Tecra M9 - view question utility of the device change

Similar Questions

• Can simple Question - I do the colors change in tabular form

  Can simple Question - I do the colors change in tabular form.
  How can I change the colors, green, white alternating on tables?

  Doug,

  Here's some javascript that I use for tables/reports of Ray...
  Don't forget to replace "t15" with your model references.

  
  
  
  
  Also, if you go edit the report template > Column Templates > Column Template 1 > You can set the condition to even/odd rows and then add in your own html/css..
  
  

  #COLUMN_VALUE#
  

   -Chris
  

• XAV-701HD questions, even after the update - changing Staion, no sound after the cycle of keys.

  I have a Sony XAV-701HD installed in my 09 Ram. I have had for a while now and still have problems even after the last update of the firmware. Since I installed the radio, the stations would change when I turn off the key and then restart the truck. Ususally a station off where I was listening. Then I noticed that when you listen to a CD, if I stop the truck, stop, and restart, I have sometimes no sound from the CD unit that change source to something else then back to CD. In addition, it seems to take an eternity for the CD start playing when I insert one, or when I start the truck every morning. Sometimes the CD start just up, other times not. Now, I've added SiurisXM to the unit, and I noticed that when I turn the key off the coast, and then back on, the device will not be playing Sirius Music until I have changing source, let the next launch of source for play, then switch back to sirius. I'm a professional installer, I know all my wiring is good, everything works. My Kenwood has worked perfectly in the same truck for 2 years before I changed to the Sony. Any ideas?

  
  

• Name of the device changed but always communicate with the same device

  Hello!

  I have two 6501 NIDAQs that I use in two different test of PRINTED circuit board equipment. I gave them names 'Dev1' and 'Dev2.  For some reason they cannot not be plugged into the same computer at the same time (USB), given that my TestStand/LabView application does not be able to tell one from the other.

  If I run my first try using Dev1 and try to run the second test, uses now Dev2, my DAQAssistant - although I see that Dev2 is sent to its "DeviceName" - still communicates with Dev1.

  Now, if I unplug them and then run one of the tests, it will break because of the "task without name. If I then go to NI Max and simply click on "create task...". "and cancel it, it will work until I have another plug in and unplug my only current. Now, I'll have to repeat step 'create task... '. "to get my new device work properly.

  Is there anyone who has had a similar problem and have been able to solve it?

  Hello

  Thanks for the help.

  It turns out that the problem was the option of loading TestStand. If I choose to unload every step after the execution of the sequence file, the problem is resolved.

  Concerning

  Kristian

• Canon 5dm 3, EOS utility - remote live view - can't stop the automatic exposure.

  Canon 5dm 3. Addicted to the PC running view EOS utility - remote control - live. Utility EOS insists on auto exposure even if the camera is set to manual and ISO is NOT automatic.

  Hi mannfilm!

  Thanks for posting.

  I would like to ask a questions in order to get a better understanding of the issue and what can be the cause of this.

  1. When you look at distance window, the letter M appears indicating manual exposure is defined?
  2. What exposure values change?
  3. You have activated exposure Simulation?
  4. The resulting image appears different from the image you see in the window?

  If it is a time sensitive matter, additional support options are available to contact us.

• Beginner question absolute to the Labview with GPIB connection device

  Hi all

  Firstly, sorry if my question is already posted, but I tried searching with nothing doesn't.

  My situation: I have a HP digital osciloscope, a HP 54602 B using the GPIB and trial version of labview 8.6. Now, I want to communicate with her from labview. The big question is: how? Before that I used only labview with NI DAQ card and serial port for communications of the instrument.

  the detailed question

  1 is it important (to programming in labview later) what GPIB interface that I use in my computer? Must be of OR? I still have no interface right now.

  2. I ran a search on the osciloscope Web site of NOR and find an instrument driver in:

  http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=E3B19B3E93F7659CE034080020E748...

  . How do they come?

  3. I know there are a few examples for the GPIB, but since I do not have the interface, I can't try it. Is it possible to simulate instruments GPIB?

