Tecra S1 starts with blak screen

Similar Questions

• Qosmio F50-125 starts with black screen after a BIOS update

  Hello

  After instalation if new bios (v 2.0), computer sometimes starts with black screen.
  Even the first page that show press F2 to enter the bios is not displayed.

  You have someone older version of bios?
  So, I might try if it's the fault of it.

  Hello

  I think that the old BIOS will not help you because the laptop would have known that you try to update the BIOS to the older version, and it would break to the top of the procedure.
  In addition, the older BIOS is not available on the European driver Toshiba page.
  I think just only a Toshiba ASP had an older version of BIOS.

  Anyway, you said that sometimes happens.
  This means that this issue doesn't still persist
  Hmm. in this case, I recommend the default BIOS settings and update the driver display.

  Check it out!

• I installed the software after installation my computer restarts automatically at the start with on screen start

  I installed the software after installation my computer restarts automatically at the start with on screen start

  Hello

  ·         Do you have what software installed?

  ·         You get the error message?

  Step 1: Try the following steps to disable the automatic restart in case of system error:

  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  (b) select turn off automatic system failure reboot when the Windows Advanced Options menu appears, and press ENTER.

  (c) Please provide the error if you get one.

  Step 2: Check if you are able to start the computer in safe mode.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MacBook (2010) starts with black screen with flashing Apple logo

  I recently got ahold of a Macbook Pro 2010 running very slow so I did a reinstall of the operating system (which was a living nightmare, Macintosh is not as easy to manage as it was at the time of PowerPC) once I got to the top and running, I decided to upgrade to the latest version of El Capitan (an update (not an upgrade I already had a version out there) once I rebooted and let the computer do its thing he began to start up normally, but after finishing the progress bar, he went to a black screen (with the screen still on) that flashed the boot from time to time Apple logo. I forced shut down the computer and start in safe mode with success (that's how I'm typing this post now).

  Thanks in advance.

  When you reinstalled, did you remove any third-party system before reinstalling.

  A Mac that runs in Mode without failure, but are generally not normally indicates some incompatible system changes.

  Software common problems are things that are intended to clean, protect, optimize, accelerate, or otherwise maintain your Mac.

• start with white screen and a page named do not work

  Firefox always start with most recent screen.

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  The user.js file will be present if you or a other software created this file and normally will not present.

  You can check its contents with a text editor (right click: 'Open with'; do not double-click).
  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

  Do not change the line browser.sessionstore.resume_session_once and change its value to false, but either delete this line or remove the user.js file (recommended if you have not created this file).
  The normal use of this pref is to reload the tabs when you need to restart Firefox (update or install an extension).

• Satellite Pro M40 sometimes starts with white screen

  Hello!

  I'm pulling out my hair with this problem.

  For no definable reason that according to me, my laptop will start with a blank screen.
  Not all the time, but, seemlingly, whenever it feels like I need extra help stress on my plate.
  For the most part, with perseverance (starting with or without battery, with or without the adapter, with or without pci with or without mouse usb network card and any combination of these elements), it ends by lights correctly, but sometimes Nothing that I won't get it to start and show me a screen.

  My M40 is 4 months old.
  Since it's purchase sent to Toshiba for repair twice for this problem, when I have exhausted myself trying to coax it into life. Whenever he was sent by saying either the problem has been fixed, or that he had no problem found/all systems ok / "it works very well for us, after testing all week."

  This week [edit: it was Wednesday], I sent it to me, and Yes, I checked the trunk upwards and gave a sigh of relief that there is an image on the screen.
  I wrote a letter to this topic a day or two later (that day he first gave me a screen white, but on closing down and restart, it was fine).
  Today, however, not a week later, I have a white screen again.

  I am reluctant to send for repair again, due to the stress involved and the time it takes and the technicians speaking it works for them.

  If anyone can help, or was faced with a similar problem, please respond.

  Oh, and the solution does not lie with the keys FN + F5, because I tried several times... unless there is a way to 'special' to build on them, I'm not in the running for!

  [Edit]: several hours later, as a demonstration of her bored this problem is, my screen is once more working.

