     NEXTVAL
  ----------
          20
  
  SQL> alter sequence SEQUENCE_A increment by 1 ;
  
  Sequence altered.
  
  SQL> alter sequence SEQUENCE_B increment by 1 ;
  
  Sequence altered.
  
  SQL> select * from user_sequences where sequence_name in ('SEQUENCE_A','SEQUENCE_B')
    2  /
  
  SEQUENCE_NAME                   MIN_VALUE  MAX_VALUE INCREMENT_BY C O CACHE_SIZE LAST_NUMBER
  ------------------------------ ---------- ---------- ------------ - - ---------- -----------
  SEQUENCE_A                              1 1.0000E+27            1 N N         20          11
  SEQUENCE_B                              1 1.0000E+27            1 N N         20          21
  

  Concerning

  REDA

  P.S: query of dbms_xmlgen old posts in this forum...

• Original title: System hangs when you open Add/Remove programs

  Original title: System hangs

  Windows XP crashes each time I have open the control panel and try to view add or remove programs (it also crashes in safe mode). He locks also after has been idle for a few minutes. I tried selective startup mode and the shutdowns continue to be committed. All the screensavers and standby/hibernation modes are turned off. I ran the diagnostics and only met with a 2000-0146 error code. Any other ideas out there?

  I was finally able to save all my data and was able to reformat my existing hard drive. I also reinstalled XP SP3. I finally got all the drivers reloaded and have reinstalled virus protection. So far, everything seems to be back to the standard...

• System hangs when you work in Office 2007

  Twice now, my computer has weighed when using (1) with EXCEL 2007 and (2) a former OUTLOOK 2003 message.  It also displays a white screen with different colors of blue lines and rectangles - almost as if it was an EXCEL spreadsheet without letters or numbers.  I can not access any control, e. g. the Task Manager.  And it doesn't turn off if I turn off the power supply.  When I reboot, things seem to load OK.  Does anyone have an idea of what is happening and how to fix it?  I use VISTA Home Premium SP2.

  Hi SandyJC,

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem.
  
  1. click on Start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the Load Startup items check box.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  5. click on OK.
  6. When you are prompted, click restart.
  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click restart.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• system hangs when you sit online game

  my computer crash after going on the site of games pogo tigerwoods online ect.it visit it tell me to download the Shockwave already play.that install. It will not start back upward for at least 10 minutes when crash or IE7 stop answer on game tigerwoods EA.com .i have ran spyware malware progam used fix it .cochez all my settings still no fix.

  Moved from feedback Forum to repair the Windows and system recovery Forum.

  Hello

  1. What version of Windows are you using?
  2. Faced with this problem while playing games online?
  3. You get an error message when the computer goes down?
  4. Are you having the same problem if you are browsing Web sites?

  I suggest you send more information to help you better.

• system hangs when you play

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  System name JOE-BC16DDBAE7F
  System manufacturer system manufacturer
  System product name model system
  System Type X 86-based PC
  Processor x 86 family 15 model 35 Stepping 2 AuthenticAMD ~ 2211 Mhz
  Revision of the BIOS ACPI BIOS Version/Date Phoenix Technologies, LTD ASUS A8N - SLI Premium 1303, 10/08/2006
  SMBIOS Version 2.3
  Windows K:\WINDOWS directory
  K:\Windows\System32 system directory
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  JOE-BC16DDBAE7F\Joe user name
  Eastern Daylight Time zone
  Total physical memory 096,00 MB 4
  1.91 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 4.59 GB
  File K:\pagefile.sys

  Hello

  1. What games you are trying to play online games or games that are installed on your computer?

  2. were you able to play these games earlier?

  3. what changes has been made recently to your computer?

  I suggest you perform a clean boot to verify if a third party application or service that runs in the background is the origin of the problem

  How to configure Windows XP to start in a "clean boot" State http://support.microsoft.com/kb/310353

• "System.UnauthorizedAccessException" when you run Optika Vision Lite

  I installed optika vision lite software on my computer windows 7 and when I clicked on options to change the language from Spanish to English, he brought this error, please help me I need to use the software as soon as possible

