Tecra S11 with BIOS 3.50 - USB mouse is not recognized at startup
Hello
I installed the latest version of the BIOS in my TECRA S11 - U10, and now my "HID" device does not-that is to say my dongled USB wireless mouse. I must now remove the dongle and re - insert before the TECRA sees the mouse.
Boring, just about usable, but it's a PITA and I'm aware of always 'making/breaking' the USB connection.
Must be something to do with the BIOS and see devices HID on "start"?
Finally, I enabled Legacy USB in the BIOS device support, but still no joy. In addition, have tested the mouse on other laptops - works well at the start, so NOT the mouse.
Suggestions, people? Thank you...
Hello
Disconnect your USB mouse and go to Device Manager.
Remove all USB hubs and USB controllers in Device Manager list.
Reboot the laptop.
Wait until all the USB ports have recognised and installed again.
Then connect the USB mouse and check how it works.
You should also test different USB ports available on this laptop.
Tags: Toshiba
Similar Questions
-
My sweex usb mouse is not recognized how can I fix?
My pc 64 bit Windows 7 does not recognize not my mouse "Sweex. It seems to work on 32-bit PCs. I tried on 3 different Windows 7 64 bit pc and it ' still, is not recognized. I went through all the events, troubleshooting ' but I still have this problem. Any help and advice for this problem would be greatly appreciated.
Best regards, Robert McLoughlinHi Robert,.
· What is the Sweex mouse model?
· You get the error message?
You must install the 64-bit Sweex mouse drivers in order to correctly based on the mouse Windows 7 64-bit operating system. Given that you have checked with other Windows 7 64-bit operating system, there seems to be problem with the mouse drivers. That's why I suggest you to contact the mouse manufacturer support and check to see the availability of 64-bit drivers.
http://www.Sweex.com/en/assortiment/input/optical-mice/
http://www.Sweex.com/en/service-support/
Also refer to this link: http://windows.microsoft.com/en-in/windows7/32-bit-and-64-bit-windows-frequently-asked-questions
It may be useful, if you have other questions about Windows operating systems, post them on this forum.
-
Cannot change the brightness on Toshiba Tecra S11 with Win7 using the FN keys
I can't change the brightness on Toshiba Tecra S11 with Win7 using the FN keys (disable audio and other work fine) when logged in as a normal user.
Shortcuts keyboard console appears and pressing F6 or F7, the brightness is always set to level 1 (no matter how luminous monitor is really) and cannot be changed.
I can change it via power or Administrator Options.Hello
Maybe you didn't install VAP (value added package) for all user accounts.
Please reinstall VAP by using your user account.You can also check if the user account is the Admin right supported.
You can run simple applications (exe) as an administrator.
For this, he must right click on exe file (value package) and should choose + Run as administrator. +Check it!
-
Satellite L300 - Vista - Touchpad and USB mouse does not.
Hello
Well well after hours of trying allsorts, I post here...
Been given the laptop for repair as the touchpad no longer. No problem "I thought", simply plug a mouse usb to help me get around and re - install the touchpad... what a joke.
On the right, the USB mouse is recognized as a hid device and work, according to the Manager of devices, but not when you move it... nothing...
The Touchpad is listed as a Synaptics ps/2 touchpad and signals a Code 10 in section mouse device as well as listed as a hid and fully functional usb mouse Manager.Right... I have...
Listed all devices, even the hidden nonpresent (devmgr_show_nonpresent_devices) and removed everything only account of any mouse, keyboards, etc...
uninstalled the software synaptics via the program Panel.
Restarted the laptop, and it starts with the touchpad is ranked again code 10 with the version of windows drivers.
Drivers up to date using two different files of Toshiba for the touchpad, still Code 10
Still, the USB mouse does not either.Someone enlighten me please on a fix for this...
Hello
Really strange what s my friend because normally a touchpad driver update should solve the problem.
In any case, have you ever tried to use the Toshiba Recovery disk? Maybe it s just a software problem and a few important Windows files are destroyed or don t work properly. Reinstall Windows using the recovery disk Toshiba takes only a few minutes and there are already all the drivers and tools integrated. With these parameters (factory settings), the touchpad should work properly, and if not the touchpad or the motherboard needs to be replaced maybe.
