Tecra M3 and Vista 32 - bit hibernate white screen

Similar Questions

• Install Windows 7 64 bit and Vista 32 bit on the same drive

  I have Vista 32 bit installed on my laptop. Media recovery is on a recovery partition, I have no recovery DVD such as $85 for something that should be included with my expensive laptop anyway, it is a bit much

  I have a drive to upgrade Windows 7 from my laptop manufacturer that allows me to each upgrade or to start from scratch.

  I want to install Windows 7 64 bit on a separate partition for the installation of my 32-bit Vista, but when I boot on the DVD there is no option to select the 32 or 64 bit, it only allows me to install the 32-bit version. I have partitions installed correctly then they arnt the problem. If I try to boot from the recovery partition to install Vista 64 bit on a separate partition, to upgreade can leave, he simply don't say so, it doesn't allow the recovery or replacement of my existing Vista installation. Also, often when I boot to recovery mode, by organizing 0 start up, he simply waits some time and the Vista of boots in any case.

  How should I do to dual boot Windows 7 64 bit and Vista 32-bit, as all possible ways I have tried do not work, and I can't afford to buy the madmen of... Toshiba recovery media ?

  The 'disc Windows 7 from the manufacturer of your laptop upgrade' can be used to improve the qualification system of operating from 32-bit of Windows Vista that was originally installed on the laptop.  It cannot be used for any other configuration or purpose. Carey Frisch

  Actually, this isn't just a "upgrade drive" it's a full disc of Windows 7, I know that I can install full Windows 7 32 bit in a separate partition for Vista.

  The problem is solved in any case, I managed to hide my Vista (C) install with Acronis and boot to the WIndows 7 DVD. It then allowed me to install Windows 7 64 bit on the other Partition, because he did not think that 32-bit Windows Vista has been installed on the HARD drive. I managed to deceive it by showing the menu options of 32 bits or 64 bits in this way... I assumed it was a protection system put in place by Microsoft to stop upgrade problems if soemone tried upgrade Vista 32, Windows 7 64

  Now under Vista 32 and Widnws 7 64 on the same computer.

• Synchronization and Vista 64-bit

  I have a Palm TX and Vista 64-bit and having synchronization problems (do not recognize the device when I try to synchronize).  I couldn't install the original/old version of the software (v 4.1.2 I think) and downloaded v 6.2.  Installed, it cannot synchronize.  I tried what you said worked for you by opening the Palm as an administrator, but that made no difference to me.  If anyone knows other alternatives, it would be appreciated.

  How you try to synchronize?  Via USB?  It can be done this way, as mentioned in dozens of discussions here...

  You have a wireless network set up in your home?  I wrote a file "how to sync a Tx via Wifi with Vista64" above it "sticky" gray display at the top of this section of the forum.   I use this method with my Vista 64 bit laptop easily!

  WyreNut

• Tecra A8 PTA83A - Vista 32 bit drivers needed

  Hello

  I'll try to find the drivers (Vista 32 bit) for this computer laptop pta83a - 04g 012.

  However, I can not even find the laptop on the Australian site. In fact I can't find anywhere what "A8" laptops at all.

  http://www.MyToshiba.com.au/support/download

  Can someone help me please.

  I also checked some other sites Toshiba from different countries without result.

  I wish there was an option to check through all countries, at the same time.

  Kind regards
  Paul

  Hmm... I'm not sure why this Tecra series is not listed on the page of the Australian driver Toshiba but same model Tecra A8E PTA83 is released in Europe also.

  

  You can download and use the drivers for your laptop that appear on the page of the European driver Toshiba
  http://www.Toshiba.EU/innovation/Dow...jsp?service=EU