  I went on once again, at the time and no joy. Then, after switching OFF, count to ten and the restart, eureka.

  I'll update with news as it happens. If there are all the necessary specific details about "switching on the environment", just let me know.

  Post edited by: jazziefox

  Hello

  Thank you for your update.
  It's a very strange question, and it would be very helpful if you can put yourself more observational.

• Satellite Pro U400-11V - Sharp noise when starting with connected screen

  Hello

  We received 5 x computers laptops Satellite Pro U400-11V, are excellent, with one exception:

  When you start (it happens on all of them) with a screen VGA monitor plugged in, a high beep is played from what looks like the speaker system. It occurs just before the first splash screen windows.

  Once the windows login screen is displayed a monitor can be connected to any problem & works very well.

  What can I check? I have had a look but do not find all the tracks so far, where this post.

  Thank you
  -A

  Perhaps you are meaning that the beep POST (Power on self test)?

  The laptop still sounds if the POST has been successfully passed.

  Parts of the motherboard will be verified during POST, and if everything is ok, a beep is displayed.

  If something would be a mistake, the laptop will not start and different beeps would appear.

  Welcome them

• Windows 8 starts with black screen on startup.

  Original title: BOOT WIN 8 on TOSHIBA SATELLITE

  Hi - I've updated to Win 8 on my Toshiba Satellite laptop.  Now, when I start the laptop, it shows the initial screen of Windows but will not perform the process to the lock screen or splash screen.  The screen is black and goes no further.  I have to press the off button and hopefully get to go in standby mode (i.e. when the power led is flashing).  So, I press the button to wake that then displays the lock screen.

  Someone has ideas on what setting could be the cause.  I have looked in the trunk of the BIOS but can't find anything.  Also can't find anything obvious in settings PC Win

  Thank you

  Richard

  Hi Richard,

  I would be grateful if you could answer the following questions:

  1. You have installed the latest drivers for Windows 8?
  2. What is the model number for Toshiba Satellite laptop?

  If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.

  Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:

   

  Method 1: To resolve this problem, update the site Web of Toshiba video card driver.

  Check out these Microsoft items for additional reference:

  Download and install the drivers

  http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:

  Windows 8 starts with a blank screen after a standard or hibernation

  http://support.Microsoft.com/kb/2756559/en-us

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• TouchSmart HP Envy 14 - laptop occasionally starts with black screen

  Hello and thank you for taking the time to look at my problem. My laptop is a HP Envy Touchsmart 14 8.1 Windows running. The product name is HP ENVY 14 Sleekbook TS and the number is E0M45UA # ABL

  My problem is that my computer occasionally starts with a blackscreen with my mouse in the Center. I can move the mouse but it will return to the Center after a few seconds. I can't seem to do anything but hold the power button and shut down my computer. After that I open it again, can I use my normal computer. I recently did an update of the BIOS of my computer and I don't know if that is causing the problem. How can I solve this problem?

  Hi Shibein:

  Thank you for your inquiry.  You can run the HP Support Assistant click here to help solve the problems and search for updates.  You can also run the ' HP PC Hardware Diagnostics UEFI" click here." "I am also sending documentation on " Touchpad, keyboard, or a mouse ",click here, and ' computer will start (Windows 8)"click here. If none of this has solved the problem, you can try to restore the bios updated"Bios restore" TouchSmart HP ENVY 14-k110nr Ultrabook support" click here, or restore your computer to a date when it was working fine. '" Here is a link to 'use the Recovery Manager to restore the software and drivers (Windows 8)'click here. If you need help can you give us the exact model on HP Envy Touchsmart 14 you have.   "How can I find my model number or product number?" click here.

• Vista Home starts with black screen with blinking cursor

  Hi, I have a toshiba satellite with Vista home, he stopped last Sunday, when I turn it on, start it start sbooting normally but then I get a black screen with cursor and is not go further. I tried last good known, tired, safe mode, I have same TOSHIBA recovery disk and does not either, when I boot from the CD, it seems that it is loading files, then the yellow bar on the work screen appears, but then I get the black screen with cursor, nothing after that.

