Use of the filesystem in Windows Vista Business
I had a neX61 in November last with Windows Vista Business and 120 GB disk space. I installed MS Office Standard 2007 and Visio, the disk of 2 months following its use grew much greated than the volume of data that I have placed on the system. I ran all the checks planned and all is good - no problems.
However I could not always represent 35 + concerts. I downloaded a tool on the web that says basically structure sizes and directory trees and showed that I should have 35 gigs of spare, i.e. If I added the directory sizes, there was a huge amount still free. I couldn't get to the bottom of this.
One day, Outlook 2007 crashed and rebuilds itself, when it rebuilt, suddenly space reappeared. Afterwards, I ran all the diagnosis of MS Outlook with no significant results. During the next 6 weeks, which space recovery file again gone so now its 50Gigs I losyt. I decided to uninstall Outlook, but so far it has not recovered from my disk space. Before that I use a hard reinstall of Vista Business Windoze of stuff over there?
See you soon
Right now, you have identified the exact problem, hell, I didn't even know this has the value automativcally of backup, the first 25Gigs swallowed the backup, then the next 4 subsequent in swallowed another 5 concerts a moment. Unfortunately, I had several images vmware which did not help matters.
Thanks man, I owe you a virtual beer.
Tags: ThinkPad Notebooks
eror message when I connect a profile of the user of Windows Vista Business Service has no logon. Failed to load the user profile after wimdows update I have this problem I try safe mode but the gel keyboard, I try F12 boot does not work please, someone came to help me I need my computer for work
as you can not get into safe mode and work within the keyboard freezes in safe mode to do a startup repair disk
then do a restore of the system of breast
the link below is how to download and get a vista disk startup repair, which you can start from the
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
and to read this information to try to fix the user profile cannot be loaded problem
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:The user profile Service has not logon. User profile cannot be loaded.
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.
Original title: Vista Business
I have vista business installation, I can't install SP1 updates say its installed then it comes as (KB936330) has tried to install SP2, it says install SP1 first. It is a 32-bit is there anyway to put the SP1 that I know he finished in July I think?
Ignore DO NOT click DOWNLOAD YOU WANT to upgrade a SINGLE COMPUTER
The current time and the date now in Baja California (border region), the Mexico's 03:33Saturday, July 6, 2013
The time Pacific daylight time (PDT)-0700 UTC
UTC/GMT is 10:33 Saturday, July 6, 2013Current weather conditions in TijuanaCloudy64 ° F / 18 ° C
Hey, I'm trying to upgrade my Vista Business OS to Windows 7 Enterprise. During the 5th stage of the upgrade, i.e. While "transfer files, settings and programs", the process stops at 72% and a message error that "not enough disk space. I have more than 20 GB on my C: drive. I tried to go through different solutions of circumvention, but noon seem to work. Any help will be appreciated.
For lack of other options, I finally decided to do a clean install. Result: great! Looks like my laptop is brand new, and I have total control over the programs I want to install and the junk that I finally got away with. in any case, thanks for the answers!
I have to keep which dates back to the system restore to get my computer on the road. Whenever the update is installed I don't get past the first Screen Microsoft with the arrows. Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Hello everyone I'm starting to rebuild a computer acer laptop, I already have an OEM windows vista business CD I was wondering if there is a way to buy windows vista business product key without having to buy a new drive, I don't want to use crack to get windows vista professional and I can't find a Vista home basic oem disk for the laptop and I reallly cant afford to spend a lot of money to get a new drive for the laptop, I like windows vista professional, his safety is good since I use this laptop for my friends business and security of the files is important and this laptop supports windows aero and I do not see why need vista windows basic and in any case the main basic tone of oem vista on the laptop is on door of travel
Hi Dawn Berlitz,
If you have the copy of Windows Vista Business OEM of Acer, then you can contact Acer and see if they can provide you with a new product key.
Check the link for Acer support.
If you want to buy a new product key for Microsoft, you can contact the Microsoft order desk and check.