  Thanks for all your help and assistance

  Hi opiq;

  Welcome to the world of instrument in LabVIEW Control!  I'll try and answer your questions one-at-a-time:

  1. N ° from a point of view of LabVIEW, you can use any interface supported by VISA and your instrument bus.  This includes (but is not limited to) boards of NOR-GPIB, 3rd-party GPIB, USB, LAN, LXI, VXI, PXI, etc..  Of course, if you do not have a GPIB interface, I would recommend a NEITHER - this is the safest way to get the experience 'it works '.  I tend to use an adapter USB GPIB (DISCLAIMER - I work for the OR).
  2. You have two options for installing the device driver.  "" The simplest is in LabVIEW to select Tools "Instrumentation" instrument Drivers find... and use our instrument driver search tool which will be step helps you locate, by downloading and installing the driver.  The other option is to download the zip file, unzip it in \National Instruments\LabVIEW 8.6\instr.lib and restart LabVIEW.  So if you look in your palette of instrumentation, you should see the driver listed under instrument drivers.  The pilot will include some examples of the use of the driver (are all certified instrument drivers).

     In fact, I would recommend this driver rather than that you connected.  It is a more modern design and install examples in the viewfinder of the example ("Help" find examples...).

     Here's a video of the above process (for a different instrument, but the process is the same)

  3. Unfortunately, there is not an easy way to simulate this instrument.  I would just recommend familiarizing yourself with the examples before acquiring a GPIB interface.

• in Device Manager, I see yellow question mark in the infront of ISATAP adapter #5 network drivers... its donations windows cannot load the device code 31 driver... Wat shud I do? answer as soon as possible...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messagesn Device Manager I can see yellow question mark in the network in front of the ISATAP #5 card drivers... failed to load its donations driver for device code 31 windows... Wat shud I do? answer as soon as possible...
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Control Panel - Manager of devices - right click on those - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
  and on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to determine if the device supports portrait / landscape views?

  Is there an easy way to determine if the screen of the device supports portrait / landscape views?

  (We need to provide different settings for the user)

  Until recently, we used check similar to the following:

  If OS > = "6.0" & AccelerometerSensor.isSupported)

  but this code does not work on the new Bold 9900 (which has the accelerometer, but has no landscape mode).

  We are looking for a solution that doesn't invlove by manually checking the models...

  Thanks in advance!

  You can use the DeviceCapability.isRotationSupported method to determine this.  This class has been added in BlackBerry Device Software version 6.0.

• When I try to view my devices to Control Panel/hardware and Sound/devices and printers, he treats forever and does not show the devices.

  When I try to view my devices to Control Panel/hardware and Sound/devices and printers.  It treats forever and does not show the devices.  I need help!

  
  Original title: device and Printers window
  There could be various reasons why the window devices and printers stalls. All the control points are listed here.
  Fix devices and printers folder is completely empty in Windows 7

• BlackBerry Smartphones Emails sent from the device is not displayed in the "sent"box and "BIS" question

  Dear all and Rim:

  New to the BB world, need more help...

  AOL mailbox to connect with 'Tour' with success, the service provided by Verizon.

  Emails sent from the device are not show to AOL "Sent Box" or "IMAP" Outlook Express / outgoing server "POP" record "SMTP."

  Really need copies of "Sent Box", thanks for the help!

  Also try to put in place 'BIS' accout, error message says:

  "Your account is not accessed through a browser HTML...".

  Please use your device to access the Black Berry Internet services"

  I used this link:

  https://bis.na.BlackBerry.com/HTML?brand=VZW

  Thank you,

  Jan

  For the mail issue seems to send me a copy is the only way to go, right?

  This would be a solution.

  And on the BRI, my test was on a PC, it did not work...  Anyway, I was going to connect to the BIS to work on my question above, but seems that it does not help now, then it does not matter if I enter or not.

  Well, it's quite strange... I just used who link me (from a PC) and get my BIS account very well. You can, however, use the interface for device BIS - watch this demo that I you provided above for instructions on this. BIS is simply a service provided by your operator. The PC/Web site method and device interface - these are simply two different interfaces in the same Department, so using one or the other is not serious... they cause the same thing.

  Good luck!

• Error ""cannot connect to the device", Viewer images/key chain brookstone.

  * - Original title - brookstone Keychain photo viewer

  I am using windows 7 I have the installation disc for my photo viewer when I open the program I get a box that says "unable to connect to the device?  Help!

