Tecra M5 - new installation of XP SP3 - no sound

Similar Questions

• TOSHIBA Libretto SD Card - gel after the installation of the SP3/Windows Update

  Hello

  Since the installation of SP3 via Windows Update on a new installation (Original Toshiba Recovery CD) my card reader SD freezes Windows after putting the card in the slot.

  The card is OK and formatted.

  Besides updating windows doesn´t work more.
  I´ll to pass the message on the updates, and the installation stops.

  The patch couldn t be installed because there is a problem with the computer.

  I m of the Austria and I translate to English.
  Hope you can read and understand it - perhaps someone has a solution.

  Best regards

  Ingo

  Published by: ADMIN

  Hello Ingo

  Last days, we read more similar reports on the various problems after installing SP3. As far as I know that Toshiba has faced similar problems after SP2 release and updates were offered. The fact is that SP3 has a negative influence on the different drivers and Toshiba has designed tools and utilities.

  For now, Toshiba has not any update and we need to see what will happen in the future. I always use SP2 and do not have similar problems on my laptop satellite.

  Or you can live with it and wait for update or restore BONES on time earlier and remove SP3.
  I see no solution at the moment.

• upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  my PC configuration is like below:

  Card mother Intel DH61WW
  Processor Core I3 2100 3.1 Ghz
  4 GB OF DDR3 RAM
  Seagate 1 TB SATA HARD drive
  OS: Microsoft Windows XP Professional SP3

  I run Windows 7 upgrade advisor in which some results below the incompatibilities:

  Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
  Unknown Intel we have not the compatibility information about this device.
  Intel 82579V Gigabit Network Connection
  Unknown Intel we have not the compatibility information about this device.
  Realtek High Definition Audio
  Realtek unknown we have not the compatibility information about this device.

  Here's my conceerns:

  What needs to be done to overcome the problems of incompatibility?
  Do I need to download new software files compatible for windows 7 and then install
  for example VLC media player, Skype, MySQL Server I am running
  or currently existing files are compatible to install with Windows 7?

  Would I be able to upgrade to windows 7 without any problem and safely?

  Could you please help me with the questions above?

  Please correct me with additional suggetions that I may have missed with.

  Looking forward to hear from you

  Thank you

  You understand that you will not be able to upgrade Windows XP to Windows 7?  He will have to do a clean install.

  The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)

  John

• Installation of XP/SP3 / requests sfc/scannow command

  I have a genuine copy of XP SP3 installed on my computer (performed by a computer technician), but previously, I don't have an XP installation CD and I didn't know the details of the product key.

  I managed to get the 25 product key - Belarc figure both Magical Jelly Bean (!) Detectors of key Windows gave me exactly the same code.

  I also managed to get a XP SP2 installation CD authentic with COA + keys used - haven't seen any ones SP3 and Microsoft is no longer distribute a XP software. It says distribution only with a new PC - is this correct?

  Will be a computer technician can reinstall XP SP3 using the this and updated - SP3 will still be available for download now that support has ended for XP?

  In addition, you kindly confirm that this CD that will allow me to make the sfc/scannow command. ; When I tried to asked me repeatedly for the XP installation CD.

  This CD SP2 / SP3 computer difference leaves me unsure.

  A modern operating system would be better I know, but I'm not able to get a new computer at the moment.

  Your CD of XP sp2 is an "OEM" version rather than a retail version, but if you have the correct key, it works perfectly.  The problem with OEM installations, is that they are linked to the computer on which they were first installed... then once installed, it cannot be installed on another computer (and replace the motherboard is considered as "another computer").

  Service Pack 3 is available for download and will continue to be available in the foreseeable future.  If you have a new installation using the SP2 CD, download you the sp3 and install it manually (you must have sp3 before Windows Update will strive to give you the post-sp3 updates).