Check out the links for more information:
How to identify, locate, and replace a product key
Hope this information is useful.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
For some time I have been using a desktop computer with Windows Vista Business (32 Bit) and for a few months now Windows Live Messenger 8 kept stop without reason. I rejected, given that it happened only once a day, I have so open again and kept using it.
Recently I installed the version 2009 (14.0.8064.206), when Microsoft announced it through Messenger itself. Since I don't Live Messenger stops very often, sometimes it takes about half an hour after I connect, sometimes even when I'm not logged in. The message is "Windows Live Messenger has stopped working", no code error, no file name.
I have spent at various sites and tried the following without result:
Removal of the installation, run the clean installation tool and reinstalling
Repair the installation of Live Messenger
clear the Cache of Contacts
Run as administrator
Compatibility mode for Windows XP SP2
Is there anything else I can try? Please let me know.
You are welcome. Yes, please relay the State after the clean boot, as it will help to exclude all background programs. Please also pass on the model of your PC. Also, here are a few additional things to check.
1. Please check if you have the latest version of Adobe Flash installed.
2. Please also relay if the problem occurs when you try to share a file, using a Webcam, or by sending an Instant Message only.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve the issues___Thanks__Peter
I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems
The easiest way is with a crossover cable - a special wire to connect the two systems.
You can get one at your local computer store - they are not expensive.
Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
set up the network.
Or you can set up a wired or wireless network.
Setting up a network home
Home network, wireless network and computer networking Made Easy
Windows Vista tip: How to install and connect to a wireless network
Set up a computer-to-computer (ad hoc) network
How to set up an Ad Hoc wireless network in Windows Vista
Create an ad hoc WiFi network secure on Windows Vista
Networking tutorial home
Practically networked - everything you could possibly want to know.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
I have a Tecra M9 with Windows Vista business, and when I close the lid on the laptop that Windows puts on hold. When I open the lid, although wakes up the computer screen but it crashes.
Even if I have the machine on the docking station when I disconnect the machine crashes.
Any ideas? Any help much appreciated.
I don't know what you mean in crashes, but I know that this can happen after the standby/hibernation mode, that this sound card is not recognized correctly. To resolve this problem, you must install the hotfix for Microsoft Vista (937077 KB) on the Microsoft network site: http://support.microsoft.com/kb/937077
Just a question: have you noticed this problem since the first day or after a few days of use?
I forgot sony vaio (VGN-CS18GN) login password using windows vista business 32-bit processor. How should I proceed?
"What to do if you forget your Windows password"
"If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
See you soon.
Product key bad for the wrong version?
Recently the computer in business inherited from a friend, very fast and very good. Regardless of the operating system no - geniue, is with Vista Business, while the thumbnail of authentication is Vista Ultimate. I took a screenshot of what it says when I put Vista Ultimate product key: (it does not appear if you are unable to use it: P)
He said: "the product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista Business product key."
How would the installation of Windows Vista? My files would still be there when you need him? My drivers would still exist? No matter what to get deleted or become unusable? He would return to SP1? Any response is welcome.
You can order form of the manufacturer's recovery media.
The reason why the system as non-authentique shows currently is using a license in Volume KMS - these licenses must be re-activated at least every 6 months by connecting to the KMS user license activation server.
It will require a reformat and reinstall whatever you do, unless you can connect to the KMS - Volume media server cannot be upgraded under normal conditions.
I am a 67-year-old educator specialized for 10 children with special needs. Eelle have degrees of autism and require very individualized changes of their standardized curriculum class in public schools. My laptop was purchased in 2007, and while she is an old lady like me, she is reliable, powerful and small enough horse for me to work on the fly... I just want to her top in order to exploit one of my docking stations or both at the same time...
Gateway model C-5815 notebook convertible; touchscreen navigation or Penabled; Intel Centrino Core 2 Duo processor; U 7500 1.06 GHZ GHZ 1.07; 4 GB RAM 32-bit operating system. Windows Vista Business... AND ONLY 2 USB PORTS from where I work, 2 external hard drives, 2 printers; 2 scanners; 1 external TV/monitor, 1 keyboard, 1 ball control, external speakers and sinc various gps units, Ipods, cell phones, etc etc etc... I did all this by the docking station to a generic port Targus 3 unit and an extension of USB Belkin 7port...
