Tecra S11 - 11G - adapter not detected (3G) Mobile Broadband

Similar Questions

• Use of DVI port on Port Replicator II with Tecra S11 - 11G

  Hello together,

  I use a Toshiba Tecra S11 - 11G with port replicator.
  I use an external monitor L1950, it is connectetd with VGA cable.

  Now, I want to use the DVI Port of port replicator, but the monitor did not detect the signal.
  Is it possible to use the DVI connection?

  Kind regards

  Michael

  Hello

  Your Tecra A11 does not support DVI port
  The Replicator replicates the ports available for laptop. But if the mobile phone does not support a certain port, then the port replicator is not able to reproduce such interface so I guess that's the reason why DVI ports could not be detected using port replicator.

  PS: did you install the driver provided with USB 2.0 Port Replicator II package

• Tecra S11 - 11G - external monitor flickers when the Wifi is enabled

  I have a similar problem on my brand new Tecra S11 - 11G. The only difference is that the problem is present only when I have my laptop plugged in and turned on WiFi radio.

  If I turn the Wifi radio off and keep the laptop connected to the power source, the external screen keeps flickering. If I keep the WiFi radio and disconnect it from the power source blinking stops, too.

  I reported this problem to Toshiba customer to the Portugal (where I bought it) and they gave me the ticket case #710008193. They said that they would not replace the defective unit and that I should leave for repair. It is absolutely amazing because the laptop is brand new. A customer still expects to have a well work product when needed out of the box without having to call the repair man. I think it is their obligation to replace the damaged aircraft. In addition, this laptop is part of a fleet of the company who buys only Toshiba laptops and we are talking about a Tecra and not a Satellite. We deserve more respect from Toshiba.

  In a year or two, I have a new laptop (company policy) and it surely won't be a Toshiba.

  > They said they would not replace the defective unit and that I should leave for repair. It is absolutely amazing because the laptop is brand new

  That is why amazing? A hardware malfunction can still happen and this happens not only in the world of the computer/laptop. Therefore, manufacturers provide a service to a client and failure may be fixed and covered by the warranty.

  > A customer still waiting to have a well work product when needed out of the box without having to call the repair man. I think it is their obligation to replace the damaged aircraft

  Of course you are right, but in the reality of things happening.
  My PS3 died after a short period of time. It has been fixed and replaced under warranty conditions, but this isn't a reason for me to say; I would not buy PS3 more because of this problem.
  My BMW had some engine problems, that it was fixed under warranty and I would buy this car again once because this car is great and I think other builders are no better, and I think this would also happen to other manufacturers

  That s my personal opinion in the opinion

  Greetings

• Tecra S11 - WiFi does not work

  Hello

  I have a problem with our new laptops Toshiba Tecra S11 - 11 G PTSE3E WiFi card.

  I have preinstalled a notebook with Win7 Pro x 64, all drivers for toshiba and laptop preconditioned / tools intel.
  Then I have the laptop syspreped, took a picture of her and out of the image on the other laptop Tecra S11.

  Now, I have the same problem on all laptops: the WiFi adapter (Intel Centrino Advanced - N 6200 AGN) is the last driver installed, but it cannot access wireless networks (he can find same).
  The switch for wireless devices is on. FN + F8 also said, that the WiFi is enabled.
  When I try to create an ad hoc wireless network it says "an unexpected error has occurred."

  After right click on "Wireless Network Connection" > 'Diagnostic' Windows encounters a problem.
  He said 'There could be a problem with the driver for the wireless network connection card', but Windows can not solve the problem (surprising wow ;-)).
  I reinstalled the driver several times with no improvement. Update the driver with windows update did not too.

  I installed the following portable tools:

  -AuthenTec Fingerprint Software
  -Intel management engine components
  -TOSHIBA Fingerprint Utility
  -TOSHIBA HDD Protection
  -TOSHIBA Mobile broadband device
  -TOSHIBA Value Added Package
  -TOSHIBA Wireless Manager

  In the Device Manager are no remaining unknown device. In information system under "Components" > "Problem Devices" are no devices listed.

  I have no ideas left how solve the problem...

  What security software you have installed?

  Maybe the software blocking Wifi connections.

  You can run the Toshiba recovery to rule out a software problem.

• Tecra S3 - HDD was not detected during the intallation of win7

  Hello

  I have Tecra S3 PTS30E, serial No. is 17023153 H.

  Now installed windows xp, I want to install Win7, but the HARD drive is not detected during installation. Windows xp works with this HARD drive.

  Why this problem?

  Please help me on this problem.

  Hello

  Tecra S3 supports RAID. Therefore, you need to install the RAID driver
  When installing XP, you will need to press F6 to add the RAID driver.

  Here the driver I found on the page of the European driver Toshiba

  [Driver RAID Tecra S3 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 8 & selFamily = 195 & selSeries = 335 & selProduct = 596 & STAS hortMod = 431 & language = 13 & selOS = 10 & selType = 262 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = 262 & page = 1 & ID = 43966 & OSI D = 10 & driverLanguage = 42]

• Windows 7 Pro x 64 does not detect HP Mobile Data Protection Sensor (accelerometer)

  Hello.

