Tecra A11 - 11 L - fan still working

Similar Questions

• Tecra S3-130: why fan still working

  Hello

  The fan is too loud on my laptop Tecra S3-130, because it doesn't always work, never stops. I tried the settings in the properties "Toshiba Power Saver", but after changing anything that the fan starts working again in a few seconds, despite the ACPI temperature is 46 degrees Celsius only, not much higher. This fan of work is always very disturbing.

  Thanks for any advice in advance.

  Kazi

  Hello

  The temperature is 46 degrees Celsius, only because the fan works properly. If the fan doesn't run the temperature climbs. I put t know how you use your device, but if you are working with programs of high performance fans should run because of high utilization of the processor and overheating problems. In addition if cooling method is set for maximum Performance the cooling fans work up.

• My computer will not sleep, the display shuts off for a while but the fan still works and the keyboard lights stay on, and then eventually he dies just

  Imen quite so much as the title, when I try to put my computer to sleep the screen turns off but the computer is still running. My computer is a HP pavilion dv6 is a little more than 3 years. He used to do whenever a while, but now it's every time I try to pause. I'll close the top cover, but the fan still works, the hp on the lid logo light remains lit, and if I reopen it cover the power light is always on and the lights on the keyboard caps lock and wireless keys. The same actions occur when I try to put it to sleep manually (from the start menu). It does not at all I have to do another that now hold power, but even when I do nothing, it will stay here like this for awhile and then just turn off completely.

  When it starts up, it gives me the options to start in safe mode or start normally, and when I am connected and it gives me the "windows has recovered from an unexpected shutdown", I see that there is a minidump file in windows that has something to do with it. I tried to search for the file and the problem together, and then each separately, but nothing I've seen described really my problem, so I thought I should just ask on my problem.

  I read what made other people, changing advanced power settings, changing the media settings, etc. and did those things, but to no avail. It's not a huge deal, because I can just turn off my computer whenever I'm done with it for now, but I don't know if it's a bad omen for the future of my poor computer. So if someone could give me a hand with this point in mind, I'd be very happy. Let me know if provide more details (OS, processor, my favorite color, social security number, etc.) that would make it easier to solve. Thank you
  Also, either by the way, if this is in the wrong forum topic, please let me know.

  If you use a wireless keyboard or mouse to your computer, these items can keep your computer enter standby mode automatically because they constantly send a signal to the system, thus preventing downtime. An optical mouse (that changes color) causing a similar problem.

  • 1

    Click "Start," "Control Panel", "'material and his ' and 'Device Manager'."

  • 2

    Double-click "Network adapters", then right-click on your network device. Click 'properties '.

  • Sponsored links

    • Analysis software of CAN

      Economic and powerful CAN bus analysis and diagnostic software.

  www.CANCapture.com

• 3

  Click on the "Advanced" tab and scroll down the list of 'Property' to find all entries beginning with "Wake up" or "Wake up" in the entry. Click once on these entries and in the drop down box at the top right make sure it says 'None' or 'off '.

• 4

  Click the "Power Management" tab at the top and make sure that the "allow this device to wake up the computer"is not checked. " Click on 'OK '.

Mouse

• 5

  Open Device Manager, as above, and then double-click "Mouse" or 'mice and other pointing devices' right click of your mouse, and click 'properties '.

• 6

  Click the "Power management" tab and make sure that the "allow this device to wake the computer" is disabled.

• Toshiba Libretto W100 is hot and fan still works

  Hello

  my new Toshiba libretto W100 is still very hot and the fan is still running.
  Even with programs that use few resources.
  If I use programs like Trackmania or Fifa 11, the temperature rises again, and the fan works very quickly and loudly.

  Is this normal? reduce the temperature and noise?
  Thank you. Best regards.

  Hello

  I think you use high hard who insist a lot on the CPU.
  This causes higher heat dissipation and therefore the temperature drops to a higher level and this is why cooling modules run faster.

  So in my opinion, everything is ok here; It s nothing unusual in the world of computing. the warm air must be removed, and so the fans run at a higher speed.

  I think that the fans don't run faster if you use low performance applications. Right?

• Cooling fan still works with an average speed on the Satellite A100-405

  Hello guys,.

  If anyone can give me a reason why my satellite cooling fan is always running at speed average. I shot all the "Toshiba Power Saver Properties" settings, to "Battery Optimized" condition and so I took the battery, and the pleasure of cooling is still running and operating at average speed. I'm in a place of model (18 Aºc) without any direct exposure to the Sun or heat.