UPDATE Mahalo for anyone who has tried to help me with this question... I read everything that was recommended, but nothing has addressed this issue directly. In the end, I just bit the bullett and both plugged to my laptop... She has chewed on everything what adding new material for some time, but then she moved and purred... I even tried plugging and unplugging does material of a docking, and still she purred... Mahalo to look at the problem (not) with me... Apparently the business Windows Vista is quite difficult to adapt to both stations and host at the same time...
I can tell you to check out this link, I'm sure you'll find a useful link.
Hello, I installed Microsoft Windows Vista Business 32-bit on a Dell Precision T3400 workstation, and I have also configured the strategies of groups for Non administrators. Basically, I disabled the removable drives, 'C' and had "only for non administrators." After edit in GP, the system has been precisely set and I am able to access the Administrators account and copy stuffs from my local drive on my USB key. But a few days later, I'm not able to use my USB or other external drives in Administrator account, it shows that 'inaccessible '. But I can't access local drives 'C' or '. Then I have to redo the group policies and it will last only for 3 days. Thanks :)
You are on a domain network?
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:
Failed to open all files with the extension .exe in Vista Business SP2. Dialog box appears and asks which program to use. Seems to have lost the info file assoc after virus removal.
Failed to open all files with the extension .exe in Vista Business SP2. Dialog box appears and asks which program to use. Seems to have lost the info file assoc after virus removal. Any suggestions?
Try the methods provided below and check if the problem persists.
Try the fix it or follow the manual for troubleshooting to solve the problem.
When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
The link above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
Download and run Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.
Microsoft safety scanner
Can someone help me, I can't reformat a laptop compact with a windows vista Business edition OS. I was wondering if I could use the recovery partition or do I have to use an installation CD. And by the way, just to give you a head I'm just a beginner and badly needs help. the problem I had is I get a strong signal for my WiFi, but again it is not connect to the internet it connects sometimes but then after I reboot my phone it comes back with the same problem, it connects to the internet, but I detect my network, someone told me to just reformat the entire system. I hope someone can give me a help step by step on how to do it. and also I do not see the product key for my system. your help would be greatly appreciated thanks
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Formatting/reinstalling is overkill. A bit like buying a new car because you have a flat tire.
To reinstall, you can use either the volume of recovery or the recovery disc, both should work pretty much the same. In general, the product key is located on the system like a sticker (on laptops usually on the bottom). If you can't find yours, you should contact the provider or your network administrator (and in fact, if there is a working system, you should contact them before doing anything).
Before you do this right, you can try this: click Start and type CMD. Right click on the menu entry that appears and choose "Run as Administrator". Click on continue in the UAC prompt. From the command line, run:
ipconfig / renew
Allow everyone to finish (return to the command line) before proceeding to the next. When you are finished, close the command prompt. See if that helps with your problems of connection.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
Maybe you are looking for
Last week, I received the tablet. Since then, the OTA update failed 3 times. So I searched around the Web and found a page which State to load the update.zip to SD card and install on recovery Menu: http://h30434.www3.HP.com/T5/Android/Pro-slate-8-up
My IX2 is connected to my router. I can detect and connect to all computers, laptops and mobile devices on the network accept to a certain PC. The problematic PC is the only one connected directly (by cable) to the router, all the rest are via Wi - F
Using Windows Easy Transfer to a Vista laptop to a desktop of Vista, the password on the desktop has changed and is no longer, I can access this computer. How can I fix this problem?
I can't get the printer software to operate. It keep telling me that I don't have the right operating system I am running windows xp professional. Tried to reload several times popular software with no luck?
I know that grantorchardvmware created an article a couple of years back where he uses the custom property POSSIBLE. SecurityGroup.NamesThis however does not seem to work with vRA 7.0.1, but there is also no new custom property when possible.If you t