TECRA M9 - drivers Vista x64bit

Similar Questions

• Tecra A8 PTA83A - Vista 32 bit drivers needed

  Hello

  I'll try to find the drivers (Vista 32 bit) for this computer laptop pta83a - 04g 012.

  However, I can not even find the laptop on the Australian site. In fact I can't find anywhere what "A8" laptops at all.

  http://www.MyToshiba.com.au/support/download

  Can someone help me please.

  I also checked some other sites Toshiba from different countries without result.

  I wish there was an option to check through all countries, at the same time.

  Kind regards
  Paul

  Hmm... I'm not sure why this Tecra series is not listed on the page of the Australian driver Toshiba but same model Tecra A8E PTA83 is released in Europe also.

  

  You can download and use the drivers for your laptop that appear on the page of the European driver Toshiba
  http://www.Toshiba.EU/innovation/Dow...jsp?service=EU

  The drivers are fully compatible

• Tecra M9: After Vista standy, screen resolution changes automatically

  Hello

  I use a Tecra M9 with Vista SP 1. The current display to the nVidia Quadro VNS 130 M graphics card driver is 7.15.11.126
  My native resolution is 1440 x 900, 32-bit color. (the resolution of the screen)
  Sometimes, when the computer comes out of standby, the resolution changes after the sequence to connect to 1280 x 800 and stays that way. I have to manually change back to 1440 x 900. This isn't always happens, but say all of 1 times 2 the computer wakes from sleep.

  What is a (faulty) driver problem?

  Kind regards

  charlieMOGUL

  > Is it a (faulty) driver problem?
  Perhaps this problem could be related to the graphics driver.
  Have you tried to update?

  See European Toshiba driver and update the graphics driver.

• Tecra M1 drivers wireless

  I had to reload my o/s on my Tecra M1 caused by a virus. My wireless drivers are missing, where can I download it from? I tried the download page on here, but no luck.
  Thanks for any help. Steve

  Hi Steve

  On http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp you can find all the necessary drivers for your device. I found four wireless for your Tecra M1 drivers.

• Drivers Vista for Qosmio G10-100

  Have acquired a portable G10-100 which is under Vista Premium, and commissioning a new hardware found box appears for the mass storage controller. However, I was unable to find the driver for it. I contacted Toshiba who informed me that they don't support probems Vista on older machines! and an online search does not yield no results. Built in multi card reader is a Texas Instruments PC17x21 dedicated Sockets SD/MMC/MS/MSPRO/SM/XD.

  Any help would be greatly appreciated.

  Concerning

  Nesbitt1

  Hello

  Toshiba Qosmio G10 was delivered only with OS Win XP and not Vista.
  According to the official document of Toshiba drivers Vista for G10 series don t exist and which will not.
  I think that you should check the Web site of the (device) chip manufacturing to a compatible driver or test driver Vista released for an another series i.e Qosmio G30

  Good luck

• Qosmio F20-111: need drivers Vista-> Can I use drivers for F30?

  I couldn't find a driver for my laptop vista. Can I use F30 drivers for my laptop F20?

  Thank you

  Hello

  Of course, you can try to install the drivers of Qosmio F30 but the question is: drivers Vista F30 will work?
  I think you should be able to install Vista on your F20.
  But you will not be able to use the additional features of Toshiba Toshiba controls, keys FN, etc.

  PS: I found very beautiful thread in the Qosmio G20 section.
  Some of the guys discussed about Vista on the G20. Now for the G20 Vista drivers are not available, but FranciscoJr has handled this problem.

• I have an ASUS P5KPL-VM support cd and it says "drivers vista inside", but there is no serial key and how I put in place?

  I looked in the box, he had no serial number, but it has a sticker and said the SN: n ° 81MOAD204352 and part: 90_MBB790_GOAAYOKZ if you are a Microsoft support worker please help me.

  Why is it a "serial key" for pilots?

  Or do you think that means something when it's not?

  "Drivers Vista inside" simply means that the drivers that enable Windows Vista (operating system) to communicate correctly with the ASUS P5KPL-VM motherboard are on CD for (install you to use in Windows Vista once you have Windows Vista installed.)  What he NOT average, and I think if you think that means, is that you can install Windows Vista with this CD.

  If you try to install Windows Vista - you need an installation of Windows Vista DVD and product key.  It is unlikely that one would come with your motherboard - although some company might have implemented their own together I guess (although just a motherboard and operating system - that would be weird).