  If you can help me about whether or not it is a normal condition. I think that it is not normal to have fun all the time for work. Runs normally for 2 minutes and stops during a similar period (used to be the case in other phones that I had in the past).

  Maybe, I need to set or check adjustments internally or in the Bios. I really don't know and I'm really worried about it.

  Thanks guys... Please respond.

  Laptop cooling depends on the use of laptops and the applications that run on the laptop.
  Strong performance of the software is running on the laptop each part as CPU and GPU produce a lot of heat.
  Have you tried to use a material like Speedfan monitoring tool.
  SpeedFan is a freeware program that monitors voltages, fan speeds and temperatures in computers with hardware monitor chips

  But back to the energy saver. In the eve of power configuration, you should try to the CPU for auto control method and try to change the processor, the speed of processing and cooling method.

  Don't forget that there is enough free space around the laptop. It is important for the circulation of fresh air.

• Tecra A9 - after CPU fan upgrade works constantly at full power

  Hi all

  I have 3 Tecra A9 notebook that came with a Core2Duo T7100 clocked at 1.8 Ghz with 2 MB of Cache. Updated every 3 to a T7700 clocked at 2.4 Ghz with 4 MB of Cache. According to Intel, these two processors TDP is 35W. Books don't get really hot and not hot. The CPU FAN starts right full power after the display of the BIOS with the Toshiba Logo screen. Under Bios Version 2.1 on all 3 systems, having the same behavior on all 3 systems. CPU properly recognized under Windows XP, Win7, and Win10. Is it possible to get the adjusted to normal CPU fan? The system isn t is hotter than upgrading the CPU, just for some reason any BIOS has now decided the fan must operate at full power. I even traded one of the CPU Fans with that of a Tecra A10 notebook but had the same effect as with the original fan. Having no idea what I could do. I hope for your help!

  Best regards
  Bornchiller

  I think that needs calibration to be performed to configure the table of fan speed.
  Toshiba Service Center to do this.

• Satellite L655-1HC: win 8.1 Fan still work and / is not closed

  Hello everyone,

  I have laptop L655-1HC owner, part no: PSK1JE-0GT00XAR, where am facing 2 problems I couldn't solve until now.
  First of all, the fan continues to work always and stops any bothers me really.

  Second, when closing, windows turns off but the machine continues to work with the fan and never stops unless I stopped it with the key switch seconds, even when I close the lid, windows turns off but the machine continues to work with the fan, at the opening of the lid it is freezing just until I stopped it manually through the switch.

  Before two or three days windows crashed down and I formatted the laptop and upgraded to windows pro 8.1 and since updated, I was faced with these issues.

  Hello

  I think that the problem is related to the system Windows 8.1
  Probably it of not known you 8 Win and Win 8.1 does not power the unit off by default. The laptop will be defined in hybrid close mode that allows you to boot up the laptop faster.

  I guess this could be the reason for your problem and recommend that you deactivate this mode.
  Please check this document Toshiba how to do this:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  Your comments would be appreciated

• Satellite A30 - fan still working

  Hello

  My Satellite A33 (although the case said A30 my model number indicates otherwise), there are problems of overheating for some time now, the fan always runs at full speed. I'll have to raise the notebook so that the fan can get more air.

  I'm not sure why this happens, is just needed a clean place (never did)?

  I looks as if it has two fans, and it does not blow out as much air as the other or not at all. I don't know much because I moved new laptops, but I use it when traveling.

  Can you help?

  Thank you.

  Hello
  You say you ' never played cleaning and this may be the reason for overheating (clogged cooling module). So, do the following:

  1. clean your computer with air well. If it does not help and your computer is out of warranty you can take it apart. Check then if it has 2 fans (I dunno if this model comes with 2 fans if it has 2 fans and them does not work replace it at all).
  If you decide to dismount, step this www.irisvista.com link to remove the statement

  Welcome them

• Fan still works after stop (10 of Windows).

  Hello

  I installed 10 windows in my Inspiron 15 3542.
  When I shut down the computer, sometimes the fan continues to run until the battery runs out.

  So I continue to press on button / shut down and turn off the power to the laptop.

  Previously, I had Windows 8.1 and no problem at all.

  Any guy healpful ideas?

  This seems to be a common problem with Windows 10. The culprit is Intel Management Engine (IME) v11.* Since v10.* This has been a problem. What you need to do is to install a V9 or V10 IME and the system will work as it should which relates to the power off, the sleep and hibernation. I had the same problem and pilot declined to v10 and everything has been fine since. 2 weeks and no problems.