  Hello

  How do you connect the Keyring image viewer?

  A)-tips to troubleshoot USB devices: http://windows.microsoft.com/en-us/windows-vista/Tips-for-solving-problems-with-USB-devices

  (This applies also to Win 7).

  B)-install a USB device: http://windows.microsoft.com/en-us/windows7/Install-a-USB-device

  I hope this helps.

• How do I restart the question VCENTRE 5.5 device

  I currently have two servers ESXi VMWare vSphere 4 Essentials x and will upgrade to 5.5 soon and ongoing.

  I've already updated my server vcentre for the new device vcentre I have running on one of the servers very well.

  I have the new vsphere 5.5 client installed and works very well also.

  My question is this:

  If I stop the ESXi server who runs currently vcentre unit how can I vcentre restarted again when I go back to the server?

  Is there a way to do this because I don't want to be more than the time needed for maintenance I have to do on the server.

  I fear that I will get looked out and not be able to get the device vcentre began as there would be no way to do it.

  I would appreciate all your comments and thank you in advance.

  The vCenter Server Appliance can be cast on the ESXi host and any other virtual computer. Just use the vSphere Client to connect to the host on which the VCSA is registered and start it. Just make sure that you have both versions of vSphere Client installed on your system, one for the ESXi 4.x hosts and the other corresponding to your version of vCenter Server.

  André

• Zero error of the client certificate provided is not rooted in the devices certificate store after upgrade to the Horizon view 6

  We have just updated our infrastructure VMware View Horizon of 5.3 to 6.0.1 and all zero clients are provided certificate is not rooted in the devices certificate store.  The certificate on the brokers of the connection has not changed.  Customer relationship connections Horizon view a connection, as well as when we connect to the connection to the server via a web browser.  We had no cert errors before the upgrade.

  You need to add the following as PEM files to fix the problem on the zero client.

  The intermediate certificate - DigiCertCA.crt

  The root - TrustedRoot.crt certificate

• Is the device fonts _serif * only * to view games Latin1 characters and Cyrillic in FTE?

  Hi all

  I think I understand, is that in Flash Player 9 and below TextField object was able to display any character language of the East Asia through fonts device "_serif", "_without" or "_typewriter".

  New FTES provided with Flash Player 10 TextElement object seems to use device fonts "_serif" only for games of Latin1 characters or Cyrillic.

  For example, FTES uses "Simsun" (rescue) police device to display Chinese language and characters for characters in the thai language, police FTE uses 'Angsana New' (of aid) of the device.

  My question is:

  Why does not TextElement of FTE "_serif" use device font to display characters language thai or Chinese as it did brother TextField in Flash Player 9 and below?

  The problem with fonts "SimSun" or "Angsana New" are not present in the Windows XP operating system (in English) at default install installation configuration.

  I'd put it simply - how older TextField component of Flash Player 9 is able to display thai characters when there is no other police of this device on Windows XP with Thai glyphs in addition to Tahoma and Microsoft Sans Serif fonts?

  TextField relies on GDI to do the layout. GDI supports mixed fonts: fonts that use the OpenType layout for some scripts and layout not OpenType for other scripts. Tahoma and Microsoft Sans Serif are mixed fonts.

  FTE does not support these mixed fonts, or more precisely: If there is provision OpenType for any script, we use the OpenType layout for all scripts. Our choice means that Tahoma and Microsoft Sans Serif cannot be used per FTE for thai. We felt that the benefits of not dealing with mixed fonts offset the disadvantages. In particular, if the user of a system can read thai, it is very likely that it will install other Thai fonts.

• 3 monitors listed in the Device Manager on Tecra A6 PTA60E

  I have a PTA60E A6 under Xp Pro SP3 with all updates.

  I notice that in Device Manager in the monitors, I have three monitors monitors under graphics cards and Play Plug listed abd, I have the Intel 945 chipset appears twice.

  How to get back to showing just one of each?

  Shaun

  Hello

  I have 2 different laptop with Win XP and Vista pre-installed.
  In both cases, the three monitors are available and listed in the Device Manager.
  I guess there is nothing wrong with the system and the entries are correct.

  You don't have to be worried about that ;)