Telepresence room adds CTM

Similar Questions

• Driver of Cisco Telepresence - room LoopBack

  Hello world

  Is it possible to create a meeting room on Cisco Telepresence driver that will return the video to the appellant alone in the room? As the [email protected] / * / Cisco's Sip URI? (A kind of selfview room)

  Thanks for your help.

  It is possible to show only one participant connected to a MCU conference selfview, but not for telepresence Server conferences.  It comes without caring if the driver is involved or not.  The service provided by Cisco closure is obtained with the C40/60 endpoints where the audio and the video plays in a loop directly to the connected call (output HDMI to HDMI-in, output audio RCA audio-in RCA/RCA).

• Help me understand how the scheduling TMS add participating really means.

  Hello

  I have a MSD working with the conductor and telepresence server.

  Can I create a reservation and incoming and outgoing calls to telepresence rooms without any problems.

  I n ' have local endpoint registered to my TMS so I add participant external tab, let's say I add 5 participants for H323 and SIP 5, so I have a meeting room with 10 reserved ports.

  During the call to the meeting instead that it will fall into these 10 port reservation, instead, he join as an adhoc appeal and now the meeting room extended to 11 participants with 1 connected and not connected 10.

  Why?

  Thanks in advance.

  NATT

  Seems to be a bug, CSCuv66300.

  Suggest you to contact your Account Manager and bring their to their attention so that they can raise this issue at the DRINK for you.  Clients more that draw attention to a particular request of the bug or development, the greater chance of it running.

• Licenses of telepresence

  Hi all

  Hope this does not sound very stupid. What is the difference between the following license two of the Cisco telepresence room:

  (1) LIC-MX200-MS - MX200 G2 MultiSite Option

  (2) LIC-TP-SMP-EP - shared multi-party Lic for 1 session simultaneous Inc. 2 RMS license.

  Thanks in advance,

  The Multisite option key is so you can use the feature embedded four-way Conference the MX200 G2, where you can connect up to three other participants without needing a dedicated as a server MCU/telepresence conference bridge.  You can learn more about the multisite functionality in the MX200 G2 data sheet.

  Multiparty license shared for those who have the conductor and a telepresence server, licensed SMP can host a single conference with several participants up to the capacity of the telepresence server.  See the multiparty license - a-ice for more information.

• On the presentation telepresence Codec provides 30 FPS

  Cisco document said "a codec of presentation allow you to display 30 frames per second for presentations.

  I accumulate a CTS 1300 with the codec of the presentation to a client.  While when I introduce PPT to an external monitor through presentation codec, I found that the rate is 5 frames per second in the log file, not 30 FPS.

  My question is:

  How can I adjust the frame rate of 30 frames per second?   All configurations must be accomplished?     Thank you very much!

  Journal:

  Sharing Local INFO: flow presentation negotiated at 5 fps

  Hello Zhang,

  Please make sure that the other end of the telepresence room has also a codec of presentation. So that the presentation to run at 30 fps, two telepresence rooms (assuming that P2P meeting) should have codecs presentation.

  Kind regards

  Shashi

• Communication between two Sites

  Hello

  I need help on this particular question.

  I have a client that wants to connect two rooms by a conference of Cisco, he already has tv monitors so he does not want to invest on the screens of Cisco, but he needs the codec with the camera for video meeting with the other site.

  He already has the CUCM, my question is:

  (1) do I need a license to add codecs to the CUCM?

  (2) is licensed for each necessary codec?

  Thanks in advance,

  Hi Andres,

  (1) Yes, you need to license telepresence room to add the codec.

  (2) each Codec would require licensed telepresence room.

  For example: in your case if you go with the SX10, you will need two license like you it will be deployed in the two rooms.

  Please note so useful.

  Kind regards

  Adarsh Chauhan

• TP 1300 - Design

  All,

  What are the rules for the number of participants in a telepresence room?

  I'll use a 1300 TP a room for 8 people is 10 m depth of 4 m wide. I know that the recommendation is for 6 people, but what are the problems that I have. Do I need to worry about the layout of the room?

  Could someone help me?

  Thanks in advance.

  Lucian,

  The sensors are the pickups, they detect that the camera must be active. 6 external microphones are available.

  You will find a lot of documentation here: telepresencepartners.cisco.com.

  Kind regards

  Samuel

• Interop MCU

  Hey guys, good to see a forum of telepresence. I have a question for the new MCU CUVC-5230. I guess it will give telepresence and H323 interoperability, but it will also eliminate the need for Community trade marks?

  I guess that the answer is no, but just making sure.

  Thank you.

  Ohamien

  The CUVC 'normal' on the endpoints of telepresence through the CTMS during a multipoint interop call. Community trade mark is obligatory for all multipoint telepresence interop calls.

• Presenter and moderator

  Is this possible in Acrobat Connect Pro to be a host and presenter that is to host a webinar and also participate? Thank you

  Hi Goodelgin,

  You can reach the room add to have two types of user.

