Tecra R840-16V down internet (no wireless or ethernet) connection

Similar Questions

• TECRA R840-16V to win7 64-bit to win10 level

  I tried to upgrade my Tecra R840-16V (number PT429E-05M00KGE) form windows 7 64 bit pro to windows 10 pro through windows update. During the upgrade procedure is complete all seemed ok, but after a while, the system froze (even the mouse). I did a reboot in my system via the power button / stop, the system has worked well for about an hour and froze again. I did a reboot via the Start button / stop, one more time and I had the same problem after all. I did a restore of the system in windows 7 and everything works fine without any gel at all.
  Is this a known issue? Is there a solution or suggestion to update my system without problems on windows 10 pro?

  Thank you

  Posted by axiotidis
  

  I tried to upgrade my Tecra R840-16V (number PT429E-05M00KGE) form windows 7 64 bit pro to windows 10 pro through windows update. During the upgrade procedure is complete all seemed ok, but after a while, the system froze (even the mouse). I did a reboot in my system via the power button / stop, the system has worked well for about an hour and froze again. I did a reboot via the Start button / stop, one more time and I had the same problem after all. I did a restore of the system in windows 7 and everything works fine without any gel at all.
  Is this a known issue? Is there a solution or suggestion to update my system without problems on windows 10 pro?

  Thank you

  Hello

  Never solved this problem, I have the same problem with my Tecra R840. I have windows 10 initial installation when it was first released, however had the freezing issue (System fan would also begin running at 100%, that is very strong but whole machine was locked and would require a hard reset). After a few weeks of this question, that I started Windows 7 and which would be fine.

  However, just tonight I thought I would try the anniversary 10 Windows Update to see if that had solved the problem, unfortunately the same problem persists. After you have installed update Windows 10 anniversary (updated to Windows 7), the laptop freezes still. There a simple 3 minutes after connecting the fan turns 100%, and everything froze upwards.

  Thoughts/ideas or help here would be appreciated?

  See you soon

• my computer will connect to the internet normally using the ethernet connection.

  my computer will normally connect to the internet via the ethernet connection.

  However when I try to connect by wireless only Skype will work. Explorer or firefox can not connect.
  can someone help please.

  Hello

  From your problem description, I understand that you are not able to connect wirelessly. Please let me know if you do not experience this problem.

  I suggest you try the steps from the following link:

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Also refer to links: Wireless and wired network problems
  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• Problems with access to Web sites in the laptop of my mother, both wireless and ethernet connections

  Original title: Internet issues

  My mother's laptop has suddenly stopped to access Web sites. I tried to explore, Firefox and Chrome using both wireless and ethernet... connections we both century link and I tried the two houses... my works laptop on both networks. All three browsers connect to the internet, but not all pages opens. I ran the store and he told me that I should look online for more help... which is not the case, but it cannot determine the problem. Any ideas?

  Hello

  Welcome to the Microsoft community.

  I understand that you have a problem with access to Web sites. We apologize for the inconvenience caused to you and appreciates your efforts to try to resolve the problem.

  I would like to know the details below to help you better

  1. Do you receive an error message/code when you access Web sites?
  2. Do you think that any symbol with exclamation on the icon of this internet access on the taskbar (right)?

  I ask you to try the steps in the Microsoft Help article below and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Also I ask you to reset TCP/IP and check if it helps.

  How to reset TCP/IP using the NetShell utility
  http://support.Microsoft.com/kb/299357/en-us

  Keep us updated on the issue to help you better.

• You want to connect laptop that is only temporarily used wireless to Ethernet connection...

  This seems to be a simple question, but again I received conflicting answers.

  I have a laptop (Toshiba Satellite U305-S5077) running Vista HP SP1.   The office that is connected to my router has developed age problems; He ran Xp2.

  If I want to connect my laptop via Ethernet temporarily for example to change the settings of the router, I have to manually disable my wireless connection, firstly, and then he reactivate manually after disconnecting?

  A source said that Windows does NOT automatically, to ensure stability & connectivity, this should be done.  Another source said no need.

