TEHO with relief RTC via cross Cluster composition

Similar Questions

• How to connect cRIO with computer via cross cable

  I want to connect cRIO 9012 with my computer via cross cable and my computer with internet connection via WI - FI and I want to send messages through cRIO so cRIO uses my connection to the internet the computer to send mail.

  Here I have 2 connections 1. Wireless LAN connection IE between cRIO, computers and 2) between my computer and the internet. Now, I want to send a mail through cRIO via my computer.

  Thank you.

  This will get you started with the establishment of the link connection:

  http://digital.NI.com/public.nsf/allkb/4E13E46226E67642862576A4007BC353

  For what is to turn your desktop into a gateway for the cRIO, I've never tried, but it might work for you:

  http://support.Microsoft.com/kb/306126

  Please let us know how it goes!

• Can I share app with someone else via drop Pages?

  HI - anyone know, please, if I can share the Pages app with a colleague via Airdrop? Is it possible and is it legal?

  In addition, no one knows if Apple will make possible on Pages linking text as it was with the old app.

  Thank you.

  Betsy

  No, your colleague will buy and download the app, if they want on their iPad.

  For features of the application, try to leave feedback to Apple: http://www.apple.com/feedback/pages_ios.html

• Unable to connect with the network via iphone or ipad

  Unable to connect the Apple TV (2nd generation) with the network via Wi - Fi using the remote app!

  The remote application required the devices to be on the same network, and home sharing enabled on Apple TV. The physical remote control would be necessary for the installation if this has not been done already

• trying to communicate with a computer via an RS232 interface.

  Hi, I would like to communicate with my computer via RS232 DB - 25 side of machine that is configured as a DCE and DB - 9 my side PC as DTE, the computer only uses pin 2 (serial data in), pin 3 (serial data out) and PIN 7 a pattern. I wired the pins straight through except the ground which is in the DB 9 pin 5, so I tried to connect pin 2 pin 2 and 3 pin to pin, pin 7 to pin 5, but I couldn't get through my machine, then I tried 3 machine spindle pin 2 of my pc , machine pin 2 pin 3 pin 5-7 pc, unfortunately cannot also. I set everything correctly, as I think, but somehow could not do.

  (in the if said manual pc a DB9 so connecting db-9 to db-25 cable modem) - what a sense.

  I'm asking for help on this issue. Thanks for any help.

  Yes, of course do you. Who is stated in the manual. In MAX, you would use \r\n.

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• Interaction with the BlackBerry via USB

  This may be the wrong forum for this question, and if so, please point me to one that is more appropriate, because it doesn't seem to be a forum of developers on this segment of use cases.

  Is there a material that interacts with the BlackBerry through the USB connection?  The BlackBerry Desktop Manager can make quite a range of things with the BlackBerry via a USB connection.  None of this is publicly available or documented?  If this isn't the case, it is fine, please tell me if I can stop looking in vain for him.

  There was an example of code, packed with JDE 4.1, I think, who communicates with the BlackBerry via USB using BBDevMgr as a resource com  There is a lack of documentation of this interface and its capabilities and limitations.  It is still supported?  If so, where can I find the documentation for it?

  Thank you for your time.

  It is still supported.  You can find the documentation in the "use USB or serial port connections" section of the BlackBerry Java development environment development Guide found here:

  http://NA.BlackBerry.com/eng/support/docs/subcategories/?usertype=21&category=BlackBerry+Java+applic...

• BlackBerry Torch 9860 smartphones does not connect with the pc via the USB port.

  We have a new Torch 9860 which does not connect with a PC via the USB port.  What should do?

  SlaKir wrote:

  The answer is YES

  Well, then your USB port is likely.

  Restart the PC and BlackBerry (with smart BlackBerry power onthe phone, remove the battery for a minute and then reinsert the battery to restart).

  Then, connect with the USB cable and a rear main USB port at the back of the PC, not a front USB port.

  Hear a ringing or sound from the PC indicating that the BlackBerry is connected?

  Start the BlackBerry Desktop Manager software. Give it a minute to recognize the connected BlackBerry device... you see the code PIN of BlackBerry on the PC in the BlackBerry Desktop software?

• I try to register with a mixer via a usb connection. I can tell I have the settings correct, selected in the hardware Audio section. It worked before, but it's not. Any ideas? It's driving me crazy!

  I try to register with a mixer via a usb connection. I can tell I have the settings correct, selected in the hardware Audio section. It worked before, but it's not. Any ideas? It's driving me crazy!

  That entry of casings do you use on the Yamaha and what you've plugged into them? With the whole level at about 01:00 controls, as Neil suggests, increase the Gain until the red LED on the channel starts flashing. And then put it down a bit so that it no longer lights except very occasionally. You should then see the green signal LED flashes but not the red. You should then have reasonable level in hearing.