  The drivers are fully compatible

• Classic question: SSL VPN Client and Vista 64 - bit OS

  Material: 64-bit software architecture: Windows Vista Home Cisco Hardware (64-bit): 871w router Cisco Software: base of 12.4 T having a challenge with Windows Vista (64) using the SSL VPN. Use of IE, I can navigate to the url, both using the DNS name and IP address. I do not have a signed certificate, so I get the standard warning screen where you will need to click on the red x to continue. At this point, the progress bar moves for a fraction of a second and it's there. For troubleshooting I tried: - clearing cookies, cache, etc. - add url and IP to the Zone of confidence - reset areas rest default - disabled options window popup and phisher IE7 - off all 3rd party Manager BHO - withdrawal of MacAfee software suite - disable User Control that allowed me to make the sign in page, but after the signature - I had a blank white screen. Then, I downloaded Firefox 3.0 (newer) and tried to connect. After a series of guests to accept and download the certificate, I was able to connect and click on the Start button to start the session. The next little screen came as expected and he chose Java. I received a message that it could not install the Cisco AnyConnect Client's and I had to download it manually. Downloaded and installed the client software. Logging out of the browser and its closure - I could not access the page again. It appeared to hang again with a progress bar. I went to empty cache, cookies, passwords etc in Firefox and reloaded the application. Still, I was able to connect. However, I always received the message that the customer could not install and download manually. For fun, I exported the certificate on the desktop and imported into Internet Explorer. I tried the connection with IE, but he had a similar problem. I was told there was no client IPSEC for OS 64 bit (Vista at startup), but most of the new machines are 64 - bit OS systems. I would appreciate any support. Lucky me, the computer to which it is impossible to connect to the VPN is the home of the CEO of the company. The last person that wants to make him miserable.

  Cisco AnyConnect VPN Client is now available for the Windows operating systems, which includes Vista 32 and 64 bit. The Cisco AnyConnect VPN Client, Version 2.2 supports SSL and DTLS. It does not support IPSec at the moment.

  See the url below for more information on troubleshooting anyconnect vpn client:

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00809b4754.shtml

  See the following url for the release notes for the version of the client anyconnect vpn 2.2 for use with windows vista:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect22/release/notes/anyconnect22rn.html#wp815989

• Satellite A300 and Vista 64-bit - unknown and non-functional devices

  I have the Satellite A300-1Gn
  Here are some features:

  Technology
  type: technology Intel® Centrino® 2 processor with processor Intel® Core 2 Duo P8400, clock speed of the Intel® PM45 Express and Intel® WiFi Link 5100 chipset: 2.26 GHzFront Side Bus: 1066 MHz2nd level cache: 3 MB
  
  Operating system
  GenuineWindows Vista® Home Premium 32 - bit Edition (pre-installed, Toshiba-HDD recovery)

  
  
  System memory
  standard: 3 072 (2 048 + 1 024) MB
  maximum extension: 8 192 MBtechnology: DDR2 RAM (800 MHz)
  
  Hard drive
  capacity: 320 GB
  Certification: S.M.A.R.T. disc rotation: 5 400 rpm
  
  DVD Super Multi (Double Layer) drive
  Compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD + R, DVD + R (DL), a DVD-R (DL), DVD - RW, DVD + RW, DVD-RAM
  Maximum speed: read: 24 x CD-ROM, 8 x DVD-ROM / write: 24 x CD - R, 4 x
  CD - RW, 10 x CD - RW, 16 x CD - RW, DVD-R 8 x, 6 x DVD-R (Double Layer), the HS
  6 x DVD - RW, 8 x DVD + R, DVD + R 6 x (dual layer), 8 x 5 x DVD-RAM, DVD + RW
  type: DVD Super Multi (Double Layer) drive
  
  Display
  "size: 15.4"
  type: Toshiba TruBrite® WXGA + TFT high brightness display resolution internal: 1 400 x 900
  
  Graphic adapter
  Manufacturer: ATI
  type: ATI Mobility Radeon™ HD 3650 supporting HyperMemory™ technology memory amount: 512 MB dedicated VRAM (up to a total of 2 302 MB available)
  graphics memory using HyperMemory™ with 4 GB of system memory technology)
  memory type: GDDR2 video (500 MHz) bus RAM (resp. RAM video and system memory combined) connected: 16 x PCI Express...

  I installed windows vista 64-bit to try it, and I started to download all the drivers I could find from Toshiba site... But I still have in my device under 'other devices' management 3xbase system of the device (who report that they do not work) and an unknown device "it works ok same woithout this, but my HD movies are restless...
  Is it posible to thath I missed something... Bluetooth, wireless, sound, games, camera, mic, etc., everything works...

  Thanks in advance guys (or girls);...

