Tecra S5 Vista Business SP1 - Tempro crashes instantly

Similar Questions

• Default Microsoft on Vista Business SP1 games

  I have the Visa Business SP1 software on my laptop.
  In my view, that the games feature is not enabled by default. I tried to put using start-> Control Panel-> programs-> Turn Windows features On or Off...

  I tried several times but each time I get an error "an error has occurred. Not all features are enabled. "leading finally no intalltion games.

  Can someone tell me please how install/activate the default games provided with Vista.

  Hi techdancer,

  Generally, this type of program should be set by step you did.
  I suggest you to run a check of system files on the computer.
  Please follow the steps below to the auditor of the filesystem as the first steps:
  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.
  Note: The scan may take a while, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.

  Also check the availability of games to the following location:
  C:\Program Files\Microsoft Games
  C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Games

  Let us know if cela heps.

  Thank you and best regards,
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Business 32 bit crash version after the addition of mor to 2 GB RAM

  I am running Vista, up to this point, that I was able to make it work for me, and when I couldn't run my GIS software in Vista I used VistaBoot Pro and started in XP. I was with 2 GB of RAM and I tried to add more 2 GB and when I booted into Vista it cling to the bars of the screen with the green movement and would not go further. I can boot XP using any combination of 4 GB of memory, even if XP does recognize that 3.24 GB. So, why does Vista Business 32 bit version not starting?

  Hi Mikelmac,

  The option is disabled if the operating system installed on your computer is greater than the version available on DVD, and on the bottom of the screen even, you will find a message indicating the reason for the same.

  If your DVD is vista SP1 and Vista SP2 installed you will not be able to perform an inplace upgrade.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DW CS3 does not work on Vista Business

  Hi, I have Vista Business SP1 on a laptop Acer 5720, all bang up to date and installed DW CS3. DW refuses to open - it allows you to 'initializing files' on startup and then crashes. Have reinstalled nothing doesn't.

  Try this link-

  http://tinyurl.com/5ve6vx

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  'Mr. bump 73' wrote in message
  News:gh9iun$HLT$1@forums. Macromedia.com...
  > Hi Murray, thanks for the reply. For some reason, it won't let me discovers that
  > forum
  > (maybe it was for the people of beta only?) -It just says: "you have not.
  "> permission"-any chance you can cut and paste relevant bits here?
  >
  > Your,.
  >
  > Olly.
  >

• Dial-up networking cannot connect Vista Business

  Hello

  I'm unable to connect to a switch with Vista Business SP1 network, from a laptop computer HP6910p.

  Summary of the problem:

  • I create the dial-up networking connection via "connect to".
  • I select Connect to dial up, go into the details of authentication etc and click OK
  • The DUN system displays a bar of status with «Modems connection...» »
  • The DUN system never gets beyond that point. The modem never made up, and eventually it times out.
  • If I choose the "repair" option, Vista reports that there is no problem with dial-up networking

  Attempted fixes:

  I tried just about everything short of reinstalling Vista (not an option unfortunately), so why I post here

  • Have uninstalled and reinstalled the modem several times.  The modem is listed in the Device Manager and reacts appropriately when he is questioned
  • HP have replaced the modem
  • Have uninstalled all the programs I thought could potentially cause some kind of conflict with DUN, including Nokia PC Suite (install phone as a BT modem), Cisco VPN client.
  • You disable the "wait tone before dialing."
  • Have you tried to tone and pulse dialing
  • Have you tried several lines in different locations, after checking that they have worked with another computer

  Here's the most important thing, though:

  • I extracted xp hyperterminal and running towards him to diagnose the hardware problem.
  • HyperTerminal is able to deal with success a connection!
  • When I tested it with hyperterminal works as expected - create the connection, entry number, dial. The modem comes on, I hear it dial and the call connects.
    • That's why I'm leads that the problem is with vista not the hardware.
    • Could there be a problem with how to Vista DUN trying to drive the modem?

  In my many searches on the web for a solution, I found another person who seems to have a similar problem, but unfortunately no one responded to their question.

  Help, please!

  Thank you

  G.

  I have answered my own question, after days trying to solve it on and outside.

  Somehow 'calls routed through the operator or manual numbering' had been enabled for dial-up.