  In short, can I just plug my laptop into the Ethernet without do something else first?

  Your recommendations?

  Thanks in advance for advice and counsel.

  MWQ133

  My recommendation would be to disable the wireless device when you use the wired Ethernet connector. Brian Tillman [MVP-Outlook]

• Pavilion G6-2399sa: wireless and Ethernet doesn't work anymore since the upgrade to Windows 10

  Upgrade the laptop for Windows 10 today (8.1), or wireless or ethernet connections are available to connect to the network with since.

  Device Manager indicates that the two pieces of equipment are working properly.

  I tried to uninstall Win 8 drivers and restart the laptop. Windows installs generic drivers for devices and reports that they are working properly. The links do not appear in network connections.

  Also flight Mode light is constantly display orange rather than white even after disabling the operating system flight Mode. Pressing the F11 key does not change the State.

  Card manufacturers seem to be all WIndows 10 pilots available is HP.

  He handpicked the Lenovo's Office. I guess he will do the same on HP laptop

• Tecra R840 WLAN sporadically not have access to internet or router

  Hello

  A few days ago I baught a Tecra R840. Everything works fine but the WLAN adapter. Basically, Internet works, but sporadically - especcially during downloading files - the wlan adapter loses the connection to internet/router.

  It is always connected to the router at full speed, but it says 'limited access' and the download is interrupted. I then manually disconnect the network and then reconnect, it sometimes takes 2 or 3 tries. But it still works for a few minutes.

  You have an idea, what can be the reason for this problem?

  Concerning

  Martin

  Post edited by: moadin80

  Hello

  There are some things that should be considered;
  -Update the WLan driver
  -Deactivation of energy saving for the WLan

  Did you check both?
  If this isn't the case, please update the WLan driver.
  In addition go to Win 7 power management and disable the WLan to save energy.
  In many cases, this affects the Wlan functionality.

  If your router has been set to 802. 11 G, then you must choose this also on your laptop. Reach:
  Panel-> card Wlan-> properties-> Advanced tab
  Here you will find a few different options that can improve performance. I m not very well what settings you have for each wireless network card supports different options.

• Tecra R840-16J - Win 7 installation - how?

  Hello

  I want to make a new one. Clean instal win7 Pro in my Tecra R840-16J (a BSOD appeared only 6 months after I bought it!). I'll install an SSD too!

  Could someone tell me how to do? (I mean, which drives should I have to install hel?) I downloaded al 48 discs and Aps for my model when using win7 64 bit.

  Kind regards
  Paulo

  Hello

  Install the drivers in the following order:

  Windows 7 64 bit

  Driver USB-Serial V1.3.0
  PlayReady PC Runtime 1.3
  Infineon TPM professional package 3.60.2071.00
  SW 9.2.0.1015 Chipset installation utility
  Intel Management Engine Interface 7.00.02.1164
  Intel AMT 7.00.02.1164 software
  8.801.2.1 - 101225 a-111146C-Toshiba AMD display driver
  Intelligent management of the TOSHIBA v1.0.2.0M screen
  Driver Intel Rapid Storage Technology 10.1.0.1008
  Realtek Audio Driver 6.0.1.6271
  Intel LAN driver 15,7
  USB3.0 Driver 2.0.32.0rior
  ALPS Pointing Device Driver v7.x6.303.106_A
  Synaptics Touch Pad Driver 15.2.4.4
  Driver O2Micro 1.1.4.207G smart card reader
  TOSHIBA value added package 1.4.1
  Ricoh 2.11.17.02 card reader
  Intel Wireless LAN Driver 14.0.0.113.0.s64
  Intel Proset 14.0.1.0.0.s64 & 13. 3.0.0.1.s64
  ConfigFree 8.0.35
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 13
  TOSHIBA Fingerprint Utility V1.0.2.36
  TOSHIBA Web Camera Application V1.1.2.13
  3.1.3 TOSHIBA face recognition
  Utility of rotating 180 degrees TOSHIBA v1.4.0.0
  TOSHIBA eco Utility 1.2.21.64
  TOSHIBA HDD/SSD Alert 3.1.64.6
  TOSHIBA HDD Protection 2.2.0.12
  TOSHIBA Service Station 2.1.45
  TOSHIBA PC Health Monitor 1.7.3.64
  TOSHIBA Sleep utility 1.4.1.7F
  TOSHIBA V4.00.4.12 VCR - HAS
  Intel Wireless Display 2.0.27
  TOSHIBA v2.0.4 synchronization utility
  TOSHIBA Media Controller 1.0.85.4
  TOSHIBA Media Controller plugin 1.0.5.13
  PatchFiles