• Update Windows (KB2820197) (KB2829530) cumulative security update of the stop bits vista x64bit assets?

  May 21, 2013

  I tried several day of now to install updates for windows (KB2820197) and (KB2829530). Here is the 'important' for most of the OS?  Need help with "active x killbits for windows vista x 64 bit systems based Cumulative security update". and "Internet Explorer 9. Server 2008 SP2.

  cumulative security update x 64-bit based system". I have put a lot of effort in this situation and need to know who has an answer.

  email = * address email is removed from the privacy *

  June 8, 2013

  With the effort on the problem of update, I put my situation is resolved! / I will provide the step by steps and links to follow.

  Step-(1)    To solve the (KB2820197) and updated cumulative (KB2829530) activates the stop bits X do the folllowing.  Microsoft Download Center and run the "System Update Readiness Tool. This tool is for Windows Vista x64bit systems (KB947821). May 2013.

  http://Windows.Microsoft.com/en-US/Windows7/ Vista /What-is-the-System-Update-Readiness-Tool? It is a standalone Hotfix for Windows Updates and allows for updates to install correctly. Step 2. SFC Scan http://support.Microsoft.com/kb/929833 first cl'k. Start, accessories and then click command prompt. (You must run this tool with administrator rights). When 'Back in black' window opens, you want to get the cursor flashing / then type in "sfc/scannow" and press ENTER. Microsoft located on-site or corrupt files and replace/move with the right Microsoft files. (Vista and windows - 7). Step 3 uninstall 3rd party security program. Please read the full discussion here: http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/list-of-anti-malware-product-removal-tools/407bf6da-C05D-4546-8788-0aa4c25a1f91 4 step manually download and install mode ' Safe "(enregistrement, arrêt, fermer tout ce que vous souhaitez conserver)."» http://support.Microsoft.com/kb/973135 Clean boot: http://support.Microsoft.com/kb/331796 Step 5. rename Software Distribution and Catroot2 See under method manual here (method 2 and 10): http://support.Microsoft.com/kb/822798 Step 6. Install the update in built-in Administrator http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-enable-the-built-in-Administrator-account/67922948-62b9-4AC0-ba1f-12e9454d231b?auth=1 If you are not able to go online or met a problem with Internet Explorer: http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings-in-Internet-Explorer-9 You can use this link to make your computer faster: http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=9B9RKrhSEv0 You can download this Microsoft Security Scanner to search for infections: http://www.Microsoft.com/security/scanner/en-us/default.aspx Direct them; Ronald a. Curns, Maine

• Tecra S2-> drivers and utilities for Vista?

  Hello

  Does anyone know if Toshiba intends to release drivers for the Tecra S2, is not so old and my model has more then enough grunt to run Vista, my only hesitation in the upgrade is not knowing if utilities such as power manager will work, or if they will all be upgraded.

  Thank you!

  The update/version of the Vista driver is a theme of Top10 here in the forum.
  (check the other categories ;))

  I think Toshiba will first publish drivers for mobile phones capable of Vista with vista tab.
  I m not sure about books another but I think Toshiba will release some drivers for laptops that are able to run Vista

  Let's be patient.

• Need x 64 Vista for Tecra A9 drivers

  I would like to install Windows Vista x 64, but there is a problem on Toshiba page is not compatible with vista x 64 drivers. I have a Tecra A9 laptop.
  Anyone know what other Toshiba laptop I could take the drivers?

  > Anyone know what other Toshiba laptop I could take the drivers?

  Hmm. You should check the single computer series laptop and you should try the drivers only. Maybe some drivers will work on your Tecra because many laptops are equipped with the same features.

  I don t see otherwise as to check the drivers only.
  Also check your chipset that is installed in your laptop and then some drivers for this chip on chip manufacture website.
  For example; If your wireless network card is Intel then you can see the Intel page for the correct driver.

  Good luck

• Tecra M7: What is the correct order to install drivers Vista

  Hello

  after Vista fleeing RTM on my Tecra M7 Tablet and using a mixture of XP and Vista drivers, I decided to rebuild my machine.
  However is - that someone could advise on the order in which the Vista drivers must be applied when Vista is back on?

  Kind regards

  Rhys

  Hello

  As you can see the document of instructions for installations is unfortunately not available but you can try to install it on this way:

  OPERATING SYSTEM
  Display driver
  Audio driver
  Driver modem
  touchpad driver
  Flash media driver
  Value Added Package
  Tablet PC Extension Package
  Support Button
  Config Free
  And so on...