  Hello

  Have you installed the right graphics card driver?
  The Sat A300-1GN belongs to the PSAGCE series.
  I checked the page of the Toshiba driver and there are two pilots;
  I think that you should choose the ATI driver 8.477 display because this driver supports the Mobility Radeon HD 34xx/36xx chips.

  Other base system devices could be Bridge Media slot (for SD cards), touchpad, HDMI Control Manager.

  I didn't find these drivers 64-bit on Toshiba page. Maybe you should choose some drivers for Vista 32 bit

• Qosmio X 300-130 and Vista 64 - bit - on screen display do not work

  Hello

  I recently bought a laptop X 300 - 130 Qosmio comes with Vista Home Premium.

  The problem was that I couldn't get on our field to the office. So I installed Vista Business 64-bit. I found all the drivers online and everything works perfectly except for my on-screen display (during the change in volume, contrast, etc.). Can someone please tell me what software or the pilot did I forgot and where can I find it?

  Concerning

  Only VAP help much.
  Have you installed all the stuff for Vista 64-bit of the Toshiba download page?

• Satellite x 200-213 and Vista 64-bit

  Hello

  I have a 200-215 x is the processor, T7500, capable of running Vista 64 bit and it is worth just for Windows Vista to recognize 4 GB of memory, I installed.
  Thank you

  Hello

  I think your laptop could support 4 GB of RAM.
  If you are unsure, consult your user manual. It should there have mentioned what memory modules are compatible.

  But note; that can of OS 64-bit Vista uses the full 4 GB of RAM. The other 32 bit OS can see only 3.2 GB.

  If you want to use 4 GB of RAM, you must make sure that the Chipset, BIOS and operating system offers support for 4 GB.

  Good bye

• Re: Qosmio F50 and Vista 64-bit - touchscreen and fingerprints do not work

  Good day everyone,

  I just installed Vista 64-bit on Qosmio F50 (reinstalled vista 32-bit) I downloaded the driver from the Web from Toshiba site but who have still two functions does not!
  The first is the touch panel works do not at all and the second finger printing system...
  Can someone help me solve...

  Concerning

  It is not easy to say what the problem is here, but I assume that you forgot to install something or you have installed something in the order of poor facilities. If you need the right one let us know.
  I can see on Toshiba download page fingerprint software and touchpad drivers are available. If touchpad doesn t work not at all may be turned off. Check with the FN + F9 key combination.

  What touchpad driver, you have installed?
  Software fingerprint AuthenTec is installed too? can you start and save your fingerprint?

• Problem with Satellite A300 and Vista 64 bit

  I just bought a Toshiba Satellite A300-1CO model: PSAJ4E-03R015PT, which came with an impressive 4 GB of ram device.
  I knew with Vista 32-bit, only 3 GB would be available, but since I got a license of Vista 64 bit I care, came home and installed it.
  When I looked up the drivers on the toshiba site, no drivers for Vista 64 bit drivers were available!
  I have now 4 GB or RAM available and I also have problems with face recognition software, microfone, sound card, card reader and a few other things.

  I searched the websites manufactors drivers and I managed to get some of these things barely usable, I don't think that it is a SD solution.
  Other laptop brands are made available long drivers for vista 64 bit some of them even for XP 64 bit!

  I would like to know how long take to Toshiba do official drivers available for vista 64 bit on their Web site.

  Best regards, Pedro P.

  I was looking for 64-bit drivers for my laptop, but since this is a new model, the drivers were not yet available. I checked a few weeks later and they were no longer available.

  Just wait awhile, they should be available soon.

• Satellite A350 - Question about RAM and Vista 32 bit - 64 bit

  I bought a Satellite A350 Tiger Direct. He moved with Windows Vista 32 bit.
  It is capable in my view up to 8 GB of Ram. Vista 32 bit does support 3.

  All reviews on this laptop online say that it came with 64-bit and 400 GB of memory.
  Mine came with only 230 GB of memory and 32 bit vista. I ran Belarc advisor, and he tells me that my computer is 64-bit ready.

  Is this true? Why is - this me came not with Vista 64 bit?
  I want to upgrade my ram but with 32 bits, which is not possible and according to Microsoft you cannot update 32-bit to 64-bit.
  So should I buy Vista 64-bit upgrade? (for around 300 euros!). Is this in any way about this?

  What are my options? I want 4 GB of Ram or more really bad...

  What Satellite A350 do you have exactly?