  To turn it off,

  1. Open "network connections

  2. Select the dial-up connection, press the ALT key and click on the Advanced menu, and then click operator-assisted dialing. (If the assisted dialing is enabled, with assistance of the operator dialing on the Advanced menu is selected.)

  I hope this helps someone else in the future!

  G.

• VI on Vista Business 32-bit client

  Hi all

  My apologies if this has been answered, but I searched and could not find an answer, I installed ESXi on a server. I am now trying to install the vi 2.5 on my laptop Vista business customer, it crashes just in calculating space needs, I tried to run in compatibility mode, but always the same, someone at - it it works. I also turned off UAC for installation will be run as an administrator.

  It's my first glance at vmware so I just want to put in place so that I can look around and familiarize myself with it

  Please help someone

  Tom

  I have it running on both 32-bit and Vista 64 platforms.  UAC is disabled in both and works as an administrator.  Make sure that you have the IP address of the server ESXi host and try again to download the client again via Internet Explorer.  If this does not work, then you can have a corrupted client installed on the ESXi host.  If you have not installed anything on this subject, you can see on the re-download and burning a new installation CD and him give another go on installing ESXi host.

• Tecra M9 crashes when the apparatus or the lid close on Windows Vista Business

  Hello

  I have a Tecra M9 with Windows Vista business, and when I close the lid on the laptop that Windows puts on hold. When I open the lid, although wakes up the computer screen but it crashes.

  Even if I have the machine on the docking station when I disconnect the machine crashes.
  Any ideas? Any help much appreciated.

  Mike

  Hello

  I don't know what you mean in crashes, but I know that this can happen after the standby/hibernation mode, that this sound card is not recognized correctly. To resolve this problem, you must install the hotfix for Microsoft Vista (937077 KB) on the Microsoft network site: http://support.microsoft.com/kb/937077

  Just a question: have you noticed this problem since the first day or after a few days of use?

• Tecra A10 - Win7 upgrade Vista Business edition

  Dear Forum

  I'm curious, if you please, on a Tecra A10, which, at the time of purchase, had installed Windows Vista business.
  At the latest date the owner upgraded to Windows 7 (for free I think but I'm not sure).

  Windows 7 installation has become corrupted and need a new facility, but a backup has not been made.

  Please someone knows if the owner has a way of re - download Windows 7 free of charge, taking into account the existing Windows 7 installation is legal.

  Yours with thanks in advance
  Ian

  I put t know what previous owner did somehow but if possible install clean version of Win7 and not Vista Win7 upgrade. I did it on several machines Vista and now all the machines work perfectly with the clean version of Win7 32 bit.

• Vista Business on Tecra A8

  Hello everyone out there!

  I have a problem and a question... Please help...

  I bought a new Tecra A8 two weeks ago and it works with Vista Business.
  It was running OK for the past two weeks, but this weekend, I picked up a virus and had to clean. everything seemed fine and I was under the impression that he was abducted but do not know more.

  last night, Vista downloaded the latest updates of windows, while I was online and then invited to install it, which I accepted. There are 4 items to update and it took a lot of time to do. After the update, it asked to reboot, and now I'm sitting looking at a blue screen that says "please wait" and its's not going past! I let go an hour or so and then restarted, let him go again and its been almost two hours now, does nothing.

  What should I do?
  also, my question... I don't have the Vista installation disc or anything with the laptop? I've only had one disc, and it's the recovery disc. Now, the tech told me that I wouldn't need to do backups on the software as it was there and I just need to throw the disc? Vista is there? the record shows that if I run it, it will delete everything on the laptop and other devices connected to it?

  can I run the disc and it will put Vista on?

  Thank you
  C

  Hi Clarence

  > last night, Vista downloaded the latest updates of windows, while I was online and then invited to install it, which I accepted. There are 4 items to update and it took a lot of time to do. After the update, it asked to reboot and now I m sitting staring at a blue screen that says "please wait" and it s's not going past! I let go an hour or so and then restarted, let him go again and it of been almost two hours now, does nothing.

  Please believe me. It's really not easy to say which had installed Vista and why it goes no further.

  Regarding you question of recovery CD; Well, this CD contains everything you need. The OS (Vista), the drivers Toshiba, tools and utilities are packaged in the image file.
  If you get the laptop using this CD you will set the laptop to factory settings.
  But note; the recovery CD installation formats the entire HARD disk.
  You will lose all data and files from the HARD drive without any backups.
  So be careful ;)

  Greetings

• Windows Vista Business still don't not patched with SP1 via auto-mises to update or manual updates

  Our laptop Fujitsu is installed with Windows Vista Business. We have been used for about 1 year more, get the updates via automatic updates.