  I hope you will successfully install OS.

• Buttons do not work on Tecra M7 after Vista Upgrade

  I know that this has been addressed several times to apologize and need to wear it again as my two function keys on my Tecra do not work Vista Ultimate Upgrade post.

  If I press one of them is right now they launch Windows Mobility Center. I know that's not what must happen. They haven't worked briefly last year after that my machine is back to Toshiba repair. They performed a kind of utility that has restored the functions (I had to fall back XP Tablet as one I had a problem of CD ROM believed was bound Vista and turned out be hardware failure), alas, I haven't been back to Vista and they don't work.

  I have installed all updates for Vista in the order they appear on the web site. I have since saw the order suggested to load the Vista drivers. A suggestion to Toshiba - it would REALLY help if you produced a leveling guide updated for Vista with a step by step guide describing the order in which the updates must be performed.

  Anyone out there that can help you - I would be really grateful for your comments.

  I managed to solve this problem by changing the Toshiba value added package items. I had to check a box for support button that had not been added. If anyone else knows this cumulative, I hope this helps.

• How downgrade Tecra S10 to Vista?

  My friend asked me to fix his laptop. There Tecra S10-11 has. He had installed Vista, but it was installed Win7.
  Now, he wants to come back that Vista, but it does not create the recovery disk. I checked the laptop and there 1.46 GB recovery partition.

  It seems too small. How can I reinstall Vista and remove the installation of Windows 7?

  I don't know what your friend did exactly and how he had installed Win7, but you can try to start the operating system from the HARD disk installation > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm but I don't think it will work.
  So to get Vista back you have two options:
  -To order the Toshiba Recovery disk under https://backupmedia.toshiba.eu/landing.aspx and have the factory settings or
  -To install Vista using the Microsoft installation disc. All the necessary drivers, tools and utilities that you can download at Toshiba support page > http://eu.computers.toshiba-europe.com

  The second option is not so complicated and with our help, you can do this. ;)

• Tecra M4: Windows Vista fan speed

  Hello

  After upgrading my laptop (Tecra M4, 2 GB of RAM, 64 MB GeForce) to Windows Vista, the fan (left) seams to run all the time - just after the start of Vista. Of course, I installed all the current drivers and tools, as well as more recent (3.30) BIOS.

  I also tried to optimize the power settings in Vista. Here, I finally found the 'new' Toshiba PowerSaver (btw: the old PowerSaver XP tools are much better!).
  -Something I noticed: if I put 'Method of cooling' to "Battery optimized", the fan stops for a while, but I think that's not the solution?

  The CPU temperature is 43 ° C (checked with Notebook Hardware Controll), but RivaTuner said that the ambient Tempature GPU is approximately 127 ° C (which I can't believe because the temperature of the GPU Core is 'only' about 62 ° C). But also 62 ° C is quite high for the GPU - issn can't it? (there only to display Aero Glass on Vista)

  So I think my problem is the GPU (temperature, driver,...)?
  All the solutions on this point - or is the switch it on XP?

  Hello

  I agree with the tabbycat. Your model of laptop Tecra is designed and offered with Windows XP Home edition. Toshiba has designed the BIOS version 3.30 for this laptop and this BIOS is designed to support the Vista operating system. Before the installation of Vista the BIOS must be updated to the latest version (Windows XP Home edition).

  After the BIOS update, you must install Vista. Now you can backup all your data, install Windows XP Home edition, using a recovery media and update the BIOS.

  When finished install Vista OS and I hope that the laptop will work much better and you will be satisfied.

• Tecra M3 and Vista 32 - bit hibernate white screen

  Hello:

  I have the Tecra M3 running great of Vista Enterprise 32-bit.

  However, when the Tecra goes into hibernation in Vista, I can't go out there the hibernation mode. By pressing the power button, any key, space bar, move the mouse, click the mouse or CTRL-ALT-DEL does not work.

  I can only get out of hibernation by pressing and holding down the power button for 5-15 seconds to restart the Tecra.

  I have all the latest drivers installed on Toshiba site including the NVIDIA Display Driver Version 7.15.11.5663 for Windows Vistadriver_display_nvidia_os2007303a.

  THX.

  I read recently that, if this problem occurs, you must perform a BIOS update.

  Go here: http://eu.computers.toshiba-europe.com

  And check if you have installed the latest version of the BIOS. If this is not the case, the update.