  I installed win7pro x 64 yesterday and already fallen on a serious problem, which is how I use the laptop a little dangerous for my valuable data.

  When I was working on HP Vista 32 bit (of the partition recovery etc.) brand, it was a device called the HP Mobile Data Protection with HP ProtectSmart software sensor (or protect Smart). In other words, the accelerometer HDD which parks the HARD drive heads when it "feels" it is down or something and the software for it. It has worked flawlessly.

  
  

  Until I decided to install Win7... And then, surprisingly, after failure of driver install and take a look in the Device Manager, I have noticed that there is no such device. I checked three times, looked at property of each device, even reinstalled Vista 32bits back - he has shown again - and installed Win7 - not detected again. There is nothing that has the HPQ004 device ID! I remember people saying that after that fresh Windows installed, there are 6 unknown devices or more. I got only 5. [Device fingerprinting, 3 x MemCard player and IR receiver]. There is no accelerometer... Also, when I try to install the drivers/software, windows appears:

  ProtectSmart Hard Drive Protection: with the text Property.AccelerometerNotPresent

  and then another saying something like features were not installed due to wrong installation or not supported feature.

  So now I'm stuck with a laptop it is dangerous to travel with, because the disk is no longer protected

  I have already installed all the drivers available on the HP page, even downloaded those newer Intel (chipset) etc.

  Is there a solution to this? Has anyone else encountered this problem?

  Windows 7 is officially released and available in RTM version, not beta, so I think that HP should open support in his favor and release new drivers for win7! And above all, to solve this problem...

  If anyone is interested, this problem is solved now.

  Just download the new drivers from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 3744188 & swItem = ob-76187-1 & mode = 4 & idx = 2, install and make sure you have the latest version of the BIOS. Tested - heads are being finally parked! Yay!

• Re: Tecra S11 - TEMPRO warns not me on the new drivers

  New drivers and BIOS are available for my Tecra S11 but TEMPRO warns not me.
  Why?

  What drivers do you mean exactly?
  It seems that only the battery Bluetooth, Wlan driver and pilot 3G are downloaded in 2012.
  But these drivers are not released, especially for Tecra S11 but for all laptops which are equipped with such devices so maybe that's the reason why you have not received notifications

  But to be honest, I wouldn't change anything on my system if the system is working properly I always follow the advice: + never change a running system.

• Tecra S1 - Bios does not detect HARD drive

  Hi, first time poster, long drive date.

  I have a friends laptop with me an old S1, its hard drive has failed. (Even tried it on my USB adapter to diagnose).

  I had another IDE HDD which works like a dream.
  I can even install Windows up to a point with the exception of when the computer wants to do the first restart of the second phase of the installation. (Not on CD).

  In the bios the HARD drive is not detected a 0 MB for the read command.
  I tested the USB HARD drive. So works perfectly. will try another hard drive there tomorrow see what is happening.

  I tried the recovery CD aswell. But she also can not detect the hard drive.
  Finally, I even reflashed the Bios even if it was the last version 2.50.
  Still did not change.

  If I'm just at a loss here. Tomorrow I'll do the following.

  Try a 3rd HDD IDE into the machine.

  Opening of the case and see if I can find the CMOS battery to replace or remove for a minute or 2 to see what is happening.
  Is obviously a problem of bios of the HARD drive is detected. Has anyone ever encountered this before?

  Windows / ERD Commander / Partition Magic 8 all finding the end hard drive.
  Thanks for listening to my dribble that I feel like I'm banging my head against a wall being close.

  Kind regards

  Dave

  What drive did you use and what size it it?
  I think that not all HARD drive would be compatible because of the 28-bit LBA.

  The 28-bit LBA supports hard disks up to 128GB and if the IDE controller supports only 28-bit LBA then it may happen that more large drives would not be recognized by the BIOS.

• X 230 Bluetooth adapter not detected on Windows 10

  I recently had the X 230 device I use put to level 10 Windows to a new facility (does not pass Lenovo restore feature). Since then, I noticed that I am no longer able to activate or to detect the bluetooth adapter after the upgrade. I tried to download the drivers, but also for Windows 10 but still power management software could activate / not detect. Things I noticed:

  1. There is no mention of a bluetooth Device Manager device (or as a category of bluetooth, nor as a network adapter.
  2. Performing with Fn + F5 does not work as it is the switch of the machine in airplane mode. Press them will take the machine off of airplane mode. (I also installed the hotkey software).

  I used to be able to manage wifi and bluetooth devices using wireless Lenovo return assistance when I was still with Windows 7 if the material is "absolutely" there.

  Thoughts? Thanks in advance for the help!

  OK, so I was able to solve my problem of bluetooth in upgradinv the BIOS/UEFI with the latest firmware. After a reboot, voila! The bluetooth device has been detected. Now, the interesting thing is that there is no option to turn off the radio, unless disable you it in Device Manager.