  I read that Vista has up to SP2. But check the details of the system shows that no service pack has been applied. So I trigger the update via IE-> tools-> Windows Update. He said that "no important updates available.

  I think that when you apply SP1, it will move from IE7 to IE8. So, we still have IE7.

  Why the service pack is not available for our case?

  Kind regards
  Ben

  A1. Yes.

  A2. You are 'safe' for now, as long as the computer kept fully patched to Windows Update otherwise. That being said, there will come a time in the not-too-distant that a computer without SP1 installed will not offer still updates all founded. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Window vista business 32 bit auto update not install SP1

  I have Window vista business 32 bit on Sony Vaio laptop. My automatic update of the window is on, a lot of updates were installed, I can't find the SP1.  I checked the updates, saw "the view update history" but can't find SP1.  Basic information system shows no service pack. 'Winver' shows Version 6.0 (6000 building). All other window updates have been installed except "Microsoft SQL Server 2005 Express edition service pack 3 (KB955706) who is still unable to install, do not know for what reason." I guess that there is no link between the failed SQL and SP1. It is after a complete reinstall of Vista 3-4 days back.

  Prior to the relocation is in that the original version, Vista SP1 was installed automatically by the Update window.
  I wonder if SP1 is already installed, but is not displayed or should I download and install it manually.

  goyalvimal

  Thank you. I was able to install SP1 and SP2 after the changes and the process you described.
  Thank you very much. goyalvimal

• 2 docking stations connectable to laptop at the same time without crashing my Windows Vista Business?

  I am a 67-year-old educator specialized for 10 children with special needs.  Eelle have degrees of autism and require very individualized changes of their standardized curriculum class in public schools.  My laptop was purchased in 2007, and while she is an old lady like me, she is reliable, powerful and small enough horse for me to work on the fly... I just want to her top in order to exploit one of my docking stations or both at the same time...

  Gateway model C-5815 notebook convertible; touchscreen navigation or Penabled; Intel Centrino Core 2 Duo processor; U 7500 1.06 GHZ GHZ 1.07; 4 GB RAM 32-bit operating system. Windows Vista Business... AND ONLY 2 USB PORTS from where I work, 2 external hard drives, 2 printers; 2 scanners; 1 external TV/monitor, 1 keyboard, 1 ball control, external speakers and sinc various gps units, Ipods, cell phones, etc etc etc...  I did all this by the docking station to a generic port Targus 3 unit and an extension of USB Belkin 7port...

  UPDATE  Mahalo for anyone who has tried to help me with this question... I read everything that was recommended, but nothing has addressed this issue directly. In the end, I just bit the bullett and both plugged to my laptop... She has chewed on everything what adding new material for some time, but then she moved and purred... I even tried plugging and unplugging does material of a docking, and still she purred...  Mahalo to look at the problem (not) with me... Apparently the business Windows Vista is quite difficult to adapt to both stations and host at the same time...

  Hi Susan,.

  I can tell you to check out this link, I'm sure you'll find a useful link.

  https://www.google.com/#hl=en&output=search&sclient=psy-ab&q=how+can+i+connect+my+docking+station+to+Windows+ehow&oq=how+can+i+connect+my+docking+station+to+Windows+ehow&aq=f&aqi=&aql=&gs_l=hp.3...456.11746.0.12146.54.33.0.0.0.1.1361.9466.3-3j1j0j2j5.11.0...0.0.jVAoex9_uGc&pbx=1&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.,cf.osb&fp=1ddfc57b13f7bd6e&biw=1249&bih=565

• Network Tecra M9 Vista installation problems

  Hello

  Have just got a Tecra M9-136 that I try to install with the English version of Vista Business.

  Vista refuses to connect to several websites:
  Update.Microsoft.com
  www.Microsoft.com
  www.Intel.com
  LiveUpdate.symantecliveupdate.com

  The links below works well even if:
  support. Microsoft.com
  www.Dlink.com
  www.LinkedIn.com
  www.VG.no
  www.Aftonbladet.se

  Someone else who have encountered this problem?

  Update;
  Found an incompatibility between Vista and my router DLINK-804 for dns lookups. Now I wonder just if Vista or DLINK is correct. Problem solved.