  That said, it is easy to create an installation cd of sp3 by a process called "slipstreaming".  You can do it yourself, but any competent computer technology needs to know how to do it.  See http://www.bleepingcomputer.com/tutorials/slipstreaming-windows-xp-to-create-bootable-cd/

  You can even create an installation CD which includes sp3 as well as all the critical updates that came after sp3.  See http://xdot.tk/

  There are a few caveats to keep in mind before installing sp3:

  Before installing sp3, read this article--> http://support.microsoft.com/kb/950717

  If your PC is a HP Pavilion and Presario Media Center and has an AMD processor, this hotfix must be installed before installing sp3-->

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&DLC=en&softwareitem=PV-60484-2

  Install SP3 for download--> http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=24

  ignore the text which says that it is for network installations and also ignore the text informing Windows/Microsoft Update If a single update of a PC.

  Regarding the use of sfc/scannow command which will require an installation CD is the same service pack that is installed on the computer, BUT using sfc/scannow almost certainly NOT help you in any difficulty that you are likely to encounter.  Despite the many Web sites that you can see who is advised to use this command, simply is not what people think than that, at least for XP.

• New installation of Windows XP Pro! I can't update.

  I reformatted and installed XP Pro on a new construction. My drive is quite old. There the SP2 and Internet Explorer 6. When I try to update, I get error 0 x 80240036. I can't even install the Nvidia graphics driver because she needs .net framework. Its been two days of * trying to solve this problem. Any ideas on what I should do? Remember that it is a new installation.

  Read the steps to take before you install Windows XP Service Pack 3 (especially the # 4: turn off you're a / v)

  If you have an AMD processor, see http://www.microsoft.com/en-us/download/details.aspx?id=23751

  Download and install SP3--> http://www.microsoft.com/en-us/download/details.aspx?id=24

  Download and install IE 8--> http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx

  Return to Windows Update

• new installation of win XP does not updated

  Hello

  I have 2 units of office with a new installation of windows XP Pro top, but when I try to run updates it comes up with code 0x8024D001 error and says "the site has encountered a problem and cannot display the page you are trying to view.

  I have not installed any other software apart from the SP3 and IE8.

  Someone at - it ideas why 2 different units may be the cause of this problem?

  Hello

  I have 2 units of office with a new installation of windows XP Pro top, but when I try to run updates it comes up with code 0x8024D001 error and says "the site has encountered a problem and cannot display the page you are trying to view.

  I have not installed any other software apart from the SP3 and IE8.

  Someone at - it ideas why 2 different units may be the cause of this problem?

  Hi Paul,.

  You must first install Service Pack 3.

  After you have installed, you can run the Fixit on this site:
  http://support.Microsoft.com/kb/2497281/en-GB

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• New installation of Windows XP does not - UNMOUNTABLE_BOOT_VOLUME

  I'm trying to do a fresh install of Windows XP.

  Soyo SY - P41 845PE Lite MB
  Pentium 4, 2.4 GHz
  1.5 GB of Ram

  This is a computer that I use every day and who usually has a hard drive with WindowsXP SP3. I just want to have a spare hard drive with a new installation of Windows XP on it.

  But installation can not. Usually to auto restart after step 'Copy files' of the installation process. The Windows splash screen appears briefly, and then blue screen message, "a problem has been detected and Windows has shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME"followed a few Advisory paragraph which does not apply because the operating system is not yet loaded, then:" technical information: * STOP: (0x8951c900) 0xc0000185 0x00000000 0x00000000. "

  Once he got as far as the Windows Installer screen (one who tells me it will take 39 minutes down left) then a box seemed to read: "Fatal Error. An error was encountered which prevents the installation to continue. Installation failed to install the product catalogs. This is a fatal error. The Setup logs files should contain more information. "Read the Setup log file:" error: the signature for the installation of Windows XP Professional is not valid. " The error code is 80096001. An error occurred during trust verification. »

  Another time, after you press enter in the "WindowsXP installation on the selected element", I INSTANTLY got a screen which read; «An error has occurred during installation has been updated of the partition information on 152626 MB disk 0 at Id 0 on bus 0 on atapi [MBR].» Setup cannot continue. »

  Things, that I already tried that did not work:

  Using two different Windows XP Professional installation disks.