• Lumia 620 not detected as mobile phone in windows 8.

  Anyone would be able to help me with this question, I'll have. Windows 8 is having a problem recognizing my Lumia 620 as a mobile phone. There he falls into a group not specified as RM846/Nokia Lumiaa 620. That's why I can't use the app windows phone... also. All solutions would be very appreciated. I can't even use the file Explorer to see the files on the phone.

  Hi Mark,

  I suggest to refer to the link below and follow the instructions.

  Windows Phone 8 is not detected by your computer

  http://support.Microsoft.com/kb/2749484

  It will be useful, if you have any additional questions, feel free to post. We will be happy to help you.

• Adapter not detected network - need help ASAP

  I want to install ESXI 5.5.0 on a HP HPE-170 t for test purposes and for a reason that the network adapters are not detected... I tried both ESXI 5.5 base ISO, then the custom for ESXI 5.5 HP image and both do not detect network cards.

  I need this resolved as soon as possible.

  Ideas or recommendations or solutions possible?

  Evening,

  There is no easy way to solve this problem since the HPE-170 t is not on the HCL.  I think you have two options:

  1. install a NETWORK adapter that is on the HCL and install 5.5

  2. write / find a driver for your network card and install it in a customized image of ESXi.  Then install ESXi

  Sorry that I have not better new... you can also run Vmware workstation on this machine and run ESXi as a virtual machine... that's my way around the HCL.

  Thank you

  J

• Tecra S11 - 11G - Linux installation

  Hello

  I got a Tecra S11 11 G and I want to install Linux Mint on it.
  During installation, I get the error that 'acpi CCP probe failed.
  I googled for the last hour and I discovered that it can be connected to the uefi boot mode.
  But my laptop has uefi?
  Does anyone know what I can do to fix this?

  Thank you
  Theboda

  You can run Linux Mint live view? If so, start Linux Mint in direct mode and run GParted. In the GParted menu bar, click view , and then click device information. If the partition table is reported as TPG, the hard disk is partitioned probably for UEFI. Another control, you can do is to search a tagged partition ESP. An ESP partition indicates also that UEFI is in use.

• Tecra Z50 - A can't see the mobile broadband network

  8.1 Windows does not recognize the Sierra LTE mobile braodband on my Tecra Z50.-a.
  There is no software on the Toshiba support site. Observer of Sierra drivers or AirCard.

  He can't see the material in my equipment manager.
  Can't see the mobile broadband in the network domain.

  Need help!

  Thx a lot

  Can you please send full model of your laptop Tecra name?
  By the way: do you use the original pre-installed OS that you got with your laptop?

• Tecra A10 - 15 c PTSB1E - no modem Mobile Broadband

  I'm looking for help with my problem of internal modem using Wireless Manager 5 (5.2.1047.69).
  I had a problem a week a go that the operating system (Windows XP) has been altered.

  In the meantime, I could not open Wireless Manager 5 (with a message that "no modem Mobile Broadband" and there are other programs that have been affected.) A recovery process was undertaken which included deletion of all programs and re - install.

  The modem worked for a week and I now have the same "No Mobile Broadband Modem" message again.
  I used the modem dongle external vodafone which work currently, but here the restoration of my internal modem.

  Can someone help, please?

  Is the Wireless Manager 5 Toshiba application? I don't think so.
  So if you have problems to use non-Toshiba applications contact producer software and support.

  One more thing: all of the time that you write on the modem internal. What type of modem is?
  As far as I know for its use if internal laptop modem you don't need one Director or another piece of software.

  To be honest, I feel the whole issue has nothing to do with Toshiba.
  Have I misunderstood something?

• HP Elitebook 8460p Note Book P: Mobile Broadband not found my sim on windows 10 signal

  Hi everyone how are you, I hope everything's going, brother am so an advance of the user, but I have a problem finally ago one day, when I try to install Windows on my PC HP Elitebook 8460p Note Book Pc 10 and this work will be perfect, but when I try to use my system imbaded HP un2420 Module device Mobile Broadband installed the driver of this pilot "Sierra Wireless HP un2420 Mobile Broadband Module «Driver package version 3.5.1308.3911»» after reboot and insert my sim cell on the divce, can he take my divce easily, but when I try to connect internet then the signal problem occoure, singnal not shown, looking for Singal but device and sim job will be after all when I reistalled windows 8.1 Pro then work perfect internet operation of signal and the connection will be, so if you have any solution to solve the singal problem on windows 10 then share with me thank you Once again

  Isaac Javed of Pakistan

  You, like the rest of us, will have to wait Windows 10 becomes a release for the manufacture of operating system.

  It is currently only a technical preview and has no support any manufacturer. When he was released, manufacturers will respond and we will know what hardware devices will be supported.

  You can always try to install the ADSL of Sierra Wireless HP un2420 Mobile "Driver package version 3.5.1308.3911" in compatibility mode.