  AFAIK the most recent series of Toshiba laptop pre-installed a dual operating system;
  In this case, you can choose between Vista 32-bit or 64-bit.

  To obtain the 64-bit, you will need to restart the laptop and have to press F8.
  Here you must choose the option to fix my computer. Then select Toshiba HDD recovery and finally, you should see the option which would be you can toggle between the 32 and 64 bit.

  Usually the Vista 32 bit supports 3.2 GB RAM.
  Only the 64-bit Vista will be able to recognize 4 GB and more.

• Question about Satellite L40 and Vista 32 bit

  Hey all, I have the following problem.
  I have Satellite L40 series 2 PC and tried to install vista ultimate 32 bit, and they freeze only on the process of "complete installation."
  I read in some other forums and found it is not only my problem. I tried with 64 bit ultimate, it's all OK. It may be, the main problem is that it is not possible to install VISTA 32 bit.
  I only ultimate now, so my question is if anyone knows or installed to another type of Vista 32 bit on these series?

  Thanks before

  As far as I know that all new models of Toshiba laptops come with Vista 32 bit. Satellite L40 is offered in three different models, and each one also comes with 32-bit operating system. If you have the recovery DVDs with your laptop is Vista 32 - bit OS. I assume it must be the Home Premium version.

  I don't have a model L, but my model works well on Vista Ultimate.

• Web Cam and Vista 64-bit

  My pc running Vista 64 bit does not start until the sex cam plugged USB is unplugged. Once Vista is running that I plug the webcam, the driver is loaded and everything works OK. I agree that it is without great effort by unplugging the web cam, but anyone have an idea as to the reason? I used this webcam on Vista 32 bit with no problems.

  Thanks for all the suggestions guys. Now I gave up my quest. I accept the fact that my web cam can be connected until after the pc has been started. Is there something in the bios that seems to only detect cam and webcam sex and decided to stop. I tried all the tips suggested without success. I think that the customer service at HP guys can know more they say. When the problem has been given to them they responded immediately by blaming Vista 64-bit. The impression I got was that it was, for them, a common problem. I have Windows 7 on a second HD on my pc and the same problem exists. The common factor is the bios on the pc.

• Sharing a Kodak printer between win 7 64 bit and vista 32 bit

  I have a kodak esp 3 printer connected to a vista 32 bit desktop pc. I share this printer on a wireless network in my house. I try to print from a laptop 64-bit windows 7, but failed to add this network printer to the computer windows 7. I think all I need are the x 64 drivers and add them via the systems vista printer properties.

  We now print by saving the document in the "Shared Documents" folder of mobile access and then print from the vista machine.

  After three long chat, phone and e-mail conversations with the technical support of kodak, what they say is this printer can't print wireless.

  They do not understand, it is a shared network printer, and I'm not trying to print directly to the printer via wi - fi, because I know that that does not support this printer.

  Any help, advice or where I could get a kodak 64 bit print driver would thank you very much

  
  

  Hi, I had not checked on this for a while, I couldn't get anywhere with x 64 drivers for Kodak for us would simply send documents on the Vista desktop, and then print them. So finally last night I upgraded the Office to Win 7, the upgrade price on Amazon is great-now $89, all problems are solved, put in place a homegroup print, share files and listen to music and video. Big difference in the performance of old desktop of 3 years. I should have done this 6 months he is a. sorry I have no solution to the original problem. Thanks - Matt

• OfficeJet 4315 and vista 64-bit

  I'm transferring my officejet 4315 from a computer windows xp on a computer on windows vista (64-bit).  I find the drive on the HP site, however, once the download is complete, the file disappears from the download window. A search of the computer does not find the file either.  HP Total care is incapable of solving the problem and it's not even a cd for the driver.  Does anyone have a suggestion as to how I can use this printer with my new computer.  Thank you - Olivia

  I just added an hp F4135 to a vista hp 9552f 64 bytes, use the original installation disk of the printer and follow the intructions, when the computer tells you to stop DO NOT remove the disc from the drive.  There are approximately 8 steps that will make the model.  Even thoughj you get msg saying printer is ready.  Wal until all steps have been completed. etc. (estimated time of completion about 30-45 min.)   the pilot is not for download.  How ever it should be included under the printer in Control Panel.      Good luck