  Withdrawal and tries to install with different RAM sticks in place.

  Two IDE 40 son different cables, which work fine on this computer.

  Two different Western Digital disks hard two test without error using the WD diagnostic utility.

  My knowledge is limited, but that seems to leave only a bad card mother, right?  However, as I say, the computer works well with this old install Windows XP on it. He simply refuses to let me do a new installation on another hard drive.

  What other steps can I take to get a new installation on a hard drive with this computer?

  Thanks to each of you for your attention to my problem.

  I spent $4 on a 80 wire cable IDE (to replace the 40-wire cable I used) and I was finally able to get Windows XP installed today.

  Because I had done installations in the past with the 40 wire cable, I don't understand why it didn't work anymore. I guess the age of the cable, but I actually had multiple failures with a whole new thread 40 I had just bought. A mystery, but at least I now have a new facility and I am inclined to believe the 80 wire will make for a faster computer.

• Installation of the SP3 for XP now crush the latest system updates or interfere with programs like IE 8?

  In all other ways my XP system is up-to-date, with the exception of SP3. I never needed before. SP1 and SP2 have been installed at the time when they were new. Now SP3 is required to upgrade to some new programs. Installation of the SP3 at this late date crush the latest system updates or interfere with programs like IE 8? I don't want that my system is back to older parameters which are now outdated. If the system settings are changed, how do I know those who?

  No, this does not disturb.

• cancel a new installation cd

  By mistake, I installed a CD, a new installation of xp (sp1).  I want to see if there is any way to cancel and return to my previous settings which had sp3 and all updates.  My system still sees some information from the prior settings but now says I have sp1, an older version of IE, etc..  The restoration of the system, this would allow only for the restoration from when the cd has been installed (yesterday).  I have now two accounts user showing when I boot.  According to me, one is the installation of the cd yesterday and one of my original settings.  Or am I now look at doing a whole new xp install on a clean hard disk?

  You need to ask in the Windows XP forum. It does not go through the Internet Explorer browser.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp

• 123 updates is normal after a new installation.

  I recently bought a desktop computer with a new installation of windows xp with sp3 custom. When I tried to install updates, I was getting a 403 error. I have used ie fixit to sweep the update section and he finds the problem and he healed for me. But when I was able to download and install updates there was 123 which has shown all at once. They have installed ok and the computer seems to work very well, but I would like to know if it was normal that 123 updated if poster altogether even after a complete re install. Thank you.

  Hello

  See this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/403-forbidden-access-is-deniedyou-do-not-have/4732a91a-1594-4516-90c8-bff4051c2eb8

• installation of XP/SP3

  I recently bought Fusion 2.0.3 (Yes, having recently) and I am trying to install a new instance of XP/SP3. So I downloaded the ISO image and tried to install it. I use Mac OS X 10.5.6 on a MacBook (Core 2 Duo).

  Long story short, I can't get Fusion to install from an ISO image or a physical CD. Whenever he tries a PXE network boot. If I use ESC to go through the Start Menu, it seems that the "Removable devices" and "Drives" are enabled with + signs but 'CD-ROM Drive' and "AMD 79C970A network boot" are disabled. And I can't activate the CD player through the start of the Phoenix BIOS Setup utility menu.

  In addition, the Setup Wizard will not allow insert me the installation CD in the beginning because the "Continue" button is never enabled. I have to choose 'Continue without disk' and select an installation disk or an ISO on the next screen.

  Vmware, that all kernel extensions seem to be present and represent:

  kextstat | grep vmware

  108 x 0 35674000 0 0xd3000 0xd2000 com.vmware.kext.vmx86 (2.0.3) & lt; 12 6 5 4 2 & gt;

  109 0x3479c000 0 0xb000 0xa000 com.vmware.kext.vmci (2.0.3) & lt; 6 5 4 2 & gt;

  110 0x346ef000 0 0 x 6000 0 x 5000 com.vmware.kext.vmioplug (2.0.3) & lt; 37 21 6 5 4 & gt;

  111 0x349a9000 0 0 x 9000 0 x 8000 com.vmware.kext.vmnet (2.0.3) & lt; 12 6 5 4 2 & gt;

  And I tried it with Fusion 2.0.2 with the same results.