  I took out HD and a Sata drive via the usb port to connect to my HP laptop. I was able to open the F and G, but C drive (where the OS is installed which has changed the letter e) could not open, he told me I need to format it.

  I have the original recovery disk for Toshiba, which works when the hard drive is not in the Toshiba, but when I put the hard drive back, I never the option where it asks me to repair or reinstall all.

  is it possible that I can use my laptop HP after the toshiba drive connected via USB, to repair the toshiba C partition (which is called E)?

  There are more than 2 weeks worth of work that are not backed up, and I wouldn't lose. Help, please.

  Hi MB1969,

  This seems like a hard disk failure. You must get in touch with Toshiba to get help.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

• Windows Vista starts with white screen - dwm.exe and dllhost.exe errors on the hard drive.

  original title: freezing after login! ... disk hard dwm.exe and dllhost.exe errors. As usual load screen and then nothing can be used/open to all. Occasionally start opens and closes and nothing else beyond.

  Cannot use the laptop mode safe mode with networking. Have you tried to repair registry free of bugs and using Vista install with view to repair OS repair disk, but there are a lot of people having this problem different from this problem with dwm.exe dwm.exe or versions/varieties. This is is produced immediately after the download and installation of Microsoft Updates I might add.  Please can someone help?  Thank you very much... LiZ :)

  Never use Registry Repair programs.

  They can cause more harm than good.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• X 200 fails to start with white screen

  Hi guys, I made the problem this morning. When I tried to start the computer, it could not start. the machine was normally closed the last time. with no beep, the screen remains white and black, without any modification. After 2 seconds after you press the powerkey, he was arrested with a short beep. Here is what I tried:

  1, use an external hard drive and a disc of windows 7. no reaction.

  2, remove the AC and battery system. Press and hold the power button several times (3 - 5 times) for a 5 secondsReconnect AC account and press the power button - if the system boots normally, stop and insert the battery. does not work.

  Moreover, the machine was purchased in Hong Kong and is still under warranty. However, I am currently in Germany and will stay for another 3 months.

  anyone with any suggestions? Thank you.

  Fixed it by disabling CMOS, wow had

  According to: http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Blank-screen-after-Bios-Upgrade-on-X200/ta-p/29...

• Cannot start Lightroom 6 (standalone) after installation - stuck at the start with scope screen not responding error

  Hi all

  As stated above, I am unable to start Lightroom 6 (standalone) after installation. I am able to launch, but I'm stuck on the boot screen (lightroom logo 6) with bezel does not no error. Would be grateful for any help, thank you very much!

  Just a suite, I use Windows 7 (x 64). I talk with the cat from adobe and I was told to create a new Administrator windows account and reinstall LR by using this new account.

  It worked for me, I am able to successfully access LR 6 using the newly created administrator account. I tried to follow up with another request - I have what patches can implement to my current user account so that I can access LR 6 using that account (and not the new windows user account). Unfortunately, I was told that cat Adobe does not support LR 6 and I am directed to ask my questions here.

  Thanks a lot again!

• New Satellite L50-A-1This starts with black screen

  Hello

  I turned on my brand-new Satellite L50-A-1This for the first yesterday set it up which worked like a charm. Today, as I tried to turn it on for the second time, the screen wouldn't come. Although you can hear the snoring treatment unit and also to see the cursor, the screen remains black.

  Any ideas on what is wrong and how to fix it would be greatly appreciated.

  Thank you, c

  When you start your laptop you see Toshiba welcome screen or it's dark all the time?

  It's really not easy to say what the problem is here. Try please to start and press function F4 or FN + F4 key to ensure that it is not defined for output to an external monitor.

• Satellite C600-258 starts with black screen only

  Hello

  This laptop was working fine this morning but returned to use it at the moment, the screen has no display.

  When the laptop is turned on, fan can be heard, 2 green lights are on but nothing appears on the screen.

  Suggestions, please?

  Thank you

  Two green lights?
  Your laptop is connected to the power supply current?

  Try to remove the battery, leave for a while and test it with power current only.
  Is there activity HDD (HDD flashing led)?