  Also a host in the room can have all privileges to change the role of himself.

  So even if you are a host in the room can change its role to user as a result.

  Curious to know which scenario you are trying to run.

  I hope this helps!

  Thank you

  Nikhil

• SharedObject using

  I'm trying to use the part of the CAA SharedObject and fall on some issues. I created a SharedObject based on a property in the application. When the property I put the SharedObject on the new value. My goal is to be able to compare the values with everyone on the system so I set up a group of event handlers to see when properties are added or changed so I can see if any of them match my value. But when I debug the application in Flash Builder, added or modified properties never pull when I change it as another user in the room. Here is the code:

  protected function cSession_synchronizationChangeHandler(event:SessionEvent):void
  {
       if( event.type == SessionEvent.SYNCHRONIZATION_CHANGE )
       {
            var config:NodeConfiguration = new NodeConfiguration();
                 config.modifyAnyItem = false;
                 config.userDependentItems = true;
  
            sharedColor = new com.adobe.rtc.sharedModel.SharedObject();
            sharedColor.nodeName = cSession.userManager.myUserID + "_color";
            sharedColor.sharedID = "color";
            sharedColor.setNodeConfiguration(config);
            sharedColor.subscribe();
            sharedColor.addEventListener(SharedObjectEvent.PROPERTY_ADD, onPropertyAdd);
            sharedColor.addEventListener(SharedObjectEvent.PROPERTY_CHANGE, onPropertyChange);                    
       }
  }
                 
  protected function onPropertyAdd(event:SharedObjectEvent):void
  {
       trace('test');
  }
                 
  protected function onPropertyChange(event:SharedObjectEvent):void
  {
       trace('test');
  }
  

  Shouldn't the functions onPropertyAdd and late onPropertyChange when another user in the room adds or modifies something? What I am doing wrong?

  Thanks in advance.

  = Ryan

  [email protected]

  Hi Ryan,

  Change this line to

  sharedColor.nodeName = cSession.userManager.myUserID + "_color";
  

  TO

  sharedColor.nodeName = "a static & unmutating variable" + "_color"; // or justsharedColor.nodeName = "_color"
  

  will fix the problem.

  What is happening is that each user is to create its own node and update items in the node. Thus, each user was practically in his own world. Other users were not receiving updates as they will have listened to the sharedObject events in their node.

  Thank you

  Arun

• Telepresence Addon for Exchange to book rooms video outlook

  Hi guys

  can someone tell where I can download the addon to install the application to the video meeting from outlook room booking?

  You can download here:

  http://software.Cisco.com/download/release.html?mdfid=283694653&flowid=46129&softwareid=280886992&release=TMSXE_4.0.1&relind=available&rellifecycle=&RelType=latest

  So that it work, if you have not already, you will need to purchase one of the option buttons that will allow your TMS communicate with TMSXE.  You can find more information at the bottom of the TMSXE data sheet:

  http://www.Cisco.com/c/en/us/products/collateral/conferencing/Telepresence-management-suite-TMS/data_sheet_c78-704865.html

• When I try to add presets to light room it is said that room light stopped working and stops, I tried unloading and reloading to get the same thing.what can I do? Thank you

  When I try to add presets to light room it is said that room light stopped working and stops, I tried unloading and reloading to get the same thing.what can I do? Thank you

  Please close Lightroom and then go to the following location in the Explorer: C:\Users\UserName\AppData\Roaming\Adobe\Lightroom\Develop Presets\User Presets

  Paste the predefined settings file in the location above, then try to open Lightroom and control the Module Development, if you are able to display Presets or not.

• I have photoshop and light room formula already and that you want to add illustrator to my current plan but to know how much it will cost me?

  I have photoshop and light room formula already and that you want to add illustrator to my current plan but to know how much it will cost me?

  Rebecca,

  Unfortunately, you can't get a normal subscription, no way to add it to your package.

  Added to your current price, I'm afraid that it will be close to the price of the entire subscription cloud.

  http://www.Adobe.com/downloads.html?promoid=JZEFS

• Been updated my profile add my personal e-mail to Adobe to recover. I received the verification email, but there is now no room in the form of adobe to stick it to. What can we do?

  Been updated my profile add my personal e-mail to Adobe to recover. I received the verification email, but there is now no room in the form of adobe to stick it to. What I can / Adobe done to correct?

  The forum software... below might help Adobe rents

  User manual for the community of Adobe (forums) https://forums.adobe.com/docs/DOC-4714

  -or http://docs.jivesoftware.com/jive/7.0/community_user/index.jsp

• I bought the 5 room that I want to add it to another computer, where I can load?

  I bought the light Room 5 as a charge down.  I would like to install it on another computer, but I don't know where to find the download.  I have the purchase code is enough to download the program.  Any ideas how to do this?

  Please try removing http:// which should be https://helpx.adobe.com/lightroom/kb/lightroom-downloads.html

  I would like to know if it works!