  Thanks for any help.

  -Dan

  I am trying to install a new instance of XP/SP3. So I downloaded the ISO image and tried to install it.

  I think the link is towards SP3, which is an Update to XP and not a standalone version. Although it is possible to slipstream service pack in the Windows CD and get bootable media to date, I don't think that the link is (among other things, Microsoft probably would not give Windows licenses).

• Email records retrieved from a drive Thunderbird crashed. You want to import into my new installation.

  Tried to copy/paste the files recovered in profiles/Mail/Local folders in my new installation, but without success. I can't find an option to import messages from a folder. Any ideas? Thank you!

  Re: tried to copy/paste the files recovered

  Are you sure you are copy/paste the correct data?
  Emails are stored in files mbox, no records.
  MBOX files don't have any extension.

  As an example, in the image below, it states:

  • Inbox (mbox file containing the e-mail)
  • Inbox.MSF (indexing file - no emails)
  • Inbox.SBD (if created subfolders of Inbox. This folder contains more than mbox and indexing of files)

  Note:
  Thunderbird should be closed when copy paste or do anything in profile files.

  There is also an add-on which is pretty good.
  Download downloads folder or desktop.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  Install:
  Tools > Addons or Menu icon > Addons
  Click the gear icon and select "install the addon from file".
  Locate the downloaded xpi file and click Open
  You may have to restart Thunderbird.

  Right click on "local folders".
  Select "Importexporttool" > "import a mbox file".
  Select: "import directly one or more mbox files" and click OK
  Find the mbox files, and then click Open.

• Link new installation of thunderbird with the old profile.

  I created a new profile and stored on an external drive, there is a certain messages, I just had to reinstall win7 and do not know how to link a new installation of thunderbird with my old profile. Seems fair to get a host of issues that do nothing.

  Look at https://support.mozilla.org/en-US/kb/profiles-tb#w_how-to-find-your-profile and then go to the directory corresponding to your external drive to find your old * *.default file.
  Copy your old profile to the directory where your current profile is stored.
  See https://support.mozilla.org/en-US/kb/using-multiple-profiles to switch to your old GOLD "profiles.ini" edit profile to change the 'path' in the name of your old profile.
  Restart Thunderbird.

• Firefox opens, then is unresponsive. Cannot reset. New installation doesn't fix it. Mac OS x

  I was browsing the internet with Firefox when it froze, so I force quit. I open it, but immediately, it freezes / does the thing of mouse wheel that turns indefinitely, so I have to force quit it again.

  I tried restarting and closing of my Mac. Then, I tried to reset Firefox, but it does not. I tried Safe Mode, but it's always immediately the cursor of the spinning wheel. So I tried to do a fresh reinstall several times. But it still keeps having the same problem.

  Help!

  Ed. I don't think it could be a problem with my Add ons, because I used the same for years and never had this problem.

  One thing I've changed a few days ago is usually I leave my Firefox history store things for centuries, but I thought I'd release RAM by changing these settings. I can't remember which, however, I changed the settings may have changed something then it deletes history and and something else after the closure of each session.

  It seems that I found a solution to my problem!

  I went in "name of user/Library/Application Support /...» "and deleted the folder of Firefox with the settings of the profile, as it seemed to be the settings I changed what triggered the problem beforehand.

  I then with the sacking of the application and downloads of .dmg and remake a new installation. Firefox is now open and work normally for me. (However, I do not know why change my history in the first place settings, causing the problem.)

  Please NOTE: If someone else tries this, if you delete the folder, you will lose all your saved bookmarks. There is probably a folder in profiles that you can copy and save to preserve your bookmarks, but I don't know who it is.