• USB drive not recognized on Tecra R840

  My Tecra R840 will not only recognize the USB memory sticks. USB works fine with discs hard USB and wireless USB mouse. Help! Any ideas? Thank you very much

  Have you tested with different USB keys t and connected to different USB ports?

• WRT610N wireless can not connect to internet

  I have a WRT610Nv1. It worked perfectly for about a year until my internet whent out. I have reset my modem and the router and one day more late my wireless connection could not connect to the internet. I can connect to my wireless router, but I can't do it to the interenet. However, if I use a wired connection, I can connect to the internet. I have tried power cycling, releasing the ip - IP, MAC address, change the beacon interval, fragmentation & rts threshold, change the ip address of the router, encryption, disable my firewall, disabling of cloning to renew the upgrade of the firmware.

  I even bought a new WRT610Nv2 and had the same problem. I spent four hours on the phone with support linksys technique, and they couldn't help. Only, they went through the basics and everything I had already tried. I call the comcast tech support, and they say it's a problem of router and they can't help me.

  I have comcast cable with a modem of the RCA, a Dell XP laptop.

  Ethernet wireless network connection card:

  The connection-specific DNS suffix. : hsd1.ca.comcast.net

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IP address...: 192.168.2.100

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. :

  DHCP server...: 192.168.2.1.

  DNS servers...: 192.168.1.1.

  68.87.76.182

  68.87.78.134

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : hsd1.ca.comcast.net

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IP address...: 192.168.2.101

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.2.1.

  DHCP server...: 192.168.2.1.

  DNS servers...: 192.168.2.1.

  68.87.76.182

  68.87.78.134

  Any help would be greatly appreciated.

  Finally! I copied the MAC address of my wireless card and manually put in the MAC address clone. This does not work, then I went back and clicked on the 'Clone MAC from my PC' button (which I had already done a dozen times before). After ten days, I guess the stars were aligned and the network gods were looking down on me because he suddenly started working.

  So I'm crazy and tried to restart my laptop, and it still works. So for fear of messing with anything now, but I'm going to live dangerously and turn on encryption.

  Thanks to all those who have offered support.

• Tecra R840-S8450 - power problems - help with Blink Codes

  Looking for help, thinking on the right track, but want to confirm and get things fixed.

  Have a Tecra R840-S8450 that is having power problems. When you try to start it, the orange plug light flashes a code. This code is 01001010 which I derived shortlong short short long short long short flashes of orange electric light.

  It is great progress, assuming that I have translated as right to 52 h, which is equivalent to 'EVER5V voltage is under or equal to 4.5V when the computer is '.
  Start ". However it don't tell me what is wrong so that I can try to do something about it.

  Would be grateful for the help, thanks,

  David

  Of course quite here, is that no one from Toshiba has the manual to find codes?

  Posted by dgwbdavid
  

  Looking for help, thinking on the right track, but want to confirm and get things fixed.

  Have a Tecra R840-S8450 that is having power problems. When you try to start it, the orange plug light flashes a code. This code is 01001010 which I derived shortlong short short long short long short flashes of orange electric light.

  It is great progress, assuming that I have translated as right to 52 h, which is equivalent to 'EVER5V voltage is under or equal to 4.5V when the computer is '.
  Start ". However it don't tell me what is wrong so that I can try to do something about it.

  Would be grateful for the help, thanks,

  David

• Tecra R840 - Ethernet and driver sound Dynadock question

  Hey,.

  Tecra R840, model PT429A-007004, does not work with the Toshiba dyna docking station.