Good bye
-
Satellite A100-062 - USB mouse does not work
Hello
I have a Satellite A100-062.
I've never been able to get a USB mouse to work with her.
The OS is Vista Home Premium, whenever I have plug in a USB mouse, the operating system detects a device has been connected to the USB port, but eventually the message material has not installed successfully.So I have to rely on the touchpad, the problem seems to be limited to mice only, I've successfully used a USB webcam without incident.
I tried several USB mouse with the machine exclude a problem with my original mouse.Has anyone else had similar problems?
Thank you
> So I have to rely on the touchpad, the problem seems to be limited to the mouse only, I have successfully used a USB webcam without incident.
Looks like a problem with the USB mouse and not with the laptop or with USB ports
I would recommend testing different mouse and using the other. -
Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?
Would you like to share why you must do a clean install?
You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.
Computers that can be upgraded to use OS X Internet Recovery - Apple Support
PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.
-
My USB devices are not recognized, but they have a power
My USB devices are not recognized, the only ones to be recognized are my mouse and keyboard. Each device is powered (motherboard works fine), but Windows 7 isn't their read (although sometimes I'll get a code 43). I have the latest chipset.
I tried right click and uninstall each device and rebooted the computer. Nothing has fixed this.
My external hard drive, ipod and other devices that involve the transfer of data seem to ONLY get power and nothing else.
It is not material because all my devices work on my laptop. Also my motherboard works fine (it's the 2nd RMA) and it has been tested at the factory to make sure of him.
I would really appreciate help with this
Hello
Please follow the methods.
Method 1:
Run the troubleshooter from the link.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
Try to uninstall and reinstall the USB controllers
a. click the Start button.
b in the start search box, type devmgmt.msc and press enter
c. expand Bus USB controllers
d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.
e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
I would also ask you to contact the manufacturer of the computer to help.
-
My usb ports are not recognized usb storage damage
Original title: why is my labtop port shows usb not recognized by vista home basic even though it shows a device installed and ready to use software?
My usb ports are not recognized usb storage damage
Hello
· Do you think any yellow exclamation point inDevice Manager under USB devices?
Windows vista contains several troubleshooting programs can automatically fix some common problems with your computer. One of them is the hardware and peripheral troubleshooting tool. I suggest you to run the troubleshooter as the first step in troubleshooting.
Method 1:
Tips for solving problems of USB devices
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
Method 2: Remove and reinstall USB controllers
a. Click Start; in the start search type devmgmt.msc and press ENTER.
b. expand Bus USB controllers.
c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
d. restart the computer, and then Windows will reinstall the USB controllers.
e. plug the removable USB storage device and test to make sure that
-
K135 move v0.35 on v0.37 is not possible because USB or MicroSD not recognized
My problem is described in the topic:
K135 move v0.35 on v0.37 is not possible because USB or MicroSD not recognized?
I read the instructions in the PDF and the user manual.
Can someone help me?
I solved my problem, I change the k135 by another k135, mass memory connectors are damaged.
-
Vista - usb ports are not recognized unknown device
Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.
Hello
Thank you for using the Microsoft Windows Vista Forums.
Follow the instructions below that may help you resolve the issue.
Method 1:
Try to connect USB devices to a different USB port and check if you are able to access.
Method 2:
Click on the link below to run Fix it which will help you to solve the problem.
Tips for solving problems of USB devices
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx
Click on the link below and install the update.
Rollup cumulative update for USB in Windows Vista Basic components
http://support.Microsoft.com/kb/941600
Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.
Method 3:
Let us try to disable the Antivirus security software and check the number.
Re-enable the security software after checking the issue.
You can also try disabling the firewall and check the issue.
Re-enable the firewall after checking the issue.
Method 4:
A clean boot helps eliminate software conflicts. Let us check if software is causing the problem by following the clean boot procedure.
To perform the clean boot procedure, follow the instructions in the link below.
Step 1: Perform a clean boot
Step 2: Enable half the services
Step 3: Determine whether the problem returns
Step 4: Enable half of the startup items
Step 5: Determine whether the problem returnsStep 6: Resolve the problem
Step 7: Reset the computer to start as usual
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
After checking the problem, turn the computer back to the Normal mode.