  Thank you

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.UnauthorizedAccessException: Access to the path "C:\Program Files\Optika\Optika Vision Lite 2.0\temporaryini.ini" is denied.
  at Microsoft.VisualBasic.FileSystem.FileOpen (Int32 FileNumber, String FileName, OpenMode Mode, OpenAccess, OpenShare, Int32 RecordLength share access)
  at Optika_Vision_Lite.IniFileHandling.WriteProfileString (String FName, String s, String key, String replacement)
  at Optika_Vision_Lite.LanguageDialog.OK_Button_Click (Object sender, EventArgs e)
  at System.Windows.Forms.Control.OnClick (EventArgs e)
  at System.Windows.Forms.Button.OnClick (EventArgs e)
  at System.Windows.Forms.Button.OnMouseUp (MouseEventArgs mevent)
  at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.ButtonBase.WndProc (Message & m)
  at System.Windows.Forms.Button.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5477 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
  ----------------------------------------
  Optika Vision Lite
  Assembly version: 2.0.0.0
  Win32 version: 2.0.0.0
  Code: file:///C:/Program%20Files/Optika/Optika%20Vision%20Lite%202.0/Optika%20Vision%20Lite.exe
  ----------------------------------------
  Microsoft.VisualBasic
  Assembly version: 8.0.0.0
  Win32 Version: 8.0.50727.5420 (Win7SP1.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5468 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System.Runtime.Remoting
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5483 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
  ----------------------------------------
  Interop.LMDSKernelLib2
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Program%20Files/Optika/Optika%20Vision%20Lite%202.0/Interop.LMDSKernelLib2.DLL
  ----------------------------------------
  AxInterop.LTMMLib
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Program%20Files/Optika/Optika%20Vision%20Lite%202.0/AxInterop.LTMMLib.DLL
  ----------------------------------------
  Interop.LTMMLib
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Program%20Files/Optika/Optika%20Vision%20Lite%202.0/Interop.LTMMLib.DLL
  ----------------------------------------
  Accessibility
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
  Code: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Original title: Hello, I need urgent help on this

  Moved from the community involvement Center

  Hello

  Since Optika Vision Lite is a third-party software

  http://optika-vision-Lite.software.informer.com/

  You're more likely to find useful information to

  http://answers.informer.com/search?q=Otika+vision+Lite

  or the forums

  http://software.informer.com/Forum/

  Don

• System crash when you run Mcafee

  McAfee Scan freezes at C:\Program Files\...\Mpeg_Engine\ASH264Enc.dll

  Screen of the blackout, blue, general drama. Computer says 'one of your disks should be checked for consistency. Dell said they find no hardware problem in their analysis. McAfee said that there is a windows problem.

  Help!

  Hi, I had a similar problem with MBAM and someone recommended to mehttp://www.resplendence.com/whocrashed

  He informed me that he wqs indeed one out of the pilot, I dated and had no problems since.

  Just re-run your Mcafee scan and after it blue screens, start up run this tool and it will let you know what little devil is causing your aggravation. Hope you find it useful to thius.

  Driver can be a fickle bunch.

  Select this option.

  Windows Vista (the best), home premium.

• Tecra S2 began to turn off the power when you run some heavy applications

  I have laptop Tecra S2 and (almost 3 years) had no problem so far.

  Recently, it started to turn off instantly when you run some heavy duty applications, such as games. He takes turns instantly and can work hours if it's just a spreadsheet or just Web broswing documents but when I start a game it takes 15-20 minutes.

  Once I started it even once, it takes less time to get the same result.

  My guess is overheating - any ideas how to fix?
  Or it may be something different?

  See you soon

  Hello

  There is nothing to fix. The laptop needs to be cleaned. It must be done on the professional track. This means that the laptop must be disassembled as just at the moment when the cover is removed the cooling fan and the cooling rack can be cleaned properly.

  After having this laptop will work like new.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

  When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

  Original title: microsoft security essentails

  Hi Kim,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.

  1. when exactly you receive this error message?

  2. are you on a computer in the domain?

  3 is the Microsoft Security Essentials-specific issue?

  The error messages say about group policy which is the collection of settings that define the appearance of a system and how it behaves for a defined group of users. Microsoft provides a program with a console (Group Policy Microsoft Management Console). The console allows programmers select a GPO that is linked to the directory of centers for domains, organizational units or sites. GPO provides the programmer with security options, the software installation and maintenance options, scripting options and the folder redirection options.

  Response with more information to help you.

• When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  I am running Windows 7 Professional.  I have a piece of equipment that has only Windows XP drivers, I desperately need to work.  I read up on top of the virtual systems and XP mode.

  When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  Thank you

  Andrew

  You must attach the USB device to Virtual PC XP Mode: http://support.microsoft.com/kb/824369