  Specifically, the Ethernet and the audio driver for the dock dyna is not installed after running or installing the driver on the cd of the dock dyna or the latest driver on the site.

  Does anyone know a fix for this?

  Note: nothing in Device Manager to say that these pilots to dock a missing, only when you install the driver mentioned the wizard that Ethernet and audio drivers might not be installed.

  He also mentions that the dynadock has a problem with the graphics card edge, but we have not had problems with graphics, for example screens.

  > where to install the driver only mention Assistant that Ethernet and audio drivers might not be installed.

  _Regarding the driver LAN and Audio missing. _
  This theme has been discussed already in this thread
  http://forums.computers.Toshiba-euro...ThreadId=70771

  _The possible solution: _
  Navigate to the folder * C:\Program Files\DisplayLink Core Software *
  And here you should find the drivers for the network and its

• USB does not wake up after Tecra R840 goes to sleep

  Hello

  I have a Toshiba Tecra R840 on windows 7 sp1. I use a USB mouse, but whenever I put my laptop to sleep I have to go out and re put the dongle insert it again.

  I've changed the following power options:
  Under devices, USB, USB Root Hub power management "allow the computer to tun turn off this device to save power" is not checked

  It goes the same for generic Hub
  Under control panel, power options, USB, USB selective parameter settings is disabled.

  Does anyone have any suggestions?
  Thank you
  Tony

  Have hmmm you tried to remove/delete the USB hubs and controllers from Device Manager and install it again?
  Usually after restart again the system should automatically find the drivers and needs to be reinstalled all USB controllers once more

• Tecra R840-109 - alert HDD - unable to get disk information

  I turned on my Toshiba Tecra R840-109 and everything looks that the factory settings have been restored, but I still have my files on the hard disk in the users folder (where the system has also built a temporary user I'm connected now, I guess).

  At the opening, the computer asked me to do the things you do when you get a new computer (for example accept the license, install browsers, register fingerprints, if applicable etc.). In addition, it showed an error, alert HDD/SDD saying "Could not get the information from the disk, cannot use the alert function".

  Is there a way to solve this problem, that is, to apply the previous (original) user?

  An obvious solution would probably be to restore the system, but I don't have a backup set to the top (which I will fix as soon as this problem will be solved). Tried to reboot, nothing has changed.

  Information on the mobile phone: http://www.toshiba.co.il/en/disconti...ecra-r840-109/

  Any help is appreciated!

  Hello

  To be honest situation described sounds pretty confusing and not logical for me.
  If you do not have recovery (DVD or USB) media create using preinstalled Toshiba recovery media creator tool.
  After this use this bootable media and reinstalling the recovery image so you will have 'presets' again. After the installation of clean operating system, it is not possible to have the old data stored on the HARD drive, not on the C partition.
  The fact is that before the installation of recovery begins any HARD drive will be deleted and formatted.

  Sorry if I got you. If you have any concrete and clear questions do not hesitate to ask.

• Screen replcement on Tecra R840

  I wonder if anyone can give me some advice on replacing the screen on my laptop Tecra R840.

  The screen is described as follows:
  14 Toshiba HD anti-glare LED (1366 x 768) high brightness backlight screen.

  I would like to know if it is possible to do a straight replacement of this screen with a version high gloss?

  I prefer the very glossy screen, because it seems easier to read the detail on the screen when the light is very bright. Just before there is no notice on the brightness of the screen, the level is already enabled for maximum brightness.

  I already asked a supplier to screen in London [I am based in the United Kingdom] who said that there should really be no problem, once the resolution figures are the same with a brilliant display of replacement.

  Perhaps, could somebody let me know if it's simple.

  parkman1

  Hi parkman

  It is not easy to help you with this, and it is not easy to pick up a few useful information on this subject.
  Goggling around, I found out that Toshiba uses two different views on this model Tecra.

  What could be interesting for you is the display used on Tecra R840-110. On this model Toshiba uses 14 HD glossy screen + with a resolution of 1600 x 900 pixels.

  Maybe this one will be right for you.
  I recommend you contact the nearest Toshiba service provider and ask for help or advice from God.