• What trigger is fired when the user closes a Web via cross sign which is in the upper right

  Dear all,

  I have a form that requires a separate canvas. Please tell me what trigger is fired when user close a canvas via cross sign that exists in the upper right (the sign of the cross appear as the corresponding window contains the property of: close the permit YES).

  Concerning

  Rajat

  Never heard of a trigger key to closing.

  As they said above, when you close a window, CLOSING of WINDOW-WHEN trigger fires.

  There you can examine the value of the: system.event_window, which bears the name of the window that fired the trigger.

  A typical use of this must publish a Do_Key ('EXIT_FORM') in your when relaxation window closed

  You don't need to check the: system.event_window, you can have several KEY-RELEASE triggers at various levels if necessary and they will attack the function of closing the window.

• Secure RestFul WebService call with basic authorization via https

  Hello
  
  is it possible to call a secure RestFul WebService with basic authorization via https to APEX?
  
  Database: Oracle 11g XE
  APEX: 4.2.1
  
  I have a solution by calling the Java Web service, which was called from the database via a scheduled task (run).
  
  As my hosting partner does not support Java, I'm looking for another option.
  
  Concerning
  Markus

  Hello

  Oracle XE can USE a wallet with utl_http without problem. Just create a portfolio from a version supporting the creation of the portfolio and copy this portfolio to your XE machine and use it. It really works.

  ---
  Lavenu
  MaxApex accommodation
  http://www.maxapex.com

  Published by: Richard on January 23, 2013 23:32

• txts to the relief effort Red Cross Haiti rise at the mil $7

  

  Send a text message to 90999 with the word HAITI

  and you will automatically donate $ 10 to the Red Cross for disaster relief via your phone bill.

  You can repeat sending the text as many times as you want to make a larger donation.

  It's as simple as that.

  Estimates are that number of dead could be in the hundreds of thousands.

  It is legitimate.

  Here's the release on the site of the Red Cross:

  http://Newsroom.redcross.org/2010/01/12/disaster-alert-earthquake-in-Haiti/

  Post edited by: slsmag. Adding info on giving repeat and link to the press release

  You can otherwise justify your post, that I would consider it spam because we do not want to get people to spout for unnecessary things, if you have good intentions. Know what I mean?

  Mark

  Support Forums Manager

• Setup Motorola Atrix with Google TV via a HDMI device problem, help?

  I'm curious to know if anyone has had problems with implementation of devices via HDMI or using the Motorola Atrix (I'll be crossed this announcement on the forums Android and Motorola too to see what response I'll be there too).

  "After connecting my Atrix, turned to the Google TV (29') using the HDMI cable I got with the phone, I go to 'Settings' > 'Video input' > HDMI settings" > "Device list" > and click on "Enable", I get an error message that says:

  No HDMI devices have been found. Please check the connections.

  Thanks to a default function I chose, the "remote control" screen on my Atrix.

  I tried all four cards HDMI on the TV and received the same error message.

  Anyone would be able to help me solve this?

  I have the Sony NSX24GT1 24 and my phone is a Motorola Atrix Mobile phone black MB860 running on the Android 2.3.4 version.

  p.s. I really like my phone and I really like my TV and the possibility of using the two together! I really hope I can get help with this. Thank you!!

  Fixed! I had to press the input button on the very complicated, heavy Google TV remote control button (bad design).

• How to open the files .dll automatically with Adobe Reader via Firefox?

  Hello

  When I print labels eBay via Firefox, a .dll file is downloaded. This used to automatically open in Adobe Reader, but now it opens as a text document in TextEdit, so I have to manually open Adobe Reader, change the options to display "all files", then find the .dll file and open it.

  When I try to change the default application in the preferences of Firefox, I can't find anything with the content type "dll".

  Is there a way to have Firefox automatically opens files .dll with Adobe Reader?

  Any help would be appreciated, thanks!

  Steve

  Sorry for the delay, but yes, just stop Firefox so that the mimeTypes.rdf file is released.

• using the iMac 27 inch mid 2011 as an external monitor with a PC via mini DisplayPort

  I find conflicting information via web search to be able to use my iMac 27 inches, mid-2011 as an external monitor with a PC. Is it possible to use the iMac as an external display via the Display Mode target between Thunderbolt port of the iMac with a PC equipped with a mini DisplayPort?

  Of course, I hear it's possible with the appropriate cable. But if it is not possible, I would like to know for sure.

  Thanks in advance for your help with this. _henry

  Target display mode is Mac to Mac only. Use your iMac as a display with the target - Apple Support Display Mode