Uninstall or update the program that is causing the problem.
Check whether the problem is resolved.
You can also check out the link below.
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
I am trying to connect to Simple external storage drive and once I followed all the steps (only 2) Windows XP gave me a message that the USB device is not recognized or it malfunctioned. I disconnected everything and tried again in another USB port and still had the same error. I know that is not the usb port of my computer because I have it plugged into a port that just worked. I have Windowx XP SP2. Any help on this would be appreciated.
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
I need to talk with a person. My ISP is not recognized by email Thunderbird
I need to talk with a person. My ISP is not recognized by Thunderbird. In addition, Thunderbird does not recognize the IMAP server that my ISP insists.
I need to talk with a person.
This forum is the official place to support Thunderbird. There is no phone for Thunderbird support.
My ISP is not recognized by Thunderbird.
If the new account wizard is unable to detect the right settings for your email provider to run "Manual Configuration". https://support.Mozilla.org/KB/manual-account-configuration
Note, prior to that, you will need to get the server required your email provider settings.
Thunderbird does not recognize the IMAP server that my ISP insists.
You will need to tell Thunderbird to use the IMAP protocol for incoming server when you set up the account manually.
-
Tecra S11 and BIOS update 2.20
Hello
I was wondering what is fixed in the new BIOS. Toshiba disclose no information about changes in the updates (why? "It is really a strange thing to do).
Anyone know what it does? This is the third update already and still nothing.
Hello
It seems that these changes to the BIOS information are not available on the European driver Toshiba page.
I found some details on improvements and updates to the BIOS on the page of the Toshiba U.S. pilot but Tecra S11 is not listed. Maybe because it was broadcast only in the United States.You could get in touch with a local ASP in order to obtain some information about the changes in the BIOS. Maybe the guys could provide some information then you could share with us
-
There is no connection to access the bios with a standard PS/2 keyboard and the USB driver does not load in time to access the bios with a combination of keys on the keyboard. I need to check the version of the BIOS and check the settings of hardware for my readers who are accessible via the BIOS. If I can't enter the appropriate key, how to enter the BIOS? Seems to be a common problem, since I see issues with some answers all over the internet. I even looked for a possible 'hidden' ps/2 connection in the case, but not joy.
Have you tried another kbd? I recently saw a poster that is having this problem, & an another usb kbd did the trick for him. FWIW, I have a usb keyboard and mouse, and mine is trying to get into the BIOS.
-
The USB mouse not is won't boot on initialize top when used through Dynadock on Satellite Pro U200. If the mouse is reinstalled on the Dynadock it works fine. I use a Kensington Valuoptical USB mouse. I tried the alternative kensington mouse and had the same problem. Can someone tell how to fix this?
Hi Jeremy
Unfortunately I don't have a solution to your problem, but it can also be a technical limitation. I'm also interesting to buy this docking station and I would like to know if there is the same problem with memory external HDD or USB sticks.
Maybe you are looking for
-
Cannot install Sierra because updating Photos at a standstill
Apparently, the new Sierra OS included an update of Photos. Started Photos updated first, it worked for ~ 30hours 'building a library '. Tried to complete installation of Sierra, which requires a reboot - of course all Apps must close to restart, p
-
The header at the top of the page disappeared, bookmarks are on the opposite side of the page, I can't exit and save the tabs that I used, I am generally happy with this update. I loved all the previous versions of firefox, but this one is not good.
-
Satellite U500 - 1 6 (PSU9ME) - annoying fan turn on / off constantly
Hello Two days ago, I bought a brand new U500 - 1 6. One thing that is annoying, the system fan. Especially when sitting in a library, as students do sometimes... System information:CPU: intel core i5 430M - 2, 26-2, 53 GHzGPU: Geforce 310MOS: Window
-
What BIOS I need a model of Satellite M40 PSM40E with ATI Radeon and Intel Chipset graphics card?Thank you
-
Satellite P300-1GK cannot find the display driver for ATI Radeon HD 4650 Win XP
Hello I can't find the driver for my ATI Radeon mobility HD 4650. There is an error on the toshiba Web site download page.My laptop is a P300-1GK (PSPCCE). The drivers are for the 3650 etc... not for the 4650. Where can I find the right idea? ATI Mob