  If you can't find the drivers on the site of Dell back, get the driver Intel ME here. Simply use the driver installation and answer that you know you are going back on the driver level.

• Tecra A11 - FN keys do not work in Win 7 64 bit running

  Small problem, reloaded Win 7 64 bit, now there is a problem with my FN keys work does not,

  Please help, no cd not supplied with laptop

  I assume that you have installed the Win7 clean version, right?
  You must install additional package from Toshiba. This package contains several tools and one of them is flash cards. Also install flash cards support utility if this tool is available on the Toshiba download page.

• Qosmio F60 - fan still working

  Is this normal? I have another laptop and the fan is quiet...
  Any suggestions?

  I read that the BIOS upgrade does nothing good...
  There will be a new version of the BIOS?

  > Is this normal?

  No, this is not normal. Perhaps, your laptop is overheating due to dust. First of all, clean it up:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=40

  > There will be a new version of the BIOS?

  in this forum, no one can tell you when it will be released. You can always check on the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
  Also, try to update chipset driver utility anddisplay

  Post edited by: Jeka -?

• Tecra A11 PTSEOU: Some keyboard keys not working not

  Hello

  In my Toshiba Tecra A11 PTSEOU - 08904L model, some of the keys on keyboard did not, initially, key 6 did not work. But now about 12 keys did not work.

  When I press one of these keys, I hear a single beep and nothing happens.
  Even I can't see the bios menu when you start the computer as "press f2 for boot menu".

  Is there something to do with the bios for this problem?
  I tried updating the bios, but the installation failed saying incompatible bios. Help, please

  Thank you
  Thawfeek.

  > Is there something to do with the bios for this problem?
  BIOS? Why ORGANIC?
  I assume that the problem of its equipment and you will have to replace the internal keyboard.

  Just to confirm the problem with keyboard: you can connect external USB keyboard.
  In case the external keyboard would work correctly, the problem is related to the internal keyboard.

• Tecra A11 - 125 - deactivation of the rotation of the screen shortcuts do not work

  Dear users of the forum,

  I recently bought my new Tecra A11-125 online and so far I really like it!

  BUT: I work with a translation software where I need the shortcut Ctrl + Alt + arrow down quite often. This shortcut has been configured as an aid to turn the screen tilted up.

  I disabled the shortcuts under graphics properties (right click Desktop > graphics properties > shortcuts > disable). It worked fine the first day.
  The next day, I started the laptop and: the screen keeps turning up-side-down. I checked the settings and shortcuts are always disabled. Nothing seems to have changed... but I can't solve my problem... Strange, isn't it?

  Is it possible to disable these shortcuts?

  Thank you

  Lvho

  PS. I use Windows 7.

  Hmmm maybe you need to reinstall the graphics driver again
  The mentioned shortcut is a part of the software/driver for graphics card. It s not a feature of the Windows operating system. This is why I recommend to uninstall the driver for the graphics card first, and then after reboot again and cleaning of registry (using CCleaner) you could install the driver of graphics again.

  Welcome them

• Tecra A11 speed on the fan at 100% all the time

  Hi, one of my colleagues has a new notebook Tecra A11. I've recently updated the bios to version 2.60 and since then the fan is constantly at full speed. Before the update it would be noticeable when the laptop has been widely used, but would slow down when idle. Anyone else seen/had this problem? I wouldn't mind flashing back to the old bios but can not see available on the web site of tosh.

  Thank you

  Hello

  In your case, I recommend setting the BIOS to the default value.
  You can do it in the BIOS. Insofar as I'm sure you could get press F9 default.
  But the option is mentioned in BIOS to verify this.

  In addition, I recommend changing the CPU and cooling module in Windows Power Options.

  This should help to reduce the speed of the cooling fan.

• Re: Tecra A11 Win7 function F6 + F7 keys don't work

  Hello

  I installed Win7 manually on a Tecra A11. I also installed all necessary drivers and "Value Pack". Before I installed th AVP no function button has worked, even the top status bar does not appear. When I installed it, all the keys work fine and also the status bar is displayed by pressing, the fn key. All keys except the keys to adjust the brightness of the display. A restart does not help... Do I need an another utilitiy?

  Thanks for help

  TOB

  Hello

  Please check in the BIOS if the boot mode is not the quick value!
  If it s quick value and then set it back to normal mode.

  Please check this!