  KR,
  Björn? A¶RN Hasselberg

  Post edited by: bhasselberg

  > Found an incompatibility between Vista and my router DLINK-804 for dns lookups. Now I wonder just if Vista or DLINK is correct. Problem solved.

  Happy info. Thanks again for this information!

• Use of the filesystem in Windows Vista Business

  I had a neX61 in November last with Windows Vista Business and 120 GB disk space. I installed MS Office Standard 2007 and Visio, the disk of 2 months following its use grew much greated than the volume of data that I have placed on the system. I ran all the checks planned and all is good - no problems.

  However I could not always represent 35 + concerts. I downloaded a tool on the web that says basically structure sizes and directory trees and showed that I should have 35 gigs of spare, i.e. If I added the directory sizes, there was a huge amount still free. I couldn't get to the bottom of this.

  One day, Outlook 2007 crashed and rebuilds itself, when it rebuilt, suddenly space reappeared. Afterwards, I ran all the diagnosis of MS Outlook with no significant results. During the next 6 weeks, which space recovery file again gone so now its 50Gigs I losyt. I decided to uninstall Outlook, but so far it has not recovered from my disk space. Before that I use a hard reinstall of Vista Business Windoze of stuff over there?

  See you soon

  Andy,

  Right now, you have identified the exact problem, hell, I didn't even know this has the value automativcally of backup, the first 25Gigs swallowed the backup, then the next 4 subsequent in swallowed another 5 concerts a moment. Unfortunately, I had several images vmware which did not help matters.

  Thanks man, I owe you a virtual beer.

• How can I restore my empowering technology from acer asire Home premium back to factory with a recovery disk? All the factory settings have been destroyed, and windows vista ultimate sp1 has been installed on my computer.

  I have an acer aspire 4720z / with windows vista home premium / with the enabling technology / processor intel pentium dual core. I think I downloaded a program limewire lennex, it was suppose to be something else. Somehow that he closed my computor, luckly my cuzin was able to download windows vista ultimate SP1 64 2007 multimedia content on my laptop so that I can at least use MY COMP. But I think I like the version that is installed on my comp.better to the ultimate version on my comp.now, it does not seem as before prefome. Some things on my computer laptop don't prop wk. What should I do, go back to my version Home premium of moose? If so how to do that? I don't have a home premium recovery disc. I tried to install the updates of windows SP2 64 thought repairs that would set back 2 the origonal but settings it na not or at least update the ultimate version do you think I should do.

  If you have downloaded Vista Ultimate and not bought, you use pirate software.

  You will receive NO Support for pirated software.

  If this does not work, contact Acer:

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  3. the Windows version of the eRecovery program is stronger then the Dos Version. Below you will find the various features of the Windows version:

  Recovery settings: create backup files and change password

  ·        Picture of the backup snapshot (create a disk image of your system configuration)

  1. the system is able to make a CD/DVD image of the current state of mobile software including customer programs installed.

  2. This CD/DVD is usable in Windows and DOS of the program version.

  3. the drive should start, but isn't always.

  4 when a snapshot is in fact the image is on the D: partition and then can be burned to disc if eRecovery is said to.

  ·        Burn the Image to disc (create a backup disk)

  1. you can create 3-7 CD or DVD 1-2 such as those that were sent with the units before eRecovery.

  2. the serious CD are equal in usage to the system recovery CD and CD

  ·        Remove data from backup image of capture instant user (if available)

  1. This is how delete you the snapshot on the D: partition images

  ·        Password: (change the eRecovery password)

  1. measures: restore your system using an existing backup file or restore the default configuration in your system factory.

  2 backup copy using one of the snapshots has been filed or the original image on the D: partition.

  4. made eRecovery

  ·        When the hard drive is replaced the system loses its characteristics eRecovery. These features are on the hard drive and cannot be reinstalled.

  ·        When reinstalling from the CD/DVD's you will lose the eRecovery program but the DOS version can still function, as if uninstalled, you can not reinstall.

  ·        eRecovery uses Ghost (as well as the use of our recovery CD) to create snapshot images.

  ·        If the PQService partition is removed using fdisk or a utility under Windows, you may need to reinstall Windows.

  ·        If the system is recharged using the DOS version you retain the eRecovery feature

  Mick Murphy - Microsoft partner